A rotating platform with a radius of 2.0 m makes one complete turn every 3.0 s. The angular velocity of the platform is most nearly A 2.1 rad/s B 1.5 rad/s C 1.0 rad/s D 0.70 rad/s E 0.30 rad/s

Because of freefall, The only acceleration working on the ball is gravity in the parabolic path shown. Thus, Option C is correct.

Parabolic motion is a type of projectile motion in which an object is thrown or projected into the air and follows a curved path due to the influence of gravity.

In the case of the diagram, the ball is thrown upwards and follows a parabolic path. Point Q marks the highest point on the path and points P and R are the same height above the ground. This can be explained by the fact that the initial velocity of the ball is insufficient to reach a higher point than Q, so after reaching Q the ball begins to fall back to the ground, travelling the same distance at P and R before it reaches the ground.

The parabolic motion of the ball can be described by the equation s = u ×t + 0.5 × a × t2, where s is the displacement of the ball, u is the initial velocity, t is the time elapsed, and a is the acceleration due to gravity. This equation can also be used to calculate the maximum height that the ball will reach, in this case point Q.

The parabolic motion of the ball can be used to explain the physics behind a variety of scenarios, such as how a ball thrown into the air will move, how a skydiver will fall, and even how a spacecraft can be propelled into outer space. It is a fundamental concept in physics and understanding it can help to explain many of the phenomena we observe in our everyday lives.

To know more about parabolic path click-

brainly.com/question/28687429

#SPJ4

Full question:

(See attachment))

Tesla is constructing a vehicle battery facility in Nevada to significantly enhance its current production capability. Since the facility has not yet begun operations, Tesla is expanding its manufacturing potential.

All the electrical parts of your automobile are powered by a surge of electricity from the car battery. We're talking about a sizable duty here. Your car won't start without a battery, as you may have discovered.

Let's see how that potent tiny box functions:

Your automobile is started by a chemical reaction: Your battery delivers voltage to the starter, converting chemical energy into the electrical energy required to operate your automobile.

Consistently maintain the electric current: In addition to supplying the power needed to start your automobile, your battery also maintains a stable voltage, which is what is needed to keep your engine running. On the battery, a lot depends. Think of it as the "small box that could."

Learn more about Battery here:

https://brainly.com/question/28146138

#SPJ4

When we move the magnet back and forth inside the coil of the wire,  it will produce a voltage.

When a magnet moves into a coil of wire, the magnetic field and flux through the coil change, creating a voltage in the coil according to Faraday's Law. In the example shown below, as the magnet moves into the coil, the galvanometer deflects to the left in response to the increasing magnetic field. When a magnet or coil repeats the reciprocating motion, alternating current is generated. Generators and transformers use electromagnetic induction to generate electricity and change the voltage of current. When the magnet is moved towards the coil, a current is induced in the coil due to the phenomenon of electromagnetic induction. The relative motion between the magnet and coil induces an electromotive force (EMF), which induces a current in the coil.

Learn more about the magnets in

https://brainly.com/question/2841288

#SPJ4

The height(in m) she has raised herself as she crosses the bar with initial speed of 8.7m/s is found to be 3.76m

A fundamental law of physics and chemistry asserts that despite internal changes, the overall energy of an isolated system remains unchanged. It is the fundamental premise of the first law of thermodynamics, which is most frequently stated as "energy cannot be created or destroyed."

Mass of the women => 60Kg

V1 => 8.7 m/s

v2=> 1.4m/s

Conservation of energy:

Kinetic energy 1 = Kinetic energy 2 + Potential energy

1/2 m v1^2 = 1/2 m V2^2 + mgh

V1^2 -v2^2/2 xg => h => height she raised

h=> 3.76m

There are three essential quantities in mechanics which are conserved. They are power, forward motion, and angular momentum.

Learn more about speed here:

brainly.com/question/8618202

#SPJ4

Pressure in a liquid with constant density is given by the equations: p 0 = g h p = p 0 + g h. Consequently, pressure on the fluid at a depth. pressure difference = 5886 pa  Area=5886*0.050 = 294 N

The power per unit area is measured by fluid pressure. Altitude, velocity, or pressures in a confined container can all result in fluid pressure. A liquid has no fixed shape, hence its pressure is uniform throughout.

