Calculate the magnitude of a gravitational force between two object 400kg and 800kg separated by a distance of of 45m (take G =6.67 * 10^-11 Nm^2 kg^-2)

Answer:

The elastic energy is 245 J.

Explanation:

Length, L = 5 m

Diameter, D = 10^-3 m

Stretch, l = 3 x 10^-4 m

Load, F = 10 x 9.8 = 98 N

Let the elastic energy is U.

[tex]U = \frac{1}{2}\times stress\times strain\times volume\\\\U = 0.5\times \frac{Force}{area}\times \frac{l}{L}\times Area\times L\\\\U = 0.5 \times F\times l\\\\U = 0.5\times 98\times 5\\\\U = 245 J[/tex]

Solution :

Let [tex]$d_1=\frac{5.5}{2}[/tex]

          = 2.75 m

[tex]d_2 = 0.21 \ m[/tex]

And [tex]$d=|d_1-d_2|$[/tex]

       [tex]$d=(d_1+d_2) - (d_1-d_2)$[/tex]

       [tex]$d=(2.75+0.21) - (2.75-0.21)$[/tex]

       [tex]$d = 2.96-2.54$[/tex]

       [tex]d = 0.42 \ m[/tex]

a). At minimum,

[tex]$d=\frac{\lambda}{2}$[/tex]

[tex]$\lambda = 2d$[/tex]

  = 2 x 0.42

  = 0.84 m

Frequency, [tex]$\nu = \frac{v}{\lambda}$[/tex]

                      [tex]$=\frac{340}{0.84}$[/tex]

                      = 404.76 Hz

Therefore, the frequency of he sound, [tex]$\nu$[/tex] = 404.76 Hz

b). At maximum, λ = d = 0.42 m

Therefore, the frequency, [tex]$\nu = \frac{v}{\lambda}[/tex]

                                             [tex]$=\frac{350}{0.42}$[/tex]

                                             = 809.52 Hz

Answer

Delta Q = change in thermal energy = c M * change in temperature

change in temperature = Q / (c * M)

change in temperature = -12 J  / (390 J / Kg*deg * .012 kg

change in temp = -12 / (390 * .012) =  - 2.56 deg C

Answer:

1. The image is real

2. 5.85

3. h' = 3.05 mm

4. The image is upright

Explanation:

1. Start with the first lens and apply 1/f = 1/p + 1/q

1/5.01 = 1/13.7 + 1/q

q = 7.90 cm

Since that distance is behind the first lens, and the second lens is 62.5 cm behind the first lens, that distance is 62.5 - 7.90 = 54.6 cm in front of the second lens, and becomes the object for that lens, thus,

1/25.9 = 1/54.6 + 1/q

q = 49.3 cm behind the second lens

Using that information, since q is positive, the image is real

2. Also, using that information, you have the second answer, which is 49.3 cm

The height can be found from the two magnifications.

m = -q/p

m1 = -7.9/13.7 = -.577

m2 = -49.3/54.6 = -.903

Net m = (-.577)(-.903) = .521

Then, m = h'/h

.521 = h'/5.85

3. h' = 3.05 mm

4. For the fourth answer, since the overall magnification is positive, the final image is upright

Answer:

39200 joules

the potential energy will be zero

Explanation:

we know that potential energy is found by multiplying mass, acceleration due to gravity and height from the Earth's surface

so it will be

potential energy= mgh

80x9.8x15

= 39200 joules

the potential energy of the mental ball will be zero when kept on the Earth's surface because the height from the Earth's surface will be zero and zero multiplied to any number is zero only

I have a doubt with the second one, this is what I think it is. Consult your teacher if you think my answer for the second one is wrong

Answer:

392000 joules

Explanation:

hope it helpsss

Explanation:

mass=kilogram,temperature=Klevin,power=watt,density=kilogram per cubic metre

Explanation:

the unit of mass is kg , temperature is kelvin ,power is watt and density is kilogram per cubic meter.

Answer:

Both will have the same momentum.

