After moving down a group in the periodic table, the number of valence electrons

Answer:

There are several different types of tools you could encounter, including project management software, note-taking programs, journals, and day planners. Organization management tools help in sorting out one’s daily responsibilities and being more efficient with time: calendars, to-do lists, mind maps, document storage clouds.

Explanation:

what i know:) hope it helps

The hybridization state of the central sulfur atom is sp3d.

The valence shell electron pair repulsion theory describes the shape of molecules in terms of the number of electron pairs that surround the valence shell of the central atom in the molecule.

There are certain molecular shapes that are associated with certain hybridization states of the central atom. Since the central sulfur atom is trigonal bipyramidal, the hybridization state is sp3d.

Learn more: https://brainly.com/question/13978941

Answer: Metals are an excellent conductor of electricity and heat because the atoms in the metals form a matrix through which outer electrons can move freely.

Explanation:

The new temperature of the gas is 115 °C

From the question given above, the following data were obtained:

The new temperature of gas can be obtained as follow:

[tex] \frac{P_1}{T_1} = \frac{P_2}{T_2} \\ \\ \frac{0.96}{298} = \frac{1.25}{T_2} \\ \\ cross \: multiply \\ \\ T_2 \times 0.96 = 298 \times 1.25 \\ \\ divide \: both \: side \: by \: 0.96 \\ \\T_2 = \frac{298 \times 1.25 }{0.96} \\ \\ T_2 = 388 \: K \\ \\ subtract \: 273 \: from \: 388 \: to \: express \: the \: answer \: im \: \degree \: C \\ \\ T_2 = 388 - 273 \\ \\ T_2 = 115 \: \degree \: C [/tex]

Therefore, the new temperature is 115 °C

Learn more about gas laws: https://brainly.com/question/25862018

Answer:

Blank #1: Polyatomic

Blank #2: 2 (see explanation)

Blank #3: 1 (see explanation)

Explanation

Both the ammonium ion  and the sulfate ion  contain more than one atom in each ion. The two species are thus polyatomic. The chloride ion , for example, is monoatomic.

Superscripts above formulae of the ions indicate their charge. Each ammonium ion carries a positive one (+1) charge. Each sulfate ion carries a charge of negative two (-2).

Ammonium sulfate is an ionic compound. A sample of this compound contain myriads of ammonium ions and sulfate ions. The ions are packed in three-dimensional lattices. Thus unlike water, ammonium sulfate does not exist as molecules in nature.

Assuming that the second and third blanks refers to a formula unit, rather than a molecule, of ammonium sulfate. The empirical formula of ammonium sulfate gives the minimum whole-number ratio between the two ions in a sample.

Charges shall balance between the two ions. Ammonium ions are of charge +1. Sulfate ions are of charge -2. The sample shall thus contain two ammonium ions for every one sulfate ion.

The empirical formula of ammonium sulfate is therefore .

There are thus two ammonium ions  and one sulfate ion  in each formula unit of ammonium sulfate.

There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore,  a molecule of the ammonium sulfate consists of one NH₄⁺ ions and one SO₄²⁻ ions.

Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.

An ionic compound is a metal and nonmetal combined compound.  Ionic compound are very hard. They have high melting and boiling point because of strong ion bond. The compound of ammonium sulfate consists of two ions. NH₄⁺ and SO₄²⁻ both of which are polyatomic ions. A molecule of the ammonium sulfate consists of one NH₄⁺  ions and one SO₄²⁻ ions.

Therefore,  a molecule of the ammonium sulfate consists of one  NH₄⁺ ions and one SO₄²⁻ ions.

To learn more about chemical compound, here:

brainly.com/question/26487468

#SPJ2

Answer:

I think it's is because during osmosis because when the cell duplicates in osmosis it divides into two smaller daughter cells; in diffusion there is a higher concentration near where it is but its getting smaller particles from where the source is

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

As we know, Number of protons = Atomic Number

So,

And, Atomic mass = Number of protons + Number of Neutrons (N)

therefore ~

Number of Neutrons = 19

The compound that contains both sigma and pi bonds has been [tex]\rm \bold{H_2CO}[/tex]. Thus, option B is correct.

The compounds have been resulted by the sharing of the valence electrons between atoms, for the completion of octet of each elements.

