Alma bought a laptop computer at a store that gave a 20 percent discount off its original price. The total amount she paid to the cashier was p dollars, including an 8 percent sales tax on the discounted price. Which of the following represents the original price of the computer in terms of p? A. 0.08p B. p/0.88 C. (0.8)(1.08)p D. p/(0.8)(1.08)

The formula is copied with cell references you must adjust to avoid worksheet errors.

Worksheet errors are mistakes made on a worksheet, such as incorrect calculations, incorrect formulas, or incorrect data entry. These errors can occur due to a variety of reasons, such as careless mistakes, lack of understanding of the worksheet, or misreading the instructions.

When you paste formula cells using the Paste button in the Clipboard group, the formula is copied with cell references which must be adjusted to avoid worksheet errors. The Paste Options button then lets you paste specific elements of the copied cells, the Auto Fill Options button does not appear, and pointing to the destination cell does not cause a preview of the cell contents to appear.

To learn more about worksheet errors
https://brainly.com/question/29980512
#SPJ4

To determine if an IP address is being blocked or if SSH traffic is being blocked, I would do the following:

Check the firewall settings on the computer or network. This can be done by accessing the router or firewall settings and looking for any rules that block specific IP addresses or traffic on specific ports (such as port 22 for SSH traffic).

Try to access the computer using the IP address from a different device or location. If the connection is refused or times out, it could be an indication that the IP address is being blocked.

Try to connect to the computer using SSH from a different device or location. If the connection is refused or times out, it could be an indication that SSH traffic is being blocked.

Check the system or application logs for any error messages or alerts related to blocked IP addresses or traffic.

To prevent a host from being allowed to access a system for SSH, I would do the following:

Configure the firewall to block incoming traffic on port 22 from the specific IP address or range of IP addresses.

Configure the SSH server to only accept connections from specific IP addresses or ranges of IP addresses.

Use an intrusion detection system (IDS) or intrusion prevention system (IPS) to monitor and block attempts to connect to the SSH server from unauthorized IP addresses or ranges of IP addresses.

Use access control lists (ACLs) to limit access to the SSH server to specific users or groups of users.

Use a combination of these methods for maximum security, such as using a firewall to block traffic from unauthorized IP addresses, and then using access controls to limit the users that can connect to the server once the traffic is allowed.

False. The text does not suggest that operating the technology correctly without assistance from end users is a test to determine whether a support analyst understands an existing technology well enough.

The text suggests that in a user needs assessment project, an analyst should investigate alternatives to the current technology, make a build-versus-buy decision, identify sources of information and understand the organizations goals. The analyst should also investigate successful technology in operation in other, similar organizations. It can also be used to refer to a higher level of authority or status. Synonyms for above include over, atop, overhead, upward, upwards, aloft, skyward, and sky. The opposite of above is below, under, beneath, and underneath. Writing a 100-word essay requires more finesse than writing a longer piece because you have limited space in which to fit your most important points. A quality outline can help you to make all of your most important points without going over word count.

Find out more about Technology

brainly.com/question/28271902

#SPJ4

The entire procedure is as follows: public static int divISum(int[] arr, int num) int sum equals zero; for(i int: arr) if sum+=i and i%num = 0; return amount;

The program assumes, as instructed, that arr has been declared and initialized. Therefore, this solution only completes the divISum method (it does not include the main method).

Programming is literally everywhere we look. Code makes our everyday activities possible, such as ordering takeout and streaming movies. Nowadays, tech companies aren't just software companies; instead, they deliver food to our doors, assist us in getting a taxi, influence presidential election outcomes, or act as personal trainers.

Only a few people have been able to code for a long time. However, that is beginning to shift. Estimates put the number of people learning to code at around 31.1 million worldwide, which does not even take into account the numerous other programming-related careers. Our goal at Codecademy is to make technical information understandable and useful. Despite the fact that programming is no longer just for software engineers, technology plays a crucial role in our economy.

