A 43-kg child sits in a massless swing. With what horizontal force must the seat be pulled so that the ropes form an angle of 35o with respect to the vertical

Answer:

301.6 N

Explanation:

The length of the wire L₀ = 8 m and its diameter, d = 4 mm = 4 × 10⁻³ m. Since its temperature drops by  10°C, it will have a change in length ΔL = L₀αΔθ where α = linear expansivity of steel, a 12 × 10⁻⁶ /K, and Δθ = temperature change = -10°C = -10 K(negative since it is a drop)

So, the strain, ε = ΔL/L₀ = αΔθ = 12 × 10⁻⁶ /K × 10 K = 12 × 10⁻⁵

Now the Young's modulus of steel, Y = σ/ε where σ = stress = T/A where T = increase in tension in steel wire and A = cross-sectional area of wire = πd²/4 where d = diameter of wire = 4 × 10⁻³ m and ε = strain = 12 × 10⁻⁵

So, σ = Yε

Since Y = 2 × 10¹¹ N/m².

Substituting the values of the variables into the equation, we have

σ = Yε

σ = 2 × 10¹¹ N/m² × 12 × 10⁻⁵

σ = 24 × 10⁶ N/m²

Since σ = T/A

T = σA

T = σπd²/4

Substituting the values of the variables into the equation, we have

T = σπd²/4

T = 24 × 10⁶ N/m² × π × (4 × 10⁻³ m)²/4

T = 24 × 10⁶ N/m² × π × 16 × 10⁻⁶ m²/4

T = 24 × 10⁶ N/m² × π × 4 × 10⁻⁶ m²

T = 96 N × π

T = 301.59 N

T ≅ 301.6 N

So, the increase in tension in the steel wire is 301.6 N

Answer:

enertia

Explanation:

enertia

The correct answer is (B) Centrifugal Force

The centrifugal force on a vehicle on the curves is outwards or can say away from the curve and pulls the out of the track.

the centrifugal force is given by [tex]F=\frac{mv^{2} }{r}[/tex], which is directly proportional to speed v.

Speed limits on the curves help in reducing the centrifugal force by reducing the speed.

Learn more about centrifugal force:

https://brainly.com/question/25546106

personal to systematic errors

unbiased to random errors

Answer:

Higher-level human resources related to engineering are those who:

Medium Level engineers will normally comprise the following:

Cheers

Answer:

About Transcript. Nuclear binding energy is the energy required to split an atom's nucleus into protons and neutrons. Mass defect is the difference between the predicted mass and the actual mass of an atom's nucleus. The binding energy of a system can appear as extra mass, which accounts for this difference.

Explanation:

PLZ MARK AS THE BRAINLIEST

I NEED IT URGENTLY

HAVE A GOOD DAY

MAY GOD BLESS U

: )

Answer:

D)0.0889kg

Explanation:

If a large atomic bomb produces around 8.00x10¹⁵J of energy, then from Einstein's energy law i.e E=mc² we can calculate that the amount of matter is  0.0889kg. The correct option is D.

The Einstein Energy Law, often referred to as Einstein's famous equation relates the energy of a particle (E) to its mass (m) and the speed of light (c). The equation is as follows:

E = mc²

This equation shows that energy (E) and mass (m) are equivalent and interchangeable and that a small amount of mass can be converted into a large amount of energy. This is the basis for understanding nuclear reactions and the energy released in processes like nuclear fusion and fission.

Here in the question,

To calculate the mass that is converted into energy in an 8.00x10¹⁵J nuclear reaction, we can rearrange the equation to solve for m:

m = E / c²

where c = 3 x 10⁸ m/s is the speed of light in a vacuum.

Substituting the values, we get:

m = 8.00x10¹⁵ J / (3 x 10⁸ m/s)²

m = 0.0889kg

Therefore, a large atomic bomb that produces around 8.00x10¹⁵ J of energy converts approximately 0.0889kg of matter into energy. This is a very small amount of matter, but because c² is such a large number, a huge amount of energy can be released from a small amount of matter in a nuclear reaction.

