Answer:
They will be considered ions of the same element.
Explanation:
Ions form from elements when they gain or loss an electron, causing the number of protons (positively charged) to be unequal to the number of electrons (negatively charged), resulting in a net charge.
If there are more electrons than protons (from an element gaining 1 or more electrons), the ion is negatively charged and is called an anion.
If there are more protons than electrons (via the loss of electrons), the ion is positively charged and is called a cation.
Hello! Everyone:) I was just wondering if you can help me with my test.
Points: 99
Answer:
By their properties ;)
Explanation:
[tex]\Large \boxed{\sf by \ their \ properties}[/tex]
Every element has a set of particular characteristics. Each has a unique atomic and mass number because they contain a different ratio of protons and neutrons. The number of protons in an element mirrors the element's atomic number. The mass number equals the sum of the element's protons and neutrons.
According to increasing atomic numbers, chemical elements get organized. Periods and groups are the names of the horizontal rows and vertical columns, respectively. The chemical characteristics of elements within the same group are comparable due to their similar valency and number of outer electrons.
How do i find a ionic formula?
for example Ca2+ & S2-
Example #1 write the chemical formula for Calcium Oxide
Step 1
-Find the Atomic symbol of the metal and non-metal on the periodic table
CaO
Step 2
Find the charges for Calcium and Oxygen
which are Ca 2+ and O 2-
Step 3
Balance out the charges
They are already balanced out
Here´s the chemical formula for Calcium Oxide
CaO
Example 2 write the chemical formula for Aluminum Oxide
Step 1
-Find the Atomic symbol of the metal and non-metal on the periodic table
A
l
O
Step 2
Find the charges for Aluminum and Oxygen
Which are Al 3+ and O 2-
Step 3
Balance out the charges
You need 2 Aluminum and 3 Oxygen to balance the charges
Al 3+ O 2-
Al 3+ O 2-
= 6 + O 2-
= 6-
Step 4
If you need more then one element to balance out the charges you identify that by using subscripts
Heres your chemical formula for Aluminum Oxide
[tex]Al_{2} O_{3}[/tex]
what are Metals that are less reactive than alkali metals and alkaline-earth metals called
Answer:
The first ionization energies (I1) of the alkaline earth metals are not as low as the alkali metals. The alkaline earth metals are therefore less reactive than the alkali metals (Be and Mg are the least reactive of the alkaline earth metals). Several physical properties of these elements are compared in Table 7.7.
Reactions cannot occur without a certain minimum amount of energy. What is this minimum amount of energy called?
the activation energy
the activated complex
the kinetic energy of reactants
the potential energy of products
What is the melting point of water ?
what is the freezing point of water?
Answer:
Freezing point: 32°F or 0°C
Boiling point: 212°F or 100°C
what is mass tbh pls he;p
Answer:
how much matter is in an object
Explanation:
how do i find the name of an element
Answer:
The periodic table will say it underneath the symbol.
Explanation:
I don't know how else to describe it but I hope this helps. :)
Why is the energy supplied by the cooker greater than that calculated in part (a)
Answer:
136000 J or 136 kJ
Explanation:
Formula
Heat = m * c * deltaH
Givens
m= 0.5 kg
c = 3400 J / (kg * oC)
Deltat = (100oC – 20oC)
deltat = 80oC
Solution
Heat = 0.5 kg * 3400 J/(kg* oC) * 80oC
Heat = 136000 Joules
Heat = 136 kg
Technically there is only 1 place of accuracy.
