The values of the shear strength parameters with respect to (a) total stress and (b) effective stress should be determined. Table 1 of test categories (kN/m) pressure everywhere
What's the synonym for effective?
Effective can also be referred to as effectual, efficacious, and efficient. Effective emphasizes the actual creation of or the ability to produce an effect, even though all of these words indicate "creating or capable of producing a result."
successful in getting the desired outcomes: The usage of shadow in the lighting for the production was quite effective. She is a fantastic educator.
Know more about respect Visit:
https://brainly.com/question/19711470
#SPJ1
Complete the lookup expression. The lookup should output IP, EMAIL, and DEPT values as ip, email, and dept. These lookup output fields should overwrite existing fields. | lookup newEmployees.csv USERNAME as Username
a) | lookup newEmployees.csv USERNAME as Username OUTPUT lower(IP,EMAIL,DEPT)
b) | lookup newEmployees.csv USERNAME as Username OUTPUT IP as ip, EMAIL as email, DEPT as dept
c) | lookup newEmployees.csv USERNAME as Username OUTPUTNEW lower(IP,EMAIL,DEPT)
d) | lookup newEmployees.csv USERNAME as Username OUTPUTNEW IP as ip, EMAIL as email, DEPT as dept
b) | lookup newEmployees.csv USERNAME as Username OUTPUT IP as ip, EMAIL as email, DEPT as dept
A lookup table can be created from any search you've conducted using the outputlookup command.
How does Splunk define outputlookup? A lookup table can be created from any search you've conducted using the outputlookup command. In order to enable the data to be accessed later using an inputlookup command, this command converts search results into lookup tables.You can add a field from an external source using Splunk Lookup if the value in the event data matches the field you want to add. While comparing various event fields, it enhances the data. Many event fields and destination fields can be input into the Splunk lookup command.A lookup table can be created from any search you've conducted using the outputlookup command.To learn more about outputlookup refer to:
https://brainly.com/question/30154192
#SPJ1
The plain view doctrine refers to the power of law enforcement to seize any contraband materials that are in plain view, even if the officers don't have a specific warrent for them. Consider the case when during a warrant house search, the law enforcement officers are looking for evidence of a digital crime involving credit card fraud. While in the house, they find no evidence of credit card fraud or any other crime that involves credit cards. While looking around they found various pirated movies and DVD duplication equipment. Can they seize this equipment and arrest the owners? Select one: a. No they can't because at that moment they can't tell if owners had the right to copy and distribute those movies can. The plain view doctrine applies and anything in plain site that is considered contraband materials can be seized a warrant search even if the warrant is not specifically for that material Ob. Yes they during c. No, they can't. The owners cannot be arrested because the warrant did not specifically stated they were looking for pirated (th movies d. Yes they can under the PATRIOT Act of 2001 e. No they can't do that because there is an amendment that protects the owners from illegal search and seizure
Option B is correct.
As already stated to seize any contraband material, even if they do not have a specific warrant. and this statement is also written in option B.
What do you mean by search warrant?It is best to look in a specific location for a specific item or set of items. A search warrant must be issued by a judge that specifies the precise location to be searched and the items to be seized.
The warrant also needs to state why the search is necessary. Although search warrants can be issued in civil cases as well, they are typically used in criminal investigations. A search warrant must include enough details to support a reasonable suspicion that the items listed there will be found during the search.
The warrant must also be properly served and executed, which requires that all instructions contained in the warrant's text be followed by the law enforcement officials executing it.
Learn more about search warrant refer :
https://brainly.com/question/6656767
#SPJ4
Foe The Following Truth Tables, Provide The Corresponding Boolean Equation. Do Not Simplify The Equations.
Boolean Algebra Truth Tables. Boolean Algebra Expressions can be used to construct digital sense verity tables for their separate functions.
Define Boolean Equation?
A system of algebra in which there are only two possible values for a variable( frequently expressed as true and false or as 1 and 0) and in which the introductory operations are the logical operations AND and OR. Boolean( logical) equations are expressed in a way analogous to mathmatical equations. Variables in Boolean expressions however, have only two possible values, true or false.
For an equation using a logical expression, the equivalant sides of the equal sign, = , will be only true or false too. For a 2- input AND gate, the affair Q is true if BOTH input A “ AND ” input B are both true, giving the Boolean Expression of( Q = A and B). Note that the Boolean Expression for a two input AND gate can be written asA.B or just simply AB without the decimal point.
