Is mass based on gravity?.

Answer:

According to NASA, time travel is possible, just not in the way you might expect. Albert Einstein's theory of relativity says time and motion are relative to each other, and nothing can go faster than the speed of light, which is 186,000 miles per second. Time travel happens through what's called “time dilation.

Explanation:

brainiest

Customers demand to communicate with technology in real time without any delays, hence low latency is essential. Users may stop interacting with a platform due to problems with high latency and time delays.

then switch permanently to a different programme.

One of the biggest causes of user service abandonment is poor latency. To put it clearly, excessive latency can result in enormous losses in revenue and a declining user base. One of the most crucial elements in the success of your application is eliminating latency.

Numerous physical obstacles, such as internet service, internet speed, or particular IP networks, might have an impact on latency. Businesses and IT specialists have consistently developed and implemented methods to enhance network speeds and the overall user experience. This has often taken the shape of data distribution, expanding the global data storage capacity, and enhancing network connectivity.

Learn more about Latency here:

https://brainly.com/question/14264521

#SPJ4

Acceleration is the rate of change of velocity over time. To calculate the acceleration of the shopping cart, you would need to use the formula:

a = (v2 - v1) / (t2 - t1)

where a is the acceleration, v1 is the initial velocity, v2 is the final velocity, t1 is the initial time, and t2 is the final time.

In this case, the initial velocity is 7 m/s at time t = 1s and the final velocity is 28 m/s at time t = 4s. So,

a = (28 m/s - 7 m/s) / (4s - 1s) = 21 m/s^2

So the cart's acceleration is 21m/s^2

To know more about Acceleration

https://brainly.com/question/460763

The angular momentum of a particle rotating around an axis is defined as the moment of the particle's linear momentum around that axis.

Angular momentum is the rotational equivalent of linear momentum in physics. It is an important physical quantity because it is a conserved quantity—in a closed system, the total angular momentum remains constant. Both the direction and magnitude of angular momentum are conserved. The property of any rotating object given by moment of inertia times angular velocity is defined as angular momentum. It is the property of a rotating body determined by the product of the rotating object's moment of inertia and angular velocity.
Here,

The moment of a particle's linear momentum about an axis is defined as its angular momentum. The product of linear momentum and the perpendicular distance of its line of action from the axis of rotation is used to calculate it.

To know more about angular momentum,

https://brainly.com/question/29716949

#SPJ4

The answer is  the momentum after the colliion

m1v1i + m2v2i = m1∗v1f + m2*v2f

What is meant by colliion ?

p = m∗v(mathematical definition of momentum)

p1i + p2i = p1f + p2f

(mathematical formula for conservation of momentum)→

m1v1i + m2v2i = m1 ∗ v1f + m2*v2f

To learn more about  colliion refer to

https://brainly.com/question/29352708

#SPJ4

A light-year is a unit generally used to express the distance that light travels in one year, the distance between two stars can be expressed in light years.

Light-years are units used to express the distance that light travels in a year. Light travels through interstellar space at a speed of 186,000 miles (300,000 kilometers) per second and 5.88 trillion miles (9.46 trillion kilometers) per year.

A light-year is a unit of measurement for distance rather than time (as the name might imply). A light-year is the distance a light beam travels in one Earth year, which is equivalent to roughly 6 trillion miles (9.7 trillion kilometers).

To know more about light-year visit:

https://brainly.com/question/10321474

#SPJ4

Complete question is " A light-year is a unit generally used to express the distance that light travels in one year. Which of these can be expressed in the light years?

A] the age of a rock

B] the distance between two stars

C] the speed at which the earth revolves around the sun

D] the time earth takes to complete a revolution around the sun".

Explanation:

Acc=change in velocity/time

a=30-0 / 6

a =30/6

a = 5m/s^2

Gravitational equation can be solved by knowing the values of universal gravitational constant, masses of both the object, and the distance between them.

According to Newton's law of gravitation, every object in the universe attracts every other object with a force called gravitational force. Gravitation equation defines the gravitational force exerted by two objects on each other. If they are kept apart at some distance.

F = GMm/R²

Where F is the gravitational force between the object, G is the universal gravitational constant, M & m are masses of both the object and R is the distance between the objects. Gravitational force is a vector quantity.