14)

: Pressure= force area

Force is weight of liquid = mass * gr

Area = A

O pressure = pgh

Step: 3

calculated above pressure P =pg P = pg(h₂ - h₁)

1,000 × 9.81 × (0.8 -0.2)

= 5,886.00

Pressure difference = 5886 pa

Similar to the air on the inside of a tire, all liquids exert pressure. Fluid particles constantly and randomly move in all directions. The particles continue to collide with one another and with anything else in their path as they proceed.the pressure difference corresponds to pressure boy puts on platform which is equal to boy's weight divided by area.

Weight = pressure * Area

=5886*0.050 = 294 N

To know more about particles visit:

https://brainly.com/question/18750504

#SPJ4

Velocity = distance / time  = 300m / 100s

            = 3 m/s

Velocity is the direction at which an object is moving and serves as a measure of the rate at which its position is changing as seen from a specific point of view and as measured by a specific unit of time (for example, 60 km/h northbound).

A physical vector quantity called velocity must have both a magnitude and a direction in order to be defined.

Speed is the scalar absolute value (magnitude) of velocity; it is a coherent derived unit whose quantity is measured in metres per second (m/s or m/s1) in the SI (metric system).

Therefore, Velocity = distance / time  = 300m / 100s

            = 3 m/s

To learn more about Velocity, refer to the link:

https://brainly.com/question/28738284

#SPJ1

Total mechanical energy of the Earth-Moon system=[tex]-\frac{GM_{e} M_{m}}{2R}[/tex]

Keeping in mind Kepler's first law, the planets orbit the Sun in elliptical fashion. This implies that as a planet orbits the Sun, the separation between the centres of masses, r, will change. As r varies, this causes a change in the planet's gravitational potential energy.The system's overall mechanical energy is crucially stable throughout its orbit. A planet's gravitational potential energy will drop as it orbits in a position close to the Sun, but its velocity and kinetic energy will grow. The system's overall mechanical energy is always constant because the increase in kinetic energy balances off the system's loss in gravitational potential energy.

Total potential energy of earth and moon=[tex]-\frac{GM_{e} M_{m}}{R}[/tex]

Velocity of moon=[tex]\sqrt\frac{GM_{e} }{R}[/tex]

Kinetic energy of moon=[tex]\frac{1}{2} M_{m} v^{2}[/tex]=[tex]\frac{1}{2} \frac{GM_{e} M_{m}}{R}[/tex]

Learn more about mechanical energy

brainly.com/question/16916593

#SPJ4

The charge deposited in the lower left quadrant will experience an electric force of 98.32 psi. Additionally, the direction is 74.49.

The size of an object is its magnitude. For example, a car moves faster than like a bike in regards to speed. In this instance, the speed differential between both the car and also the bike is higher. It exposes the size or motion of an object in terms of absolute or relative dimensions.

A quantity with both a path and a quantity is called a vector. An abundance or a numerical amount of something is referred to as a magnitude. Another vector is displacement amount, which is the separation between a beginning point and an ending location.

To know more about Magnitude visit:

https://brainly.com/question/28173919

#SPJ4

Answer:

The Moon appears to be bright from Earth because it reflects sunlight and the sunlight is reflected back to Earth, making it visible to us. However, when viewed from space, the Moon appears dark because it does not emit its own light and the sunlight is not reflected back towards the observer in space.

Distance of moon from the earth will be around 384,400 Kilometers (239,000 miles) .

The angular size of the Moon in the sky, which is around half a degree, can be used to determine the distance to the Moon. With this knowledge and knowledge that the Moon's diameter is approximately 3,476 kilometers, we can apply the following formula to determine the angular size: Distance equals (Angular size / 2) tan((Moon diameter / 2)). This gives us a measurement of 384,400 kilometers (239,000 miles) as the distance between Earth and the Moon.

It's crucial to keep in mind that this is only an estimate, and the distance could change based on where the Moon is in its orbit around the Earth. It's also important to note that this distance is an average and that it varies over the month as a result of the Moon's eccentric orbit.

Learn more about Friction here

https://brainly.com/question/13000653

#SPJ4

If we consider the coffee to be the system, the mug, the air in the room, and the table underneath the mug are the part of the surroundings.

Heat is the transfer of kinetic energy from an energy source to a medium or an object, or the opposite. The three potential mechanisms for this energy transfer are radiation, conduction, and convection.