The program assumes, as instructed, that arr has been declared and initialized. This line defines the method public static int divBySum(int[] arr, int num)

This line defines the method

public static int divBySum(int[] arr, int num){      

This line declares and initializes sum to 0

   int sum = 0;

This uses for each to iterate through the array elements

    for(int i:arr){

This checks if an array element is divisible by num (the second parameter)

       if(i%num == 0)

If yes, sum is updated

        sum+=i;

    }

This returns the calculated sum

    return sum;

The divBySum method is intended to return the sum of all the elements in the int array parameter arr that are divisible by the int parameter num. Consider the following examples, in which the array arr contains {4, 1, 3, 6, 2, 9}.

The call divBySum(arr, 3) will return 18, which is the sum of 3, 6, and 9, since those are the only integers in arr that are divisible by 3.

The call divBySum(arr, 5) will return 0, since none of the integers in arr are divisible by 5.

Complete the divBySum method using an enhanced for loop. Assume that arr is properly declared and initialized. The method must use an enhanced for loop to earn full credit.

/** Returns the sum of all integers in arr that are divisible by num

* Precondition: num > 0

*/

public static int divBySum(int[] arr, int num)

Learn more about program:

brainly.com/question/14277907

#SPJ4

Password is a secret combination of letters, numbers, and/or characters that only the user knows.

A password, also known as a passcode (for example, in Apple devices), is secret data that is typically a string of characters and is used to confirm a user's identity. Passwords were traditionally expected to be memorised, but the large number of password-protected services that a typical individual accesses can make remembering unique passwords for each service impractical. The secret is held by a party called the claimant, and the party verifying the claimant's identity is called the verifier, according to the terminology of the NIST Digital Identity Guidelines. When the claimant successfully demonstrates password knowledge to the verifier via an established authentication protocol, the verifier is able to deduce the claimant's identity.

In general, a password is an arbitrary string of characters that includes letters, numbers, and symbols.

Learn more about password here:

https://brainly.com/question/26471832

#SPJ4

Events known as stimuli cause a response in the body as a result of environmental changes.

Any sensation or action that causes a tissue or organ to react is referred to as a stimulus. The plural of stimuli is stimulus. Two categories of stimuli exist internal stimulus, which originates within the body, as opposed to external stimulus, which comes from without. In order to adjust to changes in its internal and external environments, the body reacts to stimuli. For instance, when it's hot outside, the brain is stimulated by heat receptors, and we begin to perspire to cool down. The brain analyzes the stimulus and sends instructions to the appropriate organs and tissues through motor neurons so they can react to the stimulus. In order for an organism to survive and adapt to its environment, responsiveness to stimulus is crucial.

Learn more about Stimulus here:

https://brainly.com/question/22214592

#SPJ4

Data Execution is not one of the six steps of CRISP-DM Process. The CRISP-DM Process consists of the following six steps: Business Understanding, Data Understanding, Data Preparation, Modeling, Evaluation, and Deployment.

Data Execution is the process of executing a computer program or algorithm that is stored in a computer's memory. This involves running the program's instructions and retrieving data from the memory to be used in calculations. Data Execution also involves storing the results of the calculations back into memory. This process is necessary in order for the computer to carry out its tasks efficiently and accurately. Data Execution is a key element of computer programming, as it is responsible for the actual execution of a program's code and commands. Without it, a computer would not be able to perform any tasks.

To learn more about Data Execution
https://brainly.com/question/29220726
#SPJ4

If you choose a grip on an object and right-click, the menu will always have the same choices no matter what kind of object you choose. The response is untrue.

When you click over a single arc or line segment, also known as a subobject, within a polyline, you can select it by holding down the Ctrl key (not available in AutoCAD LT). The prompt's Open option takes the place of the Close option if the polyline you choose is a closed polyline.

When asked to add an additional object, click it while holding down the Shift key to include it in the selection set.

