Answer:
Chronic Condition or Long-term Illness
Explanation:
They can also be known as Chronic Conditions or Long-Term Illnesses, hope this helps.
Answer:
Chronic condition, also called long-term condition.
Explanation:
1. Wha' is the relationship between potential and kinetic energy?
As potential energy increases, kinetic energy increases.
b. As potential energy increases, kinetic energy decreases.
C. As potential energy decreases, kinetic energy decreases.
d. Potential and kinetic energy are two separate things and have no
relationship.
Answer:
B
Explanation:
The kinetic energy in an object is converted into potential energy. This makes the kinetic decrease, while the potential increases.
When a baseball curves to the right (a curveball) , air is flowing faster over the right side than over the left side. at the same speed all around the baseball, but the ball curves as a result of the way the wind is blowing on the field. faster over the left side than over the right side. faster over the top than underneath.
Answer:
faster over the left side than over the right side.
Explanation:
due to ball rotation, the right side is more closely matched to the speed of the air passing by as the ball progresses. This causes the air to stick more closely to the right side of the ball and that air stays with the ball surface as the spin moves it to the back of the ball and therefore leftward. As every action has an equal and opposite reaction the leftward force moving air causes the ball to experience an equal rightward force.
When the baseball curves to the right (a curveball), then the ball moves faster over the left side than over the right side.
What direction does a curveball move?The ball, which is thrown with a spin, is curve in the direction in which the front of the ball turns.
When a baseball curves to the right (a curveball),
For this condition, the pressure of air should be high on the left side than the pressure on right side.Molecules of the air on right side pushed backward by this spinning ball.The left side with high pressure push the ball towards right side where the pressure is low.Due to higher pressure, the ball move faster on the left side than the right side.Hence, when the baseball curves to the right (a curveball), then the ball moves faster over the left side than over the right side.
Learn more about the curveball movement here;
https://brainly.com/question/1052138
define parking orbit?
Answer:
An orbit of a spacecraft from which the spacecraft or another vehicle may be launched on a new trajectory.
Hey there!
having a question which is from ( JEE Advanced 2014 )
[tex]\huge\color{black}\boxed{\colorbox{pink}{Question♡}}[/tex]
A rocket is moving in a gravity free space with a constant acceleration of 2 −2 along +x direction (see figure). The length of a chamber inside the rocket is 4 m. A ball is thrown from the left end of the chamber in +x direction with a speed of 0.3 −1 relative to the rocket. At the same time, another ball is thrown in –x direction with a speed of 0.2 −1 from its right end relative to the rocket. The time in seconds when the two balls hit each other is?
[tex] \\ \\ [/tex]
proper explanation needed~
thankyou~
The time taken for the two balls to hit each other is 8 s.
The given parameters:
Acceleration of the rocket, a = 2 m/s²Length of the chamber, s = 4 mSpeed of the first ball, = V1 = 0.3 m/sSpeed of the second ball, V2 = 0.2 m/sThe time taken for the two balls to hit each other is calculated by applying relative velocity formula as shown below;
[tex](V_1 - (-V_2) )t = s\\\\(V_1 + V_2) t = s\\\\(0.3 + 0.2) t = 4\\\\0.5t = 4\\\\t = \frac{4}{0.5} \\\\t = 8 \ s[/tex]
Thus, the time taken for the two balls to hit each other is 8 s.
Learn more about relative velocity here: https://brainly.com/question/17228388
write the function of alcohol in a alcohol thermometer.
Answer:
Ethanol-filled thermometers are used in preference to mercury for meteorological measurements of minimum temperatures and can be used down to −70 °C (−94 °F). The physical limitation of the ability of a thermometer to measure low temperature is the freezing point of the liquid used.
Fireworks have a very high reaction rate. Describe and explain what could be done to slow down their reaction.
Answer:
Don't light up the firework or put less fire
Explanation:
Using Pharaoh's serpent or "black snake" firework could be done to slow down their reaction.
What are fireworks chemically?Gunpowder is typically made using three reagents: potassium nitrate, carbon, and Sulphur. These kinds of elements are used in a combustion reaction that results in this detonation explosion. You have solid reagents reacting to produce gases in the form of solid potassium carbonate, solid potassium sulphate, nitrogen gas, and carbon dioxide gas.