Small particles are always moving in gases, liquids, and solids. A type of energy known as thermal energy is created by the motion of particles and is a part of all matter.

Between systems or objects with various temperatures, energy is transferred in the form of heat (flowing from the high-temperature system to the low-temperature system). Likewise called thermal energy or heat energy.

To know more about heat visit:

https://brainly.com/question/8348313

#SPJ4

By allowing the lamina to swing freely, the object's true weight distribution and the center of gravity can be observed and determined with greater accuracy.

The lamina (such as a flat plate or sheet) must be able to swing freely when determining the center of gravity (also known as the center of mass) for a few reasons:

First, the center of gravity is the point at which the weight of an object is evenly distributed, and the object will be balanced when suspended from that point. In order to determine the center of gravity, the object must be allowed to rotate or move freely, so that its weight distribution can be observed.

Second, if the lamina is not able to swing freely, it would be affected by external forces such as friction or air resistance, which could influence the object's weight distribution and give an inaccurate location of the center of gravity.

Third, if the lamina is not able to swing freely, it would be difficult to observe the object's movement, and therefore it would be difficult to determine the center of gravity.

learn more about  center of gravity here:

https://brainly.com/question/17409320

The initial height of a 2.75-kg baseball that was thrown at velocity of 7.9 m/s 21.725.

To emphasise the relief-like structure in a processed representation, the object's initial height representation is treated utilising height alterations.

h = v 0 y 2 2 g . h = v 0 y 2 2 g . This equation, which solely depends on the vertical component of the starting velocity, specifies the maximum height of a projectile above its launch site.

The formula is expressed as v 2 u 2 =2as, where v is the final velocity, u is the beginning velocity, an is the acceleration due to gravity, 9 m/s 2 and s = h is the height travelled.

The information above allows us to locate you. At the top of the journey in this instance, v equals 0.

2.75 * 7.9 m/s . = 21.725.

Consequently, the ball's starting speed was 10 m/s.

To learn more about initial height refer to:

https://brainly.com/question/12446886

#SPJ1

Removing heat will lower the temperature, causing the particles of the reactants to slow down, resulting in less frequent collisions.

The temperature of a system is a measure of the average kinetic energy of the particles that make up the system. As the temperature decreases, the kinetic energy of the particles decreases, and their movement slows down. In a chemical reaction, the reactant particles collide with each other in order to react. The more frequently and forcefully they collide, the more likely they are to react. So if the temperature is lowered, the rate of the chemical reaction will decrease because there will be fewer successful collisions between the reactant particles.

To know more about collisions visit:

https://brainly.com/question/29308013

#SPJ4

9 gallons of fuel can be drained to bring the aircraft's weight and CG into safe ranges for takeoff.

The maximum weight at which the pilot is permitted to attempt to take off due to structural or other limitations is known as the maximum takeoff weight, maximum gross takeoff weight, or maximum takeoff mass of an aircraft. Gross lift-off mass, or GLOW, is the equivalent phrase for rockets. The maximum weight of a vehicle or trailer, including the maximum load that can be carried while being used on the road, is referred to as the maximum authorised mass (MAM) in the context of driving licenses. This is also referred to as the maximum weight permitted or the gross vehicle weight (GVW).

Here,

The aircraft's weight can be adjusted to its maximum gross weight and its CG can be kept within safe ranges for takeoff by draining 9 gallons of fuel.

To know more about maximum gross weight,

https://brainly.com/question/13973823

#SPJ4

The gravitational force is the predominant force in the following circumstances:

1. When the moon orbits the Earth

2. When an asteroid orbits the Sun

Any two mass-containing objects are attracted each other by the invisible gravitational force. It is the weakest of the four fundamental forces of nature and is responsible for the orbits of planets around the Sun as well as the motion of galaxies. This force is inversely proportional to the square of the distance between the two objects, and it is proportional to the product of their masses. Isaac Newton was the first to describe gravity mathematically and proposed that it was a universal force. This force is responsible for keeping objects on the ground, and it is what causes objects to fall when they are dropped.

To learn more about gravitational force
https://brainly.com/question/27943482
#SPJ4

A simple machine is a device that uses a single applied force to do work against a single load force. Simple machines do not involve the use of electricity or combustion, and are typically used to amplify or change the direction of applied forces.