To learn more about Boolean refers to:
brainly.com/question/2467366
#SPJ4
Which of the following best describes the devices that will help prevent moisture from collecting in raceway systems?a. Elbowsb. Integral drainsc. Strainersd. Seal-off fittings
Electrical raceways in hazardous environments can be safely installed using rigid metallic conduit (RMC). Sites in Class II A "Class II Place" is the second category of the hazardous location.
Combustible dust in sufficient quantities to be explosive or ignitable is what gives this classification its name. In order to reduce the flow of gases and vapors via the conduit and to prevent the spread of flames from one area of the electrical installation to another, seals are included in the conduit and cable systems. Division 1 goods are subjected to stricter regulations than Class I Division 2 lights. An explosion-containment capability is not necessary for a light to be classified as Division 2. rather, it must be identified too.
To know more about sufficient from the given link
https://brainly.com/question/29388808
#SPJ4
ROPS must be installed on rubber-tired heavy equipment and:
A. Motor graders.
B. Crawler tractors and loaders.
C. Wheel-type tractors.
D. All of these.
ROPS must be installed on rubber-tired heavy equipment along with all of Metal Graders, Crawler tractors and loaders and Wheel-type tractors.
What are ROPS ?On tractors and other agricultural machinery, rollover protection structures (ROPS) are metal bars (also known as rollbars), frames, or crush resistant cabs that are intended to provide an operator with a safe area in the event of a rollover or overturn1.
Roll bars or roll cages known as Rollover Protection Structures (ROPS) are made for agricultural tractors with wheels and tracks. When a rollover happens, ROPS are made to surround the operator in a protective zone. The purpose of ROPS is to stop the operator from being ejected out of the protected area.
Roll bars or roll cages known as Rollover Protection Structures (ROPS) are made for agricultural tractors with wheels and tracks. When a rollover happens, ROPS are made to surround the operator in a protective zone.
ROPS must be installed on rubber-tired heavy equipment along with all of Metal Graders, Crawler tractors and loaders and Wheel-type tractors.
To learn more about ROPS refer to :
https://brainly.com/question/27563631
#SPJ1
an architect is designing an overhang above a sliding glass door. during the heat of the summer, the architect wants the overhang to prevent the rays of the sun from striking the glass at noon
The overhang can only be 1/3 of the length of the beam, but it is more common to have a shorter overhang. This is the general rule.
How much excess overhang should a roof have?If drip edge flashing is installed, the shingles' edge should hang over the roof between an inch and an inch and a half, or between a half-inch and three-quarters of an inch. If there is too much overhang, high winds could blow the shingles off; Too little water can allow water to seep into fascia boards or rakes.
How wide is the overhang?The overhang on a typical countertop is typically 112 inches. Although some countertops have an overhang that is either longer or shorter, this is typically the standard length for overhangs in homes. Kitchen islands typically have an overhang of 12 inches, which is the standard length.
To know more about beam visit :-
https://brainly.com/question/10785313
#SPJ4
a clutch is required for an electric motor transmitting 25 hp at 800 rpm. the clutch will be clamped directly to the motor plate housing and will have the same housing diameter as the motor, which is 5.5 in. the minimum radial tolerance between the outside diameter of the housing and the outside diameter of the clutch disc is 0.25 in. the clutch output shaft has the same diameter as the motor shaft, which is 0.625 in. design a multiple disc clutch for this application. define the assumptions and design options. specify the clutch material, outer disc radius, inner disc radius, and required applied force.
When applying the uniform wear hypothesis, we assume a lower torque carving capability for the specified dimensions to be on the safe side. When a clutch is brand-new, it will only have a little increase in torque carrying ability.
An automotive vehicle's multi-plate clutch increases the amount of power sent from the engine to the transmission shaft while also making up for torque loss brought on by slippage. Heavy equipment, commercial vehicles, special purpose military vehicles, racing automobiles, and motorbikes all employ this clutch. The following fundamental factors are covered while designing clutches: friction components during engagement, friction material, single- or multi-plate designs, cooling methods, and hardware. Each is examined in turn after an explanation of clutch engagement operation. The friction liner of the disc has a coefficient of friction of 0.25. The friction lining's bore radius is 25 mm.
To learn more about torque click the link below:
brainly.com/question/25708791
#SPJ4
each multiwire branch circuit shall be provided with a means that will simultaneously disconnect all ungrounded conductors at the point where the branch circuit originates. t or f
According to the question, the given statement of conductors at the point where the branch circuit originates is true.
What is conductors?
