List what sources of uncertainty go into calculating the wavelength of the laser (no explanation necessary here). (b) Accurately report the uncertainties for these quantities. (c) Explain which of these contributes the most to the final uncertainty on the laser wavelength

Answer:

the magnitude of the magnetic field is 1.23 x 10⁸ T.

Explanation:

Given;

magnitude of the electric field, E = 3.7 V/m

The magnitude of the magnetic field is calculated as;

E = cB

where;

B is the magnitude of the magnetic field

c is the speed of light = 3 x 10⁸ m/s

From the above equation, the magnetic field, B, is calculated as;

[tex]B = \frac{E}{c} \\\\B = \frac{3.7 }{3\times 10^8 } \\\\B = 1.23 \times 10^{-8 } \ T[/tex]

Therefore, the magnitude of the magnetic field is 1.23 x 10⁸ T.

Answer:

The correct solution is:

(a) 1.66

(b) 1.05

Explanation:

Given:

Bending stress,

[tex]\sigma_b = 25 \ kpsi[/tex]

Torsional stress,

[tex]\tau= 15 \ kpsi[/tex]

Yield stress of steel bar,

[tex]\delta_y = 60 \ kpsi[/tex]

As we know,

⇒ [tex]\sigma_{max}^' \ = \sqrt{\sigma_b^2 + 3 \gamma^2}[/tex]

        [tex]= \sqrt{(25)^2+3(15)^2}[/tex]

        [tex]=36.055 \ kpsi[/tex]

(a)

The factor of safety against static failure will be:

⇒ [tex]\eta_y = \frac{\delta_y}{\sigma_{max}^'}[/tex]

By putting the values, we get

        [tex]=\frac{60}{36.055}[/tex]

        [tex]=1.66[/tex]

(b)

According to the Goodman line failure,

[tex]\sigma_a = \sigma_b = 25 \ kpsi[/tex]

[tex]S_e = 40 \ kpsi[/tex]

[tex]\sigma_m = \sqrt{3} \tau[/tex]

     [tex]=\sqrt{3}\times 15[/tex]

     [tex]=26 \ kpsi[/tex]

[tex]Sut = 80 \ kpsi[/tex]

⇒ [tex]\frac{\sigma_a}{S_e} +\frac{\sigma_m}{Sut} =\frac{1}{\eta_y}[/tex]

      [tex]\frac{25}{40}+\frac{26}{80}=\frac{1}{\eta_y}[/tex]

              [tex]\eta_y = 1.05[/tex]

Answer:

if you want to drop into the water at the greatest possible distance from the edge, you must hang for 1.662s.

Explanation:

The time period of the oscillation is,

[tex]T = 2\pi \sqrt{ \frac{I} {g }[/tex]

[tex]T = 2\pi \sqrt{\frac{11}{9.8} } \\\\T= 6.65 s[/tex]

This would be the time taken for the person to move from.

The duration of time he hangs over the river be one-fourth of the time period.

Here,

[tex]t= \frac{T}{4} \\\\t=\frac{6.65}{4}\\\\t = 1.662 s[/tex]

Answer:

The answer is "[tex]0.3336\ m^3[/tex]"

Explanation:

Using the Promideal gas law:

[tex]P_A=P_B\\\\P_A(V_A-\eta_A b)= \eta_A RT......(1)\\\\P_B V_B=\eta_B \bar{R}T........(2)\\\\From (1) \zeta (2)\\\\[/tex]  

[tex]\frac{\eta_A}{V_A-\eta_A b}=\frac{\eta B}{V B}\\\\ \frac{V A- \eta_A b}{V B}=\frac{\eta A}{\eta B }\\\\ \frac{V A-b}{V B}=\frac{1}{2}\\\\V A+V B=1\\\\V B =1- V A\\\\\frac{V A-b}{1-V A}=\frac{1}{2}\\\\2V A-2b=1-V A\\\\3 V A=1+2b\\\\V A=\frac{1+2b}{3}\\\\[/tex]

      [tex]=\frac{1+2(4\times 10^{-4})}{3}\\\\=0.3336\ m^3[/tex]

The equilibrium value of Va is 0.3336 m³.

