a block of mass 0.10kg is attached and secured to one end of a spring with spring constant 50nm. the other end of the spring is secured to a wall. the block is pushed against the spring, which compresses the spring to a position of x

Answers

Answer 1

The block has maximum speed at 0.00 m, The friction  block has half the initial spring potential energy at = -0.025 m

The correct answer is B,C

Friction between two lines is what?

The force preventing solid surfaces, liquid layers, and sliding material components from moving in the same direction is known as friction. Friction can take many different forms: The relative lateral movement of two solid surfaces that are in contact is opposed by dry friction.

We have given the Force Constant of spring K= 50 N/m.

At x=-0.02 m, Force =-kx

F= -(-0.02\times 50)= 1N Hence Option (A) will be correct.

A ND also  block has maximum speed at x=0m at equilibrium position because

All the  potential Energy get converted to Kinetic Energy.  

What do you mean by frictional force?

The opposing force that causes two surfaces to move in that direction or in the opposite direction when they come into contact is called frictional force. Since it is a force which resists or resists the movement of something when it comes into contact with another object and slides against it,

To know more about friction visit:

https://brainly.com/question/13000653

#SPJ4

The correct question is

A block of mass 0.10 kg is attached and secured to one end of a spring with spring constant 50. The other end of the spring is secured to a wall. The block is pushed against the spring, which compresses the spring to a position of z=-0.04 m. When uncompressed, the end of the spring that is attached to the block is at a position of = 0.00 m. The block-spring system is then released from rest, and the block travels along a horizontal, rough track. A motion sensor is placed so that it measures the velocity of the object as it slides along the track. A graph of total mechanical energy of the block-spring system as a function of position is shown. Which of the following statements about the block-spring system are true? Select two answers.

A-The force exerted on the block by the spring at z=-0.02 m is 1 N.

B-The block has maximum speed at 0.00 m.

C-The block has half the initial spring potential energy at = -0.025 m

D-The work done by friction as the block travels from -0.04 m to -0.02 m is 0.01 J.


Related Questions

A series rl circuit is connected to a 110-v ac source. if the voltage across the resistor is 85 v, find the voltage across the inductor.

Answers

The voltage across the inductor is 69.82V

In an RL series circuit connected to an AC source, the voltage across the resistor and the voltage across the inductor are in phase with each other.

This means that the voltage across the resistor and the voltage across the inductor will have the same frequency and will be in the same phase. Since we know the voltage across the resistor is 85 V, the remaining voltage must be across the inductor.

The voltage across the inductor is equal to the total voltage from the AC source minus the voltage across the resistor, so the voltage across the inductor is

110V = [tex]\sqrt{VR2^{2}+VL2^{2} } \\\sqrt{85V^{2}+VL2^{2} } \\V_{L2} = \sqrt{110V^{2}- 85V^{2} } = 69.82V[/tex]

To learn more about inductor:

https://brainly.com/question/4425414

#SPJ4

A man lifts a 19 kg barbell 0.6 m above his head in 0.5 sec. How much power (in watts) does he generate?

Answers

The power (in watts) generated by the man, given that he lifts a 19 Kg barbell 0.6 m above his head in 0.5 sec is 223.44 W

How do i determine the power generated by the man?

Power can be defined as the rate at which work is done. The mathematical representation of power is given below:

Power (P) = work (W) / time (t)

But

Work = mass (m) × acceleration due to gravity (g) × height (h)

Therefore,

P = mgh / t

Using the above formula, we can obtain the power generated by the man as follow:

Mass (m) = 19 KgHeight (h) = 0.6 mTime (t) = 0.5 secondsAcceleration due to gravity (g) = 9.8 m/s² Power (P) = ?

P = mgh / t

P = (19 × 9.8 × 0.6) / 0.5

P = 111.72 / 0.5

P = 223.44 W

Thus, we can conclude that the power generated is 223.44 W

Learn more about power:

https://brainly.com/question/20353916

#SPJ1

A +38 C point charge is placed 36 cm from an identical
+38 uC charge. A
- 1.5 C charge is moved from point A
to point B as shown in Fig. 17-47. What is the change in potential energy?

Answers

Charge multiplied by potential difference equals the decrease in potential energy (equation 20-2). The gain in thermal energy reflects the gain in potential energy, and this can be used to calculate the speed.

What causes a shift in potential energy?

Potential Energy depletes in the direction of the gravitational force, which is the conservative force operating on the body in this instance. As a result of the fact that gravity always pulls something downward, a body's potential energy increases when it rises and decreases when it falls.

In simple terms, what is potential energy?

This energy that is held in an object as a result of its position in relation to a zero position is known as potential energy, to put it simply. If an object is placed at a height below (or below) the zero height, it has gravitational potential energy.

To know more about potential energy Visit:

https://brainly.com/question/24284560

#SPJ1

A ball is thrown upward with an initial velocity vo from the surface of the earth. The motion of the ball is affected by a drag force equal to mγv2 (where, m is mass of the ball, v is its instantaneous velocity and γ is a constant). Time taken by the ball to rise to its zenith (maximum height) isA1√2γgtan−1(√2γgv0)B1√γgtan−1(√γgv0)C1√γgsin−1(√γgv0)D1√γgln(1+√γgv0)

Answers

B) 1√γg tan−1(√γ/g) v0 is the time taken by the ball to rise to its zenith (maximum height).

