Answer:Nothing
Explanation:
The answer is nothing the tempatature isnt matched with the degrees this is false
You measure the absorbance of your extracted curcumin solution and realize that the solution is too concentrated. What made you realize this
If the absorbance of a solution of curcumin which is too concentrated is measured, the absorbance will be unusually high.
Spectrometry measures the interaction of light with molecules. The absorbance refers to how much light that interacts with molecules of the substance. The more the concentration of the substance the higher the absorbance of the solution.
Hence, if the absorbance of a solution of curcumin which is too concentrated is measured, the absorbance will be unusually high. An unusually high absorbance tells us that the solution is too concentrated.
Learn more: https://brainly.com/question/13440572
2 nitrogen atoms and five chlorine atoms what compound does that make
Answer:
dinitrogen pentachloride
Which stage of a fire can be described as follows: The flames are not visible and the combustible item no longer generates heat or combustion products
Fire extinguishment is referred to the stage in which flames are not visible
and the combustible item no longer generates heat.
This stage refers to when the fire has been put out through a fire
extinguisher or other compounds. When fire is put out, there is no longer
flames present.
The absence of flames also means that there is no heat generation or
combustion products due to the absence of a heat source.
Read more on https://brainly.com/question/24313137
A buffer was prepared by mixing 1.00 mole of ammonia and 1.00 mole of ammonium chloride to form an aqueous solution with a total volume of 1.00 liter. To 500 mL of this solution was added 30.0 mL of 1.00 M NaOH. What is the pH of this solution?
Answer:
Idek sorry
Explanation:
So sorry i think its 1.00
hydrogen bond is a strong dipole interaction for example water and other molecules true or false
Answer:
hydrogen bond is a type of dipole-dipole interaction; it is not a true chemical bond it is a mere electrostatic attraction. These attractions can occur between molecules or within different parts of a single molecule. Intramolecular hydrogen bonds are those which occur within one single molecule.
Explanation:
CAN I GET BRAINLIEST
please i need this now ill give you brainlest
Answer: The following information should be included;
What is the difference between the greenhouse effect, climate change and global warming?
What proof do we have that climate change is happening?
Why is it happening?
Which option correctly describes the relative charges and masses of the subatomic particles?
Answer:
D
Explanation:
D Is The Answer Fella, My Head Hurt Really Bad
How many carbon dioxide molecules and water molecules are needed to make one molecule of glucose?
Answer:
It takes six molecules of carbon dioxide and six molecules of water to make one molecule of glucose.
The concept that the total amount of energy remains the same is called.
Answer:The law of conservation of energy
Explanation:
states that the total energy is constant in any process. Energy may change in form or be transferred from one system to another, but the total remains the same.
GIVING BRAINLY AND 20 POINTS
A sound wave in air has the wavelength of 1.36 m. Calculate its frequency? Assume the speed is 340 m/s.
Answer: the answer is 0.074Hz
Explanation:
Given, (In air)
Velocity V=340m/s
Frequency f=20,000Hz
Wavelegth λ=?
V=f.λ
λ=
F
V
=
20,000
340
=0.017Hz
Also, Given (in Water)
Velocity, V=1480m/s
Frequencyf=20,000Hz
wavelength, λ=?
V=F.λ
λ=
F
V
=
20,000
1480
=0.074Hz
Answer:
frequency
Explanation:
frequency is velocity/ wavelength
340/1.36
250
The strongest intermolecular interactions between propanol (CH3CH2CH2OH) molecules arise from hydrogen bonding
a. True
b. False
The claim that the strongest intermolecular interactions between propanol molecules arises from hydrogen bonding is True.
Intermolecular forces are weaker attraction forces that are utilized to define physical characteristics of molecules such as:
boiling point temperature densitymelting pointsHydrogen bonding is an type of intermolecular forces.
It is a type of dipole-dipole interaction that only happens when a hydrogen atom is connected to the atomic element of oxygen, nitrogen, or fluorine.
From the question given, in the propanol (CH3CH2CH2OH) molecule, the hydrogen usually has a partially positive charge which attracts the partially negative charge of the oxygen.
Therefore, we can conclude that the claim is True.
Learn more about Hydrogen Bonding here:
https://brainly.com/question/10904296?referrer=searchResults
In a reaction, 0.209 moles of gas is evolved. Given that the pressure is 0.669 atm and the volume of the gas is 7.30 L, calculate the
temperature of the gas in Kelvin, giving your answer to three significant figures.