Conductors are materials that allow the flow of electrical energy. They are typically made of materials that contain free electrons, such as metals, that can move around freely when an electrical charge is applied. Conductors are essential for the functioning of electrical circuits and are used in a variety of applications from electrical wiring to power transmission. In addition to metals, other materials like semiconductors, graphite, and liquids can also be used as conductors. Conductors have a wide range of uses and are necessary for any type of electrical device or system. They are also used in various fields like engineering, telecommunications, physics, and computer science.
To learn more about conductors
https://brainly.com/question/22754783
#SPJ4
the full-load current of a 25-horsepower, 480-volt, 3-phase, squirrel cage induction motor is ? .
The correct answer is 10 HP motor takes 14 Amps of electricity at 415 Volts, 50 Hertz (Approx).
Service-entrance (SE) cable usage, installation, and construction requirements are covered in Article 338 of the National Electrical Code (NEC). We apply the following equation to 3-phase systems: kW is equal to (V I PF 1.732) 1,000. I = 1,000kW 1.732V is what you get when you solve this equation for "I," assuming unity PF once more. Not less than two small-appliance branch circuits must supply receptacles placed in kitchens to service countertop surfaces. One or both of these circuits may also be used to supply receptacle outlets in the same kitchen and other rooms listed in 210.52(B) (1).
To learn more about HP motor click the link below:
brainly.com/question/28441076
#SPJ4
after having done the hand calculation in the preceding exercise, you should now be able to implement the algorithm for computing the bottle volume. complete the program below.
The algorithm for computing the bottle volume is as follows:
#include<iostream>
using namespace std;
int main()
{
cout<<"I took the one less traveled by,"<<endl;
cout<<"And that has made all the difference."<<endl;
cout<<" by Robert Frost"<<endl;
return 0;
}
What is algorithm?A mathematical problem can be solved using an algorithm in a finite number of steps, frequently involving recursive operations. An algorithm is a set of finite rules or instructions to be followed in calculations or other problem-solving operations.
In the same way that only the standard recipe would be followed when cooking rather than any written instructions Similar to this, not all programming instructions written down are algorithms. Some instructions must meet the following criteria in order to qualify as an algorithm:
The algorithm should be unambiguous and clear. Each of its steps must have a distinct meaning and be transparent in all respects.Well-Defined Inputs: If an algorithm requests inputs, those inputs should meet certain criteria.Learn more about algorithm
https://brainly.com/question/22984934
#SPJ4
Hand tools are powered instruments, which can be very hazardous when improperly used due to their power 1 source. a) True b) False Which of the following is not a correct general precaution that should be followed by all power tool users? a) Keep cords and hoses away from heat, oil, and sharp edges b) Secure work with clamps or a vise c) Handle tools by the cord or hose d) Disconnect tools when not in use o Safety guards must never be removed when a tool is being used. a) True Ob) False What is the main danger associated with pneumatic tools? a) Dangerous levels of noise brought upon by heavy duty tools b) Explosive or flammable fuel source c) Electric shock from the tool's power source d) Getting hit by a tool's attachment or fastener The operating control on hand-held power tools must be located as to minimize the possibility of accidental 5 operation, if such accidental operation would constitute a hazard to employees. a) True Ob) False What requirements are necessary to protect an electric tool user from shock? a) Tools must either have a three-wire cord and be grounded b) Tools must be double insulated or powered by a low-voltage isolation transformer c) Both A and B d) None of the above All portable, power-driven circular saws having a blade diameter greater than 3 in. must be equipped with / guards above and below the base plate or shoe a) b) True False An important safety precaution to remember when operating powder-actuated tool is: 8 a) Ensure the tool remains loaded for intended use if not immediately needed b) Operate the tool at least five feet away from the intended work surface c) Inspect it before use and determine that it is clean and that all moving parts operate freely d) Use these tools only in flammable atmospheres o Hydraulic jacks exposed to freezing temperatures must be kept warm with an internal temperature lift. a) True b) False Who is responsible for the safe conditions of tools and equipment used in the workplace? 10 a) Employers b) Supervisors c) Manufacturers d) Employees
Safety guards must never be removed when a tool is being used.
what is a tool?
A piece of equipment that you use with your hands to make or repair something: power tools. machine tools. something that helps you to do a particular activity: A free low-interest credit card can be a useful budgeting tool.According to the Urban Dictionary, a 'tool' is someone who lacks the mental capacity to know he or she is being used. While it's an amusing slang term, it wasn't what I had in mind when I decided to write this blog post.For example, hammer, saw etc. Also, any implement, instrument, or utensil held in the hand and used to form, shape, fasten, add to, take away from, or otherwise change something by cutting, hitting, digging, rubbing, etc.: knives, saws, hammers, shovels, rakes, etc. are tools. TYPES OF TOOLS. Power tools.To learn more about instruement refers to:
https://brainly.com/question/13547403
#SPJ4
When using a tool, safety guards must never be removed is a true statement.