Why does drag force exist?

As an outcome of collisions among moving objects and the molecules of a fluid like air or water, drag is a force that hinders or resists motion. Even though it inhibits motion like surface friction does, drag only occurs in flowing fluids. Drag is a force acting against the relative movement of any moving object with relative to a surrounding fluid in fluid dynamics. It is sometimes alluded to as fluid friction, air resistance, or another sort of friction.

-(g + γv^2) = dv/dt

=> -gdt = g/γ (dv/ (g/γ+v^2))

integration 0=>t ; vo => 0=>

=> -gt = -√g/γ tan^-1(vo/√gγ)

=> t= 1√γg tan−1(√γ/g) v0

Learn more about drag force here:

brainly.com/question/27176151

#SPJ4

A ball is thrown upward with an initial velocity vo from the surface of the earth. The motion of the ball is affected by a drag force equal to mγv2 (where, m is mass of the ball, v is its instantaneous velocity and γ is a constant). Time taken by the ball to rise to its zenith (maximum height) is

A) 1√2γg tan−1(√2γ/g) v0

B) 1√γg tan−1(√γ/g) v0

C) 1√γg  sin−1(√γ/g) v0

D) 1√γg ln(1+√γ/g) v0

The half-life of Po-211 is approximately 500 ms (half a second). Without using the PhET model, sketch a pie graph indicating the number of undecayed P0-211 atoms for a reaction starting with 100 total atoms. o t= 0.55 t=1.0s te1.55 t=2s Now, simulate the decay of 100 pd 211 atoms by adding 100 atoms from the "Bucket o Polonium". Sketch what the pie graph looks like at the times shown. t=0.5s t=1.0s t=1.55 t=2s 3 Compare VOL prediction to the resulte that heened Hourcan aynlain any discronancies?

Answers

The pie graphs would show the number of undecayed Po-211 atoms in each case.

What is half life?

Half life is defined as  the time that it takes for half of the original value of some amount of a radioactive element to decay.

Given, half-life of Po-211 is 500 ms

At t = 0.5s (500 ms), 50 atoms of Po-211 will have decayed, leaving 50 atoms remaining.

And at t = 1.0s, 25 atoms of Po-211 will have decayed, leaving 25 atoms remaining ; At t = 1.55s, 12.5 atoms of Po-211 will have decayed, leaving 12.5 atoms remaining ; At t = 2s, 6.25 atoms of Po-211 will have decayed, leaving 6.25 atoms remaining.

So, the pie graphs would show the number of undecayed Po-211 atoms in each case.

To know more about half life, refer

https://brainly.com/question/1160651

#SPJ4

You toss a marble straight upward. Which of the following statements best describes the motion of the marble at the point where it reaches its maximum height?
A) At its maximum height, the marble has a velocity of 9.8 m/s downward.
B)At its maximum height, the marble has an upward velocity for an infinitesimal (zero-length) amount of time.
C)At its maximum height, the marble has a velocity of zero for an infinitesimal (zero-length) amount of time

Answers

The motion of marble at its highest point is best described by the following statements: The stone has a downward acceleration of 9.8 m/s at its highest point.

How is velocity determined?

You divide the amount by the time that it takes you travel this very same distance to calculate velocity, and then users add your directions to it. For instance, if you were traveling west and covered 50 miles in an hour, your speed would be 50 mph westward or 50 miles per hour.

What are some examples of velocity?

Velocity can be defined as the rate that an object moves in a specific direction. like the pace of a car driving north on something like a highway or the pace of a rocket, for instance after launch, travels. Because the velocity vector is scalar, its absolute value magnitude will always equal the motion's speed.

To know more about acceleration visit :

https://brainly.com/question/12550364

#SPJ4

What is the radius of a hemisphere with a volume of 61326 ft^3

, to the nearest tenth of a foot?

Answers

The radius of a hemisphere with a volume of 61326 ft^3 , to the nearest tenth of a foot is 30.827 f.

The volume of a sphere with radius R is known to be:

V = (4/3)*pi*R^3

in where pi = 3.14

A hemisphere is half a sphere, its volume is half that of a sphere, and its volume is as follows for a hemisphere of radius R:

V' = (1/2)*(4/3)*pi*R^3

Now that we are aware of the volume of our hemisphere:

V' = 61326 ft^3

The equation is then easy to solve:

61326 ft^3 = (1/2)*(4/3)*pi*R^3

For R.

(We need the diameter, but knowing the radius is a good place to start because the diameter is equal to two times the radius.)