The equilibrium value of Va is determine by applying ideal gas law as shown below;

Pressure of gas A = Pressure of gas B

Pa = Pb

Pa(Va - nab) = naRT----(1)

PbVb = nbRT -----(2)

Solve equation (1) and (2)

[tex]\frac{P_b}{RT} = \frac{n_b}{V_b} \\\\\frac{P_b}{P_a(V_a- n_ab)/n_a} = \frac{n_b}{V_b}\\\\\frac{n_a}{V_a - n_ab} = \frac{n_b}{V_b} \\\\\frac{V_a - n_ab}{V_b} = \frac{n_a}{n_b} \\\\\frac{V_a - b}{V_b} = \frac{1}{2}[/tex]

Va + Vb = 1

Vb = 1 - Va

[tex]\frac{V_a - b}{1 - V_a} = \frac{1}{2}[/tex]

2Va - 2b = 1 - Va

3Va = 1 + 2b

[tex]V_ a = \frac{1 + 2b}{3} \\\\V_a = \frac{1 + (2 \times 4\times 10^{-4})}{3} \\\\V_a = 0.3336 \ m^3[/tex]

Thus, the equilibrium value of Va is 0.3336 m³.

Learn more about equilibrium value here: https://brainly.com/question/22569960

Answer:

Explanation:

The best way to do this is to remember the rule about the halfway mark in a parabolic path. At a trajectory's half way point in its travels, it will be at its max height. To get the total time in the air, we take that time at half way and double it. Here's what we know that we are told:

initial velocity is 20 m/s

Here's what we know that we are NOT told:

a = -9.8 m/s/s and

final velocity is 0 at an object's max height in parabolic motion.

We will use the equation:

[tex]v=v_0+at[/tex] where v is final velocity and v0 is initial velocity. Filling in:

0 = 20 + (-9.8)t and

-20 = -9.8t so

t = 2 seconds. The stone reaches its max height 2 seconds after it is thrown; that means that after another 2 seconds it will be on the ground. Total air time is 4 seconds.

Answer:

12

Explanation:

i agree the answer is 12 because the acceleration is given by the difference in the velocity divided by the time taken

a=v-u/t

60-0/5

=12m/s²

I hope this helps

Answer:

Newton's First Law of Motion states that a body will stay at rest or continue its path with constant velocity unless an external force acts upon it. Newton's Second Law of Motion states that the net force that acts upon a body is equal to the mass of the body multiplied by the acceleration due to the net force.

Answer:

5572.8 N

Explanation:

Applying,

F  = ma.............. Equation 1

Where F = Force, m = mass of the car, a = acceleration.

We can find a by applying,

v² = u²+2as............. Equation 2

Where v = final velocity, u = initial velocity, a = acceleration,  = distance.

From the question,

Given: v = 0 m/s (come to rest), u = 1.7 m/s, s = 0.210 m

Substitute these value into equation 2

0² = 1.7²+2×0.21×a

a = -1.7²/(2×0.21)

a = -2.89/0.42

a = -6.88 m/s²

Also given: m = 810 kg

Substitute these value into equation 1

F = 810(-6.88)

F = -5572.8 N

Hence the force on the bumber is 5572.8 N

Answer:

nnnjjdndbsnnshfhhgbfbdbdh

Answer:

Microwave is a types of a electromagnetic radiation

Answer:

Transvers

Explanation:

Because microwave is electromagnetic  waves and all electromagnetic waves are transvers.

Answer:

a) The proton's speed is 5.75x10⁵ m/s.

b) The kinetic energy of the proton is 1723 eV.  

Explanation:

a) The proton's speed can be calculated with the Lorentz force equation:

[tex] F = qv \times B = qvBsin(\theta) [/tex]     (1)          

Where:

F: is the force = 9.14x10⁻¹⁷ N

q: is the charge of the particle (proton) = 1.602x10⁻¹⁹ C

v: is the proton's speed =?