What is a device?a piece of equipment that you use to make or fix something yourself: hand tools. tools for machines something that makes it easier for you to do a certain activity: A free credit card with low interest rates can be a useful tool for budgeting.
A person who does not have the mental capacity to recognize that they are being used is a "tool," as defined by the Urban Dictionary. Although it is a humorous slang term, I did not intend to use it in this blog post.
such as a hammer, saw, etc. Also, any tool, instrument, or utensil that is held in the hand and is used to change something by cutting, hitting, digging, rubbing, etc. to form, shape, fasten, add to, take away from, or in any other way: shovels, rakes, knives, saws, hammers, and others are devices. a variety of tools Powerful tools
Learn more about hand tools:
brainly.com/question/18041186
#SPJ4
Consider a device which takes three inputs A, B and C and has one output, Z. It is to output a B if A=1 and it is to output C if A=0. So if A=1, B=0 and C=1 the output should be "0".
a) Write a truth table for this device.
A truth table has a final column that displays all the outcomes of the logical process the table represents
What is the truth table.A truth table has a final column that displays all the outcomes of the logical process the table represents, with one column for each input variable (for instance, A and B) (for example, A XOR B).
A truth table is a tabular representation of all the possible input and output value combinations. The name refers to a mathematical table that displays all potential outcomes from all plausible situations that are thought to be true.
A B C Y
0 0 0 1
0 0 1 0
0 0 0 1
On simplifying
Y = AB + BC + AC = 0
To learn more about truth table refer to:
https://brainly.com/question/28032966
#SPJ4
part a: design and conduct a simulation to estimate the likelihood that the professional golfer will sink at least four holes-in-one during a single game. be sure to explain the representations and show all the work for your trials and outcomes. (6 points)
Come up with a simulation. Create and run a simulation to determine the probability that the golfer will complete at least two holes-in-one in a single game. Verify that you have completed all of the five simulation-related stages.
What in probability is a simulation?Simulating entails employing a probability model to feign a random event, typically on a computer. We can simulate outcomes and event occurrences using a probability model.
What is the likelihood that a player in a round of golf has 0 or 1 hole in one?In a single game of golf, there is a zero (or 25%) chance that the player will get 0 or 1 hole-in-one. Two out of the eight games meet this requirement, thus we know this.
To know more about simulation visit :-
https://brainly.com/question/16359096
#SPJ4
TRUE OR FALSE a trainer who is unsure of the ability levels in a group of trainees may need to administer a short pretest to determine their baseline ability levels.
In order to establish the baseline ability levels of a group of trainees, a trainer who is unaware of their skill levels may need to administer a brief pretest.
What are basic abilities?Basic abilities include things like basic computer literacy, which is increasingly a minimal requirement for even low-paying employment, as well as communication, problem-solving, detail-orientation, and creativity.
What's the baseline evaluation?The results of baseline assessments are used by schools to better understand the needs of their students, gauge each student's potential and aptitude for learning, and assess the influence they have on pupils as they advance through the educational system.
To know more about baseline skills visit:
https://brainly.com/question/29574918
#SPJ4
Worth 3 Points 0 You are given a class named Clock that has three instance variables: One of type int called hours, another of type boolean called isTicking, and the last one of type int called diff. Write a constructor for the class Clock that takes three parameters-an int, a boolean, and another int. The constructor should set the instance variables to the values provided. 1- public ClockOt nt hours, diff; boolean isTicking; 4 66 characters 5000 maximum Previous Submissions Clear x Code Analysis: Logic Error(s) Remarks and Hints Your constructor seems to have the wrong number of parameters. To create an Integer object you would have to use the new keyword. You almost certainly should be using:
A constructor is a specific function that is used to initialize objects in Java. The constructor is called whenever a class object is created.
What is the name of the constructor for the clock class?
general Clock (int hours, boolean isTicking, int diff) this. hours equal hours. isTicking is equal to this. new Integer (diff) = diff.
What is the constructor for the distinct types of int value hours, boolean value isTicking, and integer value diff?