61326 ft^3 = (1/2)*(4/3)*pi*R^3

61326 ft^3 = (4/6)

*3.14*R^3

61326 ft^3*(6/4*3.14) = R^3

∛( 61326 ft^3*(6/4*3.14) ) = R = 30.827 f

To learn more about volume of hemisphere from given link

https://brainly.com/question/24068499

#SPJ1

A hydrogen nucleus, which has a charge e, is situated to the left of a carbon nucleus which has a charge 6e. Which statement is true? A) The electrical force experienced by the hydrogen nucleus is to the left, and the magnitude is equal to the force exerted on the carbon nucleus. B) The electrical force experienced by the hydrogen nucleus is to the left, and the magnitude is greater than the force exerted on the carbon nucleus. C) The electrical force experienced by the hydrogen nucleus is to the left, and the magnitude is less than the force exerted on the carbon nucleus. D) The electrical force experienced by the hydrogen nucleus is to the right, and the magnitude is equal to the force exerted on the carbon nucleus

Answers

The electrical force experienced by the hydrogen nucleus is to the left, and the magnitude is equal to the force exerted on the carbon nucleus has a charge e, is situated to the left of a carbon nucleus which has a charge 6e. In this case, Option A is correct

What is a force, according to physics?

The correct statement is that the electrical force acting on the hydrogen nucleus to the left is equal in strength to the force acting on the carbon nucleus.Physics states that a force is a pulling motion that modifies an object's velocity. A force that has the ability to change a body's resting or motion state is known as an external force. It has a magnitude and a vector.Items are drawn toward the center of a moon or other entity by a force.

To know more about Force visit:

brainly.com/question/12785175

#SPJ4

Compare the tension in the coupling between the first two cars of a train with the tension in the coupling between the last two cars when (a) the train's speed is constant and (b) the train is accelerating.

Answers

The tension between the cars when the train's speed is constant will be zero and when the train is accelerating then there will be more tension between first two cars than last two.

The coupling's tension T is equal to the force is used against it. It moves in the opposite direction of the force being applied. The acceleration will be 0 while the train is running at constant speed. Thus, there is tension at the value of the two specified cars will be zero.

The link between the vehicles feels tension as the train accelerates. Assume the train has n number of cars for the sake of clarity. T1 and T2 refer to the tension at the first two and last two cars, respectively.

Let m represent the car's mass. Due to its need to draw the (n-11) masses, the coupling between the first two vehicles is under the most strain. Consequently, there is tension on the coupling between first two vehicles are,

T₁= (n-1)ma

However, because they are only required to pull the final two cars, there is no friction between them. Hence,

T= ma

As a result, there is more tension between the first two cars than the last two.

Learn more about tension

brainly.com/question/15880959

#SPJ4

5.19 block a in fig. 8.32 has mass 1,00 kg, and block bla, block a? b) how much potential energy was stored in the

Answers

When blocks are forced together, they compress a massless spring between them, storing 0.75 J of potential energy in the process.

What is potential energy?

Potential energy in physics is the energy that an object retains as a result of its position in relation to other objects, internal stresses, electric charge, or other elements. Potential energy is a form of stored energy that is dependent on the relationship between different system components. When a spring is compressed or stretched, its potential energy increases.

Here,

let velocity of A be uf.

Maui+Mbvi=Mauf+Mbvb

0=1*uf+2*0.5

uf=-1 m/s

PE=ΔKE

=1/2*Ma*uf²+1/2*Mb*vf²

=1/2*1*1²+1/2*2*0.5²

PE=0.75 J

When blocks are forced together, a massless spring between them is compressed, storing 0.75 J of potential energy.

To know more about potential energy,

https://brainly.com/question/24284560

#SPJ4

complete question:

Block A in the figure has a mass of 1 kg and block B has a mass of 2 kg. The blocks are forced together compressing a mass-less spring between them and the system is released from rest on a level friction less surface. The spring is not fastened to either of the blocks, when spring regains its natural length, block B acquired a speed of 0.5 m/s. How much potential energy was stored in the compressed spring?

at the county fair, chris throws a 0.12 kg baseball at a 2.4 kg wooden milk bottle, hoping to knock it off its stand and win a prize. the ball bounces straight back at 10 % of its incoming speed, knocking the bottle straight forward.

Answers

The bottle's speed, as a percentage of the ball's incoming speed hence 6.5% Initial=Final  The left side of Initial is and the right side of Final m1v1+m2v2= 0.065

What is the beginning?

the name's initial letter. initials plural: each word's first letter in a whole name. discovered that they shared the same initials: a capital letter that starts a sentence, paragraph, or division.The ball weighs 0.12 kilogram.

m1= 0.12 kg Ball

m2= 2.4 kg Wooden Bottle

Initial=Final ( no impulse going on) Initial is the left side and Final the right side

m1v1+m2v2= - m1v1+m2v2 (negative the final m1v1 because it goes contrary as it bounces back)

Your equation should look:

0.12kg(v1)+0 (bottle was on rest)= -0.12(0.3)v1+ 2.4kgv2

0.12kgv1 + 0.036v1=2.4kgV2

0.156V1=2.4kgV2

0.065=(v2/v1)

hence 6.5%

Is it okay to use my last name's initial?

Your family is known by your last name. It is also known as "last name." When completing applications, type your last name exactly as it appears on your identity or travel document. Use only full names.

To know more about Initial=Final visit:

https://brainly.com/question/28526047

#SPJ4

The correct question is

At the county fair, Chris throws a 0.12kg baseball at a 2.4kg wooden milk bottle, hoping to knock it off its stand and win a prize. The ball bounces straight back at 30% of its incoming speed, knocking the bottle straight forward.

