Can you please do this for me I’ll do 75 points

Answer:

The answer is 15. Step by step is you times 80 by 65 and then you divided by 2 and you call your teacher

Answer:

Main Difference Between Mechanical and Electromagnetic waves

A wave is composed of some kind of disturbance that propagates. We can classify waves into many different types based on their properties. One of the properties of the waves depends on whether they need a medium to propagate or not. The primary difference between electromagnetic and mechanical waves is also based on this property. Mechanical waves need a medium, while electromagnetic waves do not need a medium to propagate. Electromagnetic waves can travel through a vacuum. The other differences between mechanical and electromagnetic waves are given below:

Electromagnetic waves can travel through a vacuum, that is an empty space, whereas mechanical waves cannot. They need a medium to travel such as water or air. Ripples in a pond are an example of mechanical waves whereas electromagnetic waves include light and radio signals, which can travel through the vacuum of space.

Mechanical waves can be classed as elastic waves because their transmission depends on the medium's (water, air etc.) elastic properties.

Electromagnetic waves are caused because of the varying magnetic and electric fields. They are produced by the vibration of the charged particles.

Because of these differences, the speed of each type of wave varies significantly. Electromagnetic waves travel at the speed of light but mechanical waves are far slower.

                                                                            Have a wonderful day!

                                                                                                ~Lillith of brainly~

Answer:

3h/4

Explanation:

At speed v/2 height will be 3/4 h

Equation that describes the motion of point , bodies , and system of bodies without considering the force that cause them to move is called equation of motion in kinematics

When block is at top of first ramp

u=0 ( block was at rest )

a = g ( acceleration due to gravity

using equation of motion                                                                                                                                                                                                                                                                    

2as = v^2 - u^2

2gh = v^2

Then the block continued and reached a speed of v1 = v/2 on second ramp

now , final velocity = v= v1 =[tex]\sqrt{2gh}[/tex] / 2

u= [tex]\sqrt{2gh\\}[/tex]

s= h1

using equation of motion , we get

2as = v^2 - u^2

2(-g)h1 =( [tex]\sqrt{2gh}[/tex]/2)^2 - [tex]\sqrt{2gh}[/tex]

2(-g)h1 = (g h - 4 g h) / 2

h1 = 3/4 h

At speed v/2 height will be 3/4 h

learn more about equation of motion in kinematics:

https://brainly.com/question/14355103?referrer=searchResults

#SPJ2

Answer:

I don't understand your language

Answer:

21

Explanation:

9+10=21

Answer:

Climate Change

Ito ang pagbabago sa normal na panahon sa isang lugar. Maaaring abnormal na pagbabago sa ulan na nattanggap ng isang lugar sa isang taon o ang abnormal na pagbabago sa init ng panahon.

Paano masusulusyunan ito?

Tanggalin sa pagkakasaksak ang mga gadgets kapag puno na

Huwag pumutol ng mga puno

Iwasan ang pagsakay sa transportasyon kung malapit lang ang pupuntahan

Explanation:

pa brainliest

The heat released by the aluminum during the process is [tex]3.6 \times 10^6 \ J[/tex].

The given parameters:

The heat released by the aluminum during the process is calculated as follows;

[tex]Q = mc \Delta t \\\\Q = 1.5\times 900 \times (2700 - 23)\\\\Q = 3.6 \times 10^6 \ J[/tex]

Thus, the heat released by the aluminum during the process is [tex]3.6 \times 10^6 \ J[/tex].

Learn more about heat capacity here: https://brainly.com/question/21406849

Answer:

answer

transverse waves

Answer:

5.6

Explanation:

Not so sure

Answer:

138

Explanation:

(since there's a blank next to "9x y j", I'm assuming the y of F(x, y) is 9x[tex]\sqrt{y}[/tex] j)

1) find the partial derivative of each:

[tex](6y^{\frac{3}{2} })i + (9x\sqrt{y} )j[/tex]  

 [tex]f_{x} =(6y^{\frac{3}{2} })_{x} = \int\limits{6y^{\frac{3}{2} }} \, dx = 6xy^{\frac{3}{2} } +c \\\\f_{y} = (9x\sqrt{y} )_{y} = \int\limits{9xy^{\frac{1}{2} } } \, dy = 9x(\frac{2}{3} )y^{\frac{3}{2} } +c = 6xy^{\frac{3}{2} } +c[/tex]

2) use partial integrals to make gradient of f:

take whatever you got from partial integral and add them together (if they repeat, just use it once)

[tex]F =[/tex] Vf (V = gradient of)