The numerous metal salts that are added to produce the colours spread out all of that material, which is in a super-heated state. In such extremely intense environment, the metal salts heat up and get "excited," emitting light as a result.
If you want an explosion, you need the chemical reaction to go quickly in order to release a large volume of gas in a brief period of time. You might have a chemical reaction that happens rather slowly, like the Pharaoh's serpent or "black snake" firework.
Find more about fireworks in the link:
https://brainly.com/question/16737516
#SPJ2
A 1200 kg car moves due north with a speed of 15m/s. An identical car moves due east with the same speed of 15m/s what are the direction and the magnitude of the system’s total momentum
a.
The direction of the total momentum is 45°
The momentum of the first car is given by p = mv where m = mass of car = 1200 kg and v = velocity of car = 15 m/sj (since it moves due north).
So, p = mv
= 1200 kg × (15 m/s)j
= (18000 kgm/s)j
Also, the momentum of the identical car, p' = mv' where m = mass of car = 1200 kg and v' = velocity of car = (15 m/s)i (since it moves due east).
So, p' = mv'
= 1200 kg × (15 m/s)i
= (18000 kgm/s)i
So, the total momentum of the system P = p + p'
= (18000 kgm/s)j + (18000 kgm/s)i
= (18000 kgm/s)i + (18000 kgm/s)j
The direction of the total momentum of the system P is gotten from
tanФ = p'/p
= 18000 kgm/s ÷ 18000 kgm/s
= 1
Ф = tan⁻¹(1)
= 45°
The direction of the total momentum is 45°
b.
The magnitude of the total momentum of the system is 25455.84 kgm/s
The magnitude of the total momentum of the system P = √(p'² + p²)
= √[(18000 kgm/s)² + (18000 kgm/s)²]
= (18000 kgm/s)√(1 + 1)
= (18000 kgm/s)√2
= 25455.84 kgm/s
The magnitude of the total momentum of the system is 25455.84 kgm/s
Learn more about total momentum here:
https://brainly.com/question/25635296
Use the diagram of the pulley system to complete the statement.In this pulley system, the pulleys will _____ the mechanical force required to lift the block and will change the _____.
The pulleys will reduce the mechanical force (effort) required to lift the block and will change the mechanical advantage.
The pulley system is a type of simple machine which makes our work easier and faster by overcoming a large load when a small force (effort) is applied to it.
The efficiency of a machine is calculated as follows;
[tex]Eff = \frac{M.A}{V.R} \times 100\%[/tex]
where;
M.A is the mechanical advantage V.R is the velocity ratio[tex]M.A = \frac{load}{effort}[/tex]
The velocity ratio of a pulley system = number of pulleys
The velocity ratio of a pulley system increases with increase in the number of pulleys.
Thus, we can conclude that the pulleys will reduce the mechanical force (effort) required to lift the block and will change the mechanical advantage.
Learn more about velocity ratio of pulleys here: https://brainly.com/question/24785465
I need a short answer ?
Answer:
Explanation:
7a) t = d/v = 100/45cos14.5 = 2.29533...= 2.30 s
7b) h = ½(9.81)(2.29533/2)² = 6.46056... = 6.45 m
or
h = (45sin14.5)² / (2(9.81)) = 6.47 m
which rounds to the same 6.5 m when limiting to the two significant digits of the initial velocity.
5.000 km =
3.125
mi
8.000 fl oz =
mL
Answer:
236.588 mL
Explanation:
The formula for an approximate result is to multiply the volume value by 29.574
[tex]8.000 \times 29.574 = 236.588[/tex]
Is that what you were asking for?
Which sentence states Newton's second law?
Answer:
Force is equal to the change in momentum per change in time.
Explanation:
That situation is described by Newton's Second Law of Motion. According to NASA, this law states, "Force is equal to the change in momentum per change in time. For a constant mass, force equals mass times acceleration." This is written in mathematical form as Force = mass.
The slope of a line on a distant-time graph is
A. distance
B. time
C. speed
Answer:
c. speed
Explanation:
In a distant-time graph the x value is usually the time and the y value is usually the distance.