This.hours = hours; This.isTicking = isTicking;
This.diff = new Integer (diff); public class Clock; Private int hours; Private boolean isTicking; Private Integer diff; Public Clock (int hours; boolean isTicking; int diff);
This.hours = hours; This.isTicking = isTicking; This.diff = diff; public Clock (int hours, boolean isTicking, int diff);
To know more about Constructors visit:
https://brainly.com/question/13853177
#SPJ4
Translate each of the following English statements into logical expressions. The domain of discourse is the set of all real numbers. (a) The reciprocal of every positive number less than one is greater than one. (b) There is no smallest number. (c) Every number other than 0 has a multiplicative inverse.
The correct answer is (A) Every positive number less than one has a reciprocal that is bigger than one.
Every positive number less than one has a counterpart that is bigger than one. If p is a positive number, then 1/p is p's reciprocal. Its reciprocal is 1 if the number is 1. However, if it is higher than 1, its reciprocal is lower than 1. Keep in mind that a fraction's product with its reciprocal is always 1. Consider the denominator of a whole number to be 1, in this case: 1/5 is the reciprocal of 5. When multiplying two numbers, the signs of the two numbers must match for the result to be positive. The sign of reciprocals must be the same. Keep the same sign while inverting the fraction to determine the reciprocal.
To learn more about reciprocal click the link below:
brainly.com/question/18634761
#SPJ4
How do you find the mechanical advantage of a screw?
The mechanical benefit of utilising a screw is that it distributes the force across a greater area, enabling big loads to be overcome with less force.
In other words, if you can twist a screwdriver with 1N of force, you can create 4N of force.
Step 1 is to measure the screw head's circumference.
Step 2: Calculate the thread pitch to determine the linear distance the screw would travel if it were twisted just once.
Step 3: To determine the mechanical advantage, divide the screw head's circumference by its pitch.
Screw: A screw is a straightforward device that consists of a cylindrical post that has a ridge wrapped around it in a helix pattern. The screw travels into the target material as far as the space between the threads after being spun once.
Learn more about Screw here:
https://brainly.com/question/15229241
#SPJ4
A biomedical engineer poked some sensors into a single neuron (nerve cell) in a giant squid to
measure its electrical activity. The voltage signals coming out of the neuron are graphed below.
a) What is the approximate frequency of this signal in this time window? Show your
calculations.
b) How would the graph look different if the frequency was increased? Decreased?
They found that a squid has 500 million neurons. This number is higher than that of rats (200 million) and is more similar to what a dog's brain contains. The results of their study now appear in the journal Science.
What is neuron?
Neurons (also called neurones or nerve cells) are the fundamental units of the brain and nervous system, the cells responsible for receiving sensory input from the external world, for sending motor commands to our muscles, and for transforming and relaying the electrical signals at every step in between.Neurons are divided into four major types: unipolar, bipolar, multipolar, and pseudounipolar. Unipolar neurons have only one structure extending from the soma; bipolar neurons have one axon and one dendrite extending from the soma.Betz cells (also known as pyramidal cells of Betz) are giant pyramidal cells (neurons) located within the fifth layer of the grey matter in the primary motor cortex.To learn more about cell refers to:
https://brainly.com/question/17745638
#SPJ1
consider the following maze for the robot. write the code that will get the robot to its final position and direction. you should not repeat any code; use loops and functions instead.
An entity that repeats a series of embedded commands is said to be in a loop.
What do robotics loops do?Inform students: An entity that repeats a series of embedded commands is said to be in a loop. This is helpful if you want to instruct a robot to repeat a task repeatedly in an effective manner.Robots of the first generation are remote-controlled, those of the second generation are autonomous, such as cleaning robots, those of the third generation fall under the category of networks, while teleoperated and autonomous robots are two subclasses of networked robots, and robots of the fourth generation are starship delivery systems.REPEAT UNTIL (NOT CAN_MOVE(right))
{
IF (CAN_MOVE(forward))
{
MOVE_FORWARD()
}
IF (NOT CAN_MOVE(forward))
ROTATE_RIGHT()
MOVE_FORWARD()
}
}
To learn more about loops refer to:
https://brainly.com/question/26568485
#SPJ4
a structural steel bar with 4.0 in x 0.875 in. rectangular cross section is subjected to an axial load of 45 kips. determine the maximum normal and shear stresses in the bar.
The maximum normal stress in the bar is 29.93 ksi and the maximum shear stress in the bar is 7.48 ksi.
To determine the maximum normal stress in the bar, we can use the formula:
σ_x = P/A
Where P is the axial load, A is the cross-sectional area of the bar, and σ_x is the normal stress in the bar.