P = M v     momentum

v = a t   for uniform acceleration

P = M a t

But a = F / M

P = M (F / M) t = F t    so both have the same momentum

Answer:

The answer would be D), if the decay is beta negative.

Explanation:

Thorium-232 goes through alpha decay:

Thorium-232 --> Helium-4 + Radium-228

Radium-228 then can undergo beta positive or beta negative decay:

Beta positive = Radium-228 --> Electron + Francium-228

Beta negative = Radium-228 --> Positron + Actinium-228

Therefore, the isotope that is created is Actinium-228

Answer:

[tex]E_0=0.173N/C[/tex]

Explanation:

From the question we are told that:

Power [tex]P=50kw=>50*10^3w[/tex]

Distance [tex]d=10km=10000m[/tex]

Generally the equation for Intensity is mathematically given by

[tex]I=\frac{P}{4\pi d^2} w/m^2[/tex]

[tex]I=\frac{50*10^3}{4 \pi 10000^2} w/m^2[/tex]

[tex]I=3.98*10^{-5}w/m^2[/tex]

Generally Intensity is also

[tex]I=\frac{1}{2}cE_0^2e[/tex]

Where

[tex]e=8.854*10^{-12}Nm^2/c^2[/tex]

Therefore

[tex]E_0=\sqrt{\frac{2I}{c *e}}[/tex]

[tex]E_0=\sqrt{\frac{2*3.98*10^{-5}}{3*10^8 *8.854*10^{-12}}}[/tex]

[tex]E_0=0.173N/C[/tex]

Answer:

Explanation:

The formula for angular momentum is

L = mvr where L is the angular momentum, m is the mass of the object, v is the velocity of the object, and r is the radius of the object. The problem we have that prevents us from just throwing those numbers in there is that mass has to be in kg and it's not, and radius has to be in meters and it's not.

Changing the mass to kg:

750 g = .750 kg

Changing the radius to m:

35 cm = .35 m

Now we can fill in the variables with their respective values:

L = .750(10.0)(.35) gives us

[tex]L=2.625\frac{kg*m^2}{s}[/tex]

Answer:

the answer should be b) 3.8 x 10-5 v

Answer:

Biosphere is the part of the earth where life exists.

Answer:

v = 3.12 m/s

Explanation:

First, we will find the length of the string by using the formula of the time period:

[tex]T = 2\pi \sqrt{\frac{l}{g}}\\\\l = \frac{T^2g}{4\pi^2}\\\\[/tex]

where,

l = length of string = ?

T = time period = 2 s

g = acceleration due to gravity = 9.81 m/s²

Therefore,

[tex]l = \frac{(2\ s)^2(9.81\ m/s^2)}{4\pi^2}\\\\l = 0.99\ m[/tex]

Now, we will find tension in the string in the vertical position through the weight of the ball:

T = W = mg = (3 kg)(9.81 m/s²)

T = 29.43 N

Now, the speed of the transverse wave is given as follows:

[tex]v=\sqrt{\frac{Tl}{m}}\\\\v=\sqrt{\frac{(29.43\ N)(0.99\ m)}{3\ kg}}\\\\[/tex]

v = 3.12 m/s

Answer:

Three Types of Computer The Computer are classified into three main types:: • Analog Computers • Digital Computers • Hybrid Computers (Analog + Digital) Analog Computers:: Analog Computer measures “Physical Quantities” for example Temperature, Voltage, Pressure, and Electric Current.

Answer:

answer

Explanation:

it is the answer which was presented in the year

Answer:

Following are the response to the given question:

Explanation:

It's being used to measure the amount of light absorbed after traveling through a test tube (the amount of solar radiation received). For several quantitative estimations, this technique is widely employed. Spectrometer and Spectrometer were two devices that are used together to light intensity and light intensity.

It creates and diffuses phosphorescent light into the selected frequency, while the Spectrometer measures the strength of attenuation by the sample solution.

