How much force is required to move a tractor 60m, when using 250J of work?
Answers
Answer:
Work done,W= 250J
Displacement , s = 60
We know that, Work done = Force x displacement
i.e , W = Fxs
250 J = F x 60m
F = 250/60
=4.16 N
Hence , 4.16 N of Force is applied on the body.
Please find attached photograph for your answer.
Hope it helps.
Do comment if you have any query.
Related Questions
If the depth of water in a well is 10m, what is the pressure exerted by it the bottom of the well ? ( Use g = 10 m/s2)
show the process as well
Answers
Answer:
The precise answer depends on the density and therefore the temperature of the water, but we can obtain a reasonable approximation by assuming that the density of the water is 1000 kilograms per cubic meter (kg/m³).
Since the depth of the water in the well is 10 m, the volume of water directly above an area A of a square meters (m²) at the bottom of the well is 10×a m³.
Since the density of the water is 1,000 kg/m³, the mass of water directly above area A is (1,000 kg/m³) × (10×a m³) = (1000×10×a kg) = 10,000×a kg.
Since g = 9.8 m/s², the force of gravity acting on the water directly above area A is (9.8 m/s²) × (10,000×a kg) = 9.8×10,000×a N (newtons) = 98,000×a N.
So the pressure of water acting on area A is (98,000×a N)/(a m²) = (98,000×a)/a N/m² = 98,000 pascals (pa). And since A could be any given area at the bottom of the well, this is the pressure at any point at the bottom of the well.
So the pressure at the bottom of the well is 98,000 pascals (or 98,000/101,325 standard atmospheres = 560/579 atmospheres ~ 0.967 standard atmospheres).
Please comment below if you have any questions.
Describe at least two similarities between untraviolet rays and microwaves
Answers
Calculate the charge flow if the energy transferred is 5.25 kJ and the potential difference is 15 volts.
Answers
The charge flow if the energy transferred is 5.25 kJ and the potential difference is 15 volts is 350 Coulomb
Potential difference is the amount of work needed to move a unit charge from one point to another. It is given by:
V = E/Q
Where V is potential difference, E is energy and Q is charge. Given that:
V = 15 V, E = 5.25 kJ = 5.25 * 10³ J.
V = E/Q
15 = 5.25 * 10³ /Q
Q = 350 Coulomb
The charge flow if the energy transferred is 5.25 kJ and the potential difference is 15 volts is 350 Coulomb
Find out more at: https://brainly.com/question/3412043
You throw a can of cranberry sauce straight up in the air with an initial velocity of 12 m/s. What is the maximum height the baseball reaches above your head.
Answers
Answer:
Δx=7.35m
Explanation:
This is a free fall problem (g= -9.8 m/s²).
Displacement: ? <--- what you're trying to find (max height)
Initial Velocity: 12 m/s
Final Velocity: 0 m/s <-- since the can will land back in your hands
Time: Missing <-- not needed to solve
Acceleration: -9.8 m/s²
The equation that you will use is vf²=vi²+2aΔx
Now plug the information into the equation!
(0m/s)²=(12m/s)²+2(-9.8m/s²)Δx
Multiply the 2 with the acceleration (-9.8m/s²)
(0m/s)²=(12m/s)²-19.6m/s²Δx
Now you need to square the final and initial velocity
0m/s=144m/s-19.6m/s²Δx
Move 144 to the other side of the equal sign
-144m/s=-19.6m/s²Δx
Divide both sides by -19.6m/s²
7.346m=Δx
You can round it to the tenth or hundreth place, up to you!
For this example, I'll round to the hundredth...
Δx=7.35m
I would double check this answer or review it yourself to see if it's correct.
Good luck with your studies!
In general, a _______ intake manifold produces high torque at _______ engine rpm because of the increased amount of time between the air pulses due to the inertia of the long column of air.
Answers
There are two major types of intake manifold. In general, A long intake manifold produces high torque at lower engine rpm because of the increased time between the air pulses.
Intake Air Heating is made up of different methods that manufacturers do use to heat intake manifolds.
This Heating system on vehicles are often with emission controls, air cleaners use a thermostatic valve to control how much hot air enters the air cleaner.
Conclusively there are two forms of intake manifold. They are the long and short intake manifold.
Learn more from
https://brainly.com/question/4800328
If the acceleration of an object increases, what effect does this have on the Force and Mass?
