Particles q1 = -66.3 UC, q2 = +108 uC, and
93 = -43.2 uC are in a line. Particles q1 and q2 are
separated by 0.550 m and particles q2 and q3 are
separated by 0.550 m. What is the net force on
particle q2?

The maximum height reached by the roller coaster is  16.53 m.

The maximum height reached by the roller coaster is calculated by applying the principle of conservation of energy.

potential energy of the roller coaster at maximum height = kinetic energy at the lowest point

P.E = K.E

mgh = ¹/₂mv²

h = ( v² ) / ( 2g )

where;

h = ( 18² ) / ( 2 x 9.8 )

h = 16.53 m

Learn more about maximum height here: https://brainly.com/question/12446886

#SPJ1

The force needed to move an object has a high N value when its mass is large in kg, 1 kg weight in this case equals 9.81 N or 1 kg=9.8N.

We know that,

F =mg

F = 1kg ×9. 8 N

F = 9.8N

The kilogrammes, or simply kg, is a unit used to measure an object's mass in the international systems of units (SI unit). Newton, or simply N, is a unit used to measure force in the international systems of units (SI unit).

The kilogram and newton have a straight proportional connection.

Since When an object has a low mass in kg, it also has a low force in N needed to move it.

To know more about force

https://brainly.com/question/13191643

#SPJ4

More than a 100 nations broadcasted series. The Bold and the Beautiful teasers for the upcoming CBS soap opera hint at more conflict.

The line dividing the Earth's surface from the sky is known as the horizon. Earth-sky horizons and celestial horizons are the two basic categories of horizons. There are various sub-types of horizons for both Earth-sky and celestial horizons. Earth-sky horizons include the local horizon, regional horizon, and sea level horizon.

The particle horizon, also known as the cosmological horizon, comoving horizon, or cosmic light horizon, is the furthest a particle's light may have travelled before reaching an observer during the early universe's history.

To know more about horizon visit

brainly.com/question/2515106

#SPJ1

I believe the most important zone is cardiovascular, as it is essential for maintaining a healthy heart and lungs.

To learn more about human fitness refer :

brainly.com/question/30330399

#SPJ1

A parallel force is a force that acts in the same direction as the motion of an object. The best explanation for a parallel force would be Newton's laws of motion. According to Newton's first law, an object at rest will remain at rest, and an object in motion will continue in motion in a straight line at a constant speed unless acted upon by an unbalanced force.

Therefore, a parallel force, acting in the same direction as the motion of an object, will increase or decrease the speed of the object but not change its direction of motion.

Newton's second law of motion states that the acceleration of an object is directly proportional to the net force acting on the object and inversely proportional to its mass. A parallel force will cause acceleration, that is a change in the velocity, of the thing. The greater the force, the greater the acceleration, and the smaller the force, the smaller the acceleration.

This means that if an object is already moving in a certain direction and a parallel force is applied, the object will accelerate in that direction.

To learn more about parallel force visit the link:

https://brainly.com/question/14371544

By bouncing into (or out of) a stretched position while using the extended muscles as a spring to pull you out of the stretched position, you are stretching or "warming up."

For instance, repeatedly bouncing down to touch your toes. Stretching in this way is thought to be harmful and risky for injuries. In that it is movement-based, ballistic stretching is comparable to dynamic stretching. You strive to extend a bodily part's range of motion rather of extending it all the way to the limit.

Reaching over to touch your toes and bouncing to enhance range are two examples of ballistic stretching. Due to the risk of injury and lack of benefit compared to other, safer forms of stretching like PNF and dynamic stretches, this sort of stretching is rarely advised.

Learn more about stretching Visit: brainly.com/question/27356012

#SPJ4

20 Newton force is the force which can cause 1 m/s² acceleration in a body of mass 20 kg.

By the second law of Newton, force is defined as the time rate of change of momentum in a body. In other words a force can accelerate a body having some mass.

F = (m₁v₁-m₂v₂)/Δt

Where F is the force, m₁ & v₁ are the initial mass and velocity of the object and m₂ & v₂ are the final mass and velocity of the object.

Or, F = mass × acceleration

The SI unit of force is kg-m/s²or Newton. We can say that a force of 20 Newton can produce an acceleration of 1 m/s² in a body of 20 kg. Or it can produce a 4 m/s² acceleration in a body of 5 kg mass.

To know more about acceleration, here

https://brainly.com/question/12550364

#SPJ4

The speed of the car2 after the collision is 6 m/s . The direction is towards the right.

We have to note that the momentum of the object would have to be the product of the mass and the velocity of the object. In the case of the cars that we have we have to recall that; Car 1 has a mass of 8.0 kg and is moving left at 3.75 m/s. Car 2 has a mass of 5.5 kg and is moving right at 2.00 m/s.