To know more about Ctrl key visit:-

brainly.com/question/30075502

#SPJ4

A data analyst is creating the title slide in a presentation. The data they are sharing is likely to change over time, so they include the representation of data on the title slide.

Data analyst: In order to find relevant information, support inferences, and help decision-making, data analysis is the process of analyzing, cleaning, manipulating, and modeling data. Data analysis has various dimensions and approaches and is used in many corporate, scientific, and social science sectors. It employs a variety of methods and goes by numerous names.

Data representation: Analyzing numerical data is a technique called data representation. In a diagram using data representation, the relationship between facts, ideas, information, and concepts is shown. data representation means visualize data which can be in many ways like graph, line, piechart, scatterplot, and other graphical ways.

Know more about data analyst:

https://brainly.com/question/28893491

#SPJ4

Because of the number of occurrences of the value target in nums method findLongest does not work as intended.

The variable lenCount is increased when the target and the current array element have the same value. It keeps track of the number of times the value target appears in nums and is never reset. If lenCount exceeds maxLen, the procedure returns maxLen, which is changed to lenCount at the conclusion of the loop.

FindLongest does not function as intended due to the quantity of instances of the value target in the nums method. Add  between lines 12 and 13, the statement lenCount = 0; will ensure that the method findLongest functions as intended.

An piece of code known as a method only executes when it is called. A method can accept parameters that are data. Methods, often known as functions, are used to execute specific actions.

Learn more about array here:

https://brainly.com/question/19570024

#SPJ4

Use one of the three commands: ps, top, or htop to list processes in Linux. While top and htop sort by CPU usage, the ps command provides a static snapshot of all processes.

A Linux command-line tool known as vmstat that reports various system data is called the virtual memory statistics reporter. The variety of information offered covers topics like memory, paging, processes, IO, CPU, and disc scheduling.

The htop command allows you to view the CPU utilisation on your computer.

To know more about Linux visit:-

brainly.com/question/10599670

#SPJ4

Purchase two graphics cards with SLI and similar specifications, Connect at least one monitor to the graphics card, Purchase a motherboard with two (or more) PCIe x16 slots will be a part of the configuration process.

Configuration is the process of customizing a system to meet specific needs or preferences. This includes determining the settings and parameters of devices, applications, and services in order to allow them to properly function. It generally involves setting up the software and hardware components to work together in a specified way. Configuration may also include the process of configuring a network, server, database, or other system components. It can also involve configuring security settings and other settings that control access and performance. Configuration is often done manually, however, it can also be automated using scripts, tools, and other methods.

To learn more about configuration

https://brainly.com/question/21628921

#SPJ4

The value of p after the following code fragment executes is 5912, assuming that the for-each loop accesses the entries of the Array list in index order.

A dynamic array, often known as a re-sizable array, is an array list. It expands in size to provide room for additional elements and contracts in size for removal of those ones. The elements of an array list are internally stored in an array. It allows you to retrieve the elements by their index, just like arrays.

While Array list is a variable-length Collection class, the array is a data structure with a specified length. Java uses the phrases array and array list, which have numerous distinctions.

To know more about Array list visit:-

https://brainly.com/question/30167785

#SPJ4

Today, we know that all quasars appear to be small sources of energy with redshifts that indicate they are far away.

In physics, energy is the capacity to perform work. It can take the form of a potential, kinetic, thermal, electrical, chemical, nuclear, or other entity. There is also heat and work, which are both examples of energy in the process of being transferred from one body to another. Energy is always designated after it has been transferred based on its nature. As a result, heat transferred can become thermal energy, whereas work done can manifest as mechanical energy.

Motion is linked to all forms of energy. For example, any moving body has kinetic energy. Even when at rest, a tensioned device, such as a bow or spring, has the potential for motion; it contains potential energy due to its configuration.