`Carbon Dioxide and Water are the _______ in a chemical reaction. 2. Reactants are also called the starting _______ in a chemical reaction.: Reactants are also called the starting _______ in a chemical reaction. 3. This type of energy comes from the sun: a This type of energy comes from the sun 4. You get this type of energy from food: b You get this type of energy from food 5. The process by which plants use the sun to produce glucose and oxygen.: The process by which plants use the sun to produce glucose and oxygen. 6. The products of photosynthesis: The products of photosynthesis 7. The location of photosynthesis in plant cells: The location of photosynthesis in plant cells 8. Another name for glucose is: Another name for glucose is 9. Energy is provided by this cell organelle during cellular respiration: Energy is provided by this cell organelle during cellular respiration 10. The largest source of energy on earth comes from the: d The largest source of energy on earth comes from the Column B a.Chloroplast b.Ingredients c.Reactants d.Sun e.Radiant energy f.Sugar g.Chemical energy h.Glucose and Oxygen i.Mitochondria j.Photosynthesis
BEBE
It is believed the major reason for the decline in amphibian species is
a. death through disease
b. changing reproductive habits
mutation
d. climate change
C.
Please select the best answer from the choices provided
Answer:
Climate change is the answer
Explanation:
They have to adapt and if the climate changes they no longer can
Answer:
climate change
Explanation:
edge 2022
What are the most important topics for revision in chemistry?
Answer:
structure of atom
states of matter
classification of elements and periodicity in properties
thermody namic
Equilibrium
Redox reacation
What equation explains the relation between amperes, watts and volts?
I = W-V
I = W+V
I = W/V
I = W*V
Answer:
I = W/V
Explanation:
Comes from the Equation P=I*V where P is Power measured in Watts, I is Current measured in Amps and V is Voltage measured in Volts.
Which statements best describe the functions of nucleic acids and proteins?.
The statement describing nucleic acid has been that nucleic acid provides the blueprint for the formation of proteins.
Nucleic acid has been the genomic material in the body that performs the function of storage of information. DNA and RNA are nucleic acids.
The proteins are the biomolecules that are composed of amino acid units bound by the polypeptide bond. The information for the correct sequence of binding of protein has resulted from the mRNA codes.
The correct sequence and folding results in the operational protein, that has been able to perform varying functions. The codes for the binding of protein have resulted from the blueprint consisting of nucleic acid.
Thus, nucleic acid performs the function of acting as a blueprint for the formation of proteins.
For more information about proteins, refer to the link:
https://brainly.com/question/2193769
A mechanical pencil is 14 cm long. What is its length in mm?
Answer:
140mm................
Arrange the gases from most dense to least dense at a given temperature and pressure.
Most dense
Least dense
Answer Bank
Ar
Ne
CO2
H
C12
Answer:
Arrange them in order of greatest to least Molar Mass to get most dense to least dense at a given temperature and pressure.
Explanation:
"Given Temperature and Pressure" just tells you that those two variables are being held constant. The Ideal Gas Law (PV = nRT) shows that n (the # of moles) and V (the volume) are variable still. To keep pressure constant, we need to increase the volume so that the force per area is the same which would unfortunately lower the density. The only way for a gas to have the greatest density would be to have the least average kinetic energy to keep the pressure constant at a smaller volume. This is because kinetic energy is equal to KE = 1/2 m v^2, where m is mass in kilograms and v is the velocity. IT IS CRUCIAL TO NOTE THAT ACCORDING TO KINETIC MOLECULAR THEORY, ALL GASES HAVE THE SAME AVG. KINETIC ENERGY WHEN AT THE SAME TEMPERATURE. So since the avg. KE is also constant across these answers due to the temp. being constant, our only way to decrease the velocity (the rate at which the particles are moving per second) and in turn the number of collisions (to repeat, a smaller number of collisions is desired because they are equal to the pressure that must maintained at a constant value at the smallest volume possible to achieve highest density possible) is to increase the molar mass. This is also pretty intutive for the other part of the issue: since Density is a broken heart (m/v), a higher molar mass would ensure a smaller pressure (due to decreased velocity) and smaller volume (due to constant pressure). Okay, now order the gases heaviest to lightest in terms of molar mass and you got your answer. Please gimme brainliest if this helped bc it took 15 minutes to type out. Hope this helped you! :D
Density is an intensive property as it does not depend on the quantity of the substances Whereas mass and volume are extensive property. The order of density is carbon dioxide>Neon >argon>carbon-12> hydrogen.