We already know that;

Momentum after collision = momentum before collision

(8 * 3.75) + (5.5 * 2) = (8 * 1) + (5.5 * v)

v = final speed of car 1

Then we have;

30 + 11 = 8 + 5.5v

v = 6 m/s

Learn more about momentum:https://brainly.com/question/24030570

#SPJ1

Work is a unit of energy that results from exerting a force on the body that causes it to move. The formula W = F s cosθ denotes work done, where F denotes force applied, s denotes displacement, and = Angle between force and displacement. Joule is the SI unit of work.

Work in physics is the energy transferred to or from an object by applying force along a displacement. In its most basic form, work equals the product of force strength and distance traveled for a constant force aligned with the direction of motion. Work is the transfer of energy caused by a force acting on an object as it moves. The work done by a force on an object is calculated as the product of the magnitude of the force multiplied by the magnitude of the displacement multiplied by the cosine of the angle between them.

Here,

Work is a type of energy that is produced when a force is applied to the body, causing it to move. Work done is denoted by the formula W = F s cosθ , where F denotes force applied, s denotes displacement, and = Angle between force and displacement. The SI unit of work is the joule.

To know more about work,

https://brainly.com/question/21114262

#SPJ4

Newton's second law for rotational motion tells us that angular acceleration is directly related to the net torque and inversely proportional to the moment of inertia.

Mathematically, it is given as, τ = I α

where, τ is torque, I is moment of inertia, α is angular acceleration

Moment of inertia is described as the resistance to the change in rotation. It is given by the formula, I = m r², where m is mass and r is radius

Torque is nothing but the force and lever arm that can cause an object's rotation. It is also called as moment of force. Its SI units are N.m.

To know more about torque:

https://brainly.com/question/29775827

#SPJ4

Joules (1568) provide the potential energy.

Based on the force exerted on the two objects, the potential energy equation is determined. P.E. = mgh, where m is the mass in kilograms, g is the acceleration caused by gravity (9.8 m/s2 at the earth's surface), and h is the height in meters, is the formula for gravitational force.

As a result of an object's position in relation to a zero position, potential energy is, in essence, the energy that is contained in the object. An object has gravitational potential energy if it is positioned at a height above (or below) the zero height.

Here m=20 kg

height h=8m

g= 9.8

Potential energy (P.E) = mgh

Potential energy (P.E) =  20*8*9.8

Potential energy (P.E) = 1568 J

Learn more about potential energy Visit: brainly.com/question/13997830

#SPJ4

The population proportion, sometimes referred to as sampling distribution mean of p is a statistic of central tendency that expresses the average value of a group of sample proportions.

The formula for the mean of the sampling distribution mean of p is given by:

μp = p

where "p" is the population proportion. This formula states that the mean of the sampling distribution of p is equal to the population proportion. This is known as the "Law of Large Numbers" which states that as the sample size increases, the sample proportion will become closer to the population proportion.

It is important to note that this formula assumes that the population is large, and the sample is random and taken from the population, so that the sample proportion will serve well for an approximate value of p.

This formula is also based on the assumption that the sample is large enough that the Central Limit Theorem applies, which states that the sampling distribution is estimated to be normal despite population distribution shape.

In summary, the formula for the mean of the sampling distribution of p is μp = p. It states that the mean of the sampling distribution of p is equal to the population proportion. This formula is based on the assumptions that the population is large, the sample is random and large enough, and the Central Limit Theorem applies.

Learn more about Sampling distribution mean here:

https://brainly.com/question/30023845

#SPJ4

A relay typically uses an electro magnet as the coil. When an electric current flows through the coil, it creates a magnetic field that can actuate the relay's internal mechanism to close or open a switch.

An electromagnet is a type of magnet that creates a magnetic field using an electric current. The electromagnet performs multiple roles in a relay. The electromagnet's primary job is to activate the relay's internal mechanism, which makes it possible for the switch contacts to close or open in response to an electric current flowing through the coil.

The armature of the relay, which is in charge of closing or opening the switch contacts, can also be attracted to or repelled by the electromagnet. Additionally, it serves as a control input for the relay, which helps to regulate power signal. Galvanic isolation between the two circuits can be achieved by using the electromagnet to isolate or separate the control circuit from the load circuit.

To learn more about electromagnets

visit-: https://brainly.com/question/17057080

#SPJ4

Mass is not a force in physics. The amount of matter that makes up an object is expressed by its mass, which is expressed in kilogrammes.

Even though the terms force, mass, and acceleration are usually employed incorrectly. Force is a physical phenomenon that, when applied to an item, causes it to accelerate in the direction from which the force was applied. The amount of matter that makes up an object is expressed by its mass, which is expressed in kilogrammes.

