that B) My color is sickle: I have a drop of water in my body when I was given heat, white powder was formed So who am i Lets identify. Write my chemical molecular formula
Explanation:
i don't understood your question ⁉️
and what do u mean by my color is sickle
A pupil has drawn the electronic structure of fluorine and the diagram is shown below. However,
mistakes have been made. State three mistakes that have been made.
The first shell can only hold 2 electrons, but the pupil placed in 8 electrons.
The second shell can hold up to 8 electrons, but the pupil only placed in 2 electrons.
Flourine only has 9 total electrons, yet there are 10 electrons in the diagram.
Answer:
Explanation:
In the Fluorine atom there are 2 electrons in the innermost shell and 7 i the outer shell.
15. The starting diol for this molecule is
O A. ethanol.
O B. propan-1,3-dioic acid.
O C. propan-1,3-diol.
O D. ethan-1,2-diol.
Hope my answer is helpful to you ☺️
Question 3: Functional Groups
Identify the type of molecule from the name of the molecule.
Answer:
1. Organic Alcohol
2. Ester (specifically acetate ester)
3. Organic Alcohol
4. Carboxylic acid
5. Ketone
6. Ether
7. Amine
Explanation:
You can tell what type it is both from the nomenclature and looking at the functional group on the molecular structure. Hope this helps!
a gas has a volume of 7L and a mass of 4.44*10^5 micrograms. what is it's density
Answer:
Explanation:
D = mass/volume.
for the units, I'll take it in g/L but I don't know which units you want.
4.44*10^5 mg = 0.444 grams.
0.444/7 = 0.0634 g/L
Identify the group number and generic outer electron configuration for a neutral main‑group element with the following two Lewis dot symbols.
X with 1 dot on the top, bottom and right
X with 1 dot on all sides
Answer: Answer to #1 is 3A and ns2np1
Answer to #2 is 4A and ns2np2
Explanation:Group number is the number of valance electrons and generic outer electron configuration has to add up to equal the number of valance electrons
The element in the first diagram is in group 13 while the element in the second diagram is in group 14.
The Lewis structure of an atom of an element is a representation of the number of valence electrons on the outermost shell of the atom of that element. Every group of elements have a generic electron configuration which represents the number of valence electrons contained by atoms of elements in that group.
In the first diagram, the element X belongs to group 3A(13) and has a generic outer electron configuration, ns2np1. In the second diagram, the element X is in group 4A(14) and has outer electron configuration ns2np2.
Learn more: https://brainly.com/question/4147359
Specific heat capacity is _____.
greater for metal than for wood
the amount of heat required to raise the temperature of 1g of a substance 1 oC
represented by the symbol, Q
all of these
Answer:
all of this
Explanation:
Help! Can somebody explain the answer and how they got it?
"Write the equation for the first ionization of potassium."
Answer:
K°(g)* + 419 Kj/mole => K⁺(g) + e⁻
Explanation:
1st ionization step for potassium is the ionization of the 4s¹ electron. This requires 419 Kj/mole energy (endothermic). The reaction equation is ...
K°(g)* + 419 Kj/mole => K⁺(g) + e⁻
*note: Ionization of group IA metals requires they be in gas phase. That is, as shown by the Born-Haber Cycle** for formation of ionic compounds ...
K°(s) + 89.24 Kj/mole => K°(g); then ...
K°(g) + 419 Kj/mole => K⁺(g).
**Recommend review of Born-Haber cycle for formation of ionic compounds.
Research about the factors that influence the climates of these places including effects of Sun on the climate. Please give me fast i need help
Answer:
Distance from the sea, ocean currents, direction of prevailing winds, shape of the land, latitude, temperature, air pressure and distance from the equator.
Explanation:
Distance from the sea, ocean currents, direction of prevailing winds, shape of the land, latitude, temperature, air pressure and distance from the equator are the factors that influence the climates of any region. These factors has a great impact on the climate of a region, those regions which are nearer to the equator experiences hot climate whereas those regions which are far from the equator having cold climatic conditions.