Diffraction beams or prisms are being used to convert polychromatic illumination into monochrome light.

Afterward, the sunlight has a certain hue. Once it reaches the specimen cuvette, it begins absorption. It falls on a sensor that transforms its intensity into such an electronic current.

Here are some ways to fill in such gaps:

In order to reach the specimen cuvette, the light from the light source must be routed via an aperture in order to be isolated by either a diffraction pattern. Light travels to the detector, which detects its intensity.

Answer:

the answer is 49000 joules at the maximum height

Explanation:

we know the mass (50kg)

we know the acceleration due to gravity(9.8m/s²)

we know the height too(maximum height meaning the 50th step so we multiply 50 with 20cm as each step is 20 cm and we get 1000 cm, convert to m it is 100 m

the formula is potential energy=mgh

m for mass

g for acceleration due to gravity

h for height

multiply them

50x9.8x100

we get 49000

the unit of potential energy is joules so the answer is

49000 joules

Answer:

49000 joules

Explanation:

hope it helpss

The masses of the gliders provided in the question differ from the masses mentioned in the "Required" section. I'll use the first masses throughout.

Momentum is conserved, so the total momentum of the system is the same before and after the collision:

m₁ v₁ + m₂ v₂ = m₁ v₁' + m₂ v₂'

==>

(0.160 kg) (0.710 m/s) + (0.296 kg) (-2.23 m/s) = (0.160 kg) v₁' + (0.296 kg) v₂'

==>

-0.546 kg•m/s ≈ (0.160 kg) v₁' + (0.296 kg) v₂'

where v₁' and v₂' are the gliders' respective final velocities. Notice that we take rightward to be positive and leftward to be negative.

Kinetic energy is also conserved, so that

1/2 m₁ v₁² + 1/2 m₂ v₂² = 1/2 m₁ (v₁' )² + 1/2 m₂ (v₂' )²

or

m₁ v₁² + m₂ v₂² = m₁ (v₁' )² + m₂ (v₂' )²

==>

(0.160 kg) (0.710 m/s)² + (0.296 kg) (-2.23 m/s)² = (0.160 kg) (v₁' )² + (0.296 kg) (v₂' )²

==>

1.55 kg•m²/s² ≈ (0.160 kg) (v₁' )² + (0.296 kg) (v₂' )²

Solve for v₁' and v₂'. Using a calculator, you would find two solutions, one of which we throw out because it corresponds exactly to the initial velocities. The desired solution is

v₁' ≈ -3.11 m/s

v₂' ≈ -0.167 m/s

and take the absolute values to get the magnitudes.

If you want to instead use the masses from the "Required" section, you would end up with

v₁' ≈ -3.18 m/s

v₂' ≈ -0.236 m/s

Answer:

The correct answer is "[tex](0,300\times 10^{-3} \ N/C)[/tex]".

Explanation:

The given problem seems to be incomplete. Please find the attachment of the complete query.

According to the question,

At point A, we have

⇒ [tex]E_x = \frac{k q_1}{d_1^2} Cos \theta_1 - \frac{k q_2}{d_2^2} Cos \theta_2[/tex]

or,

⇒ [tex]E_x = 9\times 10^9\times [\frac{6\times 10^{-9}}{15^2}\times \frac{9}{15}-\frac{8\times 10^{-9}}{20^2}\times \frac{16}{20} ][/tex]

         [tex]=0[/tex]

and,

⇒ [tex]E_y = \frac{kq_1}{d_1^2}Sin \theta_1 +\frac{kq_2}{d_2^2}Sin \theta_2[/tex]

or,

⇒ [tex]E_y = 9\times 10^9\times [\frac{6\times 10^{-9}\times 12}{15^2\times 15}+ \frac{8\times 10^{-9}\times 12}{20^2\times 20} ][/tex]

         [tex]=0.3 \ N/C[/tex]

The question is incomplete. The complete question is :

Two loudspeakers are placed 1.8 m apart. They play tones of equal frequency. If you stand 3.0 m in front of the speakers, and exactly between them, you hear a minimum of intensity. As you walk parallel to the plane of the speakers, staying 3.0 m away, the sound intensity increases until reaching a maximum when you are directly in front of one of the speakers. The speed of sound in the room is 340 m/s.