A = bh
A = 40.875 = 3.5 in^2
σ_x = P/A
σ_x = 45000/3.5 = 12,857.14 psi = 12.857 ksi
To determine the maximum shear stress in the bar, we can use the formula:
τ_max = V/(bh/2)
Where V is the maximum shear load, b is the width of the cross-section, h is the height of the cross-section and τ_max is the maximum shear stress in the bar.
V = P/2
V = 45000/2 = 22500
τ_max = V/(bh/2)
τ_max = 22500/(4*0.875/2) = 7.48 ksi
For more questions like Shear stress click the link below:
https://brainly.com/question/14946878
#SPJ4
2013 toyota venza forums i have a wiring harness that goes from inside to under the vehicle what do they go to
Toyota Venza 2013 Forums I have such a wiring network that covers some different sorts of electronic cables and runs from the inside to beneath the car.
What purpose does a wiring harness serve?A wire harness, sometimes referred to as a wiring, is an outer sheath created to shield particular electrical wire types from environment. The cables in wiring harnesses are generally shielded from the environment employing thermoplastic as well as thermoset materials.
What is a wiring harness for a vehicle?A wiring harness is a logical arrangement of wires, terminals, and connectors that runs all through the entire vehicle and transmits data and electrical power, effectively "connecting" a number of different components.
To know more about wiring harness visit:
https://brainly.com/question/28369617
#SPJ4
To help picture the electric field, we use what are called electric field lines.
An electric field lines is a line that always points along the direction of the electric field (i.e. downhill in the pictures we have been making).
They begin on positive charges and end on negative charges.
Two electric field lines cannot cross; at best they can meet on a charge.
The number of lines in a region is proportional to the magnitude of the E-field. (You should see more in the steep regions on the pictures we have been making).
The electric field lines are normal to (at right angles to) the equipotential surfaces. (This makes sense because electric field lines are along the direction of greatest change in the potential; while along the equipotential surfaces the potential doesn't change.)
Using the rules above, draw several (not just a few) electric field lines on all of your Wireframe Contour plots. Make sure your lines respect all of the above rules.
Idenify on these plots (or a copy thereof) where the electric potential is zero and where the elctric field is zero.
Electric field lines always point toward a negative point and away from a positive charge. In actuality, positive charges are where electric fields begin and negative charges are where they end.
The ability to see the electric field is made possible by electric field lines. Electric field lines feature arrows indicating the electric field's direction since the electric field is a vector. We demonstrate the electric field lines of a single point charge as well as a positive and negative charge as two instances.An electric field line is often a curve that has the tangent of each point pointing in the direction of that point's net field. To designate the direction of the electric field from the two potential directions provided by a tangent to the curve, an arrow on the curve is plainly required.
To learn more about electric fields click the link below:
brainly.com/question/15800304
#SPJ4
In this lab, you'll practice creating classes and objects, using ArrayList objects, and working
with interacting objects (with some nice visuals). Even better, you'll be working with circles,
widely considered to be the roundest of all two-dimensional shapes.
1. Import the starter code to begin. Instructions (if needed), for your IDE of choice:
a. Jgrasp:
i. Download the starter code folder from the website (Download -> Direct download).
ii. Extract (unzip) the downloaded folder (right-click -> Extract all).
iii. Copy the entire (unzipped) folder to your H: drive; rename it in the usual fashion.
b. Eclipse:
i. In Eclipse, create a new Java project named in the usual fashion.
ii. Download the starter code folder from the website (Download -> Direct download).
iii. Extract (unzip) the downloaded folder (right-click -> Extract all).
iv. Drag and drop the unzipped materials as follows:
1. Drag the source (*.java) files into the "src" folder.
2. See here for help (don't worry about text files): youtu.be/LOSICIeP6Ko
2. Create a class Circle.java which is a simple abstraction of an on-screen circle (image). A Circle
should (initially) have the following:
int x and int y The center point of the circle's on-screen location. These values represent
the circle's (initial) location on screen.
int radius The radius of the circle.
Color color The color of the circle. Color is a class that is built into Java, a software
abstraction of color. You can create a new color using Color's
three-parameter constructor (e.g. new Color(50, 100, 150)), where
each integer is a value 0-255 (corresponding to red, green, and blue
components, respectively). There are also pre-built colors in the Color class
that you can use, e.g. Color.RED or Color.BLACK. Import:
java.awt.Color.