Acceleration is the rate at which an object's velocity alters while moving in the same direction as the unbalanced force. When the forces are in balance, there is no net force and hence no movement. The Newton's second law, which also concerns how an object moves, connects these three ideas.

Learn more about mass:

https://brainly.com/question/15959704

#SPJ4

The horizontal distance dx is calculated using the formula dx = vx * t, where vx is the ball's speed in meters per second and t is the duration of its flight.

The horizontal velocity is calculated by dividing the horizontal displacement by time. In this case, Vx is equal to 4 meters per second.

To get the range, locate the greatest observed value of the variable and deduct the least observed value (the minimum).

t_flight = t_fall

h = 0.5 * g * t^2

59.6m = 0.5 * 9.8 m/s^2 * t^2

t^2 = 59.6 m / 4.9 m/s^2

t^2 = 12.1632

t = 3.48s

Solving for the horizontal distance dx

dx = vx * t

dx = 7.7m/s * 3.48s

dx = 26.7m

The ball hit the ground at 26.7m from the base of the cliff.

To know more about horizontal distance visit :-

https://brainly.com/question/11960089

#SPJ1

The ECG (electrocardiogram) records the electrical activity of the heart, while the pulse wave is the physical manifestation of this activity that can be felt at the wrist or neck.

The timing of the QRS complex in the ECG and the start of the pulse wave do not coincide because the electrical activity propagates through the heart before the mechanical contraction of the heart muscle.

The QRS complex in the ECG corresponds to the depolarization of the ventricles, which is the electrical signal that triggers the mechanical contraction of the heart muscle.

The ECG records the electrical activity of the heart, which is faster than the mechanical contraction of the heart muscle. The pulse wave is the physical manifestation of the mechanical contraction of the heart muscle, which can be felt at the wrist or neck.

The pulse wave travels through the blood vessels to the surface of the skin, which takes some time. Therefore, the timing of the QRS complex in the ECG, which represents the electrical activity, and the start of the pulse wave, which represents the mechanical contraction, do not coincide.

For more questions like ECG click the link below:

https://brainly.com/question/1364217

#SPJ4

A meter is the metric system's standard unit of length (m). One meter (m) is divided into 100 equal centimeters (cm).

The International System of Units, abbreviated SI in all languages and sometimes pleonastically as the SI system, is the modern version of the metric system and the world's most widely used measurement system. The SI is a coherent system of measurement that begins with seven base units: the second (symbol s, the unit of time), the metre (m, length), the kilogram (kg, mass), the ampere (A, electric current), the kelvin (K, thermodynamic temperature), the mole (mol, amount of substance), and the candela (cd, luminous intensity). These are widely accepted and followed around the world. The SI unit for mass is kilogram, the SI unit for length is meter, and the SI unit for time is second.

Here,

A meter is the standard unit of length in the metric system (m). One meter (m) is equal to 100 centimeters (cm).

To know more about SI unit,

https://brainly.com/question/12750330

#SPJ4

It takes a train going 50 mph approximately 1 ½ miles (26 football fields) to stop safely.

The total stopping distance is the distance traveled by the vehicle from the moment the driver detects danger and steps on the brake until the vehicle comes to a stop.

The easiest way to calculate total stopping distance is to use the 3 second rule. When safe and legal, a U-turn allows a driver to turn a vehicle in a lane, side street, alley, or driveway. A 3-point turn is a safer way to change direction than a 2-point turn.

Stopping distance is the distance from when your body decides to stop a moving vehicle to when it comes to a complete stop.

For more information on stopping distance, visit :

https://brainly.com/question/28532160

#SPJ4

Answer:

Question 7 is "Weight force down is greater than the air drag"

Question 8 is "600 N"

Explanation:

Question 7: When looking at the forces acting on the skydiver it's important to look at what force is larger, in this case, it's the weight. If two forces are acting in opposite directions, then the body will move in the direction of the force that has a larger value, 735 N.

Question 8: When the question tells you that the forces should be balanced, it means that they should turn out to equal zero if you were to subtract the forces, or you can think of it as trying to get the side that has a smaller number to be equal to the number that is greater. Since the question specifically says the parachute will ADD drag to the equation, you solve this one by asking yourself "What number + 135 will equal 735?" This ends up being 600 N.

Hope this helps!

Cellular respiration is like a battery charger if ATP is like a battery. Substrate-level phosphorylation and oxidative phosphorylation are the two mechanisms used by our cells to produce ATP.

Plants possess three. They generate ATP when photosynthesis is taking place by using solar energy. During aerobic cellular respiration, glucose and oxygen combine to create ATP, which the cell can utilise. As byproducts, carbon dioxide and water are produced. The general equation for aerobic cellular respiration is: ATP is produced when glucose and oxygen combine in cellular respiration.

