The current flowing through a resistor at a constant temperature is directly proportional to the potential difference across it. This is called Ohm's law
What are three differences and similarities between a Vernier Calipers and a Micrometer? (please leave a good answer)
Answer:
Explanation:
Vernier scale
Mathematical tool
A vernier scale, named after Pierre Vernier, is a visual aid to take an accurate measurement reading between two graduation markings on a linear scale by using mechanical interpolation; thereby increasing resolution and reducing measurement uncertainty by using vernier acuity to reduce human estimation error. Wikipedia
Purpose: Measuring more precisely than could be done unaided when reading a uniformly divided straight or circular measurement scale
Creator: Pierre Vernier
Year invented: 1631
..............................................................................................................................................................................................................................................................................................
A micrometer is a measuring instrument that can make extraordinarily precise measurements. Most micrometers are designed to measure within one one-thousandth of an inch! That's a close fit. Exact measurements like this are necessary when even the smallest of space between objects can cause problems or difficulties.
Micrometer
Mathematical tool
A micrometer, sometimes known as a micrometer screw gauge, is a device incorporating a calibrated screw widely used for accurate measurement of components in mechanical engineering and machining as well as most mechanical trades, along with other metrological instruments such as dial, vernier, and digital calipers. Wikipedia
Operation supported: Component measurement
Purpose: Precision measurement of a component
Variant: Digital mics, Bench micrometer, Limit mics, Digit mics, MORE
Component: Screw, Spindle, Ratchet stop, Anvil, Frame, Barrel, Thimble lock, Thimble
Application: Mechanical Engineering, Machining
you now barbecue is hot, but have you ever thought about the methods of heat transfer related to barbecue?
a) at your barbecue party, what would be an example of heat by conduction?
b) at your barbecue party where would heat be transferred b convection?
c) there is also radiation from the barbecue. where would you best feel this?
d) in some grill oven you put your meat under the heating element your meat is grilled by the heat coming from above. it will take longer to cook this meat than a similar piece on the barbecue can you explain this?
Answer:
Explanation:
There are three modes of heat transfer.
1. Conduction: It is the mode of heat transfer when the object is in contact with hot body and gradually the heat transfer from the hot end to the cold end.
2. Convection: It is the mode of heat transfer in which the molecules gets heated and moves up and the cold molecules comes down and the process continues till the entire liquid or gas is at same temperature.
3. Radiation: It is the process of heat transfer in which the heat is transferred in the form of heat waves.
(a) When the cook pot is placed on flame, it is the example of conduction.
(b) When the liquid is placed on the flame in a container, the liquid gets heated by the mode of convection.
(c) We feel heat as we stand near the flame so it is the example of radiation.
(d) because the heat is trapped so it becomes hot in lesser time.
A man pulls his luggage on a 30 degree incline with a constant force of 25 N. How
much work does he do after walking 20.0 m?
a) 430 J
b) 330J
c) 1500J
d) 250 J
We know
[tex]\boxed{\sf W=Fscos\theta}[/tex]
[tex]\\ \sf\longmapsto W=25(20)cos30°[/tex]
[tex]\\ \sf\longmapsto W=500\times \dfrac{\sqrt{3}}{2}[/tex]
[tex]\\ \sf\longmapsto W=250\sqrt{3}[/tex]
[tex]\\ \sf\longmapsto W=250(1.73)[/tex]
[tex]\\ \sf\longmapsto W\approx 430J[/tex]
Option a) 430 J work done he do after walking 20.0 m.
What is work?Work, in physics, is a measure of energy transfer that happens when an object exists moved over a distance by an external force at least part of which exists involved in the direction of the displacement.
Displacement exists as the distance moved in a straight line, in a provided direction, from the starting point. Displacement exists as a vector quantity as it includes size and direction.
An angle stands the figure formed by two rays, named the sides of the angle, sharing a standard endpoint, named the vertex of the angle.
