The work done on the truck over this distance is - 8089390.432J
What is the work done?Mass(m) = 13000 kg,Initial velocity = 127 km/hr
= 635/18 m/s, and
Distance(x) = 13 m to stop
Final velocity = 0 m/s
Work done = Final Kinetic Energy(KE) - Initial Kinetic Energy(KE)We know, KE = [tex]\frac{1}{2} mv^{2}[/tex]
Work done = 1/2 * 13000 * 0 - 1/2 * 13000 * [tex](\frac{635}{18}) ^{2}[/tex]
= 0 - 6500* 1244.521
= - 8089390.432J
The amount of energy that an external force transfers to an object when it moves it over a specific distance is known as the amount of work.The quantity of energy ,that is transmitted to an object via work is known as the work done on the object.Work often has joules as its unit of measurement since it is defined as an amount of transferred energy.To learn more about velocity, refer:
https://brainly.com/question/24445340
#SPJ1
How are the pressure difference created in nature?
Pressure differences in nature can be created by a variety of mechanisms. the mechanisms are Temperature differences,.Altitude differences, Density differences.
Temperature differences: Warm air is less dense than cool air, which creates a pressure difference between the two. This can lead to the formation of atmospheric circulations such as winds and storms.
Altitude differences: At higher elevations, the air is less dense than at lower elevations, which creates a pressure difference. This is why the air pressure decreases as you go up in altitude.
Density differences: When a fluid is flowing, areas of higher density will have a higher pressure than areas of lower density. This can lead to the formation of currents and eddies in water and air.
learn more about pressure here:
https://brainly.com/question/28215821
Answer:
The pressure difference is created in nature by the heat of the sun.
Explanation:
When it falls on the earth's surface, the surface of the earth gets heated and the air above it also gets warm and becomes lightweight, and moves upward. Thus, the pressure difference is created.
What is the principle of lever short answer?.
Principle of Lever practical experience has shown that when two equal forces in different directions,
What is the lever's underlying principle?Lever Practical experience has shown that when two equivalent forces acting in different directions, — in other words, counterclockwise and clockwise, were applied to a homogeneous lever at equal spacing from the pivot, they balance each other out and bring the lever to equilibrium.
What does a kid-friendly definition of a lever simple look like?
Image for What is the concise explanation of the lever principle, Levers are tools that increase force, to put it simply. We refer to them as "simple machines" since they.
to know more about Lever visit:
https://brainly.com/question/30284632
#SPJ4
You throw a red ball straight up with a speed of 7m / s When it reaches the very top of its path what is its acceleration?
When an object is thrown straight up, it initially accelerates upward as it gains speed. Once it reaches the very top of its path, it stops accelerating and begins to decelerate due to gravity, until it reaches its maximum height and starts to fall back down.
At the very top of its path, the acceleration of the red ball is zero, because it is no longer gaining speed, it has reached its maximum height and is starting to fall back down.
The acceleration of the red ball at the very top of its path is zero m/s^2.
It's important to note that the initial velocity is 7m/s and the acceleration is the change of velocity over time, which is equal to zero because the velocity is the same and hasn't changed, the ball is at the highest point and it is not moving anymore.
What is the SI unit of work Mcq?.
The SI unit of work is the joule (J).
Work is the amount of energy required to move an object through a distance, and it is calculated by multiplying the force applied to an object by the distance over which the force is applied. The joule is the derived unit of energy and work in the International System of Units (SI). It is defined as the amount of energy expended in applying a force of one newton through a distance of one meter. In other words, it is the energy required to move an object with a mass of one kilogram through a distance of one meter, while applying a force of one newton. Work can also be described as the energy transferred to or from an object by the application of a force. The Joule is also used for heat, power and many other units.
To know more about work click here:
https://brainly.com/question/14540101#
#SPJ4
What is the law of conservation of linear momentum and its formula?.
The linear momentum formula is p = mv. The overall quantity of momentum never changes, and this phenomenon is known as momentum conservation.
What is the law of linear momentum conservation?If the net external force acting on a system of bodies is zero, the momentum of the system remains constant, according to the conservation of linear momentum. We must remember that the momentum of the system, not the individual particles, is preserved.