A Force Increases, Mass Increases
B Force Decreases, Mass Decreases
C Force increases, Mass remains the same
D Force Decreases, Mass remains the same
Answers
Answer:
Force Increases and Mass remains the same.
Explanation:
Explain why position is a dependent variable in a position versus time graph.
Answers
Answer:
Explanation:
The position depends on the time. The longer the time, the further the distance.
Saturn’s moon titan has a mass of 1.35 × 10^23 kg. if titan is 1.19 × 10^6 km from saturn, and saturn’s mass is 5.86 × 1026 kg, what is the gravitational force between saturn and its moon?
Answers
Answer:The gravitational force equation is Fg=(G*M*m)/r² where, G is the gravitational constant, G=6.67*10^-11 m³/kg*s², M is the mass of Saturn, M=5.86*10^26, m is the mass of Titan, m=1.35*10^23 and r is the distance, r=1.19*10^6 km=1.19*10^9 m. Now we simply input the numbers into the equation:
Fg=(6.67*10^-11)*(5.86*10^26)*(1.35*10^23)/(1.19*10^6)²
Fg=(5.277*10^39)/(1.41*10^18)=3.743*10^21 N
The correct answer is the third one.
Explanation:
PLEASE ANSWER NEED HELP!!!!!!!! PLEASE THE CORRECT ANSWER!!!!!!
Having good form is important when sitting but not when sleeping.
A.
True
B.
False
PLEASE NO LINKS
Answers
Answer:
B. false
Explanation:
Because good form is not going to mess up your sitting it might mess up the way you sleep Because you don't know if you going to hurt 8n the moring
The amount of heat that is needed to raise the temperature of 1
kg of some material by 1°C is called the of the material.
a. specific heat
b. state
c. temperature
d. charge
Answers
Answer:
a. specific heat
Explanation:
a. specific heat
Explanation:
The specific amount of heat produced to an object of specific mass is known as specific heat.
What decides free energy.
Answers
Answer: when free energy is extensive property that means its magnitude depends on the amount of a substance.
Explanation:
srry if im wrong :( .
Answer:
state of the system
Explanation:
Gold density = 19.30,
Silver density = 10.49,
Lead density = 11.34.
They have the same mass but are made of different metals. Each one is lowered into a beaker of water. Use the data above to decide which one will cause the biggest rise in water level.
A) Gold
B) Silver
C) Lead
D) All will cause the same rise in water level
Answers
Density of water=1g/cm^3
Now all metals has greater mass in comparison to water.
Higher the mass higher the rise[tex]\\ \sf\longmapsto Density=\dfrac{Mass}{Volume}[/tex]
[tex]\\ \sf\longmapsto Density\propto Mass[/tex]
Higher the density higher the massGold has higher mass hence it will cause the biggest rise.
Option A
Silver will cause biggest rise in water
What is density ?Density of an object is a measure of its mass per unit volume.
density = mass / volume
since all have same mass , so metal which have higher volume will cause the biggest rise in water level .
since , density is inversely proportional to volume , hence material having low density will have higher volume
hence , silver will cause biggest rise in water
correct option B) Silver
learn more about density
https://brainly.com/question/6329108?referrer=searchResults
#SPJ2
Train car A is at rest when it is hit by train car B. The two cars, which have the same mass, stick together and move off after the collision. How does the final velocity of train cars A and B after the collision compare to the initial velocity of train car B before the collision?.
Answers
The value of the final velocity of train cars A and B after the collision compare to the initial velocity of train car B before the collision is [tex]v = \frac{ \ m_bv_b_1}{m_a \ + \ m_b}[/tex].
According to the principle of conservation of linear momentum, the total momentum before and after collision is conversed.
[tex]m_av_a_1 + m_bv_b_1 = v(m_a + m_b)[/tex]
where;
[tex]v_a_1 \ \ and \ \ v_b_1[/tex] are the initial velocity of the cars before collisionv is the final velocity of the cars after collisionsince the train car A is at rest, [tex]v_a _1 = 0[/tex]
[tex]m_bv_b_1 = v(m_a + m_b)[/tex]
The relationship between the final velocity and initial velocity of the cars is given as;
[tex]v = \frac{ \ m_bv_b_1}{m_a \ + \ m_b}[/tex]
Thus, the value of the final velocity of train cars A and B after the collision compare to the initial velocity of train car B before the collision is [tex]v = \frac{ \ m_bv_b_1}{m_a \ + \ m_b}[/tex].