B: is the magnetic field = 3.28 mT

θ: is the angle between the proton's speed and the magnetic field = 17.6°

By solving equation (1) for v we have:

[tex]v = \frac{F}{qBsin(\theta)} = \frac{9.14 \cdot 10^{-17} N}{1.602\cdot 10^{-19} C*3.28 \cdot 10^{-3} T*sin(17.6)} = 5.75 \cdot 10^{5} m/s[/tex]

Hence, the proton's speed is 5.75x10⁵ m/s.

b) Its kinetic energy (K) is given by:

[tex] K = \frac{1}{2}mv^{2} [/tex]

Where:

m: is the mass of the proton = 1.67x10⁻²⁷ kg

[tex] K = \frac{1}{2}mv^{2} = \frac{1}{2}1.67 \cdot 10^{-27} kg*(5.75 \cdot 10^{5} m/s)^{2} = 2.76 \cdot 10^{-16} J*\frac{1 eV}{1.602 \cdot 10^{-19} J} = 1723 eV [/tex]  

Therefore, the kinetic energy of the proton is 1723 eV.

I hope it helps you!        

Answer:

store a charge for later use

Answer:

Friction always opposes the motion

HAVE A GREAT DAY :)

Answer:

Part A - 4.084 mJ

Part B - 0.908 mJ

Part C - 8.168 mJ

Explanation:

Part A: How much energy is stored in the capacitor network as shown in (Figure 1)?

Since capacitors C₂ and C₃ are in series, their equivalent capacitance is C',

1/C' = 1/C₂ + 1/C₃      (Since C₁ = C₂ = C₃ = C)

1/C' = 1/C + 1/C

1/C' = 2/C

C' = C/2

Since C' is in parallel with C₁, the equivalent capacitance for the circuit is C" = C₁ + C' = C + C/2 = 3C/2

C" = 3C/2

The energy stored in the circuit, W = 1/2C"V² where C" = equivalent capacitance = 3C/2 and V = voltage = 15.0 V

W = 1/2C"V²

W = 1/2(3C/2)V²

W = 3CV²/4

since C = 24.2 μF = 24.2 × 10⁻⁶ F

W = 3CV²/4

W = 3 × 24.2 × 10⁻⁶ F (15.0 V)²/4

W = 3 × 24.2 × 10⁻⁶ F × 225 V²/4

W = 16335/4 × 10⁻⁶ FV²

W = 4083.75 × 10⁻⁶ J

W = 4.08375 × 10⁻³ J

W = 4.08375 mJ

W ≅ 4.084 mJ

Part B: How much energy would be stored in the capacitor network if the capacitors were all in series?

If the capacitors are connected in series, their equivalent resistance is C'

and 1/C' = 1/C₁ + 1/C₂ + 1/C₃

Since C₁ = C₂ = C₃ = C

1/C' = 1/C + 1/C + 1/C

1/C' = 3/C

C' = C/3

The energy stored in the circuit, W = 1/2C'V² where C' = equivalent capacitance = C/3 and V = voltage = 15.0 V

W = 1/2C'V²

W = 1/2(C/3)V²

W = CV²/6

since C = 24.2 μF = 24.2 × 10⁻⁶ F

W = CV²/6

W = 24.2 × 10⁻⁶ F (15.0 V)²/6

W = 24.2 × 10⁻⁶ F × 225 V²/6

W = 5445/6 × 10⁻⁶ FV²

W = 907.5 × 10⁻⁶ J

W = 0.9075 × 10⁻³ J

W = 0.9075 mJ

W ≅ 0.908 mJ

Part C: How much energy would be stored in the capacitor network if the capacitors were all in parallel?