What will happen if we drink liquid nitrogen?
Calculate the amount (in moles) of gas which occupies 250cm³ at STP
Answer:
0.01
Explanation:
volume of 22.4 L (22,400 ml) at s.t.p. 250 ml out of 22,400 ml is 0.01 rounded, therefore I assume that is the answer. About 0.01 mole occupies 250 cm3 at s.t.p.
describe the location of the Philippines
Answer:
Philippines, island country of Southeast Asia in the western Pacific Ocean. It is an archipelago consisting of more than 7,000 islands and islets lying about 500 miles (800 km) off the coast of Vietnam. Manila is the capital, but nearby Quezon City is the country's most-populous city.
Which of the following olosaic structures represents a poskwe 9 protons, 10 mentions and 10 elections 12 protons, 1814 neutrons and 12 elections 12 protons, 12 neutrons and 10 elections
Answer:
migraine
Explanation:
d
PLZ HELP ME WITH MY WORK
For his science fair project, Martin studied the growth of trumpet vines. He grew 20 trumpet vines. All of the conditions were the same, except that he grew 10 in a flower bed without support and 10 in a flower bed near a trellis. The stems of the vines near the trellis twisted around the trellis, and these Yines grew tall and seemed much healthier than the vines grown without a trellis. In fact, four of the vines grown without a trellis died. Which characteristic of living things were the trumpet vines displaying as the stems twisted around the trellis?
A. Movement
B. Response to a stimulus
C. Use of energy
D. Reproduction
Answer:
it's B
Explanation:
Climbing plants require an external support to grow vertically and enhance light acquisition. Vines that find a suitable support have greater performance and fitness than those that remain prostrate. Therefore, the location of a suitable support is a key process in the life history of climbing plants
What exactly is a proton? Is it a member of the periodic table?
The atomic number is the number of protons in the nucleus of an atom. The number of protons define the identity of an element (i.e., an element with 6 protons is a carbon atom, no matter how many neutrons may be present).
What is the valency of halogens?why
Answer:
-1
Explanation:
You go fishing and obtain some lead weights for your trip. Since you are the smartest chemistry student
in the land, you know that lead's density is 11.34 g/mL. If there are 50 weights in a 250. mL box, what is
the mass of each weight?
Pls show work if u can!
Answer:
56.7g
Explanation:
Density = mass/volume
According to this question, some lead (Pb) of certain weights was obtained on a fishing trip. The density of lead is given as 11.34g/mL. If the 50 weights are placed in a 250. mL box, the mass of the lead are as follows:
Density = mass ÷ volume
11.34g/mL = mass/250mL
mass = 250 × 11.34
mass = 2835g
Since the 50 weight of lead weighs 2835g, then the mass of each weight is calculated as follows:
= 2835/50
= 56.7g
Calculate the amount of solute excess out when the 60 gm of saturated solution of
NH4Cl having solubility of 57 at 60 ℃ is cooled to 20 ℃ , the solubility being 35.
Answer:
weight of salt = 90 gram,
solubility = 50
sing formula
solubility of solute =
weightofsolventinsaturatedsolution
weightofsoluteinsaturatedsolution
×100
or 50=
weightofsolventinsaturatedsolutio
90gm
×100
so weight of solvent in saturated solution =
50
90gm
×100=180gm
Hence 180 gm of water is required to prepare a saturated solution.
1a.calculate the relative formula mass of magnesium oxide when the relative atomic masses are O=16 Mg=24
1b.calculate the percentage by mass of magnesium in magnesium oxide
here's the answer to your question
The relative mass of the magnesium oxide (MgO) is equal to 40 g. The percentage by mass of magnesium in MgO is 60 %.
What is the mass percentage?The mass percentage of any element in a particular compound can be calculated from the number of parts by mass of the element in 100 parts by mass of a given compound.
