A 27 kg chair initially at rest on a horizontal
floor requires a 173 N horizontal force to set
it in motion. Once the chair is in motion, a
148 N horizontal force keeps it moving at a
constant velocity.
The acceleration of gravity is 9.81 m/s.
a) What is the coefficient of static friction
between the chair and the floor?

Answer:

21

Explanation:

9+10=21

We have that for the Question "(a) what multiple of the maximum charge is on the capacitor and (b) what multiple of the maximum current is in the inductor"  

Answer:

From the question we are told

In an oscillating LC circuit, when 86.6% of the total energy is stored in the inductor's magnetic field

A) When 86.6\% energy is stored in inductor

[tex]\%[/tex]of energy stored in electric field = [tex]1 - 0.866 = 13.4\%[/tex]

[tex]\frac{V_E}{V} = \frac{\frac{q^2}{2c}}{\frac{Q^2}{2c}} = 0.134\\\\\frac{q}{Q} = \sqrt0.134\\\\\frac{q}{Q} = 0.366\\\\q = 0.366Q_{max[/tex]

B)

[tex]\frac{V_B}{V} = \frac{\frac{Li^2}{2}}{\frac{LI^2}{2}} = 0.866\\\\\frac{i}{I} = \sqrt0.866\\\\\frac{i}{I} = 0.931\\\\i = 0.931I_{max[/tex]

For more information on this visit

https://brainly.com/question/23379286

Answer:

destroy

Explanation:

cuz if anyhow throw rubbish, it will affect/destroy the world environment

Answer:

bathing regularly 2pollute 3 throwing waste in land water water pollution

100000 Pascal

Explanation:

pressure= force/area

Max pressure= force/min area

so f=5

min area= 5×10^-5

5÷5*10^-5 = 100000pascal

The heat released by the aluminum during the process is [tex]3.6 \times 10^6 \ J[/tex].

The given parameters:

The heat released by the aluminum during the process is calculated as follows;

[tex]Q = mc \Delta t \\\\Q = 1.5\times 900 \times (2700 - 23)\\\\Q = 3.6 \times 10^6 \ J[/tex]

Thus, the heat released by the aluminum during the process is [tex]3.6 \times 10^6 \ J[/tex].

Learn more about heat capacity here: https://brainly.com/question/21406849

Answer:

OK sure why not!!!!!!!!!!!!

Answer:

Dynamic exercises

Explanation:

Answer:

I think that the answer is 4.318 as a=f/p

Answer:

Fnet = 5 Newton

Explanation:

Fnet = 10 N - 5 N

Fnet = 5 N

Answer:

3h/4

Explanation:

At speed v/2 height will be 3/4 h

Equation that describes the motion of point , bodies , and system of bodies without considering the force that cause them to move is called equation of motion in kinematics

When block is at top of first ramp

u=0 ( block was at rest )

a = g ( acceleration due to gravity

using equation of motion                                                                                                                                                                                                                                                                    

2as = v^2 - u^2

2gh = v^2

Then the block continued and reached a speed of v1 = v/2 on second ramp

now , final velocity = v= v1 =[tex]\sqrt{2gh}[/tex] / 2

u= [tex]\sqrt{2gh\\}[/tex]

s= h1

using equation of motion , we get

2as = v^2 - u^2

2(-g)h1 =( [tex]\sqrt{2gh}[/tex]/2)^2 - [tex]\sqrt{2gh}[/tex]

2(-g)h1 = (g h - 4 g h) / 2

h1 = 3/4 h

At speed v/2 height will be 3/4 h

learn more about equation of motion in kinematics:

https://brainly.com/question/14355103?referrer=searchResults

#SPJ2

Answer:

do your work why you in class and you would know

Explanation:

Answer: False

Explanation:

It's received in elliptical cavities.

False. The statement is not entirely accurate. Condyloid joints are a type of synovial joint that allow movement in two planes, similar to an ellipsoid joint.