What is the bottle's speed, as a percentage of the ball's incoming speed?

Express your answer using two significant figures.

A car in stop-and-go traffic starts at rest, moves forward 22 m in 8.0 s, then comes to rest again. The velocity-versus-time plot for this car is given in the figure.

a. What distance does the car cover in the first 4.0 seconds of its motion?

b. What distance does the car cover in the last 2.0 seconds of its motion?

c. What is the constant speed V that characterizes the middle portion of its motion?

Answers

a. In the first 4.0 seconds of its motion, the car is accelerating from rest to a certain velocity. From the velocity-versus-time graph, we can see that the velocity increases linearly with time. Therefore, we can use the equation: distance = (initial velocity + final velocity) / 2 * time to calculate the distance covered by the car in the first 4.0 seconds.

In this case, the initial velocity is 0 m/s and the final velocity is V, where V is the velocity after 4.0 s. Therefore, the distance covered by the car in the first 4.0 seconds is (0 + V) / 2 * 4 = 2V * 4.

b. In the last 2.0 seconds of its motion, the car is decelerating from a certain velocity to come to rest again. From the velocity-versus-time graph, we can see that the velocity decreases linearly with time. Therefore, we can use the equation: distance = (initial velocity + final velocity) / 2 * time to calculate the distance covered by the car in the last 2.0 seconds.

In this case, the initial velocity is V, where V is the velocity before 2.0 s and the final velocity is 0 m/s. Therefore, the distance covered by the car in the last 2.0 seconds is (V + 0) / 2 * 2 = V * 2

c. The middle portion of the car's motion corresponds to the constant velocity segment of the graph. From the graph, we can see that the velocity is a constant value for the middle portion of the motion. Therefore, we can read the value of V from the graph, it is the slope of the line from the graph, which is 22/8 = 2.75 m/s.

Please help with B I don’t understand why you have to switch it round!!!

Answers

Answer:

W = 90 kg* 9.8 m/s^2 = 882 N      apparent weight of stretcher and occupant

F = M a      straightforward application of Newton's Second Law

F = (940.5 - 882) a

a = .65 m/s^2      acceleration of stretcher and occupant

coal is a source of nonrenewable energy commonly used in the united states for the generation of electricity. which of the following best explains why the supply of coal should be conserved since it is a source of nonrenewable energy?

Answers

The following best explains why supply of coal should be conserved since it is a source of nonrenewable energy :The conditions of the environment now are different from environment when coal first formed.

Why is coal considered as a non renewable energy source?

Coal is classified as a nonrenewable energy source because it takes millions of years to form and coal contains energy stored by plants that lived hundreds of millions of years ago in swampy forests. Layers of dirt and rock covered the plants millions of years.

According to the U.S. Energy Information Administration, most of the electricity was generated by natural gas, nuclear energy, and coal in 2020. Electricity can also be produced from renewable sources such as wind, hydropower, solar power, biomass, wind and geothermal.

To know more about non renewable energy, refer

https://brainly.com/question/15782494

#SPJ4

Note : The question given on the portal is incomplete. Here is the complete question.

Question: Coal is a source of nonrenewable energy commonly used in the united states for the generation of electricity. which of the following best explains why the supply of coal should be conserved since it is a source of nonrenewable energy?

The conditions of the environment now are different from environment when coal first formed.

Coal is not largest source of energy for generating electricity in the world.

Once they exhausted, they can be renewed again for millions of years.

Coal is easy to store.

the output from an and gate is high when . all inputs are high all inputs are low one input is high and the remaining inputs are low one input is low and the remaining inputs are high

Answers

The output of a NAND gate (also known as a NOT-AND gate) complements that of an AND gate because it only provides a false output if all of its inputs are true.

If the output is high, what are the inputs of an AND gate?

Only when all inputs are HIGH will an AND gate's output be HIGH. When one or more inputs are LOW, a NAND gate's output is HIGH.

Which logic gate, when any input is high, outputs low values? A AND, B, OR C, N, OR D?

The truth table for the NOR gate is displayed above and indicates that this logic gate is one that outputs low values when any of the inputs are high.

To know more about NAND gate visit:-

https://brainly.com/question/17307458

#SPJ4

when an object effected by gravity on earth is spinning in a non-vertical circle, there is a small angle between the spin of the object and the actual horizontal

Answers

For minor displacements, gravity has very little effect on an object's horizontal motion. This suggests that the spin and horizontal are at a little angle and that the horizontal velocity is constant.

Motion is defined as a change in an object's location with respect to time. A book tumbling off a table, water running from a faucet, rattling windows, etc. are examples of motion. In physics, a force is an effect that has the ability to change how an object moves. A mass-containing object's velocity or acceleration can be altered by a force (for example, moving from a condition of rest). Force can also be intuitively described as a push or a pull.

Learn more about force here

https://brainly.com/question/13191643

#SPJ4

The complete question is-

when an object effected by gravity on earth is spinning in a non-vertical circle, there is a small angle between the spin of the object and the actual horizontal, explain?