The bonds can be saturated with the presence of only sigma bond. The unsaturated bonds has presence of pi bonds as well. The bond with one pi and one sigma has been a double bond, while 1 sigma and 2 pi has been a triple bond.

The bonds present in the following structures has been:

[tex]\rm HCCl_3=4\;\sigma\;bonds\\H_2CO=2\;\sigma,\;1\;\pi\;bond\\H_2S=2\;\sigma\;bonds\\HBr\;=1\;\sigma\;bond[/tex]

The compound with the presence of both sigma and pi bonds has been [tex]\rm \bold{H_2CO}[/tex]. Thus, option B is correct.

For more information about the sigma and pi bonds, refer to the link:

https://brainly.com/question/14018074

The designation "4" before Na2SO3 simply means that there are four molecules of sodium sulfite.

A molecule is formed when two or more atoms of the same or different elements come together. The formula of the molecule must reflect the number of atoms from which it is formed. The designation "4" before Na2SO3 simply means that there are four molecules of sodium sulfite.

The "The World on Turtle's Back" is a legend creation story. According to this story, the world was created on a giant turtle back. The folktale is common among the  Iroquois Native Americans.

Learn more: https://brainly.com/question/19922822

That is an ionic bond.

Explanation:

It has cations and anions

A. The abundance of the 2nd isotope is 48.119%

B. The mass of the 2nd isotope is 108.905 amu

Let the 1st isotope be A

Let the 2nd isotope be B

A. Determination of the abundance of the 2nd isotope

Abundance of isotope A = 51.881%.

Abundance of B = 100 – A

Abundance of B = 100 – 51.881

B. Determination of the mass of the 2nd isotope

Atomic mass of silver = 107.868 amu.

Mass of 1st isotope (A) = 106.906 amu

Abundance of isotope A (A%) = 51.881%.

Abundance of isotope B (B%) = 48.119%

[tex]atomic \: mass = \frac{mass \: of \:A \times \:A\%}{100} + \frac{mass \: of \:B \times \:B\%}{100} \\ \\ 107.868 = \frac{106.906\times \ \: 51.881}{100} + \frac{mass \: of \:B \times \:48.119}{100} \\ \\ 107.868 = \: 55.464 + 0.48119 \times mass \: of \:B \\ \\ collect \: like \: terms \\ \\ 0.48119 \times mass \: of \:B = 107.868 - 55.464 \\ \\ divide \: both \: side \: by \: 0.48119 \\ \\ mass \: of \:B = \frac{107.868 - 55.464 }{0.48119} \\ \\ mass \: of \:B =108.905 \: amu \\ \\ [/tex]

Therefore, the mass of the 2nd isotope is 108.905 amu

Learn more: https://brainly.com/question/7955048

Answer:

20

Explanation:

You need 4 times the amount of B, compared to a (there is a 3A:12B which reduces to 1:4), so 4 times 5 is 20.

Hope this helps!

The downside of this is that the longer lasting material is more difficult to break down.

Both natural fibers and synthetic fibers are polymer materials. Polymer materials are materials that are made by the agglomeration of small molecules called monomers.

The natural fibers are less long lasting than the synthetic fibers. The downside of this is that the longer lasting material is more difficult to break down. As a result of these, synthetic fibers lead to environmental pollution problems.

Learn more: https://brainly.com/question/25140263

Answer:

the longer lasting material is more difficult to break down.

Explanation:

Answer:

40

Explanation:

I'm not sure

Answer:

a) sodium oxide

b) potassium peroxide

c) Hydrogen chloride

d) form ammonia

e) Calcium nitride

Answer:

the 4 properties of waves are frequency, amplitude, wavelength, and speed.

Explanation:

The heat of combustion of the sample is calculated to be  -1300 kJmol-1.

We know that energy is neither created nor destroyed but is converted from one form to another. The heat lost by the ethanol when it is burnt is equal to the heat gained by the calorimeter.

Heat gained by calorimeter =  2.×10^3 g ×  2. 45 Jg-1°C-1 × 1. 33°C

= 6.5 kJ

Number of moles of ethanol =  0. 2301 g/46 g/mol = 0.005 moles

Heat of combustion of the sample = -( 6.5/0.005 moles) = -1300 kJmol-1

Learn more: https://brainly.com/question/17638582

What factors can influence the properties of glass, which include its ability to transmit, reflect, or absorb light, or to be transparent?