[tex]F(x, y) = 6xy^{\frac{3}{2} }[/tex]

3) Evaluate the integrals with given points:

Integral of F dotted with dr = F(point B) - F(point A) = F(3, 4) - F(1, 1)

[tex]F(point B) = 6(3)(4)^{\frac{3}{2} }\\F(Point A) = 6(1)(1)^{\frac{3}{2}}\\F(point B) - F(pointA) = 6(3)(4)^{\frac{3}{2} }-(6(1)(1)^{\frac{3}{2}})[/tex]

= 144 - 6 = 138 units of work

Work done by the force field F in moving an object from A to B = 138 J

Given data :

Force field F(x,y) = [tex]6y^{\frac{3}{2} }i + (9x\sqrt{y} ) j[/tex]  

Step 1 : determine the partial derivatives of the vector quantity

Fx = ∫ [tex]6y^{\frac{3}{2} }i = 6xy^{\frac{3}{2} } + c[/tex]

Fy = ∫ [tex](9x \sqrt{y})_{y} = 9x(\frac{2}{3})y^{\frac{3}{2} } + c[/tex]

Equating the partial derivatives :  

[tex]9x(\frac{2}{3})y^{\frac{3}{2} } + c[/tex]  = [tex]6xy^{\frac{3}{2} } + c[/tex]

therefore the gradient of F  i.e. F = vF  = F( x,y ) = [tex]6xy^{\frac{3}{2} }[/tex]

Next step : Determine the work done

Work done ( F.dr ) = [ F(point b ) = F( 3,4 ) ]  - [ F(point A) = F( 1,1 ) ]

F(3,4 ) = 6(3)(4)[tex]^{\frac{3}{2} }[/tex]  = 144

F( 1,1 )  = 6(1)(1)[tex]^{\frac{3}{2} }[/tex]    = 6

Therefore the work done by the force field = 144 - 6 = 138 J

Hence we can conclude that the work done by the force field F is = 138 J

Learn more about work done : https://brainly.com/question/21854305

h =(3.7 - .58)m  = 3.12m

Now put PE into KE and we have to use the formula:

√2gh (g = gravity and h = height) therefor:

√2 x 9.8 x 3.12

= 7.82m/s

I hope this helps!

100000 Pascal

Explanation:

pressure= force/area

Max pressure= force/min area

so f=5

min area= 5×10^-5

5÷5*10^-5 = 100000pascal

The distance the car has skidded if it had been moving at 40.0 m/s is 27.2m

The linear force acting on the car is opposed by the frictional force. Hence;

[tex]F=F_f[/tex]

[tex]ma = -\mu R\\ma =-\mu mg[/tex]

m is the mass of the car

a is the acceleration

[tex]\mu[/tex] is the coefficient of friction

R is the normal force

Given the following parameters

[tex]a=-\mu g[/tex]

[tex]a =-0.75(9.8)\\a=-7.35m/s^2[/tex]

Get the distance the car has skidded if it had been moving at 40.0 m/s

[tex]v^2=u^2+2as[/tex]

[tex]0^2=20^2+2(-7.35)s\\0=400-14.7s\\s=\frac{400}{14.7}\\s= 27.2m[/tex]

Hence the distance the car has skidded if it had been moving at 40.0 m/s is 27.2m

Learn more here: https://brainly.com/question/15246552

Answer:

OK sure why not!!!!!!!!!!!!

Answer:

Fnet = 5 Newton

Explanation:

Fnet = 10 N - 5 N

Fnet = 5 N

This question involves the concepts of the induced emf, magnetic field, and angular frequency.

The maximum emf induced in the coil is "32.68 volts".

The following formula can be used to find out the induced emf in the coil.

[tex]E =N\omega AB\ Sin(\omega t)[/tex]

But, for maximum induced emf sin function should have a value of 1. Therefore,

[tex]E = N\omega AB[/tex]

where,

E = induced emf = ?

N = No. of turns in the coil = 310 turns

ω = angular frequency = 12.2 rad/s

A = Area of coil = (0.075 m)(0.18 m) = 0.0135 m²

B = magnetic field = 0.64 T

Therefore,

[tex]E=(310)(12.2\ rad/s)(0.0135\ m^2)(0.64\ T)[/tex]

E = 32.68 volts

Learn more about induced emf here:

https://brainly.com/question/18441805?referrer=searchResults

Answer:

do your work why you in class and you would know

Explanation:

Answer:

relating to or supporting democracy or its principles.