Calculate the molar mass of the given compound by adding the atomic masses of the present elements. Then, the percentage of each element can be determined by dividing the total mass of the element by the molar mass of the compound multiplied by 100.
Given, the molecular formula of magnesium oxide is MgO. The atomic mass of Mg and O is 24 g and 16 g respectively.
The relative formula mass of the MgO = 40 g/mol
The mass percentage of the Mg = (24/40) × 100 = 60 %
Therefore, the mass percentage of the Mg in MgO is equal to 60 %.
Learn more about the mass percentage, here:
brainly.com/question/16750428
#SPJ2
What information does the percent composition of an atom in a molecule
give?
A. The relative number of atoms one element contributes to a
molecule
B. The relative amount of mass an atom contributes to a molecule
C. The total mass that element contributes to a molecule
D. The total number of atoms of that element in a molecule
C.
This is basically the definition of percent composition which is how much mass a element contributes to a specific molecule.
Answer: B.
Explanation:
the relative amount of mass an atom contributes to a molecule
what do you mean by acceleration due to gravity of a body is 10 metre per second square
Answer:
If a body is accelerated by 10m/s^2, it means that the body's speed (or velocity to be precise) is increasing by 10m/s every second. That is, if the initial ...
What is the molarity of a solution made by dissolving 8.60 g of a solid with a
molar mass of 21.50 g/mol in 280.0 mL of solution.
Answer:
1.43 M
Explanation:
We'll begin by calculating the number of mole of the solid. This can be obtained as follow:
Mass of solid = 8.60 g
Molar mass of solid = 21.50 g/mol
Mole of solid =?
Mole = mass / molar mass
Mole of solid = 8.60 / 21.50
Mole of solid = 0.4 mole
Next, we shall convert 280 mL to litre (L). This can be obtained as follow:
1000 mL = 1 L
Therefore,
280 mL = 280 mL × 1 L / 1000 mL
280 mL = 0.28 L
Thus, 280 mL is equivalent to 0.28 L.
Finally, we shall determine the molarity of the solution. This can be obtained as illustrated below:
Mole of solid = 0.4 mole
Volume = 0.28 L
Molarity =?
Molarity = mole / Volume
Molarity = 0.4 / 0.28
Molarity = 1.43 M
Thus, the molarity of the solution is 1.43 M.
Arrange the steps in order to describe how photons and carbon dioxide (CO2) contribute to the warming of Earth.
CO2 in the atmosphere absorbs infrared
photons.
CO2 in the atmosphere emits infrared photons back toward Earth.
Photons from the Sun strike Earth and become infrared photons.
Earth radiates infrared photons into the atmosphere
The Sun radiates sunlight (visible)
photons
The Sun radiates sunlight (visible) photons
Photons from the Sun strike Earth and become infrared photons.
Earth radiates infrared photons into the atmosphere
CO2 in the atmosphere absorbs infrared photons.
CO2 in the atmosphere emits infrared photons back toward Earth.
Certain gases are known to contribute towards global warming. Such gases are called greenhouse gases. The infrared rays from the sun are absorbed by these gases as they are re-emitted from the earth and re-emitted.
The sun radiates photons to the earth which is re-radiated into outerspace from the earth's surface. CO2 and other greenhouse gases absorbs these gases and re-emit them to the earth thereby causing a gradually rise in the temperature of the earth called global warming.
https://brainly.com/question/16148572
Emission and abpsorption spectra from a given atom or molecule can tell us: Group of answer choices the composition of substances, even at great distances away, by identifying its uniques spectral fingerprint. The motion toward or away from us based on the doppler effect and corresponding red shift or blue shift The temperature of an object by using Wien's Law. All of the above.
Answer:
The motion towards or away from us based on the Doppler effect and corresponding red shift or blue shift.
Explanation:
The emission and absorption spectra demonstrates the lines where light has been absorbed by the atoms. The spikes can be observed due to atoms releasing photons at those wavelengths. Infrared and ultra violet waves can be observed during spectroscopy.