The value of R is 0.0821 L'atm-K-1.mol-1
Temperature =
Kelvin
Potassium sulfate has a solubility of 15g/100g water at 40 Celsius. A solution is prepared by adding 39.0g of potassium sulfate to 225g water, carefully heating the solution, and cooling it to 40 Celsius. A homogeneous solution is obtained. Is this solution saturated, unsaturated, or supersaturated? The beaker is shaken and precipitation occurs. How many grams of potassium sulfate would you except to crystallize out?please help me to understant this
Answer:
5.25 grams of potassium sulfate will get crystallize out.
Explanation:
Solubility of potassium sulfate at 40 °C = 15 g/100 g
This means that at 40 °C 15 g of potassium sulfate will get completely dissolved in 100 of water.
39.0 g of potassium sulfate to 225 g water, carefully heating the solution.
Amount of potassium sulphate will get dissolve in 225 g of water at 40 °C will be:
[tex]\frac{15g}{100g}[/tex] × 225 = 33.75g
Amount of potassium sulfate precipitated out by the solution:
= 39.0 g-33.75 g = 5.25 g
At 40 °C 5.25 g of potassium sulfate will get precipitate out from the solution which means that solution is saturated.
Saturated solution are solution in which solute is dissolved in maximum amount. Further addition of solute results in precipitation of solute form the solution.
5.25 grams of potassium sulfate will get crystallize out.
(Hope this Helps can I pls have brainlist (crown)☺️)
What is the kinetic energy of a mole of Ar atoms moving with a speed of 650m/s
Molar mass of Argon, Ar = 39.95 g Mass of 1 atom, m = 39.95 / (6.023 * 10^23) = 6.64 * 10^(-23) g =6.64 * 10^(-26) Kg Now, Kinetic Energy, KE = (1/2) * m * v^2 where velocity,v = 650 m/s Mass of 1 atom, m = 6.64 *...
- BRAINLIEST answerer
Answer:
1.40×10-20
Explanation:
Oh calculate the mass of 1 atom of argon the molar mass of argon 39.95g that is 6.0²×10²³atoms maybe...?
Radio waves bounce off of _____________ before returning to Earth
Answer: ionosphere
Explanation: First it bounces off a top layer of the atmosphere called the ionosphere, then it bounces back to the Earth (this is reflection. It then bounces up again to the ionosphere, and continues bouncing back again until it reaches the radio receiver. This is called a skywave, which works around 3 to 30 MHz.
Find the volume of 0.170 M sulfuric acid necessary to react completely with 72.2 g sodium hydroxide.
The volume of sulphuric acid, H₂SO₄ needed for the complete reaction with 72.2 g of sodium hydroxide, NaOH is 5.31 L
We'll begin by calculating the number of mole in 72.2 g of NaOH. This can be obtained as follow:
Mass of NaOH = 72.2 g
Molar mass of NaOH = 23 + 16 + 1 = 40 g/mol
Mole of NaOH =?Mole = mass / molar mass
Mole of NaOH = 72.2 / 40
Mole of NaOH = 1.805 mole Next, we shall determine the number of mole of H₂SO₄ needed to react with 1.805 mole of NaOH.2NaOH + H₂SO₄ —> Na₂SO₄ + 2H₂O
From the balanced equation above,
2 moles of NaOH reacted with 1 mole of H₂SO₄.
Therefore,
1.805 mole of NaOH will react with = 1.805 / 2 = 0.9025 mole of H₂SO₄.
Finally, we shall determine the volume of H₂SO₄.Mole of H₂SO₄ = 0.9025 mole
Molarity of H₂SO₄ = 0.170 M
Volume of H₂SO₄ =?Volume = mole / Molarity
Volume of H₂SO₄ = 0.9025 / 0.170
Volume of H₂SO₄ = 5.31 LThus, the volume of H₂SO₄ needed for the reaction is 5.31 L
Learn more: https://brainly.com/question/14356462
5. If 10.0 gram of aluminum chloride are decomposed, how many molecules of Cl, are
produced?
Answer: 6.77*1022 Molecules
Explanation: :)
A mixture is made of 40 ml of salt water to 200 ml of solution. What percent of the solution is salt water?
Answer:
16.7%
Explanation:
40 ml of salt water + 200 ml of solution = 240 ml
40/240 = 4/24 = 1/6=16.7%
Calcium has an electronegativity value of 1.0.
Oxygen has an electronegativity value of 3.5.
What type of bond will form between the two atoms?
Answer:
ionic bond
Explanation:
Calcium gives its two valence electrons to oxygen and forms an ionic bond with oxygen. An ionic bond formed when one atom transfers one or more electrons from itself to its neighboring atom, and an ionic bond formed between the two atoms of the compound.
which mass movement does this describe?