The six types of simple machines are:

Lever: A bar that pivots around a fixed point, or fulcrum, to amplify or change the direction of applied forces.

Pulley: A grooved wheel with a rope or cable passing over it, used to change the direction of an applied force.

Inclined Plane: A flat surface that is angled, used to reduce the amount of force needed to lift an object.

Wedge: A triangular shape with one sloping side, used to split or lift objects by applying force at the sloping angle.

Screw: A spiral groove that helps convert rotational motion into linear motion.

Wheel and Axle: A cylinder that rotates around a central point (the axle), used to reduce the amount of force needed to move an object.

A fundamental particle with no electric charge and a spin of one-half is called an electron neutrino (v).

The subatomic particle known as a neutrino resembles an electron in many ways, but it differs in that it lacks an electrical charge and has a very small mass that may even be zero. One of the cosmological particles with the highest density is the neutrino. However, they are exceedingly difficult to find because they barely interact with matter.

Small, almost massless particles known as neutrinos move at speeds close to light. They are phenomenally common in the universe and can move through lead as readily as we do through air. They are the product of intense astronomical events like exploding stars and gamma ray bursts.

A flat recoil energy spectrum is the result of monoenergetic electron neutrinos scattering from electrons.

To learn more electron neutrino refer to:

https://brainly.com/question/518346

#SPJ1

each leg's strength With forces of Fab = 2.52 KN, Fcb = 2.52 KN, and Fbd = 3.64 KN, the shear leg derrick is used to raise the 200 kg fish net onto the pier. Do the compression force along each leg calculations.

(db), (ab), and (cb) of the winch cable. In physics, a force is an effect that has the ability to change how an object moves. A mass-containing object's velocity or acceleration can be altered by a force (for example, moving from a condition of rest).

If 0.6667Fab + 0.6667Fcb - 0.9231Fbd = 0, then 0.6667 Fab + 0.6667Fcb - 0.3846 Fbd - 1962 = likewise.

By resolving these three equations, we arrive to the values Fab = 2.52KN, Fcb = 2.52KN, and Fbd = 3.64KN.

Learn more about force here

https://brainly.com/question/13191643

#SPJ4

The following quantity is at maximum when an object in simple harmonic motion is at its maximum displacement : B) Acceleration. Hence, B) Acceleration is the correct answer.

In physics, simple harmonic motion is a repetitive movement back and forth through an equilibrium, or central position, so that the maximum displacement on one side of this position is equal to the maximum displacement on other side.

Simple harmonic motion is defined as periodic motion of a point along  straight line, such that acceleration is always towards a fixed point in that line and is proportional to the distance from that point.

To know more about simple harmonic motion, refer

https://brainly.com/question/20885248

#SPJ4

If you have a mass of 50 kg and are on a planet where the acceleration of gravity is 5 m/s^2, your weight on the planet would be 250 N (Newtons)

Weight is the force exerted on an object due to gravity and is equal to the mass of an object multiplied by the acceleration due to gravity.

Weight = mass*gravity

The acceleration due to gravity on this planet = 5[tex]m/s^2[/tex]

The weight of the object with a mass of 50 kg = 50 kg ×5[tex]m/s^2[/tex] = 250 N.

Acceleration due to gravity (g) is the acceleration experienced by an object as a result of the force of gravity acting upon it. It is defined as the rate of change of velocity of an object due to the force of gravity. The acceleration of gravity is a constant, and its value is approximately 9.8 [tex]m/s^2[/tex] on the surface of the Earth.

Learn more about acceleration due to gravity here:

https://brainly.com/question/13860566

Net force on left charge due to other 2 is -39.41N,Force on charge 2 due to 1 is 192N,Force on charge 3 due to 1 is -152.6N.

What in science is a force?

The word "force" has a specific meaning in science. At this level, calling a force a push or perhaps a pull is entirely appropriate. A strength is not really something an object "has in it" or that it "contains." One thing experiences a force from another. There are both living things and non-living objects in the concept of a force.

What are example and force?

Force is the term used to describe a body's tendency to incorporate the new its state as a result of an external cause. When force is applied, the item can also alter its size, shape, and direction. kicking a ball, pushing and pulling on the door, or kneading dough are a few examples.