If slope is the change in y over the change in x, on a distant time graph the slope would be the change in time over the change in distance
Or time / distance.
Time / distance happens to calculate speed.
Thus, the slope of a line on a distant-time graph is speed.
[tex]\huge\textbf{Hey there!}[/tex]
[tex]\large\textbf{The formula for Slope of a line is: }\mathbf{m = \dfrac{rise}{run}}\large\textbf{ whereas it is}\\\large\textbf{equal to/equivalent to }\mathbf{ \dfrac{y_2 - y_1}{x_2- x_1} \ .}\\\\\large\textbf{Basically, the slope of the line is measured with its }\\\large\textbf{\underline{steepness}. The word steepness simply means a}\\\lage\textbf{very sharp slope.}[/tex]
[tex]\large\textbf{On slope of a line on distant-time graph is basically how }\\\large\textbf{ \boxed{\bf FAST} a particular object is.}[/tex]
[tex]\large\textbf{Now, that we got that information out of the way we}\\\large\textbf{can find out our answer.}[/tex]
[tex]\large\textbf{The formula for distance is: }\mathbf{d= \sqrt{(x_2 - x_1)^2 + (y_2 +y_1)^2}}}[/tex]
[tex]\large\textsf{We cannot say that OPTION A isn't your answer because you}\\\large\textsf{cannot calculate slope of a line on a distant-time graph. You}\\\large\textsf{cannot calculate the speed of the object by using that formula.}\\\large\textsf{So, this eliminates Option A. as your answer.}[/tex]
[tex]\large\textbf{The formula of time is: }\mathbf{time = \dfrac{distance}{speed}}[/tex]
[tex]\large\textsf{Yes, it calculates the distance but it doesn't calculate how fast a(n)}\\\large\textsf{object is going. So this eliminates Option B. as your answer.}[/tex]
[tex]\large\textsf{The formula for speed is: }\mathbf{s = \dfrac{d}{t}}\large\textbf{ whereas s = \underline{speed}, }\\\large\textsf{d = \underline{distance} you have \underline{traveled}, \& t = \underline{time} that has}\\\large\textsf{been \underline{elapsed}.}\\\large\textsf{Option C. could possibly be your answer}[/tex]
[tex]\large\textbf{Option C. seems to be the closes to your result than the}\\\large\textbf{to your answer.}[/tex]
[tex]\large\boxed{\text{Therefore, your answer should be: \boxed{\textbf{Option C. Speed}}}}\huge\checkmark[/tex]
[tex]\huge\textbf{Good luck on your assignment \&}\\\huge\textbf{enjoy your day!}[/tex]
~[tex]\frak{Amphitrite1040:)}[/tex]
What is Acceleration?
Answer:
Depends on what are you looking at. All of the following are valid definitions, it just depends on which way you are analizing the problem.
From a kinematics point of view:
Acceleration is, by definition, is a vector quantity that measures the rate of change of the rate of change in position (add brackets if it helps visualizing the idea). This leads to the following different definitions - which are more like means of calculating it
the second derivative of position with respect to time [tex]a = \ddot x= \frac{d}{dt}({\frac d{dt}} x)[/tex];the first derivative of velocity with respect to time [tex]a = \dot v = \frac d{dt} v[/tex].From a dinamics point of view
Acceleration is the effect of a force applied to a body, and measures the ratio of the force applied to a body of mass m and the mass itself (which is another formulation of Newton second law):
[tex]a = \frac Fm[/tex]
Acceleration is the rate of change of velocity
To define acceleration, We need to know more about motion.
Motion: This can be defined as the change in position of a body from one point to another. When an object accelerates, it undergoes motion.
Definition
Acceleration can be defined as the rate of change of velocity. The S.I unit of acceleration is meter-per-squared seconds. (m/s²)
The formula of acceleration is
a = (v-u)/t................. Equation 1⇒ Where:
a = accelerationu = initial velocityv = final velocityt = timeHence, Acceleration is the rate of change of velocity
Learn more about acceleration here: https://brainly.com/question/605631
Which object would have more momentum?
A 2 kg ball rolling at 4 m/s
A 5 kg ball rolling at 2 m/s
(Hint: Use momentum = mass * velocity)
a
Not enough information to determine which ball has more momentum.
b
They have the same momentum.
c
The 2 kg ball will have more momentum.
d
The 5 kg ball will have more momentum.