Learn more about energy here:

https://brainly.com/question/10501228

#SPJ4

Here is an algorithm in C++ that prompts the user to input the list price of the car and prints the least amount that the dealer would accept for the car:

#include <iostream>

using namespace std;

int main() {

   double list_price, dealer_cost, min_accepted_price;

   const double DEALER_COST_PERCENTAGE = 0.85;

   const double MIN_ACCEPTED_PRICE_OVER_COST = 500;

   cout << "Enter the list price of the car: ";

   cin >> list_price;

   dealer_cost = list_price * DEALER_COST_PERCENTAGE;

   min_accepted_price = dealer_cost + MIN_ACCEPTED_PRICE_OVER_COST;

   cout << "The least amount the dealer would accept for the car is: $" << min_accepted_price << endl;

   return 0;

}

The algorithm starts by including the library iostream and declaring the namespaces. Then it declares the variables that will be used in the program (list_price, dealer_cost, min_accepted_price) and the constants that will be used (DEALER_COST_PERCENTAGE and MIN_ACCEPTED_PRICE_OVER_COST). Then it prompts the user to enter the list price of the car. Next, it calculates the dealer's cost by multiplying the list price by the dealer cost percentage and the minimum amount the dealer would accept by adding the dealer's cost to the minimum accepted price over cost. Finally, it prints the least amount the dealer would accept for the car.

Start the bootrec /rebuildbcd command while in the recovery environment. On the Advanced Startup Options menu, select Disable automatic restart after failure.

In the System Configuration Utility tool, you have the option to choose between Normal startup, Diagnostic startup, or Selective startup (Msconfig.exe). When you restart your computer, the option that you chose, if you chose Normal startup, can change to Selective startup. Your computer should be restarted and repaired before selecting Startup Repair.

In addition to scanning and fixing many volume, system, and file issues, it has evolved into a highly helpful tool over time. Since practically any Windows installer allows you to execute chkdsk through the portable version of command prompt, this is why so many people use it to fix booting difficulties. It's possible that your drive is turned OFF in System Setup if it is not recognized. Unused ports may be automatically disabled in the BIOS by some motherboard manufacturers.

To learn more about Reboot refer to :

https://brainly.com/question/27773523

#SPJ4

There is no need for a prerequisite; the method will always function as intended. The code segment does not compile, hence the array newVals won't have any values.

The method call will now result in a run-time error because it tries to access a character at index 7 in a string whose last element is at index 6, even though it used to work without a problem. An array must contain only items of the same class. Because the elements in an array are all of the same type, this is necessary. The best choice is A. Int is the data type, geeks is the array name, and [20] is the array's size.

Learn more about array here-

https://brainly.com/question/19570024

#SPJ4

The following settings that should be configured to meet the requirements is C. WPA encryption, infrastructure mode, and MAC filtering

Encryption can be defined as the method by which information is converted into secret code that hides the information's true meaning. The science of decrypting and encrypting information is called cryptography. In computing terms, unencrypted data is also popular as plaintext, and encrypted data is called ciphertext.

Encryption also can be described as a way to conceal information by altering it so that it appears to be random data. Encryption is essential for security on the Internet.

Here you can learn more about encryption in the link brainly.com/question/17017885

#SPJ4

The task summary Delete the fraudulent emails from Online Banking, Grandma Jacklin, the Microsoft Windows Update Center, and other sources.

Delete the spear phishing email from Emily Smith.

Delete the email with the malware attachment from Sara Goodwin.

Delete the forwarded email from Grandma Jacklin.

Delete the Joe Davis email with the malware attachment.

Get rid of the executive recruitment email

Explanation

You need to erase every malicious email in this lab.

Diagnosis Action Description for Email

New Service Pack at the Microsoft Windows Update Center Phishing Delete Take note of the numerous spelling mistakes and the fact that the link does not take you to a Microsoft website.

an embedded link, it has a digital signature, so you may be sure that it was sent from your human resources division. A secure link to the company's web server is also visible when you hover over the link.