What is the frequency of the sound?

Solution :

Given :

The distance between the two loud speakers, [tex]d = 1.8 \ m[/tex]

The speaker are in phase and so the path difference is zero constructive interference occurs.

At the point [tex]D[/tex], the speakers are out of phase and so the path difference is [tex]$=\frac{\lambda}{2}$[/tex]

Therefore,

[tex]$AD-BD = \frac{\lambda}{2}[/tex]

[tex]$\sqrt{(1.8)^2+(3)^2-3} =\frac{\lambda}{2}$[/tex]

[tex]$\lambda = 2 \times 0.4985$[/tex]

[tex]$\lambda = 0.99714 \ m$[/tex]

Thus the frequency is :

[tex]$f=\frac{v}{\lambda}$[/tex]

[tex]$f=\frac{340}{0.99714}$[/tex]

[tex]f=340.9744[/tex] Hz

Answer:

Explanation:

Newton's Second Law is pretty much the standard for all motion that involves a force. It applies to gravitational force and torque and friction and weight on an elevator. The main formula for force is

F = ma. We have to adjust that to take into account that when the elevator is moving up, that "surge" of acceleration weighs down a bit on the scale, causing it to read higher than the actual weight until the acceleration evens out and there is no acceleration at all (no acceleration simply means that the velocity is constant; acceleration by definition is a change in velocity, and if there is no change in velocity, there is 0 acceleration). The force equation then becomes

[tex]F_n-w=ma[/tex]  where [tex]F_n[/tex] is normal force. This is what the scale will read, which is what we are looking for in this problem (our unknown). Since we are looking for [tex]F_n[/tex], that is what we will solve this literal equation for:

[tex]F_n=ma+w[/tex] .  m is the mass of the boy, a is the acceleration of the elevator (which is going up so we will call that acceleration positive), and w is weight. We have everything but the unknown and the weight of the boy. We find the weight:

w = mg so

w = 28(9.8) and

w = 274.4 N BUT rounding to the correct number of significance we have that the weight is actually

w = 270 N.

Filling in the elevator equation:

[tex]F_n=28(.50)+270[/tex] and according to the rules of significant digits, we have to multiply the 28(.50) {notice that I did add a 0 there for greater significance; if not that added 0 we are only looking at 1 significant digit which is pretty much useless}, round that to 2 sig fig's, and then add to 170:

[tex]F_n=14+270[/tex] and adding, by the rules, requires that we round to the tens place to get, finally:

[tex]F_n=280N[/tex]  So you see that the surge in acceleration did in fact add a tiny bit to the weight read by the scale; conversely, if he were to have moved down at that same rate, the scale would have read a bit less than his actual weight). Isn't physics like the coolest thing ever!?

Answer:

d

Explanation:

i think it is rotational inertia

because analogue of mass in rotational motion is moment of inertia. It plays the same role as mass plays in transnational motion.  

hope it's right & helps !!!!!!!!!

Answer:

Explanation:

a)     Fx = F cos (θ)

           = (200) cos(60)

           = 100 N

b)     FR = ma

       Fx + Ff = ma

      100 + Ff = (50)(1,5)

       Ff     = 75 - 100

               =  -25 N

c)    Fy = F sin θ

           = (200) sin(60)

           = 173,2 N

(B)

Explanation:

The speed of the ejected electrons depends on the frequency of the incident radiation. The closer the energy of the incident photons to the work function of the metal, the slower is the speed of the ejected electrons. Intensity of the incident radiation has no effect on the speed of the ejected electrons, only its frequency.

Light falling on a metal surface causes electrons to be emitted from the metal by the photoelectric effect. As we decrease the frequency of this light, but do not vary anything else B: the maximum speed of the emitted electrons decreases.