Answer:
b is the ans......
Explanation:
"b" (and any subsequent words) was ignored because we limit queries to 32 words.
I need ideas of what kind of simple motor i can build and how i can build it. The simple motor MUST spin without using your own force. What materials would i use and how would i create it. what would i create
Answer:
i don't know but my father i think he can't answer this
The surface temperature of our sun is about 5800 K, and the peak of its intensity curve is in the middle of the visible spectrum. Mammals have a body temperature of about 310 K. A star that appears reddish could have a surface temperature of:
Explanation:
i expected to use Stefan's law of heat exchange but the value you gave aren't conclusive.
I should say that the temperature of the star should be close to that of the sun because of the similarity in the intensity curves
Cody hits up food king and uses a scale to weigh the mass of an apple. if the spring potential energy in the scale is .09 j and is spring is stretched 0.6 meters, calculate the spring constant
Answer:
oK so here's what you should do is add .09 and 0.6
Explanation:
A ball is launched as a projectile with initial speed v at an angle θ above the horizontal. using conservation of energy, find the maximum height hmax of the ball's flight. express your answer in terms of v, g, and θθ.
Answer:
Explanation:
I will us θ as the angle above horizontal as I don't know how to make your chosen symbol for angle.
KEy = PE
½m(vsinθ)² = mgh
h = (vsinθ)²/2g
Please help
According to the seismograph recording of an earthquake shown above, we can conclude the following about this particular earthquake:
A.) The P-waves arrived at 24 min, the S- waves arrived at 27 min, the P-waves had a larger amplitude than the S- waves, and therefore the P- waves carried more energy than the S-waves.
B.) The P-waves arrived at 24 min, the S-waves arrived at 27 min, the S-waves had a larger amplitude than the P-waves, and therefore the S-waves carried more energy than the P-waves.
C.) The P-waves arrived at 9hrs 24min, the S-waves arrived at 9hrs 27 min, the P-waves had a larger amplitude than the S-waves, and therefore the P- waves carried less energy than the S-waves.
D.) The P-waves arrived at 9hrs 24min, the S-waves arrived at 9hrs 27min, the S-waves had a larger amplitude than the P-waves, and therefore the S-waves carried more energy than the P-waves.
Answer:
don't know ....?
Explanation:
Please help
According to the seismograph recording of an earthquake shown above, we can conclude the following about this particular earthquake:
A.) The P-waves arrived at 24 min, the S- waves arrived at 27 min, the P-waves had a larger amplitude than the S- waves, and therefore the P- waves carried more energy than the S-waves.
B.) The P-waves arrived at 24 min, the S-waves arrived at 27 min, the S-waves had a larger amplitude than the P-waves, and therefore the S-waves carried more energy than the P-waves.
C.) The P-waves arrived at 9hrs 24min, the S-waves arrived at 9hrs 27 min, the P-waves had a larger amplitude than the S-waves, and therefore the P- waves carried less energy than the S-waves.
D.) The P-waves arrived at 9hrs 24min, the S-waves arrived at 9hrs 27min, the S-waves had a larger amplitude than the P-waves, and therefore the S-waves carried more energy than the P-waves.
We often refer to the electricity at a typical household outlet as being 120 V. In fact, the voltage of this AC source varies; the 120 V is __________.
What is the height of a building (in meters) if it takes a rock 8.2 seconds to drop from it's roof?
Answer:
d = 329.81m
Explanation:
V_f = V_0+a*t
V_f = Velocity final
V_0 = Velocity initial
a = acceleration
t = time
V_f = (0m/s)+(9.81m/s²)*(8.2s)
V_f = 80.442m/s
d = ((V_f-V_0)/2)*t
d = distance
d = ((80.442m/s-0m/s)/2)*(8.2s)
d = 329.81m
A 60.0 kg person jumps onto the floor from a height of 3.0m. Find
the KE of the jumper when she hits the ground.
Answer:
1800 J
Explanation:
GPE= mgh
60*3*10
=1800 J
a plane crashes with a deceleration of 185 m/s. How many g’s is this?