In 1992, Ukrainian Sergei Bubka used a short pole to jump to a height of 6.13 m. If the maximum potential energy associated with Bubka was 4.80 kJ at the midpoint of his jump, what was his mass?

Answers

Ukrainian Sergei Bubka mass is 79.8 kJ t the midpoint of his jump.

What is mass?

Mass can be experimentally defined as a measure of the body's inertia, meaning the resistance to acceleration (change of velocity) when a net force is applied.

h=6.13 meters

mg=9.81 m/s2

PEg= 4.80  ×10^3J

The mas is Unknown=

We will Use the equation for gravitational potential energy, and rearrange it to solve for mass

Therefore  PEg = mgh

mass = PEg / gh

mass =  4.80  ×10^3 / 9.81  x 6.13

mass = 79.8 kJ

Learn  more about mass at: https://brainly.com/question/28021242

# SPJ1

estimate the number of people in the world who are suffering from the common cold on any given day. (answers may vary. remember that a person suffers from a cold for about a week, and assume that the average person catches a cold twice a year. the population of earth is approximately six billion.)

Answers

The number of people in the world who are suffering from the common cold on any given day is 230,136,986

The common cold, sometimes known as the cold, is an infectious viral disease of the upper respiratory tract that primarily affects the nasal, pharyngeal, sinus, and laryngeal respiratory mucosa. Less than two days after the virus has been exposed, signs and symptoms may start to manifest. These symptoms could include fever, headache, runny nose, sneezing, and coughing. However, certain symptoms can continue up to three weeks. Most people recover in seven to 10 days. Sometimes people with other health issues can get pneumonia.The majority of the more than 200 viral strains that have been linked to the common cold include rhinoviruses, coronaviruses, adenoviruses, and enteroviruses.

From given data, the probability for a person to suffer from a cold on any given day is

   [tex]\frac{2\times7}{365}[/tex]= [tex]\frac{14}{365}[/tex]

Given there are 6 billion people, so [tex]6000000000\times\frac{14}{365}[/tex] = 230,136,986 people per day have a cold.

Learn more about common cold

brainly.com/question/9783269

#SPJ4

Along which of the lines (A to H) in (Figure 2) should charge 3 be placed so that the free-body diagrams of charge 1, charge 2, and charge 3 are consistent?

Answers

Line F should charge 3 be placed so that the free-body diagrams of charge 1, charge 2, and charge 3 are consistent.

What is free-body diagrams?


Free-body diagrams (FBDs) are a type of graphical representation used in engineering and physics to show the equilibrium of forces acting on a body or system. They are used to illustrate the components of a force and the sum of the forces acting on a body. They help to analyze the forces acting on a body in a given situation.

FBDs are a helpful tool for visualizing the magnitude and direction of each force acting on an object, and for determining the net force and the resulting motion of the object. FBDs depict the individual forces acting on a body, including external forces, weight, friction, and tension.

They also enable engineers to calculate the forces acting on an object, such as the forces acting on a beam or a structure, in order to design and build systems such as bridges, buildings, and machines.

To learn more about free-body diagrams

https://brainly.com/question/17849049

#SPJ4

Complete question:

a force is applied to a block sliding along a surface (figure 2). the magnitude of the force is 15 nn , and the horizontal component of the force is 4.5 nn . at what angle (in degrees) above the horizontal is the force directed? express your answer in degrees to two significant figures.

Answers

As a result, the force is pointed 72.5 degrees above the horizontal. The resulting force given to an item is precisely proportional to the object's mass and acceleration, according to Newton's second law of motion.

If a force of size F = 15 N is applied at an angle from the horizontal, its horizontal component is F cos and its vertical component is F sin.

Given is the horizontal component, F cos = 4.5 N 15 N. cos = 4.5 N, cos = 0.3, cos = cos1 0.3, and cos = 72.5°

In the everyday lives of students, the word "force" may signify many different things. These widespread interpretations have a significant impact on how pupils grasp the concept of "force."

Students frequently hold the belief that forces have some sort of tangible presence and are ingrained in moving objects. An item in motion is said to "contain" or "have" force. Some pupils believe that such a force maintains motion;

Learn more about Force here:

https://brainly.com/question/11911194

#SPJ4

click on the button with two coils in it in the lower part of the window. the circuit should now have two sets of coils. place the bar magnet inside the coil containing two loops. try to find a location where the stationary magnet induces a current in the coil and causes the light bulb to shine. which of the following is correct? a) The light bulb shines due to an induced current if the magnet is inside the coil.
b) There is no induced current in the coil, so the light bulb does not shine, if the magnet is stationary (for any location of the magnet).
c) The light bulb shines due to an induced current if one pole of the magnet is near the middle of the coil.

Answers

The size of this induced voltage is related to the speed or velocity of the movement, which causes a coil or loop of wire to experience a voltage as a result of moving it through a magnetic field.

Does the voltage change depending on how quickly you move the magnet inside the coils? An Moving Magnet's Electromagnetic Induction.The size of this induced voltage is related to the speed or velocity of the movement, which causes a coil or loop of wire to experience a voltage as a result of moving it through a magnetic field.The total induced emf rises with the number of loops added, increasing the amount of current flowing through the bulb and resulting in a brighter illumination.The button with the bar magnet and two semicircular arrows on the bottom right can be clicked to change the polarity of the bar magnet.Alternating current is created if the coil or magnet is repeatedly pushed back and forth.