To know more about gravitational constant, here

https://brainly.com/question/858421

#SPJ4

Answer:

Explanation:

To calculate the mass of an object that would reduce Earth's orbital velocity by even a hundredth of a percent, we need to use the conservation of momentum principle. According to this principle, the total momentum of a system remains constant if no external forces act on it.

In this scenario, we can consider the Earth and the object as a closed system. The initial momentum of the system is Earth's momentum, and the final momentum is Earth's momentum after the collision.

Let's assume the mass of the Earth is M_E and the initial velocity of Earth is V_E. After the collision with the object, the final velocity of Earth is V_E' . The mass of the object is M_O, and its velocity is V_O (twice Earth's velocity)

The conservation of momentum principle states that:

M_E * V_E = M_E * V_E' + M_O * V_O

To reduce Earth's orbital velocity by even a hundredth of a percent, we can assume that V_E' = V_E - (0.0001 * V_E)

Therefore,

M_E * V_E = M_E * (V_E - (0.0001 * V_E)) + M_O * (2 * V_E)

Rearranging this equation we can find the mass of the object M_O

M_O = M_E * (V_E / (2 * V_E - 0.0001 * V_E))

To get the exact mass of the object, we need to know the mass of the Earth and the velocity of Earth, which are not provided in the question. However, this calculation will give an approximate mass that the object would need to have in order to reduce Earth's orbital velocity by even a hundredth of a percent.

the effort done is 300 joules when a 100 lb rock is raised to a height of 3 ft, according to the work done calculation.

How much work has been done?

It should be converted to energy in order to move an object. Energy can be transferred by the use of force. Work done refers to the amount of energy used by a force to move an object.

What exactly is a physics "work done"?

When an object is moved over a distance by an external force, at least a portion of that force must be applied in the direction of the displacement. This is known as work in physics.

To know more about work done visit:

brainly.com/question/30073908

#SPJ4

Momentum is a moving body's quantity of motion, measured as the product of its mass and velocity. It is calculated as mass *velocity.

Momentum is defined as the quantity of motion of a body. It is measured by "mass velocity," since momentum is affected by velocity and the direction of the body's motion. Because velocity is a vector and mass is a scalar variable, momentum is a vector quantity. Momentum is defined as mass multiplied by velocity. The definition of momentum is "mass moving." Because all objects have mass, when they move, they have momentum - their mass is in motion. Momentum is a moving body's quantity of motion, measured as the product of its mass and velocity.

Here,

Momentum is a moving body's amount of motion, calculated as the product of its mass and velocity. It is calculated as mass *velocity.

To know more about momentum,

https://brainly.com/question/22418297

#SPJ4

The ability of a fluid to exert an upward force on an object is called buoyancy or upthrust. The upward force is called buoyant force.

The buoyancy as explained above is caused by the pressure exerted by the fluid in which the object is immersed. That pressure force is called an upthrust force or buoyant force.

According to Archimedes principle, the buoyant force is the upward force exerted by a fluid on an object placed in them. The magnitude of the buoyant force is equal to the weight of a fluid displaced by an object.

Due to the buoyant force, a body immersed wholly of partly in a fluid will to lose its weight. In other words, it appears to be lighter. This phenomenon makes it possible for fish, swimmers, ships, icebergs, and hot air balloons to stay afloat.

Learn more about buoyant force here:

brainly.com/question/29575311

#SPJ4

To safely cross a canyon 1.00 km wide with a starting point 0.750 km lower than the opposite side, the minimum constant acceleration in the x-direction that must be provided by the engine of the motorcycle is 9.8 m/s² (approximately the acceleration due to gravity).

The motorcycle must have a minimum constant acceleration in the x-direction of 9.8 m/s² in order to safely cross the canyon. This acceleration is necessary to counteract the force of gravity and ensure that the motorcycle and rider can clear the distance of the canyon and land on the opposite side at a point that is 0.750 km higher than the starting point. The motorcycle is assumed to be fired horizontally from the starting point, and the rider must be able to maintain balance throughout the crossing.

To safely cross a canyon 1.00 km wide with a starting point 0.750 km lower than the opposite side, the minimum constant acceleration in the x-direction that must be provided by the engine of the motorcycle is 9.8 m/s² (approximately the acceleration due to gravity). This is assuming that the motorcycle is fired horizontally from the starting point and that the rider is able to maintain balance throughout the crossing.