Learn more about conservation of linear momentum here: https://brainly.com/question/22698801
Answer: the answer is the third option. Edge 2021
Explanation: i just answered the problem
The wavelength is 1. 87 x 10-7 m. What is the frequency?.
Answers
Answer:
11.7 im pretty sure. i did the work so it should be correct
if a substance changes from a vapor to a liquid it ____ HELP FAST
Answers
Answer:
Explanation:
Condensing is the word used to indicate the change of state of a substance from vapor to liquid, as in this case. During condensation, the substance releases thermal energy to the environment, therefore the kinetic energy of the molecules in the vapor decreases until they become closer to each other and they start to be affected by the intermolecular forces and so the substance becomes a liquid.
A two-dimensional crystal has a rectangular unit cell, with spacings between the centers of the atoms of 0.5 nm in one direction (e.g., the x direction), and 0.4 nm in the other direction (e.g., the y direction). Presuming that the crystal has 1000 unit cells in each direction, sketch a representative portion of the reciprocal lattice on a scale drawing, showing the dimensions, units, and directions (i.e., kx and ky)
Answers
So directly the cell density value in a rectangle is:
[tex]5*10^{17} cells/cm^{2}[/tex]
In this exercise, we must first calculate the area of the rectangle, remembering that you need to convert from nm to cm is:
[tex]A=B*H\\A=(0.4*10^{-7})*(0.5*10^{-7})= 2*10^{-15}[/tex]
Next, let's calculate the density from the calculated area:
[tex]\frac{N}{A} = \frac{1000}{2*10^{-15} } = 5*10^{17}[/tex]
In this way, the calculation represents that there is:
[tex]5*10^{17} cells/cm^{2}[/tex]
Learn more: brainly.com/question/18320053
describe an experiment that can be used to determine the resistance of a metallic conductor
Answers
Answer:
resistance of the metal conductor at different temperature
Explanation:
An experiment used to determine the resistance of a metallic conductor is the resistance of a metallic conductor at different temperatures.
What is Resistance?Resistance is the property of a conductor to oppose the flow of charges through it which is numerically given as the ratio of the potential difference across its length to the current flowing through it.
Resistance of a metallic conductor is the measure of its opposition to the flow of electric current. Resistance is known to be directly proportional to the temperature which means as the temperature is increased, its resistance increases too and vice versa.
Resistance has an inverse relationship with the cross sectional area of a metallic conductor, so if the resistance increases the cross sectional area decreases and vice versa.
Thus, an experiment used to determine the resistance of a metallic conductor is the resistance of a metallic conductor at different temperatures.
Learn more about Resistance, here:
https://brainly.com/question/15742150
#SPJ2
Lacie kicks a football from ground level at a velocity of 13.9 m/s and at an angle of 25.0° to the ground. You have determined that the football would travel 15.1 m before landing.
How would this value change if the football was kicked at an angle of 35.0°?Complete all equations without rounding and then round to the nearest tenth at the end.
From edge
Answers
Answer:
like 23 or something
Explanation:
What is the net force on a 4,000-kg car
that doubles its velocity from 15 m/s west
to 30 m/s west over 10 seconds?
Answers
Answer:
6000 N toward west
Explanation:
F = ma
a = 30-15/10 = 1.5 m/s^2 towards west
m = 4000 kg
F = 4000 x 1.5 = 6000 N towards west
A cyclist is coasting at 12 m/s when she comes to a muddy stretch with an effective coefficient of friction of 0.60. Will the cyclist be able to get out of the muddy stretch without having to pedal if it lasts 10 meters
Answers
The cyclist will make it since the distance traveled by the cyclist is greater than the length of the muddy stretch.
The given parameters;
speed of the cyclist, u = 12 m/scoefficient of friction, μ = 0.6length of the muddy stretch, L = 10 mThe effective acceleration of the cyclist at the given coefficient of friction is calculated as follows;
[tex]a = \ \mu g\\\\a = 0.6 \times 9.8\\\\a = 5.88 \ m/s^2[/tex]
The distance traveled by the cyclist at the give speed and acceleration is calculated as;
[tex]v^2 = u^2 + 2as\\\\12^2 = 0 + 2(5.88)s \\\\ 11.76 s = 144\\\\ s = \frac{144}{11.76} \\\\a = 12.24 \ m[/tex]
Thus, we can conclude that the cyclist will make it since the distance traveled by the cyclist is greater than the length of the muddy stretch.