Learn more about Microsoft here:

https://brainly.com/question/8985334

#SPJ4

It is TRUE that The constraint flag can be selected, then the delete key on the keyboard can be used to remove any applicable geometric limitations.

Many CAD applications, including AutoCAD, Inventor, and other programs of a such nature, provide this as a standard feature. The user can change the design without being constrained by the restrictions that had already been placed by removing constraints.

When removing restrictions, it's crucial to exercise caution because doing so could have an impact on the overall design or lead to model errors. Before removing any limits, it is always advised to keep a backup of the design. It is an effective tool for designers to change the design to suit their needs. The geometric constraints are eliminated, allowing for flexibility in the design process and the exploration of other solutions while keeping the design's needs and specifications. It is simple to update and modify the design to meet user needs because geometric limitations can be removed.

Find out more about geometric constraints

brainly.com/question/13643976

#SPJ4

The first thing that is displayed after logging into a Windows Server as an administrator is the Server Manager Dashboard.

Windows Server is an operating system developed by Microsoft that enables businesses to store, manage and process data. It is a server-based platform that provides various services and features to businesses, such as remote access, file and printer sharing, virtualization, web hosting, and domain management. It is built on Windows NT technology and is designed to be secure, reliable and scalable, providing businesses with cost-effective solutions for their IT needs.

This dashboard is an interactive tool that provides an overview of the server's current state and allows administrators to manage the server's roles, features, and settings. It also provides quick access to server tasks, such as creating and managing user accounts, adding and removing roles, and managing server security.

To learn more about Windows Server

https://brainly.com/question/14526761
#SPJ4

This error is due to the Spring framework being unable to convert a String value to the required type of LocalDate.

The static LocalDateTime can be used to construct a LocalDateTime object from a string. parse() technique. As a parameter, it accepts a DateTimeFormatter and a string. The date/time pattern is specified by using the DateTimeFormatter.

A string is typically implemented as an array data structure of bytes (or words) that stores a sequence of elements, typically characters, using some character encoding. A string is generally regarded as a data type. String may also refer to more general arrays or other data structures and sequence (or list) data types.

Learn more about string value:

brainly.com/question/7143302

#SPJ4

The C code creates a simple program that prompts the user to enter two integers, multiplies them together, and prints the result.

/*
 The following C program is a basic program that takes in two integers from the user,
 multiplies them, and prints the result.
*/
#include <stdio.h>
int main(){
 int a, b;
 int result;

 printf("Please enter two integers:\n");

 scanf("%d %d", &a, &b);

 result = a*b;

 printf("The result is %d\n", result);

 return 0;

}

// C to Assembly Activity Template

// Functionality of the C Code:

The code begins by including the standard I/O library and declaring three variables, a and b which correspond to the two integers the user will enter, and result which will store the result of the multiplication of a and b. The program then prints a prompt to the user asking them to enter two integers, and uses the scanf() function to read the user’s input and store it in the a and b variables. The result is calculated by multiplying a and b and stored in the result variable. Finally, the program prints the result to the user.

To learn more about code
https://brainly.com/question/23275071
#SPJ4

You ought to use partial mesh network topologies. Traffic can still be redirected using the other cables if a cable segment breaks.

Large backbone networks, where the loss of a single switch or router can bring down a significant chunk of the network, are where a mesh topology is most frequently utilized.

Mesh topology's main benefit is that it has short links (less than 100 feet) and low transmit power, resulting in a relatively long battery life and the ability to move a lot of data throughout the network.

To know more about network visit:-

https://brainly.com/question/14276789

#SPJ4

A tenant screening tool known as a rental background check enables landlords to view various facets of a rental applicant's prior behaviour. The three major credit bureaus, Equifax, TransUnion, and Experian, provide the majority of the information you'll see.

Because there are so many different types of background checks, hiring managers frequently have no idea what will be in the report, and job candidates frequently have no idea exactly what information an employer can look up on them. Background checks come in many different varieties and are applied in various circumstances.