Learn more about Rocket Motorcycle Canyon Crossing here:

https://brainly.com/question/13016913

#SPJ4

The answer is  

1 . The force of gravity on the ship at that orbit be using the early measurements be 5.435 × 10^5 N..

2.  The acceleration of your lander due to gravity be 4.94 m/s^2..

Force of Gravity

The gravitational force, which is what pushes mass-containing objects toward one another. We frequently consider the pull of gravity from the Earth. Your body is kept on the ground by this force. However, all mass-bearing objects are pulled toward one another by gravity.

Super-Earth-sized exoplanet Proxima Centauri b revolves around a M-type star. It has an Earth-mass of 1, orbits its star every 11.2 days, and is 0.048 AU away from it. In 2016, news of its finding was released.

Given that,

Planet Proxima Centauri B has a mass of approximately7.6x10^24 kg.

The ship lander has a mass of approximately 1.1x10^5 kg.

stable orbit  radius of 9000000 m from the center of planet Proxima Centauri B.

1. Using Newton's Law of Universal Gravitation,  the force of gravity on the ship at that orbit be using the early measurements = GMm/r²

= (7.6 × 10⁻¹¹)×(7.6x10^24)(1.1x10^5)/(9000000)² N

= 5.435 × 10^5 N.

2.  the acceleration of your lander due to gravity: a = F/m

=  5.435 × 10^5 N/ 1.1x10^5 kg.

= 4.94 m/s^2.

3.The planet's mass distribution might not be uniform, which is one of the potential factors that might explain the discrepancy between expected and actual figures. Therefore, the planet's centre of mass is not found at the geometric centre.

The orbiting path of gravity  could be elliptical rather than circular.

To know more about  Force of Gravity Refer to:

brainly.com/question/28033170

#SPJ1

A truck loaded with goods has a large mass, so it have to slow down before a stop light as it has a large momentum with the same velocity, making stopping difficult.

A body's amount of motion is referred to as momentum. Since velocity and the direction of a body's motion have an impact on momentum, it is measured by "mass velocity". Given that mass is a scalar variable and velocity is a vector, momentum is a vector quantity. Mass multiplied by velocity equals momentum. Momentum is a body's "power" while it is moving, demonstrating how much force it can exert on another body. For instance, a baseball (small mass) thrown quickly can have the same momentum as a bowling ball (big mass) travelling slowly (low velocity) (high velocity).

Here,

Because a truck loaded with goods has a large momentum with the same velocity, it must slow down before a stop light, making stopping difficult.

To know more about momentum,

brainly.com/question/22418297

#SPJ4

Kepler was the first astronomer to look at the planet’s orbital paths. He discovered that these had a/an elliptical shape.

The heliocentric model is actually just a model for the solar system, not our entire universe.

Torque and work have the same dimension formula but only work is expressed in the SI unit of Joule. Torque is a vector quantity and work is a scalar quantity.

Torque in angular motion is equivalent to what force is in linear motion. In other words torque cause the angular change in and makes the object to rotates in a circular path around its own axis of rotation. It is formulates as T = F ×R. Where F is the force, R is the radius of circular path. its dimension will be [MLT⁻²] × [L] = [ML²T⁻²].

On the other hand, work is the product of force vector(F) and displacement vector(d). Work is said to be done when the object gets displaced in the direction of the force applied. Its SI unit is Joule.

W = F × d × sinθ

Where θ is the direction of force with respect to the displacement.

Its dimension would be, T = [MLT⁻²] × [L] = [ML²T⁻²]

So the dimension formula for both will be the same.

To know more about torque, here

https://brainly.com/question/25708791

#SPJ4

The gravitational or universal (G) constant, which relates force to mass and distance, is a symbol for this proportionality (G).

The gravitational constant, G, whose value depends on the units employed and is a universal constant, is multiplied by the product of the masses (m1 and m2) and divided by the square of the distance R to represent the attractive force in symbols: F = G(m1m2)/r^2.

Between two objects with masses m1 and m2, where f is the force. d is the separation between two objects, and G is the gravitational constant. The gravitational constant is G. m = the object's mass, M = the earth's mass, and r = the earth's radius.