Force=F=25NDisplacement=s=20mAngle=30°⇒[tex]W=Fcos\theta[/tex]
⇒[tex]W=25(20)cos 30^{0}[/tex]
Then,
⇒[tex]W=50*\sqrt{3} /2[/tex]
⇒[tex]W=250\sqrt{3}[/tex]
Hence,
⇒[tex]W=250(1.73)[/tex]
[tex]W[/tex] approximately 430J.
Hence, Option a) 430 J work done he do after walking 20.0 m.
To learn more about Displacement refer to:
https://brainly.com/question/321442
#SPJ2
Answer the following questions 1 What is the difference between mass and weight of an object. Will the mass and weight of an object on the earth be same as their values on Mars ? Why?
Answer:
difference between mass and weight is that mass is amount of matter in a material while weight is a measure of how the force of gravity acts upon that mass.the mass of an object will be same on earth and mars but its weight on both planets will be different.
Give reason.
b} String roller is an example of wheel and axel .Why?
Explanation:
string roller is called an example of wheel and axel because The thin rod which needs to be turned is called the axle and the wider object fixed to the axle, on which we apply force is called the wheel.
hence the we apply force on the roller and the string gets tight.
A car travels first 10 km in 20 minutes and another 10 km in 30 minutes. What is the average speed of the car in m/s?
Total distance = 10 km + 10 km = 20 km
1 km = 1000 m
20km x 1000 = 20,000 m
Total time = 20 min. + 30 min. = 50 minutes
Average speed = Distance / time
Average speed = 20,000/50 min
Average speed = 400 m/s
Which nucleus completes the following equation?
Please ignore the answer I chose, it might be wrong
Answer:
D. [tex]^{39}_{18} Ar[/tex]
Explanation:
The given nuclear equation is the beta decay of chorine in which an electron, known as a beta particle, is given off from within the nucleus due to the breakdown of a neutron within the nucleus into a proton and a beta particle, such that the atomic number is increased by 1 from 17 to 18, which is the atomic number or argon, Ar, as follows;
[tex]^{39}_{17}Cl \ \rightarrow \ ^0_{-1} e + \ ^{39}_{18} Ar[/tex]
1. What type of VOM reading requires the meter to be placed in series with the circuit?
A. Resistance
B. Voltage
C. Current
O
D. Power
Answer:
C. Current.
Explanation:
In a series circuit the current is equal in all of its components, so to measure the current we put the meter in series with the circuit.
A 5.41 kg ball is attached to the top of a vertical pole with a 2.37 m length of massless string. The ball is struck, causing it to revolve around the pole at a speed of 4.75 m/s in a horizontal circle with the string remaining taut. Calculate the angle θ, between 0∘ and 90∘, that the string makes with the pole. Use g=9.81 m/s2.
Answer:
θ = 66º
Explanation:
This exercise of Newton's second law must be solved in part, let's start by finding the slowing down acceleration of the ball
a = v² / r
the radius of the circle is
sin θ = r / L
r = L sin θ
we substitute
a = v² /L sin θ
now let's write Newton's second law
vertical axis
T_y -W = 0
T_y = W
radial axis
Tₓ = m a (1)
let's use trigonometry for the components of the string tension
cos θ = T_y / T
sin θ = Tₓ / T
Tₓ = T sin θ
we substitute in 1
T sin θ = [tex]\frac{m \ v^2}{L \ sin \theta}[/tex]
T L sin² θ = m v²
we write our system of equations
T cos θ = m g
T L sin ² tea = m v²
we divide the two equations
L [tex]\frac{sin^2 \theta}{cos \theta}[/tex] = v² / g
(1 -cos²)/ cos θ = [tex]\frac{v^2 }{g \ L}[/tex]
1 - cos² θ = [tex]\frac{4.75^2}{9.81 \ 2.37}[/tex] cos θ
cos² θ + 0.97044 cos θ -1 = 0
we change variable cos θ = x
x² + 0.97044 x - 1 =0
x= [tex]\frac{-0.97 \pm \sqrt{0.97^2 - 4 1} }{2}[/tex]
since the square root is imaginary there is no real solution to the problem, suppose that the radius is 1 m r = 1 m
T sin θ = [tex]\frac{m \ v^2}{ r}[/tex]
T cos θ = m g
resolved
tan θ = [tex]\frac{v^2}{ r g}[/tex]
θ = tan⁻¹ ( 4.75²/ 1 9.81)
θ = 66º
Can acceleration and velocity be equal vectors?