Photoelectric effect is the phenomenon in which electrically charged particles are released from or within a material when it absorbs electromagnetic radiation. The effect is often defined as the ejection of electrons from a metal plate when light falls on it.

According to Photoelectric effect the kinetic energy of the photo electrons emitted depend on the frequency of incident light , the more is the frequency the more is the kinetic energy of emitted electron and hence high will be the velocity of the emitted electrons and vise versa

since , in question the frequency has been decreased hence , the kinetic energy must be decreased therefore velocity will also get decreased

hence , correct option will be B: the maximum speed of the emitted electrons decreases.

learn more about Photoelectric effect

https://brainly.com/question/9260704?referrer=searchResults

#SPJ2

Answer:

R = 0.0015Ω

Explanation:

The formula for calculating the resistivity of a material is expressed as;

ρ = RA/l

R is the resistance

ρ is the resistivity

A is the area of the wire

l is the length of the wire

Given

l = 85cm = 0.85m

A = πr²

A = 3.14*0.0018²

A = 0.0000101736m²

ρ = 1.75 × 10-8Ωm.

Substitute into the formula

1.75 × 10-8 = 0.0000101736R/0.85

1.4875× 10-8 = 0.0000101736R

R = 1.4875× 10-8/0.0000101736

R = 0.0015Ω

Answer:

the initial velocity of the car is 12.04 m/s

Explanation:

Given;

force applied by the break, f = 1,398 N

distance moved by the car before stopping, d = 25 m

weight of the car, W = 4,729 N

The mass of the car is calculated as;

W = mg

m = W/g

m = (4,729) / (9.81)

m = 482.06 kg

The deceleration of the car when the force was applied;

-F = ma

a = -F/m

a = -1,398 / 482.06

a = -2.9 m/s²

The initial velocity of the car is calculated as;

v² = u² + 2ad

where;

v is the final velocity of the car at the point it stops = 0

u is the initial velocity of the car before the break was applied

0 = u² + 2(-a)d

0 = u² - 2ad

u² = 2ad

u = √2ad

u = √(2 x 2.9 x 25)

u =√(145)

u = 12.04 m/s

Therefore, the initial velocity of the car is 12.04 m/s

La energía que almacena el resorte cuando se comprime y estira 12 cm es 9,4 J.  

La energía potencial elástica del resorte se puede calcular con la siguiente ecuación:

[tex] E_{p} = \frac{1}{2}kx^{2} [/tex]

En donde:

k: es la constante del resorte = 1300 N/m

x: es la distancia de compresión o de elongación = 12 cm = 0,12 m

Dado que la energía es proporcional al cuadrado de la distancia recorrida por el resorte (x), la energía almacenada por el resorte durante la compresión será la misma que la energía almacenada por la elongación.

Por lo tanto, la energía almacenada es:

[tex]E_{p} = \frac{1}{2}kx^{2} = \frac{1}{2}1300 N/m*(0,12 m)^{2} = 9,4 J[/tex]                                                            

Entonces, la energía del resorte cuando se comprime y cuando se estira es la misma, a saber 9,4 J.                

Para saber más sobre energía potencial visita este link: https://brainly.com/question/156316?referrer=searchResults

Espero que te sea de utilidad!

Answer:

Al comprimirse o estirarse 12 centímetros desde su posición sin deformar, el resorte almacena 9,360 joules.

Explanation:

La Energía Potencial Elástica almacenada por el resorte ([tex]U_{e}[/tex]), en joules, se calcula a partir de la Ley de Hooke, la definición de Trabajo y el Teorema del Trabajo y la Energía, cuya expresión se presenta abajo:

[tex]U_{e} = \frac{1}{2}\cdot k\cdot (x_{f}^{2}-x_{o}^{2})[/tex] (1)

Donde:

[tex]k[/tex] - Constante elástica del resorte, en newtons por metro.

[tex]x_{o}[/tex] - Posición inicial del resorte, en metros.