Explanation:

Answer:

Row A is correct

Explanation:

both conduction and convection require mass to complete any heat transfer. A vacuum contains no mass

Answer:

newtons per coulomb

We have that for the Question "(a) what multiple of the maximum charge is on the capacitor and (b) what multiple of the maximum current is in the inductor"  

Answer:

From the question we are told

In an oscillating LC circuit, when 86.6% of the total energy is stored in the inductor's magnetic field

A) When 86.6\% energy is stored in inductor

[tex]\%[/tex]of energy stored in electric field = [tex]1 - 0.866 = 13.4\%[/tex]

[tex]\frac{V_E}{V} = \frac{\frac{q^2}{2c}}{\frac{Q^2}{2c}} = 0.134\\\\\frac{q}{Q} = \sqrt0.134\\\\\frac{q}{Q} = 0.366\\\\q = 0.366Q_{max[/tex]

B)

[tex]\frac{V_B}{V} = \frac{\frac{Li^2}{2}}{\frac{LI^2}{2}} = 0.866\\\\\frac{i}{I} = \sqrt0.866\\\\\frac{i}{I} = 0.931\\\\i = 0.931I_{max[/tex]

For more information on this visit

https://brainly.com/question/23379286

Answer:b

Explanation:

Answer:

The lobster let the claw go. so, B.

Explanation:

i hope this helps.

Answer:

It should just be A

Explanation:

I dont see the difference between these 2 but ill choose A and update you

Answer:

A: racket, air

Explanation:

Answer:

Higher its Energy

Explanation:

Answer:

Explanation: If the engines in both of the airplanes are at the same Weight  then The engines in both of the airplanes would stil have the same mass because mass stays the same everywhere

Since mass is constant everywhere, if the engines in both airplanes are at the same weight, the engines in both airplanes would still have the same mass.

Weight is the force an object exerts, mass is the amount of matter that makes up an object. Newton is the SI unit of weight while kilogram is the SI unit of mass.

Given that in question the same type of engine is placed in two different air-planes The first air-plane is twice as heavy as the second Suchane Wrich statement is correct about the mass of the air-plane and its acceleration, assuming a constant net force.

Increasing the acceleration of the air-plane causes the enging to provide more force.

To learn more about acceleration refer to the link:

brainly.com/question/12550364

#SPJ5

Answer:

30.3 meters, 172 degrees

Explanation:

To insure the most accurate solution, this problem is best solved using a calculator and trigonometric principles. The first step is to determine the sum of all the horizontal (east-west) displacements and the sum of all the vertical (north-south) displacements.

Horizontal: 2.0 meters, West + 31.0 meters, West + 3.0 meters, East = 30.0 meters, West

Vertical: 12.0 meters, North + 8.0 meters, South = 4.0 meters, North

The series of five displacements is equivalent to two displacements of 30 meters, West and 4 meters, North. The resultant of these two displacements can be found using the Pythagorean theorem (for the magnitude) and the tangent function (for the direction). A non-scaled sketch is useful for visualizing the situation.

Applying the Pythagorean theorem leads to the magnitude of the resultant (R).

R2 = (30.0 m)2 + (4.0 m)2 = 916 m2

R = Sqrt(916 m2)

R = 30.3 meters

The angle theta in the diagram above can be found using the tangent function.

tangent(theta) = opposite/adjacent = (4.0 m) / (30.0 m)

tangent(theta) = 0.1333

theta = invtan(0.1333)

theta = 7.59 degrees

This angle theta is the angle between west and the resultant. Directions of vectors are expressed as the counterclockwise angle of rotation relative to east. So the direction is 7.59 degrees short of 180 degrees. That is, the direction is ~172 degrees.

The acceleration of the speedboat relative to the shore is 10m/s²

Acceleration is the change in velocity of an object with respect to time. Mathematically;

Acceleration = change in velocity/Time

Change in velocity = 50 - 20

Change in velocity = 30m/s

Time = 3secs

Substitute into the formula to have:

acceleration = 30/3

acceleration = 10m/s²

Hence the acceleration of the speedboat relative to the shore is 10m/s²

Learn more here: https://brainly.com/question/24175401

Answer:

I think that the answer is 4.318 as a=f/p

Answer:

destroy

Explanation:

cuz if anyhow throw rubbish, it will affect/destroy the world environment

Answer:

bathing regularly 2pollute 3 throwing waste in land water water pollution

Answer:  62.25

Explanation: F = ma

F = 7.5 * 8.3

F = 62.25

Thus, the answer is 62.25 Newtons.

Would appreciate brainliest <3