Answer:
Velocity is the rate of change of position with respect to time, whereas acceleration is the rate of change of velocity. Both are vector quantities (and so also have a specified direction), but the units of velocity are meters per second while the units of acceleration are meters per second squared.
A converging lens of focal length 20cm, forms a real image twice the size of the object. Calculate:
i) the power of the lens;
ii) the position of the image.
Answer:
Solition given:
focal length(f)=20cm
size of image(v)=2x
size of object(u)=x
we have
power of lens= reciprocal to focal length=1/20=0.05/cm
ii.
the position of the image is beyond C.
Explanation:
See the attachment !!!!!!!
the diameter of circular park is 80 m find its area
A long distance runner running a 5.0km track is pacing himself by running 4.5km at 9.0km/h and the rest at 12.5km/h. What is his average speed?
Answer:
9.26 km/h
Explanation:
Applying,
V' = D'/t'............... Equation 1
Where V' = Average speed, D' = Total distance, t' = total time.
Given: D' = 5 km
But,
v = d/t............ Equation 2
Where v = speed , d = distance, t = time
t = d/v............ Equation 3
Given: d = 4.5 km, v = 9 km/h, and d = 0.5 km, v = 12.5 km/h
Therefore,
t₁ = 4.5/9 = 0.5 hours
t₂ = 0.5/12.5
t₂ = 0.04 hours
Therefore,
V' = 5/(0.5+0.04)
V' = 5/0.54
V' = 9.26 km/h
1.Convert 340 cm into m *(answer=0.34m)
2.What is the weight of potatoes of mass 75kg on the surface of the earth? *(ans=735 N)
[g=9.8 m/s^2
[g=9.8 m/s^2]
3.The weight of body is 420 N.Calculate its mass. *(42.857 kg)*
Answers are all given so i just need the process please (i will mark you brainliest please..
Answer:
1.for the first one 100centimeters make 1 meter therefore
100cm-1m
340cm-x
340/100
=3.4
the answer is supposed to be 3.4, maybe there's a mistake with the question or the answer
2.the weight of a body is given by the formula
mass×gravity,in this case the mass is 75kg and the gravity is 9.8
weight=75×9.8
=735N
3.for this one the mass of a body is given by the formula
mass=weight/gravity
=420/9.8
=42.8kg
I hope this helps
A ball of mass 1.0 kg is rolling due west at 30 m/s. A second ball of mass 2.0 kg moving due north at 6.0 m/s collides with the first ball and they stick together. What is the magnitude of the momentum of the two-ball system immediately after collision
Answer:
the magnitude of the momentum of the two-ball system immediately after collision is 32.31 kg.m/s
Explanation:
Given;
mass of the first ball, m₁ = 1.0 kg
mass of the second ball, m₂ = 2.0 kg
initial velocity of the first ball, v₁ = 30 m/s due west
initial velocity of the second ball, v₂ = 6 m/s due north
From the principle of conservation of linear momentum;
the total momentum before collision = total momentum after collision
The westward momentum of the first ball, = m₁v₁ = 1 x 30 = 30 kg.m/s
The northward momentum of the second ball = m₂v₂ = 2 x 6 = 12 kg.m/s
The resultant momentum of the two balls;
R² = 30² + 12²
R² = 1044
R = √1044
R = 32.31 kg.m/s
Therefore, the magnitude of the momentum of the two-ball system immediately after collision is 32.31 kg.m/s
Wat is acceleration!!!!!
Answer:
Acceleration is the rate of change of velocity with time.its system international unit is meters per second square.
I hope this helps
A water heater marked 4 kW takes 4 minutes to heat 1 kg of water from 20 °C to 50 °C. The cost of electrical energy per kWh
is $0.120. What will be the total cost of energy consumption?