3. Write Circle's 4-parameter constructor. Give the parameter variables real good names.
4. A Circle is responsible for drawing itself. Write a void draw() method that displays the circle on
screen using the StdDraw.java graphics library (included in starter code). Use the following:
StdDraw.setPenColor(color); //set the current color of the drawing window
StdDraw.filledCircle(x, y, radius); //draw a filled circle at , diam of radius*2
The answer provided below has been developed in a clear step by step manner.In this lab, you'll practice creating classes and object, using ArrayList objects, and working with interacting objects.
sorry\sv You will experience building classes and objects in this lab as well as utilising ArrayList objects and interacting with them (with some nice visuals). The fact that you'll be dealing with circles, which are regarded as the roundest two-dimensional forms, is even better. Start by importing the startup code. Instructions for your preferred IDE (if necessary): JGrasp: i. Go to the website and download the beginning code folder (Download -> Direct download). ii. Right-click the downloaded folder and select "Extract all" to extract (unzip) it. iii. Copy the entire (unzipped) folder to your H: disc, then rename it as usual. i. Create a new Java project in Eclipse with the usual name. ii. Use the website's Download -> Direct download option to download the beginning code folder. iii. Extract (unzip) the downloaded folder by selecting Extract All from the context menu. iv. Drag and drop the unzipped files like in the example below: 1. Move the "src" folder into which the source (*.java) files are located. 2. Don't worry about text files; see this page for assistance: youtu.be/LOSICIeP6Ko 2. Create the class Circle.java, a straightforward abstraction of a circle on the screen (image). The following are starting requirements for a circle: Integers x and y The position of the circle's centre on the screen. These numbers show where the circle first appeared on the screen.
Learn more about Object here:
https://brainly.com/question/29493144
#SPJ4
Use Kruskal's Algorithm to find a) a minimum spanning tree and b) the cost of the minimum spanning tree for the following graph.
FULL SOLUTION IN THE IMAGES..
To know more about spanning visit:
https://brainly.com/question/16245954
#SPJ4
T/F : When tubing is cut with a tubing cutter, a burr is produced in the process. This slight decrease in the inside diameter of the tube can adversely affect the operation of the system.
The process of cutting tube with a tubing cutter results in the creation of a burr. The system's functionality may be negatively impacted by this tiny reduction in the tube's inner diameter. "True" is the appropriate response.
What are the different kinds of operations systems?A group of programmed known as an operating system allow a user to control and communicate with a computer. Windows, Mac OS, FreeBSD, and other operating systems are examples of operating systems. Operating systems come in a variety of forms.
How should a general tube cutter be used?Simply snap it onto the tube, shut the gate, and then turn. There are no knobs to turn; as you crank the Auto-Cut, the cutter blade automatically tightens. The cutter wheel has a spring loaded mechanism that
To know more about operation of the system visit:
https://brainly.com/question/24760752
#SPJ4
a circular nylon pipe supports a downward load pa 510kn, which is uniformly distributed around a cap plate at the top of the lower pipe. a second load pb 5 20 kn is applied upward at the top. the inner and outer diameters of the upper and lowerpartsofthepipeared1 550 mm,d2 560 mm, d3 5 55 mm, and d4 5 65 mm, respectively. the bot- tom pipe has length 400 mm and the upper pipe has length 300 mm. (a) calculate the axial normal stress in each pipe segment. (b) calculate the strain in each pipe segment if the elongation of the upper pipe is 3.29 mm and the elongation of the bottom part is 1.25 mm.
Elongation the lengthening of each pipe segment if the upper pipe is 3.29 mm long and the lower pipe is 1.25 mm long.
Elongation at Break is expressed as a percentage (% of elongation vs. original size) at the time of break. The term "strain to failure" also refers to the greatest elongation, or emax, at break. Elastomers and film/packaging polyolefins frequently have ultimate elongation values of several hundred percent. The change in length is divided by the initial length and expressed in micrometres per metre (m/m) to determine the elongation of a material. When the yield point is achieved, the elongation of many materials is proportional to the applied force. Tensile elongation at yield is another name for elongation at yield.
To learn more about Elongation click the link below:
brainly.com/question/852985
#SPJ4
Write a program that will display the top 3 items of your life bucket list (ex. life ambitions). Save the class as LifeBucketList.java. The output should have one line for each item and look something like this: Ride a rocket to space. See all 50 states in the USA. Travel to Fiji and get an ice cream. Also ensure that the following requirements are met: 1) Java file is named correctly. 2) Name, date and assignment information is included at the top of your Java code file as a comment. 3) Java code is properly indented and readable. 4) Code comments are present within each major section of code. 5) Use 3 separate println() statements within your program to achieve the required output.
A language for object-oriented programming is Java. The classes and objects in Java, together with their characteristics and methods
What is Java with example?