Learn more about gravitational Visit: brainly.com/question/27943482

#SPJ4

Weight is the gravitational attraction that an object experiences. The mass of an item remains constant, but its weight might vary based on the amount of gravity acts on it.

The mass of the item has a direct relationship with the gravitational force (FG) and may be determined by applying the formula FG=mg.

The weight, mass, and gravitational force that are applied to an object are represented in the formula FG=mg by the letters FG, m, and g. FG varies if gravity changes, even though the mass remains constant.

Learn more about how the weight of an item may change here:

https://brainly.com/question/17298439

According to the International System of Units, the SI unit of distance is a metre. Surprisingly, by using this as the base unit and some equations, many other derived units or quantities such as volume, area, acceleration, and speed are formed.

The magnitude or size of displacement between two positions is defined as distance. It is important to note that the distance between two points is not the same as the distance traveled between them. The total length of the path traveled between two points is referred to as the distance traveled. The total length of an object's actual path is referred to as distance. The displacement of an object between two points is the straight line (shortest) distance between those points, directed from one position to the other. The SI unit for measuring distance and displacement is the meter (m).

Here,

According to the International System of Units, a metre is the SI unit of distance. Surprisingly, by using this as the base unit and some equations, many other derived units or quantities, such as volume, area, acceleration, and speed, can be formed.

To know more about distance,

https://brainly.com/question/11667907

#SPJ4

When an object doesn't move over time, its velocity is zero. When there is no displacement of the item, the velocity of the object is 0. Between two different time intervals, the object's position is unchanged.

By dividing the entire distance traveled by the time it took the object to go a certain distance, you may calculate the object's initial velocity. V, d, and t are the three variables that make up the equation V = d/t.

Angular acceleration at time zero is -10 rad/s2, and the angular velocity is 27.5 rad/s. How many complete rotations does the disc make before coming to a stop. The circular path is always parallel to the linear velocity. The tangential speed determines magnitude.

Learn more about velocity Visit: brainly.com/question/29523095

#SPJ4

Correct Question:

How do you find velocity at time t=0?.

Answer:

The spring constant is 907.2 N/m

Explanation:

v^2 = u^2 + 2as

Where:

v = final velocity

u = initial velocity

a = acceleration

s = displacement

As the spring is clamped to the table, the only displacement is horizontal, so the only acceleration is due to gravity. The final velocity is 0, as the ball lands on the floor. Therefore, we can use the equation of motion to determine the initial velocity of the ball:

v^2 = u^2 + 2as

0 = u^2 + 2g(1.6 m)

u = √ (2g(1.6 m))

We know that acceleration due to gravity is 9.8 m/s^2, so:

u = √ (2 * 9.8 * 1.6) = 4.6 m/s

Now we can use the conservation of energy to solve for the spring constant.

The spring constant can be determined by using the equation:

PE = 1/2 kx^2

where PE is the potential energy stored in the spring, k is the spring constant, and x is the compression of the spring.

KE = 1/2 mv^2

where KE is the kinetic energy of the ball, m is the mass of the ball, and v is the initial velocity of the ball

The sum of the potential energy stored in the spring and the kinetic energy of the ball is conserved, so:

1/2 kx^2 = 1/2 mv^2

We can now substitute the values we know into the equation:

1/2 k * (0.2)^2 = 1/2 * (19g) * (4.6m/s)^2

Solving for k:

k = (19g * (4.6m/s)^2 ) / (0.2m)^2

k = 907.2 N/m

Note that the unit of mass is gram (g) and it needs to be converted to kg to make the units consistent.

Work can be calculated with the equation given as Work = Force × Distance

When a force acts on an object to cause a displacement, it was said that work was taking place. Three variables must be known in order to calculate the work when a force causes an object to be displaced.

Work = Force × Distance is the formula for calculating work. The joule (J), also known as the Newton meter (N m), is the SI unit for work. When an object is moved over a distance of 1 m with 1 N of force, one joule is equal to the amount of work that is accomplished.

To determine the amount of work, three quantities must be known. The force, the displacement, and the angle between the force and the displacement are the three variables.