Learn more here:https://brainly.com/question/14121363
A mass of 5.00 kg in a gravitational field of 7.00 n/kg. What force acts on the mass?
Answers
Answer:
35N
Explanation:
force=mass×gravity
the mass is 5 and the gravity is 7 therefore:
force=7×5
=35N
I hope this helps
In the experiment shown below, which is greater, the force of gravity on the pith balls (Fg) or the electrostatic force between them (Fq)?
Answers
Answer:
Electronic force
Explanation:
Maybe because its warmer and may have more force
True or False: Objects fall at a constant speed.
Answers
Answer:
Explanation:
true
What is the rotational inertia of the bug-rod-spheres system about the horizontal axis through the center of the rod
Answers
Answer:
C) 5ML^2
Explanation:
2 Spheres of mass M
Bug's mass 3M
Rod length 2L, radius L
Find Rotational Inertia I
I=Σmr^2
I=(3M+M+M)L^2
I=5ML^2
The rotational inertia of the bug-rod-spheres system about the horizontal axis through the center of the rod is 5ML².
Rotational inertia of the systemThe rotational inertia of the system is determined by summing all the masses together and multiply with the radius.
I(t) = Σmr²
Where;
m is the massr is the radiusI(t) = Inertia of the 2 spheres + inertia of the bug
I(t) = (M + M)L² + (3M)L²
I(t) = 2ML² + 3ML²
I(t) = 5ML²
Thus, the rotational inertia of the bug-rod-spheres system about the horizontal axis through the center of the rod is 5ML².
Complete question is below:
There are 2 Spheres of mass M and Bug's mass 3M. The Rod length is 2L, radius L.
Learn more about rotational inertia here: https://brainly.com/question/14001220
If acceleration of a body starting from the rest is 0.5m/s^2 how long will it take the body to travel 400m(if u are genius answer this)
Answers
Answer:
10s
Explanation:
PLEASE ANSWER NEED HELP!!!!!!!! PLEASE THE CORRECT ANSWER!!!!!!
Jose’s doctor recommends that he add more cardio to his exercise routine. Which exercise would be the BEST choice?
A.
ballet
B.
jogging
C.
bowling
D.
volleyball
PLEASE NO LINKS OR I WILL REPORT YOU
Answers
Explanation:
I learned in PE
Answer:
jogging
Explanation:
Jogging is often defined as running at a pace less than 6 miles per hour (mph), and it has some significant benefits for people who want to improve their health without overdoing it.
What is the mass of an object that weighs 20N on earth? Use g=9.8 N/kg
Answers
Answer: Therefore, the mass of the object is 2.222 kg on the Earth, Moon, Saturn, Mercury and everywhere else it goes.
Explanation:
Answer:
the mass is 2.04
Explanation:
The weight of an object is calculated by: W=Mg
Solving for M: M=W/9
M=20/9.8 = 2.04
l. amount of liquid
ll. initial mass of the bone
lll. temperature of liquid
A.
l and lll
B.
II and III
C.
ll only
D.
l only
Answers
A.l and lll
- BRAINLIEST answerer
Suppose that a cart is moving along a road at a constant velocity. Give two examples of ways to cause the cart to decelerate, explaining how the net force is affected. (2 points)
Answers
The cart moving at a constant velocity will decelerate when a braking force is applied or the road is made to become rougher.
Deceleration is also known as negative acceleration. It occurs when velocity decreases with time. There are two ways by which the cart moving at constant velocity can be made to decelerate. These two ways are;
By applying a braking force: A braking force causes the velocity to decrease with time. When a braking force is applied the frictional force exceeds the forward force hence the net force decreases.By increasing the roughness of the road: When the roughness of the road is increased, the frictional force also increases causing the net force on the cart to decrease hence it decelerates.Learn more: https://brainly.com/question/14281129
A potted plant falls from the window of an apartment building. It falls for 2.0
s and then hits the ground. What is the speed of the plant just before it hits
the ground? Assume only gravity is acting on it.
A)20 m/s
B) 9.8 m/s
C) 2.0 m/s
D) 4.9 m/s
Answers
Answer:
D) 4.9 m/s
Explanation:
Speed of Object in Free Fall
s = Rate of Acceleration, Due to Gravity × Length of Time
s = 9.8 × 2.0
s = m/s (Round Up to The Nearest Whole Number)
--
m/s = 9.8 ÷ 2.0 = 4.9 m/s