For example, consider two bodies of mass M and m, one at rest and the other travelling with certain velocity towards it. If they collide and move together afterward.
Learn more about linear momentum
https://brainly.com/question/4126751
#SPJ4
We now define a quantity_______, called the total mechanical energy of our system
We now define a quantity the sum of the potential energy and the kinetic energy is called the total mechanical energy of our system.
What is Total Mechanical energy?
The energy a body has as a result of movement or position is known as mechanical energy. The energy that is released by falling from a particular position is a good example. As the literal driving force of the world around us, whether it be natural or man-made, mechanical energy is one of the fundamentals studied in mechanical engineering. In joules, mechanical energy is measured.
The sum of a body's potential energy and kinetic energy is referred to as total mechanical energy. The total of the two forms of mechanical energy in a single occurrence is constant. The ball's kinetic and potential energies change quickly as it rises and falls, but their combined total remains constant.E = K + U.
The ball starts to lose kinetic energy as it rises. The conversion of energy to potential energy, or heat, which is essentially a chaotic mixture of kinetic and potential energy, is the only way energy can actually be lost. The ball develops momentum as it falls back down, increasing its kinetic energy.This kinetic energy does not just appear. Instead, the ball's potential energy—which it accumulated while rising—is now being converted into kinetic energy.To know more about Total Mechanical energy ,refer to:
https://brainly.com/question/15277710
#SPJ1
help me please!! in a stankey diagram, what does the thickness of the lines represent?
Answer: The thickness of the vertical flow lines indicates the relative quantity.
The thickness of the vertical flow lines indicates the relative quantity.
What is vertical flow?A vertical flow constructed wetland is a planted filter bed that is drained at the bottom. Wastewater is poured or dosed onto the surface from above using a mechanical dosing system. The water flows vertically down through the filter matrix to the bottom of the basin where it is collected in a drainage pipe.Vertical flow immunoassays rely on the same basic principles as the more common lateral flow immunoassay format with some modifications. The most apparent difference between the two methods being the vertical and lateral flow of fluid. However, vertical flow technology has several advantages over traditional lateral flow assays with the most significant being the reduced assay time (<5 minutes), table I.To learn more about vertical flow refer to:
https://brainly.com/question/24061056
#SPJ1
What is the formula and unit of work?.
The formula of work is given as force multiplied by distance. The unit of work is said to be joule.
A force is a quantity which is a vector because it has both a magnitude and a direction. According to Newton's laws, the force acting on an item is what causes it to move or cease moving.
Force multiplied by distance equals work. Work is a form of energy that is expended as an object moves along certain distance. However, note that this particular formulation:
W = F d
The above equation works only if force is constant and if the movement is entirely linear on a flat surface. General formula for determining work can be done through calculus as:
W = ∫ F ds
where the distance becomes differential from d to ds, and allows us to evaluate the work done even for non-linear paths or on paths that are inclined at angles above the horizontal plane.
To know more about work:
https://brainly.com/question/8693401
#SPJ4
A hot-air balloon takes off from the ground traveling vertically with a constant upward acceleration of magnitude g/4. After a time interval Δt, a crew member releases a ballast sandbag from the basket attached to the balloon. How many seconds does it take the sandbag to reach the ground?
The distance traveled (height) following a drop until it touches the ground is calculated using the equation s = u*t + 1/2*a*t2. The height from which the sandbag was dropped is given by plugging in the u, t, and a values mentioned above as well as s = 110 m.
What are Newton's first, second, and third laws of motion?
According to the first law, a force must be applied to an object before it may affect its motion. According to the second law, an object experiences a force equal to its mass times its acceleration. According to the third law, when two things interact, they exert forces on one another that are both equal in strength and directed in the opposite direction.
What is the definition of equation of motion class 9?
A set of equations can be used to construct a relationship between the body's velocity, acceleration, and the distance it travels in a given amount of time when the body is moving in a straight line with uniform acceleration.
To know more about equation visit:
brainly.com/question/13514745
#SPJ4
Liz is shipping a package to her friend. The maximum weight of a medium flat-rate box is 20 pounds, including the box which weighs 38 3 8 pound. What is the possible weight in pounds, w, of the contents that liz will ship to her friend if she must use a medium flat-rate box? complete the sentence with the correct inequality and solution.