What is density?Density tells about the compactness of the substances, how much dense is the substances in other words. Object that is more denser than water they just sink in the water.
Mathematically,
Density of gas = Molar Mass of the gas ÷volume occupied by the given gases
Density is directly proportional to molar mass of the gases.
Molar mass of argon = 18g/mole
Molar mass of Neon = 20g/mole
Molar mass of carbon dioxide=44.01 g/mol
Molar mass of hydrogen=1g/mol
Molar mass of carbon-12=12g/mol
The order of gases from most dense to least dense at a given temperature and pressure is carbon dioxide>Neon >argon>carbon-12> hydrogen.
Therefore, the order of density is carbon dioxide>Neon >argon>carbon-12> hydrogen.
To know more about density, here:
https://brainly.com/question/16894337
#SPJ2
Question 24 of 25
How can one tell if a reaction is a redox reaction?
O A. Elements change phases.
O B. A precipitate is formed.
O C. Spectator ions are present.
O D. Electrons are gained and lost.
Answer:
D. Electrons are gained and lost
Explanation:
When electrons are gain and lost, redox reaction takes place. In redox reaction, reduction and oxidation tales place simultaneously. Therefore, option D is correct.
What is redox reaction ?Redox reactions include a change in the oxidation state of the substrate. When electrons are lost or the oxidation state increases, it is called oxidation; when they are gained or the oxidation state decreases, it is called reduction.
Redox reactions are those in which there is a change in the oxidation number, with both an increase and a drop in number. The reaction called non-redox if this does not take place.
Oxidation and reduction always occur jointly because any loss of electrons by one substance must be followed by a gain of electrons by another. Therefore, oxidation-reduction processes or simply redox reactions are other names for electron-transfer events.
Thus, option D is correct.
To learn more about redox reaction, follow the link;
https://brainly.com/question/13978139
#SPJ2
convert 150 K to degrees F
Answer:
150K is 253.67°F
Explanation:
There is a simple formula to convert from Kelvin to Celsuis;
C° = K - 273.15
C = 150 - 273.15 C = -123.15Then you would convert Celsuis into Fahrenheit using the formula:
[tex]F = \frac{9}{5}C + 32\\[/tex]
[tex]F = \frac{9}{5}(-123.15)+32\\F = 221.67 + 32 \\F = 253.67[/tex]Which of the following is not an ingredient for photosynthesis?
A. Oxygen
B. Carbon dioxide
C. Light energy
D. Vinegar
Answer:
d
Explanation:
......................
Answer:
D. vinegar
Explanation:
Hope this helps you!!
MARK AS BRAINLIEST!!
Write the chemical formula for the following ionic compound nickel (III) sulfate 
Answer:
Nickel(III) Sulfate Ni2(SO4)3 Molecular Weight -- EndMemo.
Explanation:
this will explain everything
How many atoms are in 80.45 g of magnesium with explanation
Answer:
There are 1.9926 * 10 ^24 atoms.
Explanation:
M ( Mg ) = 80.45 g
We can find the molar mass of magnesium in the Periodic table:
M ( Mg ) = 24.31 g / mole
n = 80.45 g : 24.31 g/mole = 3.31 moles
N a ( Avogadro`s constant ) = 6.02 * 10 ^23
N = Na * n = 6.02 * 10 ^24 * 3.31 = 19.926 * 10 ^23
2) Imagine that a loudspeaker is producing quiet note with a low pitch
How will it’s viberation change
a) If the pitch of the note becomes higher?
b) If the note become louder
Answer:
Higher pitched sounds produce waves which are closer together than for lower pitched sounds. (Think of the slinky - if you produce waves rapidly they will travel quite close to each other, thus demonstrating a higher pitched sound.)