The total cost of the energy consumption for the given time period is $0.0364
The given parameters include;
power rating of the heater, P = 4 kW = 4000 Wtime taken to completely boil the water,[tex]t = 4 \min = 4 \min \times \frac{1 \ h}{60 \ \min} = 0.067 \ h[/tex]mass of the water, m = 1 kginitial temperature of the water, t₁ = 20 ⁰Cfinal temperature of the water, t₂ = 50 ⁰Cspecific heat capacity of water, c = 4200 J/kg⁰Ccost of electrical energy = $0.12The total energy consumed in the process of heating the water;
Total electrical Energy = Energy of the heater (kWh) + Energy of the heated water (kWh)
Energy of the heater (kWh) = power x time
= 4 kW x 0.067 h
= 0.268 kWh
Energy of the heated water (J) = mcΔt
where;
Δt is the change in temperature = t₂ - t₁
= 50 ⁰C - 20 ⁰C = 30⁰C
Energy of the heated water (J) = 1 x 4200 x 30
= 126,000 J
Electrical power of the heated water (Watts) = [tex]\frac{126,000 \ J}{4 \ \min} \times \frac{1 \min}{60 \ s} = 525 \ W[/tex]
Energy of the heated water (kWh) = [tex]\frac{525}{1000} \times 4\min\times \frac{1 \ hr}{60 \min} = 0.035 \ kWh[/tex]
Total electrical Energy = 0.268 kWh + 0.035 kWh
= 0.303 kWh
The total cost of the energy consumed is calculated as;
[tex]Total \ cost = \frac{\$ \ 0.12}{kWh} \times 0.303 \ kWh = \$ \ 0.0364[/tex]
Therefore, the total cost of the energy consumption is $0.0364
To learn more about cost of electrical energy calculation, please visit: https://brainly.com/question/17924004
byeeeeeeeeeeeejdiiwidjwdjj2xi2idiwidisididie
Answer:
Be serious or else CEO of brainly will kick you out
After release of jet, energy is lost by the engine. How principle of conservation of energy is obeyed in this condition.
Answer:
The principle of conservation of energy states that in a closed system, the energy can neither be created nor destroyed between interacting particles and remains constant or transformed from one form to another
In the jet engine, the release of jet changes the number of interacting particles in the engine, and given that energy cannot be created in the instantaneously closed system of the engine, energy is carried away and therefore lost by particles in the jet exhaust
The conservation of energy principle is therefore obeyed in the condition in which the jet engine losses energy by the release of jet
Explanation:
Guys please help this is very important it would be greatly appreciated if you would add the work. Thank you !!
Answer:
enjoy
Explanation:
The number of time a cricket chirps in a minute is a function of the temperature in the formula: n=4t-160, where n=number of times a cricket chirps a minute and t=temperature in farenheit. You can use the temperature t=(1/4)n+40 to estimate the temperature based on the number of chirps per minute.
Reference frame definitely changes when also changes
Una partícula efectúa un MAS cuya ecuación es: x=0,3 cos (2t + /6) m. Determinar: Amplitud, frecuencia angular, fase inicial, periodo, frecuencia de oscilación y posición en t=0,25 s
Answer:
The answer is below
Explanation:
Una partícula efectúa un MAS cuya ecuación es: x=0.3cos (2t + π/6) m. Determinar: Amplitud, frecuencia angular, fase inicial, periodo, frecuencia de oscilación y posición en t=0.25 s
Solution:
La ecuación de la onda es:
x = A cos (ω t + Ф), donde:
A = amplitud, ω = frecuencia angular = 2 π / T = 2 π f, Ф = fase inicial, f = frecuencia, T = período
Por lo tanto, comparando la ecuación de la onda con x = 0.3cos (2t + π / 6), obtenemos:
a) A = 0.3
b) ω = 2 rad / s
c) Ф = π / 6 rad
d) ω = 2π / T
2 = 2π / T
T = 3.14 s
e) ω = 2πf
2 = 2πf
f = 0.32 Hz
f) en t = 0.25 s:
x (t) = 0.3cos (2 * 0.25 + π / 6) = 0.22 m
A person slaps her leg with her hand, which results in her hand coming to rest in a time interval of 2.25 ms2.25 ms from an initial speed of 4.25 m/s4.25 m/s . What is the magnitude of the average contact force exerted on the leg, assuming the total mass of the hand and the forearm to be 1.75 kg1.75 kg
Answer:
The force is 3305.6 N.