To learn more about magnetic field refer

https://brainly.com/question/14411049

#SPJ4

The type of galaxy that consists almost entirely of old stars and is thus less blue (more yellow and reddish) than the other types is:a.) elliptical
b.) barred spiral
c.) all of the above consist almost entirely of old stars
d.) spiral
e.) irregular

Answers

The type of galaxy that consists almost entirely of old stars and is thus less blue than the other types is: a.) elliptical.

What do you understand by galaxy?

Galaxy is a sprawling space system that is composed of stars, dust, interstellar gas, stellar remnants and dark matter. They are all held together by gravity and the word 'Galaxy' is termed from the Greek word 'galaxies'. Their appearance and composition are shaped over billions of years by interactions with the groups of stars and other galaxies.

Recent studies of dynamics of galaxies confirm fundamental inference made 25 years ago from studies of the kinematics of stars within galaxies: on scales larger than galactic nuclei, dominant physical interaction is gravity.

To know more about galaxy, refer

https://brainly.com/question/17117676

#SPJ4

A solid sphere rolls along a horizontal, smooth surface at a constant linear speed without slipping.
What is the ratio between the rotational kinetic energy about the center of the sphere and the sphere’s total kinetic energy?


1. None of these

2. [tex]\frac{3}{5}[/tex]

3. [tex]\frac{3}{7}[/tex]

4. [tex]\frac{2}{5}[/tex]

5. [tex]\frac{7}{2}[/tex]

6. [tex]\frac{2}{7}[/tex]

7. [tex]\frac{5}{3}[/tex]

Answers

Answer:

6. 2/7

Explanation:

It's true

A dart is thrown horizontally at a speed of 12 m/s at the bull's-eye of a dartboard 2.7 m away. How far below the intended target does the dart hit

Answers

To solve this problem, we can use the equations of motion for projectile motion. Since the dart is thrown horizontally, we know that there is no vertical velocity and that the only acceleration acting on the dart is gravity, which is 9.8 m/s^2 downward.

The vertical motion of the dart can be described by the equation:

y = y0 + v0t + 0.5at^2

where y is the vertical position of the dart, y0 is the initial vertical position (which is 0 in this case), v0 is the initial vertical velocity (which is also 0), t is the time of flight, and a is the acceleration due to gravity.

To find the time of flight, we can use the horizontal motion of the dart, which is described by the equation:

x = x0 + v0t + 0.5at^2

where x is the horizontal position of the dart, x0 is the initial horizontal position (which is 0), v0 is the initial horizontal velocity (which is 12 m/s), and t is the time of flight.

We know that the horizontal position of the dart is 2.7 m, so we can substitute that into the equation and solve for t:

2.7 = 0 + 12t

t = 2.7/12 = 0.225 seconds

We can then substitute t and a into the vertical motion equation to find the vertical position of the dart:

y = 0 + 0 + 0.5(9.8)(0.225^2)

y = -0.061 m

So the dart hits 0.061 m below the intended target.

To determine the distance the dart falls below the intended target, we need to use the equations of motion for projectile motion. The vertical motion is affected by gravity and can be described by the equation:

y = vi_y * t + 1/2 * a * t^2

where
vi_y = initial vertical velocity (0 m/s, since the dart is thrown horizontally)
a = acceleration due to gravity (9.8 m/s^2, downward)
t = time of flight (can be calculated using the horizontal motion)

The horizontal motion is not affected by gravity and can be described by the equation:

x = vi_x * t

where
vi_x = initial horizontal velocity (12 m/s, given)

We know that the horizontal distance the dart travels is 2.7 m, so we can use the equation above to calculate the time of flight:

2.7 m = 12 m/s * t
t = 2.7/12 s = 0.225 s

Then we can substitute this value of t into the equation for vertical motion to calculate the distance the dart falls below the intended target:

y = 0 + 1/2 * 9.8 m/s^2 * (0.225 s)^2
y = 0.038 m

So the dart falls 0.038 m below the intended target.

You measure three segments of the distance between a diffraction slit an the screen on which the pattern forms: x1 = (11.0 - 0.2) cm, x2 = (6.2 +0.4) cm, and x3 = (16.3 + 0.2). What is the uncertainty of the total distance x1 + x2 + x3? 0.5 cm O 0.7 cm 0.8 cm 0.9 cm O 0.6 cm

Answers

The uncertainty of the total distance is 0.8 cm. It applies to physical measurements that have previously been performed, to the unknown, and to projections of future events.

What causes measurement uncertainty?

No matter how precise or accurate a measurement is, there is some degree of uncertainty. This is due to two things: the measurement tool's limitations (systematic error) and the experimenter's measurement expertise (random error).

How do you determine a measurement's level of uncertainty?

The uncertainty of a measurement is often calculated by taking one-half the unit of the last decimal point in the measurement.

What significance does measurement uncertainty have?