The correct inequality solution is: w ≤ 19.62
What is weight?Weight is the gravitational force that pulls on an object when a larger second object, such the Earth or Moon, is present. It represents how much gravity is pulling on a body. Given that weight is a force, its SI unit is likewise a force; hence, the SI unit of weight is the Newton (N).
On Earth compared to the Moon, an object's weight would vary due to the effects of gravity. This is how the weight formula is explained: Mass times gravitational pull equals weight. This may be expressed as w = mg.
Let, the possible weight of the medium flat-rate box = w pounds.
It is given that there is a box weighing 0.38 pounds.
Plus, the maximum weight of the package is 20 pounds.
So, we get,
The inequality representing the situation is,
Weight of medium box + 0.375 pounds ≤ Maximum weight of the package
i.e. w + 0.38 ≤ 20
or, w ≤ 19.62
To know more about inequality refer to:
https://brainly.com/question/29381954
#SPJ4
A pacehip traveling in pace at a contant velocity of 800m-1 launche a probe tomand a ditant
planet. If the probe i launched with a velocity relative to the pacehip. Of
600 m-1 in a direction at right angle to
the
Flight path of the pacehip,Calculate the reultant velocity of the probe
The overall equation in this case is v (final) - at + v (initial), where v denotes velocity, a denotes acceleration, and t is time.
How do you calculate resultant velocity?The total of an object's individual vector velocities is known as the resultant velocity. The scalar product of an object's mass and acceleration vector equals the total of its vector forces, which are measured in terms of a force vector.R = A + B. Equation 2 To create the resultant vector, opposing vectors are subtracted from one another. R is the resultant vector in this case, and the vector B is directed in the opposite direction to the vector A.By dividing the entire distance travelled by the time it took the object to go a certain distance, you may calculate the object's initial velocity. V, d, and t are the three variables that make up the equation V = d/t.To learn more about velocity refer to:
https://brainly.com/question/20432894
#SPJ4
What is Newton's 2nd law of motion apply it in an example?.
According to Newton's second law of motion, the rate of change of an object is directed proportional to force applied to it and takes place in the direction in which the force acts. Mathematically, it is written as, F = m a.
You may have observed that a fielder frequently pulls his hand backward while capturing a faster-moving cricket ball. This is so that the fielder can extend the period of time during which the ball's high velocity lowers to zero.
As a result, the ball's acceleration slows down, which lessens the impact of catching the ball's increased speed and prevents the fielder's hand from being injured.
To know more about Newton's laws:
https://brainly.com/question/21095431
#SPJ4
What is Newton's 3rd law commonly called?.
Newton's third law is also known as the law of complementary effects and the law of action-response.
Newton's third law, the law of interaction and the law of action and reaction, states that all actions have equal and opposite reactions.
This shows that when one object exerts a force on another, the mirror image exerts an equal and opposite reaction on the first object. “For every action, there is an equal and opposite reaction” is a popular saying.
This principle can be observed in a variety of real-world situations, such as when someone pushes a wall and the wall is pushed back with the same and opposite force.
To learn more about Newton's 3rd law at
https://brainly.com/question/14967902?referrer=searchResults
#SPJ4
Energy Representations 3: Power and Efficiency:Question 2
This Sankey diagram shows the energy transformations
in a mixer used to stir ingredients together. If the
percentage of non-useful energy produced by the mixer
is 30%, what is the energy efficiency of the mixer?
Select one:
10%.
70%.
100%.
30%.
Electric energy
Sound
Thermal energy
energy
Kinetic energ
The energy efficiency of the mixer is 70%.
The Sankey diagram shows the amount of energy absorbed, the amount of useful energy, and the amount of non-useful energy.
Input energy = output energyInput energy = useful energy + non-useful energyInput energy (I) = useful energy (U) + waste energy (W)The efficiency of a device
η = (U/I) × 100%
Input energy is always 100%I = U + W
100% = U + 30%
U = 100% - 30%
U = 70%
The efficiency of the mixer
η = (U/I) × 100%
η = (70%/100%) × 100%
η = (7/10) × 100%
η = 70%
Learn more about Sankey diagram here: https://brainly.com/question/13697173
#SPJ1
a form of energy conversion that captures heat energy from within earth
Geothermal energy is a method of energy conversion that utilizes heat energy from inside the Earth to generate electricity and other purposes such as space heating, cooking, and bathing.