Glyceraldehyde-3-phosphate 1,3 diphosphoglycerate results in the first generation of ATP. Second, when phosphoenolpyruvate breaks down into pyruvate, ATP is created. For each of the two 3-phosphate molecules, these processes happen twice. Thus, during glycolysis, a total of 4 ATPs are created.

Learn more about respiration Visit: brainly.com/question/18169685

#SPJ4

Modern engines need to deliver improved mechanical performance, and torque measurement helps them do this by increasing their accuracy and speeding up its rotation speed for efficiency assessments, some examples are:

The degree to which a measured value resembles a reference or well-known value is referred to as accuracy. For instance, if you measure a substance's weight in the lab and come up with a reading of 3.2 kg when the true or actual weight was 10 kg, your reading is inaccurate. Your measurement in this instance is quite far from the value that is already known.

The more traditional expression is "accuracy of measurement," which is defined as "... the degree to which the outcome of a measurement agrees with the true value" on an international scale.

Depending on the engine speed, both engine power and torque are indicators. Effective and energy-saving driving is made possible by high torque. Fast acceleration and a high top speed are made possible by an engine with high power.

To know more about torque visit:

https://brainly.com/question/6855614

#SPJ4

Speed is calculated as distance times speed. You need to be aware of the units for distance and time in order to calculate the units for speed. 1, 09, 1, 95, 2, 37, and 2, 80 m/s.

To learn more about distance refer to:

https://brainly.com/question/26046491

#SPJ4

When boating on federally controlled waters in an 18-foot boat, you are legally required to have certain safety equipment on board.

This includes a life jacket or personal flotation device (PFD) for each person on board, a throwable flotation device such as a ring buoy or cushion, and a fire extinguisher.

Along with that, sound-producing devices such as a horn or whistle, navigation lights for use during night time and restricted visibility conditions, and a visual distress signal such as a flare or flag.

Additionally, boats with a motor must also have a backfire flame control device and a ventilation system if the boat is equipped with an enclosed engine compartment.

It is also strongly recommended to have a first aid kit, a marine radio, and a signaling device such as a mirror or flashlight on board.

It's important to check with local authorities as well as the boating laws of the state you are in as they may have additional rules. Failure to have the required equipment on board can result in fines and penalties.

Learn more about safety at

https://brainly.com/question/10947149

#SPJ4

Magnitude of 3i + 4j is 5 unit.

A vector's length, or magnitude, is its most fundamental physical characteristic. As a symbol, ∥a∥ stands for the magnitude of the vector a.

Using the components and Pythagoras' theorem, you may determine the magnitude of force vectors. Imagine the x-coordinate of the force as the base of a triangle, the y-coordinate as the height of the triangle, and the total force as the hypotenuse.

To find the magnitude, we can use this following formula:

∥a∥ = √ ( a₁² + a₂² )

in this case, we are given that:

a₁ = 3

a₂ = 4

Hence, the magnitude is

∥a∥ = √ ( a₁² + a₂² )

∥a∥ = √ ( 3² + 4² )

∥a∥ = √25

∥a∥ = 5 unit

To learn more about magnitude, click here:

https://brainly.com/question/27916530

#SPJ4

The force that draws things together is gravity. It is the force that attracts anything in the direction of the earth's center.

The mass of the items and the separation between them determine how strong gravity is. An object's gravitational pull is stronger the more mass it has.

The gravitational attraction between two items decreases with increasing distance. Because of this, an object drops to the ground when you drop it.

You are drawn into the middle of the planet by gravity. In addition, gravity plays a role in the development of galaxies as well as other huge formations in space, as well as maintaining planets as well as other heavenly bodies in orbit around the Sun.

To learn more about gravity at

https://brainly.com/question/14874038?referrer=searchResults

#SPJ4

Answer:

im not to sure about it

maybe check online

The drag force on the SUV is 12,899.25 N.

option A is the correct answer.

The drag force if the car has a drag coefficient of 0.6 and the air density is 1.3 kilograms per cubic meter is calculated as;

F = ¹/₂ρv²CA

where;

The drag force on the SUV is calculated as follows;

F = ¹/₂ x ( 1.3 kg / m³) x ( 35 m/s )² x ( 0.6 ) x ( 27 )

F = 12,899.25 N

Learn more about drag force here: https://brainly.com/question/23942493

#SPJ1

The lever arm is defined as the perpendicular distance between the axis of rotation and the force's line of action. torque τ = r × F

Torque is a form of force applied to an item that causes it to rotate around an axis. Force is an action that alters the motion of an item.

A three-newton force applied two metres from the fulcrum, for example, produces the same torque as a one-newton force applied six metres from the fulcrum.

Torque is used by levers to help humans lift or move items. Torque is defined as the product of a force and its distance from a fulcrum.

learn more about Torque

https://brainly.com/question/20691242

#SPJ4