To learn more about Einstein's energy law click:

https://brainly.com/question/2292817

#SPJ2

Answer:

ccccccccc or bbbbbbb or aaaaaaaa or ddddddd

Answer:

m1=100kg

m2=6×10^24kg

r=6400km

G=6.6×10^-11

F=?

as we know that

F=G m1.m2/r²

F=6.6×10^-11×100×6×10^24/(6400)²

F=6.6×10^-11×6×10^26/4.096×10^7

F=6.6×10^-11×1.465×10^19

F=9.67×10^8N

Answer:

The net force is 91780.8 N.

Explanation:

mass, m = 8950 kg

Radius, R = 9.33 miles = 15015.2 m

Time, T = 0.123 h = 442.8 s

There are two forces acting on the plane.

Horizontal force is the centripetal force and the vertical force is the weight.

[tex]Fx =m R w^2\\\\Fx = m R \frac{4\pi^2}{T^2}\\\\Fx = 8950\times 15015.2\times \frac{4\times 3.14\times 3.14}{442.8\times 442.8}\\\\Fx = 27030.8 N \\\\Fy = m g \\\\ Fy = 8950\times 9.8 \\\\Fy = 87710 N[/tex]

The net force is

[tex]F = \sqrt{Fx^2 + Fy^2}\\\\F = \sqrt {27030.8^2 + 87710^2}\\\\F = 91780.8 N[/tex]

Answer:

as we know

p=1/f

p=1/-40m

p=  -0.025d

you have written the unit of focal length wrong it is the unit of power

please mark as brainliest plzzzzzzzzzz

Answer:

d. No, porque la ecuación de trabajo lo define.

Explanation:

En Física, el trabajo realizado se puede definir como la cantidad de energía transferida cuando un objeto o cuerpo se mueve a lo largo de una distancia debido a la acción de una fuerza externa.

Matemáticamente, el trabajo realizado viene dado por la fórmula;

[tex] W = F * d [/tex]

Dónde;

Por lo tanto, podemos deducir de la definición de trabajo y su fórmula que el trabajo se realiza cuando un objeto (cuerpo) se mueve una distancia o experimenta cualquier forma de desplazamiento mientras transfiere energía.

Answer: True

Explanation:

It should be noted that when refrigerant is added in vapor form to the operating refrigeration system, then the addition of the refrigerant should be to the low-pressure side of the refrigeration system.

Furthermore, when system pressures are lower than the pressure in the refrigerant tank as stated in the question, then the refrigerant can be added to both the high and low pressure sides of the system.

Therefore, the correct option is true.

Answer:

13.5 x 10^(11) N

Explanation:

Given :

The magnitude of charge 1 = q1 = 3 × 10^(-5) C

The magnitude of charge 2 = q2 = 5 × 10^(4) C

The distance between charges = d = 10 cm = 0.1 m

To Find :

The magnitude of electrostatic force acting between charges

Solution :

∵ Electrostatic force = F = (k × (q1) x (q2)) / r^(2)

where k = 9 × 10^(9)

i.e    F = 9 × 10^(9) × (3 × 10^(-5) × 5 × 10^(4)) / (0.1)^(2)  

Or, F =  9 × 10^(9) ×  (1.5/0.01)  

∴   F = 9 × 10^(9) × 150

i.e F = 1350 × 10^(9)

or,  Force = F = 1.35 × 10^(12) N

Hence, The magnitude of electrostatic force acting between charges is  1.35 × 10^(12) N => 13.5 x 10^(11)

Answer:

Explanation:

We first need to convert the 40 km/h to m/s. Going by the fact that 40 has only 1 significant figure in it, 40 km/h = 10 m/s. The rest of the values are in their proper labels. We will use the equation:

[tex]v^2=v_0^2+2a[/tex]Δx where the final velocity is 0 because the car is coming to a stop at the end; the initial velocity is 10 m/s, the acceleration (or, rather, deceleration) is -.5 m/s/s, and our unknown which is displacement. Filling in:

[tex]0=(10)^2+2(-.5)[/tex]Δx and solving for Δx:

Δx = [tex]\frac{-100}{2(-.5)}[/tex] which ends up being simply that

Δx = 100 m

Answer:

a. Effort = 960 Newton

b. Mechanical advantage (M.A) = 0.625

c. Velocity ratio (V.R) = 1.67

Explanation:

Given the following data;

Conversion:

100 cm = 1 m

X cm = 0.75 m

Cross-multiplying, we have;

X = 0.75 * 100 = 75 cm

First of all, we would find the effort arm;

Effort arm = length of crow bar - length of load arm

Effort arm = 200 - 75

Effort arm = 125 cm

Next, we would determine the mechanical advantage (M.A) of the crow bar;

[tex] M.A = \frac {Effort \; arm}{Load \; arm} [/tex]

Substituting the values into the formula, we have;

[tex] M.A = \frac {125}{200} [/tex]

M.A = 0.625

To find the effort of the crow bar;

[tex] M.A = \frac {Load}{Effort} [/tex]

Making "effort" the subject of formula, we have;

[tex] Effort = \frac {Load}{M.A} [/tex]

[tex] Effort = \frac {600}{0.625} [/tex]

Effort = 960 Newton

Lastly, we would determine the velocity ratio (V.R);

[tex] V.R = \frac {length \; of \; effort \; arm}{length \; of \; load \; arm} [/tex]

[tex] V.R = \frac {125}{75} [/tex]

V.R = 1.67

Momentum is conserved, so the sum of the momenta of the bullet and block before collision is equal to the momentum of the combined bullet-block system,

[tex]m_bv_b+m_wv_w = (m_b+m_w)v[/tex]

where v is the speed of the bullet-block system. The block starts at rest so it has no initial momentum, and solving for v gives

[tex]v = \dfrac{m_b}{m_b+m_w} v_b[/tex]

The total work W performed by the spring on the bullet-block system as it is compressed a distance x is

[tex]W = -\dfrac12kx^2[/tex]

where k is the spring constant, and the work done is negative because the restoring force of the spring opposes the bullet-block as it compresses the spring.

By the work-energy theorem, the total work done is equal to the change in the bullet-block's kinetic energy ∆K, so we have

[tex]W_{\rm total} = W = \Delta K[/tex]

The bullet-block starts moving with velocity v found earlier and comes to a stop as the spring slows it down, so we have

[tex]-\dfrac12kx^2 = -\dfrac12(m_b+m_w)v^2 \implies kx^2 = \dfrac{{m_b}^2}{m_b+m_w}{v_b}^2[/tex]

Solve for [tex]m_w[/tex]:

[tex]m_w=\dfrac1k\left(\dfrac{m_bv_b}x\right)^2-m_b[/tex]

[tex]m_w=\dfrac1{205\frac{\rm N}{\rm m}}\left(\dfrac{(0.0135\,\mathrm{kg})\left(245\frac{\rm m}{\rm s}\right)}{0.350\,\rm m}\right)^2-0.0135\,\mathrm{kg}\approx \boxed{0.422\,\mathrm{kg}}[/tex]

Answer:

km/hr

Explanation:

Addition and subtraction are commutative

Meaning you can add or subtract in any order because it doesn't change the sum or the difference. So it doesn't change the units.

Answer:

km/ hr + km/ hr =(km+ km)/hr=2km/hr

Explanation:

Answer:

gravity

Explanation:

We use gravity to do different force.

Answer:

D) crystalline solid that conducts current under certain conditions

Explanation:

A semiconductor is any crystalline solid material whose electrical conductivity is intermediary between that of insulators and conductors. That is, a semiconductor does not conduct like a conductor but does more than an insulator.

Based on this, a semiconductor is said to only conduct electricity under certain conditions as opposed to conductors that do so under any condition. Example of semiconductors are silicon, carbon, antimony, arsenic etc.

Answer:

According to Henry Moseley, Atomic number is the fundamental property of the elements because elements are made up of atoms . ... So the physical and chemical properties of elements are periodic functions of their atomic number.