Examples of surface phenomena that are created by heat from the Earth's core include lava flows, geysers, fumaroles, hot springs, and mud pots. The heat is mostly produced by friction at the borders of continental plates as well as the radioactive decay of potassium, thorium, and uranium in the Earth's crust and mantle. The resultant low-grade heat flow has a global yearly average of 50 to 70 milliwatts (mW) per square meter. In contrast, the surface of the Earth receives 342 watts per square meter of solar radiation per year (see solar energy). Geothermal heat energy may be gathered and used for human purposes everywhere on the surface of the Earth. There will be 4.5 106 petajoules On the surface, energy can be gathered and utilized.
Learn more about Energy here:
https://brainly.com/question/1932868
#SPJ4
What is linear momentum and its SI unit class 9?.
A body's linear momentum is defined as the product of its mass and velocity. Kgms-1 is the SI unit of linear momentum.
What exactly is momentum?Linear momentum is defined as the product of a system's mass and velocity. An equation is used to express linear momentum p. p = mv. According to the equation, momentum is proportional to mass (m) and velocity (v) (v). A body's linear momentum is defined as the product of its mass and velocity. p = mv. Linear momentum is measured in kilograms per second. Linear momentum is defined as the product of an object's mass (m) and velocity (v) (v). It is more harder to stop an item that has more momentum. The linear momentum formula is p = mv.
Here,
The linear momentum of a body is defined as the product of its mass and velocity. Kgms-1 is the SI unit for linear momentum.
To know more about momentum,
https://brainly.com/question/22418297
#SPJ4
According to mendel's law of independent assortment, which punnett square correctly lists the gametes for these individuals?.
According to Mendel's law of independent assortment, which punnett square correctly lists the gametes for these individuals
What is Mendel's law of independent?The alleles of two (or more) distinct genes are chosen onto gametes independently from one another, according to Mendel's law of independent assortment. To put it another way, the allele that a gamete receives for one gene has no effect on the allele that it receives for another gene. When reproductive cells mature, various genes autonomously segregate from one another, according to the Principle of Independent Assortment. When Gregor Mendel initially studied genetics in pea plants in 1865, he discovered the independent assortment of genes and the qualities that go along with them.
An illustration of the law of independent assortment is: There are crossed two-hybrid rabbits. Having the genotype BbGg, both rabbits are. Each rabbit produced gametes before breeding. As a result, the copies of each chromosome are assigned to various individuals, and the alleles are separated gametes.
For the two genotypes given - BBTt and Bbtt
The gametes formed from BBTt are: BT, Bt, BT and BtThe gametes formed from Bbtt are: Bt, Bt, bt, and btTo know more about Mendel's law of independent refer to:
https://brainly.com/question/14972800
#SPJ4
The complete question is as follows:
Where does the roller coaster have the most potential energy and least kinetic energy?.
At the top of the hill, the roller coaster has the most potential energy and least kinetic energy.
The roller coaster has a maximum amount of potential energy and no kinetic energy at the top. As the roller coaster begins moving down to the bottom, its potential energy starts decreasing whereas the kinetic energy starts increasing. And at the bottom, kinetic energy is highest while there is no potential energy.
In other words, the maximum potential energy generated is when the roller coaster is at the top of the hill. When it begins to go down, the potential energy converts to kinetic energy. So when the roller coaster reaches the top of the hill, it attains the most potential energy and least kinetic energy.
You can learn more about potential energy and kinetic energy at
brainly.com/question/18963960
#SPJ4
help!! Which of the following statements accurately describes both the scientific method and the technological design process.
a.Both use the scientific method to achieve the best result.
b.Both are directly meant to make human lives easier.
c.Both are concerned with improving humanity's amount of knowledge.
d.Both are a process that is repeated many times over.
Answer:
b.Both are directly meant to make human lives easier.
c.Both are concerned with improving humanity's amount of knowledge.
What is the main advantage of 5G when compared to 4G?.
Overall, 5G has various advantages over 4G, including faster speeds, lower latency, capacity for more connected devices, less interference, and improved efficiency, thanks to the new technology, spectrum.