Answer:
landslide mudflows slump and creep
Explanation:
no explanation
Consider the case where a closed vessel initially is filled with 1 mol of EE at 88 kPa. Then, pure EtOH is gradually added to the system at constant temperature and pressure until the system is comprised of 1 mol EE and 9 mol EtOH. Describe how the phase behavior and phase composition change throughout this process. Does the system phase separate at any point
Answer:
chu papi
Explanation:
Cómo se forma un enlace polipeptido?
he hybridization of carbon in diamond is _________. Enter your answer with no superscripts or subscripts, i.e., ab3.
Diamond is composed of hexagonal rings in which sp3 hybridized carbon atoms are linked together.
Hybridization refers to the mixing of atomic orbitals to yield hybrid orbitals that are suitable for bonding. The energy of orbitals that combine to form hybrid orbitals must be close enough for such combination to take place.
Diamond is composed of hexagonal rings in which sp3 hbridized carbon atoms are linked together. Each carbon atom in diamond is tetrahedral.
Learn more: https://brainly.com/question/967776
The mixing of the two different orbitals to form a compound is called hybridization. For example mixing of s and p orbits.
The correct answer is sp3.
The arrangement of the elements in a different manner to form a new compound is called allotropes. For example, diamond and graphite are the allotropes of carbon.
The valence electrons are in p orbitals and p orbit mixed after the s orbitals.
Therefore, the correct answer is sp3
For more information, refer to the link:--
https://brainly.com/question/3523174
If 38.6 grams of iron react with an excess of bromine gas, what mass of FeBr2 can form?
Answer:
›› FeBr2 molecular weight. Molar mass of FeBr2 = 215.653 g/mol. This compound is also known as Iron(II) Bromide. Convert grams FeBr2 to moles or moles FeBr2 to grams. Molecular weight calculation: 55.845 + 79.904*2 ›› Percent composition by element
Explanation:
If 38.6 grams of iron react with an excess of bromine gas, the mass of FeBr2 can form is 149 grams.
What is mass?Mass is defined as a way to gauge how much matter there is in a substance or thing. The kilogram (kg) is the fundamental SI unit of mass, while lower masses can also be measured in grams (g). Atoms make up everyday matter. A majority of an atom's mass is contained in its nucleus.
Given Fe = 38.6 g.
Fe has a molar mass = 55.845 g/mol.
Given mass/molar mass equals 38.6g/55.845gmol-1, or 0.6912 moles of iron.
The reaction is described as Fe + Br2 FeBr2.
One mole Fe yields 1 mole of FeBr2.
FeBr2 would be produced from 0.6912 moles of Fe.
FeBr2 has a molar mass of 215.65 g/mol.
Moles of FeBr2 x Molar mass of FeBr2
= 215.65 g/mole x 0.6912 mole
= 149.06 g FeBr2 produced is the formula.
Thus, if 38.6 grams of iron react with an excess of bromine gas, the mass of FeBr2 can form is 149 grams.
To learn more about mass, refer to the link below:
https://brainly.com/question/19694949
#SPJ2
guys help me, please
Answer:
radiation, conduction, convection, conduction
Answer:
radiation , conduction, convection, conduction
QUESTION 5
How can you increase the kinetic energy of the particles in a substance?
Answer: A rise in temperature increases the kinetic energy and speed of particles; it does not weaken the forces between them. The particles in solids vibrate about fixed positions; even at very low temperatures. Individual particles in liquids and gases have no fixed positions and move chaotically.
Answer:
energy kinetic particles in substance
Name the following Type 3 compound
1. PCIE
2. P406
3. SF6
4. SO3
5. SO2
6. N203
7. SiO2
8. O2F2
9. XeF6
Answer:
32
Explanation:
For the given reactions determine if the entropy increases or decreases.
A) 2 KClO3 (s)⇌2 KCl (s)+3 O2 (g)
B) CoCl2 (s)+6 H2O (g)⇌CoCl2⋅6H2O
Entropy increases in reaction 1 due to increase in the number of particles while entropy decreases in reaction 2 due to decrease in the number of particles.
Entropy refers to the degree of disorderliness in a system. The higher the entropy, the more disorderly the system is and the lower the entropy, the less disorderly the system is. We must note that entropy increases with increase in the number of particles.
In the reaction, 2 KClO3 (s)⇌2 KCl (s)+3 O2 (g), entropy increases because one of the products is a gas and the number of particles increases from left to right. In the second reaction, CoCl2 (s)+6 H2O (g)⇌CoCl2⋅6H2O, entropy decreases because the number of particles decreases.
Learn more: https://brainly.com/question/14281129
plate tectonics-1.gif
What is the above image a representation of?
Answer:
Subduction Process where the oceanic plate subducted under the continental plates because it denser than the Continental plate.
Which of the following best describes the scientific exploration of the atom?