Learn more about work on;

https://brainly.com/question/28199162

#SPJ1

It will take about 12 days for the trekkers predict to walk from phakding to Everest base camp.

This is referred to as a form of movement which consists of walking for several days or several weeks and being entirely or partially self-sufficient.

The standard Everest Base Camp Trek is 130km round trip and is usually divided into 12 days which includes time and space for acclimatization to the region and then we have 8 days to get to Everest Base Camp and 4 days to get back which is therefore the reason why ythe predicted days will be 12 and is the correct choice.

Read more about Trekking here https://brainly.com/question/29529058

#SPJ1

The process by which molecules spontaneously move through a solution or disperse until they are evenly distributed throughout is known as diffusion.

Diffusion is the movement of molecules (either solution- or gas-borne particles) from a region of high concentration to a region of lower concentration, or down a gradient in concentration. Diffusion over the cell surface membrane allows some chemicals to enter and exit cells.

The term "facilitated diffusion" refers to a type of passive transport. It happens when chemicals like glucose or amino acids shift from a state of high concentration to a state of low concentration with the help of carrier proteins or membrane pores.

Learn more about molecules Visit: brainly.com/question/26044300

#SPJ4

Answer:

The resistance within a battery or other voltage source that causes a drop in source voltage when current is present is referred to as internal resistance. The resistance present in the external circuit, on the other hand, is referred to as external resistance.

Answer:

Work Done = Force x Displacement

Explanation:

The mean of the sample is point estimator of mean of the population from which samples are drawn randomly.

Correct option: II and III is correct choice.

Samples G and H are selected from the same population of quantitative data. Mean of G is equal to the mean of the population. We cannot work on population in most of the cases thus we draw samples and work on sample to predict the properties of population. Sample mean is point estimator of population mean, and is used to predict the population mean.

Since both G and H are samples drawn from same population, thus, they both are point estimators of the population mean. It is not necessary that both G and H must be same. They can be same and cannot be same.

Thus, Option: II and III is correct choice

To know more about mean of the sample refer to:

brainly.com/question/20747890

#SPJ4

The complete question is as follows:

Samples G and H were selected from the same population of quantitative data and the mean of each sample was determined. The mean of sample G is equal to the mean of the population. Which of the following statements must be true?

I. The mean of sample H must also be equal to the population mean.

II. The mean of sample G, TG, is a point estimator for the mean of the population.

III. The mean of sample H, my, is a point estimator for the mean of the population.

A. I only

B. II only

С. III only

D. I and II

E. II and III

Latency has four primary causes: The main factor causing network slowness is data processing. In order to determine a data packet's precise destination at this time, the header must be studied.

Select the best route, and then add it to the relevant link's transmission queue. Unstructured data must be converted into machine-readable information through a process known as data processing. So acquiring, recording, organizing, storing, and adapting or modifying the data constitute the process of converting raw data into usable information. Latency has four primary causes: The main factor causing network slowness is data processing. All actions taken to convert useless data into information are categorized as data processing. Informational outputs include things like reports from analytics, visualizations, and well-organized data collections.

Learn more about data processing here

https://brainly.com/question/27505981

#SPJ4

The complete question is -

What factors does network latency depend on?.

A basic truth of inheritance that had been known well before Darwin's time was that: Offspring frequently resemble their parents AND they inherit genes from their parents.

Assets left to a person's heirs after their death are referred to as inheritance. Cash, investments like stocks or bonds, and other things like jewellery, cars, works of art, antiques, and real estate can all be included in an inheritance. Evolutionary transformation requires genetic inheritance. It explains how genes are transmitted down across generations. Therefore, it may initially appear odd that life history research rarely takes into account genetic inheritance. The most widespread types of inheritance include autosomal dominant, autosomal recessive, X-linked dominant, X-linked recessive, multifactorial, and mitochondrial inheritance. Traits that are determined by the genes found on the autosomes are referred to as "autosomal."

To know more about inheritance refer to:

https://brainly.com/question/15078897

#SPJ4

The complete question is as follows:

A basic truth of inheritance that had been known well before Darwin's time was that Select one:

a. Offspring inherit genes from their parents.

b. selective breeding improves domesticated plants and animals

c. Offspring frequently resemble their parents AND they inherit genes from their parents

d, Offspring frequently resemble their parents.