To know more about force visit:

https://brainly.com/question/13191643

#SPJ4

Net force on left charge due to other two charges is -39.41N, force on charge two due to one is 192N, and force on charge three due to one is -152.6N.

What exactly is a force?

Force is an external influence that changes or has the potential to change the motion of an object. Force can be either a push or a pull, and can be measured in newtons. It can be caused by interactions between objects, or the result of an object’s interaction with a field, such as gravity. Force can cause a change in an object’s speed, direction, shape, and/or energy. Examples of forces include friction, tension, gravity, magnetism, and electrical forces. Force can also be thought of as the product of mass and acceleration. In order for an object to move, a force must act upon it.

To know more about force visit:

brainly.com/question/13191643

#SPJ4

Time when the power delivered to the circuit element is maximum is        [tex]t = ln(80,000f0/75) / (-5)[/tex]), B) The maximum value of power [tex]12f0 A[/tex],C)The total energy delivered to the circuit element is [tex]E = ∫ P dt = ∫ (80,000f0 x 15te^-5t) dt = 12f0 x (1/e^5) x (1-e^-5t)[/tex]

What is the total energy and maximum value of power delivered to the circuit?

a) To find the time when the power delivered to the circuit element is maximum, we need to find the time when the product of voltage and current is maximum.

Power = voltage x current = [tex]80,000f0 x 15te^-5t A[/tex]

The power will be maximum when the derivative of Power with respect to time is zero.

[tex]dP/dt = 0 = 80,000f0 x 15e^-5t - 75e^-5t A[/tex]

[tex]t = ln(80,000f0/75) / (-5)[/tex]

b) To find the maximum value of power, we can substitute the value of t in the equation of power.

[tex]P = 80,000f0 x 15e^-5(ln(80,000f0/75) / (-5)) A = 12f0 A[/tex]

c) To find the total energy delivered to the circuit element, we can integrate the power with respect to time.

[tex]E = ∫ P dt = ∫ (80,000f0 x 15te^-5t) dt = 12f0 x (1/e^5) x (1-e^-5t)[/tex]

The total energy delivered to the circuit element is[tex]12f0/e^5[/tex]

It's worth noting that this solution assumes that the circuit element is a linear element that follows Ohm's law and Kirchhoff's laws. If the circuit element is nonlinear this solution may not be valid.

To learn more about voltage refer:

https://brainly.com/question/13521443

#SPJ4

Charged particles accelerate in an electric field. Electrons begin with a velocity that increases as they approach the anode from the cathode through the vacuum.

Cathodes come from cations (positively charged ions) and anodes come from anions (negatively charged ions). In devices that use electricity, the cathode is the negatively charged electrode. Thomson showed that cathode rays consist of hitherto unknown negatively charged particles (later called electrons). To display images on a screen, a cathode ray tube (CRT) uses a focused electron beam that is deflected by an electric or magnetic field. An anode is a negative or reducing electrode that donates electrons to an external circuit and oxidizes during an electrochemical reaction. A cathode is a positive or oxidizing electrode that receives electrons from an external circuit and is reduced during an electrochemical reaction.

Learn more about the cathode in

https://brainly.com/question/4052514

#SPJ4

An object's resistance to changes in motion is measured by inertia. An object's inertia increases with its mass.

To learn more about inertia refer:

brainly.com/question/1140505

#SPJ4

In order to arrange the inertia of the four objects shown from least to greatest, we must first determine the mass of each object.

Object A has a velocity of 10 m/s and a mass of 5 kg.

Object B has a velocity of 15 m/s and a mass of 10 kg.

Object C has a velocity of 20 m/s and a mass of 20 kg.

Object D has a velocity of 25 m/s and a mass of 15 kg.

From the information provided, we can see that the masses of the objects are:

Object A: 5 kg

Object B: 10 kg

Object C: 20 kg

Object D: 15 kg

Therefore, the inertia of the objects arranged from least to greatest is:

Object A: 5 kg

Object D: 15 kg

Object B: 10 kg

Object C: 20 kg

Inertia is directly proportional to the mass of an object, so the more massive an object is, the greater its inertia.

A body's inherent property of inertia makes it resistant to any force that would alter its motion. Acceleration could be caused by opposing forces acting on a still and moving body.

Motion inertia: The fundamental property that a body has to resist any change in its motion is called inertia of motion. In other words, inertia of motion is when the body doesn't want to change its motion but wants to stay in its current state.