If the capacitors are connected in parallel, their equivalent resistance is C'

and C' = C₁ + C₂ + C₃

Since C₁ = C₂ = C₃ = C

C' = C + C + C

C' = 3C

The energy stored in the capacitor network, W = 1/2C'V² where C' = equivalent capacitance = 3C and V = voltage = 15.0 V

W = 1/2C'V²

W = 1/2(3C)V²

W = 3CV²/2

since C = 24.2 μF = 24.2 × 10⁻⁶ F

W = 3CV²/2

W = 3 × 24.2 × 10⁻⁶ F (15.0 V)²/2

W = 3 × 24.2 × 10⁻⁶ F × 225 V²/2

W = 16335/2 × 10⁻⁶ FV²

W = 8167.5 × 10⁻⁶ J

W = 8.1675 × 10⁻³ J

W = 8.1675 mJ

W ≅ 8.168 mJ

Answer:

The composition of Jupiter is similar to that of the Sun—mostly hydrogen and helium. Deep in the atmosphere, pressure and temperature increase, compressing the hydrogen gas into a liquid. This gives Jupiter the largest ocean in the solar system—an ocean made of hydrogen instead of water.

Answer:

Because SI system has fundamental units of MKS System

Answer:

Explanation: the unit of length ,mass , and time are same in both the system , thus, the SI system is the extended from of MKS system.

Answer:

The speed of proton is 2.1 x 10^5 m/s .

Explanation:

potential difference, V = 234 V

let the initial speed of the proton is v.

The kinetic energy of proton is

KE = q V

[tex]0.5 mv^2 = e V \\\\0.5\times 1.67\times 10^{-27} v^2 = 1.6\times 10^{-19} \times 234\\\\v=2.1\times 10^5 m/s[/tex]

Answer:

The answer is "Option B".

Explanation:

[tex]r=15\times 10^{7}\ km\ = 15\times 10^{10}\ m\\\\w=\frac{2\pi}{1\ year}\\\\=\frac{2\pi}{1\times 365.24 \times 24 \times 60 \times 60\ sec}\\\\a=w^2r\\\\=(\frac{2\pi}{1\times 365.24 \times 24 \times 60 \times 60\ sec})^2 \times 15 \times 10^{10}\ \frac{m}{s^2}\\\\[/tex]

[tex]=5.940 \times 10^{-3} \ \frac{m}{s^2}\\\\=6 \times 10^{-3} \ \frac{m}{s^2}\\\\=0.006\ \frac{m}{s^2}\\\\[/tex]

Explanation:

the process of conversion of energy from one form to another is called transformation of energy.

Explanation:

the car will be brought back

Answer:

where are the options

it's not full question

Answer:

b = frequency

Answer:

Hence the battery's emf E is ε = 11.9 V.

The internal resistance is r = 0.739 ohms.

Explanation:

Now we know that

Voltage V = 11.9 V.

Current I = 16.1 A.

Hence this is an ideal voltmeter there are no current flows when the Voltmeter is applied.

ε = V + I r

∵ I = 0

ε = V

ε = 11.9 V

Then the ammeter is applied.

Let's take ( r ) to be the total resistance which is equal to internal resistance.

V = I r

r = [tex]\frac{V}{I}[/tex]

 [tex]= \frac{11.9}{16.1}[/tex]

r = 0.739 ohms

The battery's emf (E) and internal resistance (r) are 11.9 Volts and 0.739 Ampere respectively.

Given the following data:

To determine the battery's emf (E) and internal resistance (r):

For an ideal voltmeter, there isn't a flow of current and as such the current is equal to 0.

Mathematically, emf (E) is given by this formula:

[tex]E = V + IR[/tex]

Substituting the given parameters into the formula, we have;

[tex]E = 11.9 + 0R\\\\E = 11.9 + 0[/tex]

E = 11.9 Volts.

For the internal resistance (r):

Note: The total resistance is equal to internal resistance.

Applying Ohm's law, we have:

[tex]R = \frac{V}{I} \\\\R = \frac{11.9}{16.1}[/tex]

R = r = 0.739 Ampere.