These joints are characterized by an oval-shaped projection of one bone fitting into an elliptical cavity of another bone. The term "condyle" does refer to a rounded projection or bump on a bone, but not all condyle bone markings create condyloid joints.

Condyloid joints are found in various parts of the body, such as the wrist (between the radius and carpal bones) and the knuckles (between the metacarpal bones and phalanges). They allow for movements such as flexion, extension, abduction, adduction, and circumduction.

It's important to note that the formation of a condyloid joint involves not only the presence of condyle bone markings but also the specific structural arrangement of the bones and the presence of articular cartilage, joint capsule, and synovial fluid. Therefore, while the term "condyle" is related to these joints, it does not accurately capture the complexity of their formation and function.

To learn more about Condyloid joints, here

https://brainly.com/question/30165924

#SPJ3

Answer:

Explanation:

Explanation:

Characteristics of Force:

Forces are due to an interaction of at least two objects. It may change the state of motion of an object. It may change the shape of an object. Forces applied on an object in the same direction add to one another and the resultant is in the same direction.

Answer:

I don't understand your language

This question involves the concepts of the induced emf, magnetic field, and angular frequency.

The maximum emf induced in the coil is "32.68 volts".

The following formula can be used to find out the induced emf in the coil.

[tex]E =N\omega AB\ Sin(\omega t)[/tex]

But, for maximum induced emf sin function should have a value of 1. Therefore,

[tex]E = N\omega AB[/tex]

where,

E = induced emf = ?

N = No. of turns in the coil = 310 turns

ω = angular frequency = 12.2 rad/s

A = Area of coil = (0.075 m)(0.18 m) = 0.0135 m²

B = magnetic field = 0.64 T

Therefore,

[tex]E=(310)(12.2\ rad/s)(0.0135\ m^2)(0.64\ T)[/tex]

E = 32.68 volts

Learn more about induced emf here:

https://brainly.com/question/18441805?referrer=searchResults

The total reactance of the inductor and the capacitor is 470.1 ohms.

The given parameters;

The inductive reactance of the coil is calculated as follows;

[tex]X_l = \omega L\\\\X_l = 2\pi f L\\\\X_l = 2\pi \times 60 \times 250 \times 10^{-3}\\\\X_l = 94.26 \ ohms[/tex]

The capacitive reactance of the capacitor is calculated as follows;

[tex]X_c = \frac{1}{\omega C} \\\\X_c = \frac{1}{2\pi f C} \\\\X_c = \frac{1}{2\pi \times 60 \times 4.7 \times 10^{-6}} \\\\X_c = 564.31 \ ohms[/tex]

The impedance of the circuit is calculated as follows;

[tex]Z = \sqrt{(X_c - X_l)^2} \\\\Z = X_c - X_l\\\\Z = 564.31 - 94.26\\\\Z = 470.1 \ ohms[/tex]

Thus, the total reactance of the inductor and the capacitor is 470.1 ohms.

Learn more here:https://brainly.com/question/10886711

Answer:

138

Explanation:

(since there's a blank next to "9x y j", I'm assuming the y of F(x, y) is 9x[tex]\sqrt{y}[/tex] j)

1) find the partial derivative of each:

[tex](6y^{\frac{3}{2} })i + (9x\sqrt{y} )j[/tex]  

 [tex]f_{x} =(6y^{\frac{3}{2} })_{x} = \int\limits{6y^{\frac{3}{2} }} \, dx = 6xy^{\frac{3}{2} } +c \\\\f_{y} = (9x\sqrt{y} )_{y} = \int\limits{9xy^{\frac{1}{2} } } \, dy = 9x(\frac{2}{3} )y^{\frac{3}{2} } +c = 6xy^{\frac{3}{2} } +c[/tex]

2) use partial integrals to make gradient of f:

take whatever you got from partial integral and add them together (if they repeat, just use it once)