Answer:
26 g's
Explanation:
Hope this helps~
Have a great day
Zero
Magma usually stays below the Earth's
under great pressure.
o mantle
Inner core
outer core
Crust
Answer:
In the inner vote part of the earth
Answer This!!!!!!
I'll give brainliest to whoever gets it right.
Answer:
yes the answer is C. 32.16
Question 4 of 10
What is thermodynamics?
A. The movement of matter
B. The flow of fluids
C. The movement of particles
D. The flow of energy, heat, and work
SUBMIT
Answer:
Explanation:
D.
Thermodynamics is the study of how different types of energy is transferred through the chemical systems
Answer: Thermodynamics is the flow of energy, heat, and work.
Explanation: This is seen in the formula for the first law of thermodynamics, U = Q - W, or “The change of the internal energy of a system (U) is equal to the heat absorbed (Q) minus the work done by that system (W).”
Gravity is what
A 0.98 N.
B 5N.
C 10 N.
D 100 N.
E none of the above
Answer:
C that's 10N I think. not sure though
4. The winding ridge of a screw
Answer:
Thread.
Explanation:
The most common form consists of a cylindrical shaft with helical grooves or ridges called threads around the outside.
Section 1: Basic Energy Relationships
1. Click/tap the Start button and observe the motion. View the bar
charts and the velocity value as the coaster car moves. Complete
the following paragraph by entering total mechanical energy
(ME), kinetic energy (KE), and potential energy (PE). The
labeled locations refer to the graphic at the right.
As the coaster car rolls down the track from A to E, the
________ values decrease and the _______ value
increase and the ________ values remain constant. The
_______ is greatest at point A and smallest at point E.
However, the _______ is smallest at point A and largest
at point E.
Section 2: Hill Design
2. Click/tap on the Bumps tab at the top of the
Interactive. Then drag the grey circles to modify the
track so that it looks like the track design at the right.
Pay attention to the background grid to help with the
design. Note that Dot G is at the same height as Dot E;
make sure that the same is true of your final design.
3. Run the simulation. Does the coaster car travel as high
as point H? ___________ Give an explanation for why
it does or doesn't reach point H.
As the coaster car rolls down the track from A to E, the potential energy values decrease and the kinetic energy value increase and the total mechanical energy values remain constant. The potential energy is greatest at point A and smallest at point E. However, the kinetic energy is smallest at point A and largest at point E.
According the principle of conservation of mechanical energy, as the potential energy decreases, the kinetic energy increases.
[tex]P.E + K.E = M.A[/tex]
At point A, the coater has maximum potential energy.
At point E, the coaster has maximum kinetic energy.
We can fill the blanks as follows;
As the coaster car rolls down the track from A to E, the potential energy values decrease and the kinetic energy value increase and the total mechanical energy values remain constant. The potential energy is greatest at point A and smallest at point E. However, the kinetic energy is smallest at point A and largest at point E.
Based on the principle of conservation of mechanical energy, if the second simulation occurs at the same condition as the first, the height reached by coaster will be same.
Learn more about conservation of mechanical energy here: https://brainly.com/question/6852965
A 5.0 m length of rope, with a mass of 0.52 kg, is pulled taut with a tension of 46 N. Find the speed of waves on the rope
Answer:
Speed of waves on the rope is 21 m/s
Explanation:
Length of the rope (l) = 5.0 m
Mass of the rope (m) = 0.52 kg
Tension in the rope (T) = 46 N
Formula of speed of waves on the rope:
[tex] \bold{v = \sqrt{\dfrac{T}{\mu}}} [/tex]
[tex] \mu [/tex] = Mass per unit length of the rope (m/l)
By substituting the values in the formula we get:
[tex] \implies \rm v = \sqrt{\dfrac{T}{ \dfrac{m}{l} }} \\ \\ \implies \rm v = \sqrt{\dfrac{Tl}{m}} \\ \\ \implies \rm v = \sqrt{ \dfrac{46 \times 5}{0.52} } \\ \\ \implies \rm v = \sqrt{ \dfrac{230}{0.52} } \\ \\ \implies \rm v = \sqrt{442.3} \\ \\ \implies \rm v = 21 \: m {s}^{ - 1} [/tex]
Speed of waves on the rope (v) = 21 m/s