Which statements are true in regard to the VSEPR theory?
Select all that apply.
Molecules acquire a shape that results in the greatest charge.
Molecules acquire a shape that minimizes the repulsions of electron groups.
Molecules acquire a shape that maximizes the distance of electron groups.
Molecules acquire a shape that results in the lowest possible energy state.
The correct option is D. 2) Anti-bonding electrons or lone pairs. These lone pairs, and bonds helps to form the shape which keeps these electrons separate as possible.
The process of diffusion can be described as: Movement of water from the area of high concentration of solute to the area of low concentration of solute. Movement of solute from the area of low concentration of solute to the area of high concentration of solute. Movement of water from the area of low concentration of solute to the area of high concentration of solute. Movement of solute from the area of high concentration of solute to the area of low concentration of solute.
Answer:
Movement of water from the area of high concentration of solute to the area of low concentration of solute.
Explanation:
Diffusion can be defined as the movement of gas molecules from a region of high concentration to a region of lower concentration until an equilibrium is attained or reached. This mixing of gas molecules in the liquid or gaseous state is due to their kinetic energy of random motion i.e without requiring bulk motion.
This ultimately implies that, diffusion is a phenomenon through which gas molecules in either a gaseous or liquid state spread out in response to a concentration gradient, which is simply the difference in concentration of the gases across a space.
During diffusion, molecules move from areas of high concentration to areas of low concentration. Also, diffusion does not require energy to move molecules.
Hence, the process of diffusion can be described as movement of water from the area of high concentration of solute to the area of low concentration of solute.
A solute can be defined as a substance that is typically dissolved in a liquid solvent such as water, coffee, tea, etc., to produce a solution.
Assertion: Atomic mass of aluminium is 27 Reason: An atom of aluminium is 27 times heavier than 1 / 12th of the mass of the C – 12 atoms.
Answer:
i is the correct answer.
Explanation:
the RAM of aluminum is indeed 27. And since the RAM of substances are measured in terms of the C-12 isotope then R indeed explains why the RAM Al is 27.
Vitamin C is a water-soluble vitamin, so your body doesn't store it. You have to get the required amount from your diet (citrus fruits are a great source!), or you could take a daily vitamin C supplement pill. Vitamin C is ascorbic acid, so to determine how much vitamin C (acid) has been placed in each pill, you could do an acid-base titration. One vitamin C pill was dissolved in water and titrated to an endpoint by 16.00 mL of a 0.447 M solution of NaOH. How many grams of ascorbic acid were there in the pill? (MW of ascorbic acid is 176.1 /mol). Explain and show your work.
Answer:
Mass of ascorbic acid in the pill = 7.152 x 176.1/1000 = 1.26 g
Explanation:
The mass of ascorbic acid in the pill would be,
1.26 g
Now,
Moles of ascorbic acid = Moles of NaOH = 0.447 M x 16 ml = 7.152 mmol
Mass of ascorbic acid in the pill = 7.152 x 176.1/1000 = 1.26 g
Complete combustion of a 0.350 g sample of a compound in a bomb calorimeter releases 14.0 kJ of heat. The bomb
calorimeter has a mass of 1.20 kg and a specific heat of 3.55 J/(g;°C).
If the initial temperature of the calorimeter is 22.5°C, what is its final temperature?
Use 0= mCOAT
Answer:
i cant understand what you wrote
Explanation:
it's a blank screen
According to the law of conservation of energy, what will most likely happen in a closed system?
Answer:
It is right or wrong I cannot say if it is wrong forgive me.
Answer:
The energy in the system will likely be exchanged, but the matter will not be exchanged.
Explanation:
According to the first law of thermodynamics, also known as Law of Conservation of Energy, energy can neither be created nor destroyed; energy can only be transferred or changed from one form to another. The law of conservation of mass also states that for any system closed to all transfers of matter and energy, the mass of the system must remain constant over time, as the system's mass cannot change.