[tex]F =[/tex] Vf (V = gradient of)

[tex]F(x, y) = 6xy^{\frac{3}{2} }[/tex]

3) Evaluate the integrals with given points:

Integral of F dotted with dr = F(point B) - F(point A) = F(3, 4) - F(1, 1)

[tex]F(point B) = 6(3)(4)^{\frac{3}{2} }\\F(Point A) = 6(1)(1)^{\frac{3}{2}}\\F(point B) - F(pointA) = 6(3)(4)^{\frac{3}{2} }-(6(1)(1)^{\frac{3}{2}})[/tex]

= 144 - 6 = 138 units of work

Work done by the force field F in moving an object from A to B = 138 J

Given data :

Force field F(x,y) = [tex]6y^{\frac{3}{2} }i + (9x\sqrt{y} ) j[/tex]  

Step 1 : determine the partial derivatives of the vector quantity

Fx = ∫ [tex]6y^{\frac{3}{2} }i = 6xy^{\frac{3}{2} } + c[/tex]

Fy = ∫ [tex](9x \sqrt{y})_{y} = 9x(\frac{2}{3})y^{\frac{3}{2} } + c[/tex]

Equating the partial derivatives :  

[tex]9x(\frac{2}{3})y^{\frac{3}{2} } + c[/tex]  = [tex]6xy^{\frac{3}{2} } + c[/tex]

therefore the gradient of F  i.e. F = vF  = F( x,y ) = [tex]6xy^{\frac{3}{2} }[/tex]

Next step : Determine the work done

Work done ( F.dr ) = [ F(point b ) = F( 3,4 ) ]  - [ F(point A) = F( 1,1 ) ]

F(3,4 ) = 6(3)(4)[tex]^{\frac{3}{2} }[/tex]  = 144

F( 1,1 )  = 6(1)(1)[tex]^{\frac{3}{2} }[/tex]    = 6

Therefore the work done by the force field = 144 - 6 = 138 J

Hence we can conclude that the work done by the force field F is = 138 J

Learn more about work done : https://brainly.com/question/21854305

Answer:

It should just be A

Explanation:

I dont see the difference between these 2 but ill choose A and update you

Answer:

A: racket, air

Explanation:

Answer:

Climate Change

Ito ang pagbabago sa normal na panahon sa isang lugar. Maaaring abnormal na pagbabago sa ulan na nattanggap ng isang lugar sa isang taon o ang abnormal na pagbabago sa init ng panahon.

Paano masusulusyunan ito?

Tanggalin sa pagkakasaksak ang mga gadgets kapag puno na

Huwag pumutol ng mga puno

Iwasan ang pagsakay sa transportasyon kung malapit lang ang pupuntahan

Explanation:

pa brainliest

Answer:

newtons per coulomb

Answer:

False.

Explanation:

A load of 20N is lifted through a height of 8m by a machine.If the effort of 80N moves a distance of 6m.Calculate the efficiency percentage of the machine

Explanation:

A load of 20N is lifted through a height of 8m by a machine.If the effort of 80N moves a distance of 6m.Calculate the efficiency percentage of the machine

Answer:



Join / Login

Join / LoginQuestion

Join / LoginQuestion

Join / LoginQuestionIn a lifting machine an effort of 500 N is to be moved by a distance of 20 m to raise a load of 10000 N by a distance of 0.8 m Determine the velocity ratio and mechanical advantage

Determine the velocity ratio and mechanical advantageA

Determine the velocity ratio and mechanical advantageA10 and 35

Determine the velocity ratio and mechanical advantageA10 and 35B

Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35

Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C

Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25

Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D

Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20

Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20Easy

Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in App

Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolution

Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolution

Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolutionVerified by Toppr

Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolutionVerified by TopprCorrect option is

Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolutionVerified by TopprCorrect option isD

Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolutionVerified by TopprCorrect option isD25 and 20

Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolutionVerified by TopprCorrect option isD25 and 20Distance moved by effort is 20m,that of load is 0.8m

Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolutionVerified by TopprCorrect option isD25 and 20Distance moved by effort is 20m,that of load is 0.8mVR=LdEd

Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolutionVerified by TopprCorrect option isD25 and 20Distance moved by effort is 20m,that of load is 0.8mVR=LdEdVR=0.820

Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolutionVerified by TopprCorrect option isD25 and 20Distance moved by effort is 20m,that of load is 0.8mVR=LdEdVR=0.820VR=25

Determine the velocity ratio and mechanical advantageA10 and 35B20 and 35C10 and 25D25 and 20EasyOpen in AppSolutionVerified by TopprCorrect option isD25 and 20Distance moved by effort is 20m,that of load is 0.8mVR=LdEdVR=0.820VR=25the load is 10,000N and effort=500N

MA=effortdloadd

MA=effortdloaddMA=50010000

MA=effortdloaddMA=50010000MA=20

Answer:

I think  E--

Explanation:

Answer:

Explanation: If the engines in both of the airplanes are at the same Weight  then The engines in both of the airplanes would stil have the same mass because mass stays the same everywhere

Since mass is constant everywhere, if the engines in both airplanes are at the same weight, the engines in both airplanes would still have the same mass.

Weight is the force an object exerts, mass is the amount of matter that makes up an object. Newton is the SI unit of weight while kilogram is the SI unit of mass.

Given that in question the same type of engine is placed in two different air-planes The first air-plane is twice as heavy as the second Suchane Wrich statement is correct about the mass of the air-plane and its acceleration, assuming a constant net force.

Increasing the acceleration of the air-plane causes the enging to provide more force.

To learn more about acceleration refer to the link:

brainly.com/question/12550364

#SPJ5

Answer:

Answer below, hope this helps!

Explanation:

1. Chemical - e

2.Light - b

3. Sound - g

4. Mechanical - f

5. Kinetic - a

6. Potential - d

7. Energy - j

8. Thermal - c

9. Nuclear - i

10. Electrical - h

Answer:

Chemical - e

Light - b

Sound - g

Mechanical - f

Kinetic - a

Potential - d

Energy - j

Thermal - c

Nuclear - i

Electrical - h

Explanation:

Answer:

what is the full questio n because I can't see the momentum

Answer:  62.25

Explanation: F = ma

F = 7.5 * 8.3

F = 62.25

Thus, the answer is 62.25 Newtons.

Would appreciate brainliest <3

Answer:

30.3 meters, 172 degrees

Explanation:

To insure the most accurate solution, this problem is best solved using a calculator and trigonometric principles. The first step is to determine the sum of all the horizontal (east-west) displacements and the sum of all the vertical (north-south) displacements.

Horizontal: 2.0 meters, West + 31.0 meters, West + 3.0 meters, East = 30.0 meters, West

Vertical: 12.0 meters, North + 8.0 meters, South = 4.0 meters, North

The series of five displacements is equivalent to two displacements of 30 meters, West and 4 meters, North. The resultant of these two displacements can be found using the Pythagorean theorem (for the magnitude) and the tangent function (for the direction). A non-scaled sketch is useful for visualizing the situation.

Applying the Pythagorean theorem leads to the magnitude of the resultant (R).

R2 = (30.0 m)2 + (4.0 m)2 = 916 m2

R = Sqrt(916 m2)

R = 30.3 meters

The angle theta in the diagram above can be found using the tangent function.

tangent(theta) = opposite/adjacent = (4.0 m) / (30.0 m)

tangent(theta) = 0.1333

theta = invtan(0.1333)

theta = 7.59 degrees

This angle theta is the angle between west and the resultant. Directions of vectors are expressed as the counterclockwise angle of rotation relative to east. So the direction is 7.59 degrees short of 180 degrees. That is, the direction is ~172 degrees.

Explanation:

static electricity draws energy