Read more current here: https://brainly.com/question/25813707

Answer: [tex]3.92\ m/s[/tex]

Explanation:

Given

Mass of the attached object is [tex]m=2.3\ kg[/tex]

Spring is stretched by [tex]A=0.5\ m[/tex]

Speed reaches zero after [tex]t=0.4\ s[/tex]

Speed is zero at the extremities of the S.H.M motion that is

[tex]\Rightarrow \dfrac{T}{2}=0.4\\\\\Rightarrow T=0.8\ s[/tex]

Time period of motion is [tex]0.8\ s[/tex] which can also be given by

[tex]\Rightarrow \omega T=2\pi\\\\\Rightarrow \omega=\dfrac{2\pi }{T}\\\\\Rightarrow \omega =\dfrac{2\pi }{0.8}\\\\\Rightarrow \omega=\dfrac{5\pi }{2}[/tex]

Maximum speed for S.H.M. is [tex]v_{max}=A\omega[/tex]

[tex]\Rightarrow v_{max}=0.5\times 2.5\pi\\\Rightarrow v_{max}=3.92\ m/s[/tex]

Answer:

Explanation:capacitor

Answer:

Ammeter

Explanation:

pls mark me as a brainlist

Answer:

W = 641.52 J

Explanation:

The work done here will be the sum of potential energy and the kinetic energy of the boy. Here potential energy accounts for vertical motion part while the kinetic energy accounts for the horizontal motion part:

[tex]Work\ Done = Kinetic\ Energy + Potential\ Energy\\\\W = K.E +P.E\\\\W = \frac{1}{2}mv^2+mgh\\\\[/tex]

where,

W = Work Done = ?

m = mass = 6 kg

v = speed = 4.2 m/s

g = acceleration dueto gravity = 9.81 m/s²

h = height = 10 m

Therefore,

[tex]W = \frac{1}{2}(6\ kg)(4.2\ m/s)^2+(6\ kg)(9.81\ m/s^2)(10\ m)[/tex]

W = 52.92 J + 588.6 J

W = 641.52 J

Answer:

a)   # _photon = 2.5 10¹⁸ photons / s,   b) E = 10⁻² N / C,  c)     B = 3 10⁻¹¹ T

d)  r=  2 10⁹ m

Explanation:

a) Let's solve this exercise in part, let's start by finding the energy of each photon using the Planck relation

          E₀ = h f

          c = λ f

          E₀ = h c /λ

          E₀ = 6.63 10⁻³³⁴   3 10⁸/500 10⁻⁹

          E₀ = 3.978 10⁻⁻¹⁹ J

Let's use a direct ratio rule to find the number of photons

         #_foton = E / Eo

         #_fototn = 1 / 3.978 10⁻¹⁹

         # _photon = 2.5 10¹⁸ photons / s

b) The intensity received by the detector is related to the electric field

          I = E²

Let's look for the intensity that the detector receives, suppose that the emission is shapeless throughout the space

          I = P / A

          P = I A

Let's use index 1 for the point on the bulb and index 2 for the point on the detector.

The area of ​​a sphere is

          A = 4π r²

         P = I₁ A₁ = I₂ A₂

         I₁ r₁² = I₂ r₂²

         I₂ = I₁  r₁²/r₂²

         I₂ = I₁    1 / 100²

         I₂ = I₁ 10⁻⁴

we must know the intensity at the output of the bulb suppose that I₁ = 1 J

          I₂ = 10⁻⁴ J

let's look for the electric field

         E =√I

         E = √10⁻⁴

         E = 10⁻² N / C

c) for the calculation of the magnetic field we use that the field is in phase

               E / B = c

               B = E / c

               B = 10⁻² / 3 10⁸

               B = 3 10⁻¹¹ T

d) Let's use a direct proportions rule if we fear 2.5 10¹⁸ photons in an area  A = 4π R² where R = 100 m how many photons are there in the area of ​​the detector r = 1 cm,   A’= 10⁻⁴ m²

             #_photons = 2.5 10¹⁸ A_detector / A_sphere

             #_photons = 2.5 1018 10-4 / 4π 10⁴

             #_photons = 2 10⁹ photons in the detector area

for the number of photons to decrease to 1, the radius of the sphere must be 2 10⁹ m

Answer:

English please?

Explanation:

Explain in english?

Answer:

"the minimum frequency of radiation that will produce a photoelectric effect."

Explanation:

That answer was derived from gogle cuz my explanations was harder to explain but good luck