The pitch of a note will depend on a number of factors. One of these is the size of the vibrating object. On a glockenspiel or xylophone the high notes are made by the smaller bars. A smaller triangle or cymbal will make a relatively higher pitch note. On a stringed instrument such as a guitar or violin a thinner string will generally make a higher note, but also shortening the string by stopping it with the finger will produce a similar effect. On a set of pan pipes or a church organ it is the shorter pipes which make the higher notes when the air inside them vibrates.
Another factor which produces higher pitched notes is the tension within the vibrating object. A guitar string can be tuned to a higher pitch by adjusting the string tensioner. An elastic band can be stretched tighter and a drum skin can be tensioned to increase the pitch of the sound it produces.
Earth’s layers are determined by their physical properties and chemical composition. In the lesson, you learned about each of Earth’s layers, what the layers are made of, and why they are important to the Earth. In the space below, write about how the atmosphere may be classified. Would it be part of the lithosphere, or a separate layer? Explain your answer.
Answer:
The Atmosphere Is a separate layer And Also could be classified as the Closest layer
Explanation:
Which of the following statement is correct regarding motors and generator?
Answer:
A. Motors and generators are opposite processes
Explanation:
B, C, and D are wrong because, the term electrical generator is used to describe a range of devices that convert mechanical energy into electricity. A motor converts electrical energy into mechanical, which is the opposite process to the electrical generator.
A protozoan gains shelter as it lives in the intestine of a termites, helping the termite to be able to digest the wood that it eats. This symbiotic relationship between the termite and protozoan is known as:
Answer:
The ecological relationship between termites and the wood-digesting protozoans that live in their gut is an example of mutualism. Thank you for posting your question here at brainly. I hope the answer will help you.
How many neutrons are in K-37?
Answer:
is this physics
pls check your questions and try again
A scientist was in the field when he saw a mineral sample. He wanted to determine the relative hardness of the mineral, so he conducted scratch tests. He summarized his results in a table. A 2 column table with 4 rows. The first column is labeled Mineral with known hardness with entries: Chalcopyrite, pyrite, Orthoclase, Quartz. Second column is labeled Was a scratch produced? with entries: Yes, Yes, Yes, No. What conclusion can you make about the hardness of the mineral?.
The mineral hardness depends on its resistance to being scratched. Mohs scale is used to determine the hardness of an unknown mineral. The unknown mineral is harder than Orthoclase, but not harder than Quartz.
-------------------------
The hardness of a mineral is its resistance to being scratched or marked on the surface by another material.
Several elements are used to test the hardness of a mineral, like another mineral of known hardness.
Many different scales can be used to identify the mineral. However, the most commonly used is the Mohs scale.
Let us say that you have two minerals. You already know which mineral is one of them and its hardness.
If the unknown mineral scratches the known mineral, means that the first one is harder than the second one.But if the unknown mineral does not get to scratch the known one, it means they are equally hard, or the known mineral is harder than the unknown one.In the exposed example, the table must be as follows
Mineral Was a scratch produced?
Chalcopyrite YES
pyrite YES
Orthoclase YES
Quartz NO
Quartz is the hardest of these minerals. Its hardness level is 7 according to the Mohs scale.
Because scratches were produced using Chalcopyrite, Pyrite, and Orthoclase, we can assume that the unknown mineral is harder than these three ones.
However, no scratch was produced using quartz, suggesting that the unknown mineral is between orthoclase and quartz in the Mohs scale.
The unknown mineral is harder than Orthoclase, but not harder than Quartz. It is between 6 and 7 hardness levels.
---------------------------
You can learn more about the Mohs scale at
https://brainly.com/question/198363
https://brainly.com/question/1585664
https://brainly.com/question/10202262
Answer:
I can conclude that the mineral that the scientist found is harder than chalcopyrite, pyrite, and orthoclase, but not harder than quartz. I can also conclude that the unknown mineral is a relatively hard mineral.