A language for object-oriented programming is Java. The classes and objects in Java, together with their characteristics and methods, are the foundation of everything. For instance, an automobile is an item in the actual world. The automobile contains characteristics like weight and colour, as well as functions like drive and brake.
// Substitute appropriate type.
ArrayList<...> a = new ArrayList<...>();
// Add elements to list.
// Generate an iterator. Start just after the last element.
ListIterator li = a.listIterator(a.size());
// Iterate in reverse.
while(li.hasPrevious()) {
System.out.println(li.previous());
}
To learn more about Java refer to:
https://brainly.com/question/26789430
#SPJ4
A 3 MW wind turbine was installed in an on-land location where the capacity factor was measured to be 22 percent. YOUR TURN 1. How much electricity will this wind turbine generate in a year? 2. How much revenue would a utility receive if they were paid $0.05/kwh for this electricity?
An average onshore wind turbine with a capacity of 2.5–3 MW can produce more than 6 million kWh in a year – enough to supply 1,500 average EU households with electricity.
Define Electricity?
Electricity is the flow of electrical power or charge. It is a secondary energy source which means that we get it from the conversion of other sources of energy, like coal, natural gas, oil, nuclear power and other natural sources, which are called primary sources.
The flow of charges in a conductor is defined as electricity. Charges are transferred from one end of the terminal to the other. It usually progresses from a positive to a negative terminal. The electrons travel freely within the body since the nucleus holds them loosely.The outer shells can hold even more. Some atoms with many protons can have as many as seven shells with electrons in them. The electrons in the shells closest to the nucleus have a strong force of attraction to the protons.To learn more about electricity refers to:
https://brainly.com/question/16554209
#SPJ4
Over 6 million kWh can be produced annually by an onshore wind turbine with a capacity of 2.5–3 MW, which is sufficient to power 1,500 typical EU households.
What is electricity?
The movement of electrical power or charge is called electricity. It is a secondary energy source, which means that it comes from the conversion of primary energy sources like coal, natural gas, oil, nuclear power, and others.
Electricity is the flow of charges in a conductor. The terminal moves charges from one end to the other. In most cases, it moves from a positive terminal to a negative terminal. Because the nucleus holds the electrons loosely, they can move around the body freely.
Even more can fit inside the outer shells. There may be as many as seven electron-filled shells in some atoms with many protons. Protons are strongly attracted to the electrons in the shells closest to the nucleus.
Learn more about electricity:
brainly.com/question/24786034
#SPJ4
If the load draws a current of 2727 A leading, with a phase angle of 30°, from a generator, which of the following statement is true? A. Since the current is leading the generator, both the real and reactive power is flowing from the load to the generator B. None of the other choices are correct C. Since the current is leading the generator voltage, both the real and reactive power is flowing from the generator to the load. D. The real power is flowing from generator to the load and the reactive power is flowing from the load to the generator E. The reactive power is flowing from generator to the load and the real power is flowing from the load to the generator
the load's impedance Z, its phase angle, and its magnitude. The instantaneous voltage, current, and temperature plots are created using the following
What is a generator?An electrical device known as a generator converts magnetic or mechanical energy into electrical energy. A stream, water, gas turbine, water turbine, etc. can all provide this mechanical energy. Direct current (DC) or alternating current (AC) can both be produced by the generator (DC).
Any device that transforms mechanical energy into electricity for distribution to residential, commercial, and industrial customers over power lines is known as an electric generator, also known as a dynamo. Additionally, generators provide the electrical power needed by vehicles like cars, planes, ships, and trains.
By transforming mechanical energy into electrical energy, an electric generator produces electricity.
To learn more about generator refers to:
brainly.com/question/12950635
#SPJ4
Determine the force in each member of the truss and state if the members are in tension or compression. Set P1 2 kN and P2 1.5 kN. Hint: Use the method of joints for analysis. == B 30° 30° ° с D 3 m 3 m P1
What follows if the node is subjected to the forces Tension is present when the force is moving away from the node. It is a compression force if the force is moving in the direction of the node.
Which of the truss's members are under tension or compression based on the force in each one of them?The method of joints involves calculating the force acting on each truss member while simultaneously including all forces acting at the joints in the equilibrium equation.
The secret to figuring out whether a diagonal or vertical member is in tension or compression is to see if they follow the same curve that a hanging chain would between the two end points.
The method of joints is a technique for figuring out the forces that are unknown to the members of a truss. The technique is usually the quickest and simplest way to solve for all the unknown forces in a truss structure because it centres on the joints or connection points between the members.
To learn more about force refers to:
brainly.com/question/388851
#SPJ4