Inertia refers to a body's ability to remain stationary or in motion at a constant speed. The "law of inertia" is a common name for Newton's first law.

The velocities and masses of four objects are shown. Which object has the greatest inertia?

A   5kg   v=2m/s

B  3 kg      v=3m/s

C  4kg → v=1m/s

D 10 kg  v=0m/s

Learn more about inertia:

brainly.com/question/1140505

#SPJ4

Answer:

10

if we calculate using the quantity of the moon you see that he was in Paris

From given statements for cycle of the cosine wave, the false statement is [tex]$ \mathrm{cos\frac{\pi}{6} = cos\frac{7\pi}{6} }[/tex].

An amplitude is a measure of the strength or magnitude of a signal, such as an electrical voltage, sound wave, or light wave. It is typically measured in decibels (dB), which is a logarithmic scale. Amplitude is usually related to the intensity or volume of a signal.

This is because a single cycle of a cosine wave is a single period of the wave, and a single period of the wave is usually defined as the time between two consecutive peaks or two consecutive troughs. In this case, there are more than two consecutive peaks or troughs, so it cannot be said that a single cycle of the cosine wave is shown.

[tex]$ \mathrm{cos\frac{\pi}{6} = cos\frac{7\pi}{6} }[/tex] is a false statement as the variables can be factored out and we are left with 1 and 7

As

1 ≠ 7

[tex]$ \mathrm{cos\frac{\pi}{6} = cos\frac{7\pi}{6} }[/tex] is a false statement.

To know more about amplitude, visit

brainly.com/question/8662436

#SPJ4

Complete question:

It is due to problem in commutator or split rings that reverse the current in the coil by which the  energy armature completes its rotation.

Rotation describes the circular motion of an object around its center. There are different ways things can rotate. energy, in physics, the capacity for doing work. Rotation of the Earthre. A very familiar kind of rotation is when a spherical, three-dimensional object turns around an invisible line inside its center.

Rotational movement involves moving the bone around its longitudinal axis; energy in the process of transfer from one body to another.  this can be movement toward the midline of the body (medial rotation) or away from the midline of the body lateral rotation.

To know more about energy visit

https://brainly.com/question/1932868

#SPJ4

The weight of the combined system is 203 kg.

What is mean by density?

The density is the ratio of mass to volume. It is typically expressed as kilograms per cubic meter (kg/m3) and is used to quantify the physical properties of different materials.

Density is an important property as it affects the material’s ability to resist changes in pressure, temperature, and other physical forces.

It is also used to determine the composition of certain substances, such as the amount of salt in a solution.

Density is an intrinsic property of a material and is not affected by the size or shape of the sample being measured.

Density can be determined by measuring the mass of an object and dividing it by its volume. The density of a substance can be compared to that of other substances to determine relative densities.

Density is used in many areas of science such as physics, chemistry, engineering, and geology.

Density is also important to the study of materials, as it can be used to identify and characterize them. Density is an important parameter when considering the structural and mechanical properties of materials.

Step 1: Calculate the mass of water in the tank.

Mass of water = Volume of water x Density of water

Mass of water = 0.2m^3 x 1000 kg/m^3

Mass of water = 200 kg

Step 2: Calculate the weight of the combined system.

Weight of the combined system = Mass of tank + Mass of water

Weight of the combined system = 3 kg + 200 kg

Weight of the combined system = 203 kg

To learn more about density of water refer to:

brainly.com/question/28734050

#SPJ4

Both kinetic energy and momentum is conserved in this hit since it is perfectly elastic. Vf = mV + M0 = (m + M)v is the speed of the block/bullet system after the contact.

In physics, an elastic collision is a collision between two bodies in which the total kinetic energy remains constant. In an ideal, elastic collision, there is no net conversion of kinetic energy into heat, noise, or potential energy. In physics, kinetic energy (KE) is the energy that an object has as a result of its motion. Both kinetic energy and momentum are conserved in this hit since it is completely inelastic. Vf = mV + M0 = (m + M)v is the speed of the block/bullet system after the contact. It is defined as the effort necessary to move a mass-based body from rest to the given velocity. in kinematics and everyday usage.

Learn more about  kinetic energy here

https://brainly.com/question/26472013

#SPJ4