Answer:

96 meters

Explanation:

d = st

d = (8 m/s)(12 s)

d = 96 m

Vertically, the object is in equilibrium, so that the net force in this direction is

∑ F (vertical) = n - mg = 0

where n is the magnitude of the normal force due to the contact between the object and surface. You're given that the object's weight is mg = 550 N, so n = 550 N as well.

Horizontally, the net force would be

∑ F (horizontal) = p - f = 0

where p is the magnitude of the applied force and f is the magnitude of (kinetic) friction opposing p. Now,

f = 0.012n = 0.012 (550 N) = 6.6 N

so that you need to apply a force of p = 6.6 N to keep the object sliding at a steady pace.

Answer:

Parallel

Explanation:

The work done is defined as the force applied on an object and the displacement in the position of the object in the direction of force.

W = F s cos A

where, F is the force, s is the displacement and A is the angle between force and displacement.

When the angle between the force and the displacement is 90 degree, the work done is zero.

To get the maximum work the angle between the force and the displacement is 0 degree.

So, to get the work done by the force the angle between the force and displacement is 0 degree that means the force and displacement is parallel to each other.

Answer:

Because white color reflects back the heat coming from the sun while dull colors absorb the heat.

Answer:

Because of the interstellar dust and interior location of the solar system.

Explanation:

We will probably not be able to detect the neutral hydrogen that gives rise to the 21-cm radio signal if we point a large optical telescope to the region because, the interstellar dust obscures the location of the spiral arm of the Milky way galaxy and this makes neutral hydrogen that gives rise to the 21-cm radio signal difficult to detect.

Also, the interior location of the solar system also makes the neutral hydrogen that gives rise to the 21-cm radio signal difficult to detect.

So, the interstellar dust and the interior location of the solar system makes it difficult to detect the neutral hydrogen that gives rise to the 21-cm radio signal with a large optical telescope.

1. The average speed of Luis over the 60 s is 1.33 m/s

2. The average velocity of Luis over the 60 s is zero.  

1. The average speed can be calculated with the following equation:

[tex] S = \frac{d}{t} [/tex]

Where:

d: is the total distance traveled

t: is the total time = 60 s

The total distance can be calculated by the sum of the distance traveled to the truck (40 m) and the distance traveled to his home (the same 40 m), as follows:

[tex] d = 40 m + 40 m = 80 m [/tex]

So, the average speed is:

[tex] S = \frac{d}{t} = \frac{80 m}{60 s} = 1.33 m/s [/tex]

Hence, Luis's average speed over the 60 s is 1.33 m/s.

2. Now, the average velocity is a vector given by:

[tex]v = \frac{\Delta x}{\Delta t} = \frac{x_{f} - x_{i}}{t}[/tex]

Where:

[tex]x_{f}[/tex]: is the final distance traveled (the way to his home) = 40 m

[tex]x_{i}[/tex]: is the initial distance traveled (the way to his truck) = 40 m

Δt: is the total time = t = 60 s

Given that Luis in his journey, returns to the same starting point (his house), the total displacement is zero, and so the average velocity is also zero:                              

[tex]v = \frac{x_{f} - x_{i}}{t} = \frac{40 m - 40 m}{60 s} = 0[/tex]

Therefore, Luis's average velocity over the 60 s is zero.  

You can find more about average speed and average velocity here: https://brainly.com/question/12322912?referrer=searchResults

I hope it helps you!                                              

As shown in the figure below, Luis rushes 40 m toward his truck. He notices he forgot his shoes and returns back to his house. His total travel time is 60 s.

Answer:

What is Luis’s average velocity over the 60 s period?

Answer: 0 m/s

What is Luis’s average speed over the 60 s period?

Answer: 1.33  m/s

Answer:

When the plane is rest position it possess potential energy. But when a aeroplane is flying at the height it possess kinetic energy. No matter what height is given.

Explanation:

Particles in solids are always vibrating (moving back and forth) in place.

Answer:

With air resistance, acceleration throughout a fall gets less than gravity (g) because air resistance affects the movement of the falling object by slowing it down. How much it slows the object down depends on the surface area of the object and its speed

Explanation:

PLZ MARK AS THE BRAINLIEST

HAVE A GOOD DAY

: )