Answer · 47 votes

The properties can be influenced by many factors. The most common are the shape of the object, the lighting where the object is located, the environment (colors, shapes, density of other objects, etc.), and the viewing angle of the observer.

Explanation:

the equation is yes a the line of jointing line passing the ball to is

Answer:

It's because it has 2 electrons on its outer ring

Explanation:

It has a -2 ion due to it having 2 more electrons than protons making it an overall negative. It's well known in chemistry that the first ring can only hold 2 electrons while the second and furthermore can hold up to 8. But what happens when you have 9? a new ring starts and it would only contain 1 electron.. In our case here it has 2 more electrons than protons and those 2 electrons are located on the outer ring

Answer:

Power Plant = Mitochondria (Mitochondria is the powerhouse of the cell)

City Limits = Cell Membrane (Outer layer of a cell)

City Hall = Nucleus (The nucleus is the control center in a cell)

City Food Processing Plant (Chloroplast process the cells food)

City Plans = Chromosomes (They contain the genetic information about the cell)

Community = Cytoplasm (Mainly process of elimination)

Explanation:

Explanations are in parenthesis

The periodic table is composed of metals and nonmetals arranged in groups and periods.

The periodic table is an arrangement of elements in groups and periods based on their properties. The properties of elements repeat at regular intervals hence the term, "periodic".

The answers to the questions are;

7)  Element Families on the Periodic Table have similar properties. There are 18 families.

8) Alkali Metals are good conductors of heat and electricity.

9) There are a total of 38 elements that are grouped as Transition Metals.

10)  As opposed to metals, non-metals can be very opaque. They have no metallic luster and do not reflect light.

11)  All Lanthanide Series elements occur naturally except for promethium.

12)  All Actinide Series elements are radioactive and most are synthetic.

Learn more about the periodic table: https://brainly.com/question/24719506  

Plants and animals use glucose as a soluble, easily distributed form of chemical energy which can be 'burnt' in the cytoplasm and mitochondria to release carbon dioxide, water and energy. Pure monosaccharides, such as glucose, attract water.

An animal's body breaks down carbohydrates and converts them into simple sugar such as glucose. Glucose in the form of energy is carried through the blood and delivered to every cell of the body.

Carbohydrates are an important compound of all life on this planet. Both plants and animals utilize carbohydrates as a source of energy to keep their body functioning at the most basic level.

Carbohydrates fulfill needs by helping in the synthesizing of other chemicals and giving structure to cells within the body. Carbohydrates are carrying out normal functions such as growth, movement, and metabolism.

Carbohydrates store energy in the form of starch and provide either simple or complex sugars. Polysaccharides, give a steady supply of energy while sugars, monosaccharides, and disaccharides, supply quick energy on dissolving.

Carbohydrates have the side effect of helping with the processing of other body's chemicals. As carbohydrates break down, they release energy.

Learn more about carbohydrates, here:

https://brainly.com/question/14614055

#SPJ2

Answer:

4.58g

Explanation:

1.) What is the molar mass of CaCI2?

= 110.98 g/mol

2.) Find the mols

[tex]conc = \frac{mol}{volume(l)} [/tex]

conc × volume= mol

0.125 M x 0.33 L = 0.04125mol ( 330mL was converted to "L" by dividing 330 by 1000)

3.) The mass(g)

g= mol x atomic weight

g= 110.98g/mol × 0.04125

= 4.58 g

# NOTE M = mol/L

Hydrogen  bonding interaction occurs between  the oxygen atom of water and  the hydrogen atom of allyl alcohol that is covalently bonded to the oxygen atom.

We must recall that allyl alcohol is a molecular substance. Molecular substances do not dissociate into ions in water. As such particles of allyl alcohol remain intact when dissolved in water.

Hydrogen bonding occurs when hydrogen is bonded to an electronegative atom such as oxygen. In allyl alcohol, hydrogen  bonding interaction occurs between  the hydrogen atom of water and the oxygen atom of allyl alcohol.

Also,  hydrogen  bonding interaction occurs between  the oxygen atom of water and  the hydrogen atom of allyl alcohol that is covalently bonded to the oxygen atom.

Learn more: https://brainly.com/question/865531

Answer:

A

Explanation:

distance over time is speed's equation

Answer:

Extensive or inextinsive and either physical or chemical