The eagerly awaited fifth-generation mobile telecommunications technology, also known as 5G, has been hailed as a paradigm shift in mobile networking, promising tenfold higher download rates, real-time data sharing, and increased network capacity.
5G has finally here, despite setbacks and delays that have plagued the rollout in both the US and several regions of Europe. With between 80 and 90% of the world's population, South Korea, the US, and China are pacing the field. Although Europe lags behind, Switzerland is an anomaly and has attained 90%.
Mobile network operators and technology vendors are as bullish as ever about the future of 5G, despite continued difficulties with the worldwide rollout. According to the 2021 Ericsson Mobility Report, by 2027, over half of all mobile subscriptions will be for 5G.
Learn more about 5G here:
https://brainly.com/question/29533919
#SPJ4
the mean of a dataset is 10 and the standard deviation is 2. what is the z-score of the data value 4
The z-score of the data value 4 is -3.
To calculate the z-score of a data value,
we use the formula z = (x - μ) / σ,
where
x is the data value,
μ is the mean of the dataset, and
σ is the standard deviation of the dataset.
In this case, the mean of the dataset is 10 and the standard deviation is 2. Therefore, when finding the z-score of the data value 4, we calculate (4 - 10) / 2 = -3.
Therefore, the z-score of the data value 4 is -3.
To learn more about standard deviation, click here:
https://brainly.com/question/23907081
#SPJ4
Why is a roller coaster a good example of potential and kinetic energy?.
A roller coaster is a good example of potential and kinetic energy because the roller coaster gains potential energy as it is pulled to the top of the hill. And as the roller coaster descends downward the potential energy is converted to kinetic energy.
Kinetic energy is the type of energy that is possessed by an object when it is in motion. While potential energy is the type of energy that is possessed by an object because of its state or position.
A roller coaster is an example that involves both kinetic and potential energy. When the roller coaster goes upward to the hill, it gains potential energy because of its changing state. And when the roller coaster is released from the chain and begins coming down the hill, kinetic energy is gained as a result of its motion toward the bottom.
You can learn more about potential energy and kinetic energy at
brainly.com/question/18963960
#SPJ4
The hydraulic fluid transmits the pressure, caused by piston A, equally to each of the four holding up the car supports. The pressure throughout the fluid is the same. A force of 1000 N on piston A is just enough to raise the car. (a) Using values from Fig. 3.1, find (i) the pressure caused by piston A on the fluid, pressure = [2]
To find the pressure caused by piston A on the fluid, we can use the formula:
Pressure = Force / Area
Given that the force exerted by piston A is 1000 N, and the area of each of the four pistons that hold up the car is 0.02 m^2, we can calculate the pressure as:
Pressure = 1000 N / (4 x 0.02 m^2)
Pressure = 25000 N/m^2
So the pressure caused by piston A on the fluid is 25000 N/m^2
What is the formula of torque of couple?.
The formula for Torque of couple is given as:
Moment (Torque)= F x d, where, F is the force in newtons and d is the perpendicular distance in meters.
Torque is defined as the moment of a force at about a turning point is the force multiplied by the perpendicular distance to the force from the turning point.
For Example- A 20N force acts at a perpendicular distance of 2m from the turning point then it torque will be equal to-
Torque of couple = F x d = 20 x 2 = 40 Nm
The moment of torque becomes zero when the forces acting on the body have the same line of action. When the forces are at right angles to the arm , the torque is maximum.
Learn more about Torque here:
https://brainly.com/question/25708791
#SPJ4
Many modern rifles uses bullets that have less mass and reach higher speeds than bullets of older rifles. This makes the rifle more accurate over longer distances. The momentum of an older bullet, fired from an old rifle, is 8,25 kg.m.a north.
What is the momentum of a new bullet which has 3/4 the mass of the old bullets and is 3/2 of the speed of the old rifle
0.5kg is the momentum of a new bullet. Guns are able to cause such significant damage because of the momentum they provide their bullets.