Explanation:
edge example 2023
The boiling points of different substances are given in the table below. Substance Boiling point (°C) Acetic acid 118. 1 Benzene 80. 2 Chloroform 61. 2 Water 100. 0 Which substance most likely has the strongest intermolecular forces? acetic acid benzene chloroform water.
The compound with the presence of higher inter-molecular forces has been Acetic acid. Thus, option A is correct.
The boiling point has been the temperature, at which the liquid has been started to convert to steam. The boiling has been mediated with the application of the energy to the substance for the breaking of the inter-molecular forces.
The higher the inter-molecular forces in the compound, the higher will be the boiling point of the compound. The higher concentration has also resulted in a higher boiling point.
In the following compounds, acetic acid has the highest boiling point of 118 degrees Celsius. Thus, it has been constituted of the higher inter-molecular forces. Hence, option A is correct.
For more information about boiling point, refer to the link:
https://brainly.com/question/2153588
what are some negative impacts on the environment and society when the water cycle is disrupted and drought occurs ?
Some of the negative impact of disruption in water cycle are adverse environment, with affected farming, hydroelectricity, and deforestation.
The water cycle has been operated in the environment for the conversion of water in the different states. The water cycle has been operated with the conversion of water from the water body to the clouds by evaporation.
The evaporated water has resulted in clouds, that have been condensed and precipitated in the form of rain. The water cycle helps in maintaining the water balance in the ecosystem. It made the water available for use as well.
The drought has been the condition of the scarcity of water. In this condition, there has been a disruption of the water cycle. Some of the negative impacts resulting from the disruption of the water cycle are:
Adverse environmental conditionsFarming affected by water scarcityUnavailability of hydroelectricityDeforestationFor more information about water cycle, refer to the link:
https://brainly.com/question/1151425
Enter the correct ground-state (or lowest energy) configuration based on the number of electrons: 1s^4 2s^4 2p^12.
Express your answer in complete form in the order of orbital filling as a string without blank space between orbitals.
Answer:
The ground state configuration is the lowest energy, most stable arrangement. An excited state configuration is a higher energy arrangement (it requires energy input to create an excited state). Valence electrons are the electrons utilised for bonding.
or the
FIGURE 5.9 The arrow shows a second way of remembering the order in which sublevels fill. Table 5.2 shows the electron configurations of the elements with atomic numbers 1 through 18.
Element Atomic number Electron configuration
sulfur 16 1s22s22p63s23p4
chlorine 17 1s22s22p63s23p5
argon 18 1s22s22p63s23p6
or the
Two electrons
Two electrons fill the 1s orbital, and the third electron then fills the 2s orbital. Its electron configuration is 1s22s1.
Explanation:
Choose your answer
brainlilest me
CARRY ON LEARNING
WILL GIVE BRANIEST HELP
Which procedures were followed in this lab to decrease experimental error? Check all that apply.
using only two types of seeds, both from the same source
having one student count every sprout in every quadrat
using adjacent plots of land for both groups
increasing the sample size by combining data from multiple groups
repeating the experiment indoors under growth lights
measuring plant height the same way and at the same time for both groups
Answer:
Basically A, C, D, F
Explanation:
Summarizing the answer
Using only two types of seeds, both from the same source.
What are experimental error?Experimental error refers to the uncertainties or mistakes that can occur during scientific experiments, leading to inaccuracies in the results. These errors can arise due to a variety of reasons, such as human error, instrumental error, environmental factors, and methodological issues. The presence of experimental error can make it difficult to draw accurate conclusions from the data obtained during an experiment.
Scientists use various procedures to reduce experimental error and improve the accuracy and reliability of their results. These procedures can include:
using adjacent plots of land for both groupsincreasing the sample size by combining data from multiple groupsmeasuring plant height the same way and at the same time for both groups.Learn more about experimental error, here:
https://brainly.com/question/17038045
#SPJ2