For risk analysis and decision-making, the capacity to measure uncertainty is crucial. Businesses make decisions every day using reports with information from quantitative measurements. Inaccurate measuring data raise decision-risks. The wrong supplier selection may result in subpar product quality.

Given:

x1 = (11.0 - 0.2) cm

x2 = (6.2 +0.4) cm

x3 = (16.3 + 0.2)

Uncertainty of the total distance x1 + x2 + x3 = 0.2+0.4+0.2

Uncertainty of the total distance x1 + x2 + x3 = 0.8

To know more about uncertainty visit;

https://brainly.com/question/13436423

#SPJ4

The driver of a 1.00 x 10^3 kg car traveling on the interstate at 35.0 m/s (nearly 80.0 mph) slams on his brakes to avoid hitting a second vehicle in front of him, which had come to rest because of congestion ahead. After the brakes are applied, a constant kinetic friction force of magnitude 8.00 x 10^3 N acts on the car. Ignore air resistance.At what minimum distance should the brakes be applied to avoid a collision with the other vehicle?

Answers

76.56 m minimum distance should the brakes be applied to avoid a collision with the other vehicle. This can be solved using the concept of work-energy theorem.

What is work-energy theorem?

The net work performed by forces acting on an object equals the change in kinetic energy, according to the work-energy theorem.

The Work-Energy theorem is used in that it is highly helpful in assessing scenarios where a stiff body should move under several forces. Due to its rigid structure, a rigid body can only have kinetic energy and cannot store potential energy in its lattice. The work-energy theorem may be able to offer some insight into the forces when an object's motion is known but the magnitudes of one or more of the forces acting on it are unknown. The work-energy theorem is valid both for constant and variable forces.

Given that,

mass (m) = 1.00 x 10³ kg

velocity(v) = 35.0 m/s

force (f) = 8000 N

As we know from work-energy theorem,

Δk = w

⇒ 1/2 mv² = f × d

⇒ d = mv² / (f × 2)

⇒ d = [1.00 x 10³ kg × (35.0 m/s)²] / (8000 N × 2)

⇒ d = 76.56 m

76.56 m minimum distance should the brakes be applied to avoid a collision with the other vehicle.

To know more about work-energy theorem refer to:

https://brainly.com/question/22236101

#SPJ4

a 561-g ball is thrown at a speed of 34.2 m/s from the top of a 42.7-m high cliff. determine the impact speed of the ball when it strikes the ground. assume negligible air resistance.

Answers

The impact speed of the ball when it strikes the ground is 28.94 m/s.  The ball is thrown at a speed of 34.2 m/s from the top of a 42.7-m high cliff.

Which equation entails conservation?

The concept of linear momentum balancing is expressed by the momentum conservation equation. The Cauchy momentum equation and Cauchy's first law of motion are other names for this conservation equation.

What is the speed of impact?

An object's impact velocity is the speed at which it strikes another object or the ground.

The impact speed of the ball,

[tex]v=\sqrt{2gh}[/tex]

Where,

v = impact speed (m/s)

g = acceleration due to gravity (9.81 m/s^2)

h = height of the cliff (42.7 m)

[tex]v=\sqrt{2*9.81*42.7}[/tex]

[tex]v=\sqrt{837.774}[/tex]

[tex]v=28.94 m/s[/tex]

To know more about impact speed visit:

https://brainly.com/question/14592345

#SPJ4

llustrate how energy is lost through an ecosystem at each trophic level (give 3 reasons), and explain the 10% rule.

Answers

90% of energy may be lost as heat (emitted during respiration), through motion, or in foods that people cannot digest at trophic level.

Energy is lost as metabolic heat when animals from one trophic level are ingested by species from the next level, hence energy diminishes as it goes up the food chain. Energy transmission between trophic levels is quantified by trophic level transfer efficiency (TLTE). The next trophic level's access to energy is determined by the 10% rule. 10% of the energy that is transferred between trophic levels becomes available for the following level. (The shift from the sun to producers is the exception; in this scenario, just 1% of the energy is maintained.)

Learn more about Trophic Level

brainly.com/question/30002141

#SPJ4

uppose that a slice of pizza at a temperature of 80 degrees has been placed inside a freezer, where the temperature is 2 degrees. if the pizza cools to 45 degrees in 1 hour, then its temperature after t hours is given by the equation:

Answers

The temperature after t hours is given by the equation  T(t) is 2 + 78e-0.5955t

What is  the temperature after t hours is given by the equation?

That a piece of pizza that was 80 degrees at the time was put inside a freezer that was 2 degrees at the time. if the pizza cools to 45 degrees in 1 hour, then its temperature after t hours is given by the equation: dT/dt = k(T - 2

Put the variables apart: [1/(T-2)]

dT = kdt

Integrate the two sides as follows: ln l T-2 l = kt + C

ekt + C = l T - 2 l

T - 2 equals eCekt

To obtain T(t) = 2 + Cekt = temperature in t hours, rename eC to C.

2 + Cek(0) = 80 since T(0) = 80.