There is no emphasis on accuracy when conducting free online background checks. The majority of them include an accuracy disclaimer in their results.

To know more about background check visit:-

brainly.com/question/20709418

#SPJ4

The Integrity Enabled configuration parameter governs the self-protection function. The feature's entirety is activated by default when the parameter is set to 0x7.

The McAfee MOVE AntiVirus (Multi-platform) client components are shielded from malicious attacks thanks to the self-protection function. This maintains your virus defense steady and functional. Select General Options Application Settings from the settings box for the application. Choose one of these: Selecting the Enable Self-Defense check box will activate the self-defense mechanism.

Our complete, centrally managed endpoint security platform is called McAfee® Endpoint Security. With a single agent for numerous technologies, including our most cutting-edge defenses like machine learning-based analysis and behavioral monitoring, it replaces dated technologies like McAfee VirusScan® Enterprise.

To know more about self-protection function visit:-

https://brainly.com/question/27582416

#SPJ4

The aim and motive of a threat actor are the most important aspects of their profile for determining the danger they provide to an organization.

The process of identifying, communicating, and comprehending the threats and mitigations that might have an influence on a certain system or network is referred to as threat modeling. Threat modeling is crucial because it lowers risk exposure by reducing and addressing vulnerabilities. Threat modeling is essentially a methodical and organized approach that aids in determining the security requirements of a system or process. The Nation States is a simulation of a nation-building game that lets you create and provide for your people in accordance with your political ideas, or you can use it to deliberately kill them. It is a concept in which individuals, especially those who live in a sovereign state, are organized in a way that is culturally homogenous. It is a nation made up of just one nationality, as opposed to several.

Learn more about Threat modeling here:

https://brainly.com/question/28452102

#SPJ4

You have learned in this course, spreadsheets are digital worksheets that enable data analysts to do of the following tasks: analyze large amounts of data, create charts and graphs, perform calculations.

What is spreadsheets?
A spreadsheet is a type of software used to store and manipulate data. It consists of cells organized into columns and rows and can include formulas to link cells and perform calculations. Spreadsheets are used in a variety of applications such as budgeting, accounting, data analysis, and other financial tasks. Spreadsheets are often used to create graphical representations of data, such as charts and graphs. Spreadsheets can also contain macros, which are commands that allow users to automate tasks and make complex calculations easier. Spreadsheets are versatile and efficient tools for organizing, analyzing, and presenting data.

To learn more about spreadsheets

https://brainly.com/question/28609285

#SPJ4

Click the header and use the vertical ruler to the right of it to adjust the height if necessary. You may adjust its size by lifting and lowering it.

In the field of information technology, a header is extra data that is appended to the start of a block of data that is being transferred or stored. To support parsing, header construction must adhere to a precise and unambiguous definition or standard. email subject line Before the text, there are header lines with information like the sender, receiver, subject, sending time and date, as well as the sending and receiving timestamps of every intermediate and final mail transfer agent. Both HTTP headers and Usenet messages contain similar headers. An Internet data packet's header information. Click the header and use the vertical ruler to the right of it to adjust the height if necessary. You may adjust its size by lifting and lowering it.

Learn more about Header here:

https://brainly.com/question/29793300

#SPJ4

Key audiences may be adversarial, neutral, or friendly are challenges commanders face in identifying key audiences.

Your target audience is the particular demographic of customers most likely to be interested in your product or service and, as a result, the group that should see your advertising efforts. The target audience may be determined by a variety of characteristics, including age, gender, income, location, and hobbies. The identification and improvement of audience perceptions, motivations, and needs that are pertinent to a behaviour, product, or service is known as audience insight. The audience frequently has no idea of these [perceptions], reasons, or needs.

The five types of audience analysis include situational analysis, demographic analysis, psychological analysis, multicultural analysis, and analysis of topic interest and prior knowledge. This chapter also looks at these five categories in more detail.

Learn more about the Audiences here: https://brainly.com/question/28773153

#SPJ4