[tex]x_{f}[/tex] - Posición final del resorte, en metros.

Nótese que el resorte sin deformar tiene una posición de cero, la tensión tiene un valor positivo y la compresión, negativo.

Asumiendo que en ambos casos el resorte se encuentra inicialmente sin deformar, se reduce (1) a una forma de función par, es decir, una función que cumple con la propiedad de que [tex]f(x) = f(-x)[/tex], se encuentra que al comprimirse o estirarse en la misma medida almacena la misma cantidad de energía.

La cantidad de energía a almacenar es:

[tex]U_{e} = \frac{1}{2}\cdot \left(1300\,\frac{N}{m} \right)\cdot (0,12\,m)^{2}[/tex]

[tex]U_{e} = 9,360\,J[/tex]

Al comprimirse o estirarse 12 centímetros desde su posición sin deformar, el resorte almacena 9,360 joules.

Answer:

c) 2Q

Explanation:

From the given information:

The pressure inside a pipe can be expressed by using the formula:

[tex]\Delta P = \dfrac{128 \mu L Q}{\pi D^4}[/tex]

Since the diameter in both pipes is the same, we can say:

[tex]D = D_A = D_B[/tex]

where;

length of the first pipe A [tex]L_A = L[/tex] and the length of the second pipe B [tex]L_B = 2L[/tex]

Since the difference in pressure is equivalent in both pipes:

Then:

[tex]\dfrac{128 \mu L_1Q_1}{\pi D_1^4} = \dfrac{128 \mu L_2Q_2}{\pi D_2^4}[/tex]

[tex]\dfrac{ L_1Q_1}{D_1^4} = \dfrac{ L_2Q_2}{D_2^4}[/tex]

[tex]\dfrac{ LQ_1}{D^4} = \dfrac{ 2LQ}{D^4}[/tex]

[tex]\mathbf{Q_1 = 2Q}[/tex]

The flow rate in pipe B is 2Q of the flow rate of the pipe A

The flow rate is defined as the flow of the fluid across the cross section in per unit time.

From the given information:

The pressure inside a pipe can be expressed by using the formula:

[tex]\Delta p=\dfrac{128\mu LQ}{\pi D^4}[/tex]

Since the diameter in both pipes is the same, we can say:

[tex]D=D_A=D_B[/tex]

where;

length of the first pipe A  [tex]L_A=L[/tex] and the length of the second pipe B  

[tex]L_B=2L[/tex]

Since the difference in pressure is equivalent in both pipes:

Then:

[tex]\dfrac{128\mu L_1Q_1}{\pi D_1^4}=\dfrac{128\mu L_2Q_2}{\pi D_2^4}[/tex]

[tex]\dfrac{L_1Q_1}{D_1^4}=\dfrac{L_2Q_2}{D_2^4}[/tex]

[tex]\dfrac{LQ_1}{D_1^4}=\dfrac{2LQ}{D_2^4}[/tex]

[tex]Q_1=2Q[/tex]

Hence the flow rate in pipe B is 2Q of the flow rate of the pipe A

To know more about Flow rate follow

https://brainly.com/question/26061120

Answer:

 emf = 312 V

Explanation:

In this exercise the electromotive force is asked, for which we must use Faraday's law

           emf =  [tex]- N \frac{d \Phi }{dt}[/tex]- N dfi / dt

           Ф = B. A = B A cos θ

bold type indicates vectors.

They indicate that the magnetic field is constant, the angle between the normal to the area and the magnetic field is parallel by local cosine values ​​1

It also indicates that the area is reduced from  a₀ = 0.325 me² to a_f = 0 in a time interval of ΔT = 0.100 s, suppose that this reduction is linear

            emf = -N B [tex]\frac{dA}{dT}[/tex]

            emf = - N B (A_f - A₀) / Dt

we calculate

           emf = - 60 1.60 (0 - 0.325) /0.100

           emf = 312 V

The direction of this voltage is exiting the page

Answer:

B. A car sits at rest at a stop sign.