C = 78

T(t) = 2 + 78ekt

T(1) = 45, therefore 2 + 78ek = 45

78ek = 43

ek = 0.5512821

k = ln(0.5512821) = -0.5955

T(t) = 2 + 78e-0.5955t

To learn more about temperature refer to:

https://brainly.com/question/26866637

#SPJ4

a cyclist rides 6.99 km east, then 11.88 km in a direction 39.84 degrees west of north, then 7.43 km west.A. What is the magnitude of the total displacement, in km?B. What is the direction of the displacement, measured in degrees west of north?

Answers

The magnitude of the total displacement, in km, is 25.3 km, and  the direction of the displacement, measured in degrees west of north, is 125.76 degrees.

A. The magnitude of the total displacement, in km, is 25.3 km. This is calculated by using the Pythagorean theorem, where a2 + b2 = c2. The first two legs of the displacement are a and b, where a = 6.99 and b = 11.88. So,

a2 + b2 = 6.992 + 11.882

= 162.42 + 140.24 = 302.66.

The square root of 302.66 is 17.36. The third leg of the displacement is c, where c = 7.43. So, the total displacement is 17.36 + 7.43 = 24.79 km. Rounding to the nearest tenth, the magnitude of the total displacement is 25.3 km.

B. The direction of the displacement, measured in degrees west of north, is 125.76 degrees. This is calculated by using the Law of Cosines, where c2 = a2 + b2 - 2ab cos(C). The sides of the triangle are a = 6.99, b = 11.88, and c = 7.43. The angle C is the direction of the displacement, so we can solve for C in terms of a, b

Learn more about displacement:

https://brainly.com/question/28370322

#SPJ4

Other Questions
The "Song of Solomon" is also known as "The song of songs." True false At a restaurant, hot chocolate can be purchased in two different cup sizes. A 12-ounce cup costs $3.60 and a 16-ounce cup costs $4.80.Is the linear relationship between cup size and cost also proportional? Why or why not? Yes, the constant of proportionality is 0.3. Yes, there is no constant of proportionality. No, the constant of proportionality is 0.3. No, there is no constant of proportionality. a construction company recognizes revenue at a point in time. which of the following is not one of the criteria for recognizing revenue at a point in time? a the legal title for the asset is with the customer annin laboratories uses the weighted-average method to account for its work-in-process inventories. the accounting records show the following information for february: beginning wip inventory direct materials$ 20,553 conversion costs6,805 current period costs direct materials225,147 conversion costs117,460 quantity information is obtained from the manufacturing records and includes the following: beginning inventory6,000units(40% complete as to materials, 15% complete as to conversion) current period units started44,000units ending inventory11,000units(75% complete as to materials, 35% complete as to conversion) required: compute the equivalent units for the materials and conversion cost calculations. compute the cost per equivalent unit for direct materials and conversion costs. mr. starnes and his wife have 6 grandchildren: connor, declan, lucas, piper, sedona, and zayne. they have 2 extra tickets to a holiday show, and will randomly select which 2 grandkids get to see the show with them. Given a list of integers, count how many distinct numbers it has. This task can be solved in a single line. ( Python please.)Example 1: input: [1, 2, 3, 2, 1]output: 3 A quare play area ha an area of 81 q ft. Lyla want to put fencing around to keep the dog out. How many feet of fencing will he need? How many gametes will be affected if nondisjunction happens?. Particles q1 = -66.3 UC, q2 = +108 uC, and 93 = -43.2 uC are in a line. Particles q1 and q2 are separated by 0.550 m and particles q2 and q3 are separated by 0.550 m. What is the net force on particle q2? You are signing a story that takes place in the late 1800s. How might you indicate the setting to your audience?. A circle of radius 3cm has the center at (-2, 3) . Find the equation of the circle in the form of x2+y2+Px+qy+c=0 8. Please helpBelow are the results forfinding the solution to asystem of equations. Statehow many solutions thedifferent results yield andexplain why.X = -5y = 2 Andys total bill for lunch is 20 dollars the cot of the drink is 15 % of the total bill and the rest is the cost of the food .what percent of the total bill did Andys food cost ?what was the cost of the food? Narrative is another word for story. Which of the following are aspects of a data-storytelling narrative? Select all that apply.1. It has a beginning, a middle, and an end2. It clearly explains important insights from the analysis3. It connects the data to the project objective4. It includes all of the specific steps taken to collect and analyze the data What does it mean when an observational study is prospective?- A prospective study requires that individuals took hack in time or require the researcher to look at existing records - A prospective study collects the data over time.- A prospective study is a list of all individuals in a population along with certain characteristics of each individual. f) Find the area of one small triangle Given the functions f(x) = 4x2 - 1, g(x) = x2 - 8x + 5, and h(x) = -3x2 - 12x + 1, rank them from least to greatest based on their axis of symmetry. (2 points) 1. A chemist needs to prepare 4.00 L of a 0.50 M solution of potassium permanganate (KMnO4). What mass of KMnO4 does she need to make the solution? 2. Determine the molality of a solution prepared by dissolving 20 g of sodium chloride (NaCl) in 150. g of water. This problem is similar to Sample Problem 16.5. identify whether each of the following variables is a nominal, ordinal, discrete, or continuous variable. 3100 dollars is placed in an account with an annual interest rate of 7.25%. To thehow long will it take for the account value to reach 25300 dollars?nearest year,