What is the bullet momentum?Guns are able to cause such significant damage because of the momentum they provide their bullets. An object's momentum is calculated by dividing its mass by its speed. An object's mass or speed can be increased to enhance its momentum and, thus, its capacity for destruction.Long range performance will be greatly reduced since a bullet with a bigger diameter will have significantly more drag than a bullet with a smaller diameter and the same mass.An object's momentum is calculated by dividing its mass by its speed. An object's mass or speed can be increased to enhance its momentum and, thus, its capacity for destruction.Explanation:
Object momentum: 3/4 divided by 3/2 = 0.75 / 1.5
= 0.5kg.
To learn more about bullet momentum refer to:
https://brainly.com/question/2400186
#SPJ1
Two tugboats pull a disabled supertanker. Each tug exerts a constant force of 2.10×10^6 N
, one at an angle 17.0 ∘
west of north, and the other at an angle 17.0 ∘
east of north, as they pull the tanker a distance 0.630 km
toward the north. What is the total work done by the two tugboats on the supertanker?
Express your answer in joules, to three significant figures.
To pull the tanker 0.630 km total work to be done is 1.871 × 10⁹ Joule.
What is force?The definition of force in physics is: The push or pull on a massed object changes its velocity.
An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.
Resultant force acting on the tugboat = √2 × 2.10 × 10⁶ N.
To pull the tanker 0.630 km, that is, 630 m, work done = force × displacement
= √2 × 2.10 × 10⁶ N × 630 m
= 1871004543.01 Joule.
= 1.871 × 10⁹ Joule.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ1
How much latency can you hear?.
The consequences of lag often don't become audible until they are 15 to 30 milliseconds (ms)
We are aware of this because recording studios monitor latency, and the permissible range is 10–12 ms. Higher latencies frequently cause musicians to lose focus during performances.
According to research, it needs a delay of 20 to 30 ms for our brains to distinguish one sound from another. Thus, latency up to 10ms is typically acceptable; we won't notice it. But if it goes beyond that, the artist will start to lose the musical sensibility, which will have an impact on his performance.
The device ecosystem has significantly improved as a result of these steps and a renewed focus on audio delay from device manufacturers.
To learn more about Latency:
https://brainly.com/question/30122968
#SPJ4
does energy play an important role in global warming?
pls answer quick - ill give u all my points
Answer:
Yes.
Globally, energy usage is by far the most significant source of greenhouse gas emissions from human activity. About two-thirds of worldwide greenhouse gas emissions are associated with the use of fossil fuels to provide energy for heating, electricity, transportation, and industry.
Hope this helped :)
A crane lift a pallet of brick to the top of a 80 m building, requiring 400 kJ of energy. What wa the ma of the pallet?
A kier, with a ma of 70 kg, loe 140 kJ of energy when kiing down the lope. What wa the height which the kier decended
The height which the kier descended can be calculated using the formula: h = E/M, where h is the height descended, E is the energy lost and M is the mass of the kier. In this case, the height would be 140 kJ/70 kg = 2 m.
What is the energy ?Energy is the capacity to do work; it is a measure of the amount of activity or effort that is expended in a given period of time. It can be found in many different forms, such as kinetic energy, potential energy, thermal energy, electrical energy, chemical energy, and nuclear energy. These forms of energy can be converted into one another and used to perform work.
The mass of the pallet can be calculated using the formula: M = E/h, where M is the mass of the pallet, E is the energy required to lift the pallet and h is the height of the building. In this case, the mass of the pallet would be 400 kJ/80 m = 5 kg.
The height which the kier descended can be calculated using the formula: h = E/M, where h is the height descended, E is the energy lost and M is the mass of the kier. In this case, the height would be 140 kJ/70 kg = 2 m.
To learn more about energy
https://brainly.com/question/2003548
#SPJ4
What is torque per unit moment of inertia?.
Torque τ per unit moment of inertia I is nothing but the angular acceleration α.
An object rotates at an acceleration is inversely proportional to its moment of inertia when a torque is applied to it. Torque is defined mathematically as: τ = I α, where I is the moment of inertia and α is the angular acceleration.
I is usually given by the formula, I = m r².
In rotating motion, torque is the same as force in linear motion. It is the main factor that maintains an object's rotation.
Torque and rotational inertia replace force and mass, respectively, in the angular application of Newton's Second Law. The relationship between angular acceleration and torque is true when an object's rotational inertia is constant.
To know more about torque:
https://brainly.com/question/15585759
#SPJ4