Explanation:
Final velocity, v = 0
time, t = 2.25 ms
initial velocity, u = 4.25 m/s
mass, m = 1.75 kg
Let the acceleration is a.
Use first equation of motion.
v = u + a t
0 = 4.25 + a x 0.00225
a = - 1888.9 m/s^2
The force is
F = ma
F = 1.75 x 1888.9
F = 3305.6 N
Which of the elements below have seven electrons in their outermost energy levels? A.) Cr, Mn, and Fe B.) Br, I, and Ci C.) O, S, and Se D.) He, Ne, and Ar
Answer:
B
Explanation:
the Halogen families have 7 valence electrons
Lifestyle practice that can improve your quality of life
Explanation:
And keep changing gradually.
Eat a variety of foods. ...
Base your diet on plenty of foods rich in carbohydrates. ...
Replace saturated with unsaturated fat. ...
Enjoy plenty of fruits and vegetables. ...
Reduce salt and sugar intake. ...
Eat regularly, control the portion size. ...
Drink plenty of fluids. ...
Maintain a healthy body weight
A skipper on a boat notices wave crests passing his anchor chain every 5.6 s . He estimates the distance between wave crests to be 16 m . He also correctly estimates the speed of the waves. Find this speed.
Answer:
v = 2.85 m/s
Explanation:
Given that,
A skipper on a boat notices wave crests passing his anchor chain every 5.6 s.
The distance between wave crests to be 16 m.
We need to find the speed of the waves. The speed of a wave can be calculated by the formula as follows :
[tex]v=f\lambda\\\\v=\dfrac{\lambda}{T}\\\\v=\dfrac{16}{5.6}\\\\v=2.85\ m/s[/tex]
So, the speed of the wave is 2.85 m/s.
Un auto se desplaza por una carretera recta a una velocidad de 85 km/h. Al cabo de 2 horas, ¿qué distancia habrá recorrido, en metros?
Answer:
Distancia, D = 170,000 metros
Explanation:
Dados los siguientes datos;
Velocidad = 85 km/h Tiempo = 2 horasPara encontrar la distancia recorrida, en metros;
Matemáticamente, la distancia recorrida por un objeto se calcula mediante la fórmula;
Distancia = velocidad * tiempo
Sustituyendo los valores en la fórmula, tenemos;
Distancia = 85 * 2
Distancia = 170 kilómetros
A continuación, convertiríamos el valor en kilómetros a metros;
Conversión:
1 kilómetros = 1000 metros
170 kilómetros = D metros
Multiplicación cruzada, tenemos;
D = 170 * 1000
D = 170,000 metros
Por lo tanto, habría viajado 170,000 metros después de 2 horas.
Which are characteristics of a prokaryotic cell? Select three options.
O contains DNA
O lacks DNA
O contains ribosomes
O lacks ribosomes
O contains a nucleus
O lacks a nucleus
I NEED THIS QUICKLY
Answer:
A. Contains DNA
C. Contains ribosomes
F. Lacks a nucleus
Explanation:
beansFe(aq) + Al(s) → beansAl(aq) + Fe(s) (7 points) a. What type of reaction is this? Explain what you think happened.b. This is also another type of reaction. What is it? Give another common example of this type of reaction.c. Do you think it is OK to eat the green beans? Explain why, or why not.
Answer:
tôi đoán lagf pjhAWN ỨNG HÓA HỌC
Explanation:
Does water exist on Mars? Explain your answer. Why didn't Jupiter become a star during the early.
Answer:
yes water was discovered in mars
