Answer:
c
Explanation:
Ten seconds after starting from rest, a freely-falling object will have a speed of about ________________________
Answer:
100 m/s
Explanation:
Speed increases at a rate of 10 m/s (actually 9.8 m/s) every second. Thus after 10 seconds, the speed is 10 x 10 = 100 m/s.
Calculate torque using angular momentum
Answer:
The equation net τ=ΔLΔt net τ = Δ L Δ t gives the relationship between torque and the angular momentum produced.
If the submarine intends to submerge to a depth of 150 m, what pressure must it be designed to withstand
Explanation:
Hydrostatic pressure, P = hdg where d is density if the liquid ( water)
P= 150m × 1000kgm-3 × 10ms-2
P= 1.5 ×10^6 Pa
What is the amount of charge when 13.5a is flowing for 2 1/2 hours
Answer:
Quick Answer:
a. 8.9Ω
b. 1.2×104 C
Explanation:
Answer:
Answer provided in explanation
Explanation:
Fill out the material order form with the Quantity (number of each item) and total cost for
that item (Cost Quantity). Add the totals to ensure you do not exceed $100.
YOU HAVE $100 TO SPEND. NO BONUS POINTS FOR SAVING S.
Use the materials carefully, as they will not be replaced if you damage
them.
Material
Cost ($) Quantity
Cost x Quantity
Straw
2
Paperclip (large)
2.
String (12")
3
Tooth pick
3
Cup
5
Rubber band
5
7
Tape (0.5 m)
7
Paper (8.5" x 11")
Tissue Paper
10
Duct Tape
(.25m)
).
10
Cotton ball
12
Balloon
15
Paper plate
15
Total Cost =
Answer:
Explanation:
Material: Cost ($): Quantity: Cost x Quantity:
Straw 2$ 2x 2$ x 2
Paperclip 2$ 2x 2$ x 2
String 3$ 1x 3$ x 1
Toothpick 3$ 1x 3$ x 1
Cup 5$ 1x 5$ x 1
Rubber band 5$ 1x 5$ x 1
Tape 7$ 1x 7$ x 1
Paper 7$ 1x 7$ x 1
Tissue Paper 10$ 1x 10$ x 1
Duct Tape 10$ 1x 10$ x 1
Cotton ball 12$ 1x 12$ x 1
Balloon 15$ 1x 15$ x 1
Paper Plate 15$ 1x 15$ x 1
total: 100$
hope this really helped!!
mark me brainliest :D
A bullet of mass 6.00 gg is fired horizontally into a wooden block of mass 1.20 kgkg resting on a horizontal surface. The coefficient of kinetic friction between block and surface is 0.190. The bullet remains embedded in the block, which is observed to slide a distance 0.270 mm along the surface before stopping.
(a) What was teh initial speed of the bullet?(b) What kind of collision took place between the bullet and the block? Explain your answer comparing the values of the kinetic energy before and after the collision.(c) Calculate the impulse of the block from the moment just after the impact to his final position. Analyze the result.
Answer:
A 5.00-g bullet is fired horizontally into a 1.20-kg wooden block resting on a horizontal surface. The coefficient of kinetic friction between block and surface is 0.20. The bullet remains embedded in the block, which is observed to slide 0.230 m along the surface before stopping.
Explanation:
I WILL GIVE YOU 25 POINTS!! PLEASE HELP!!
In which scenario below does the ball have more gravitational potential energy when sitting at the top. Why?
The B figure has got more gravitational potential energy because gravity can draw it up straight rather than in a fashion (A) that would leave it with less room to travel.
What is Gravitational Potential Energy?The work (energy exchanged) per mass that would be required to transport an object to a point from a set reference location is the gravitational attraction at that location. It mimics the electric potential, with mass acting as the charge. There is a negative potential at any finite distance because the benchmark location, where the potential is zero, is conventionally indefinitely far from any mass.
The subject of potential theory is based on the gravitational potential, sometimes referred to as the Newtonian potential in mathematics. The electrostatic and popular throughout the world fields produced by ellipsoidal bodies that are uniformly charged or polarized can also be resolved using this method.
To know more about Gravitational Potential Energy:
https://brainly.com/question/19768887
#SPJ2
What is the magnitude of the total displacement of the school bus.
Answer:
400 or 500
Explanation:
The reading on a metronome indicates the number of oscillations per minute. What are the frequency and period of the metronome's vibration when the metronome is set at 180?
Answer:
Period: 1/3= 0.33 seconds.
The frequency and period of the metronome's vibration when the metronome is set at 180 is 3Hz and 0.33 s.
What is the frequency?Frequency is the number of oscillations per second.
The time period is the reciprocal of the frequency.
Given is the metronome set at 180.
The reading of metronome = frequency in seconds = 180 / 60 = 3 Hz
The time period of the metronome's vibration T = 1/3 = 0.33 seconds.
Thus, the frequency and the time period is 3Hz and 0.33 s.
Learn more about frequency.
https://brainly.com/question/25867078
#SPJ2
You discover a planet orbiting a distant star that has about the same mass as the sun, with an orbital period of 53 days. What is the planet’s orbital distance?.
Answer:
G M1 m1 / R1^2 = G M2 m2 / R2^2 gravitational equation
We can try Kepler's harmonic law
P2^2 = K R2^3
P1^2 = K R1^3 for earth
(P2 / P1)^2 = (R2 / R1)^3 dividing equations
R2^3 = (P2 / P1)^2 * R1^3
R2^3 = (53 / 365)^2 * R1^3
R2^3 = .145 R1^3
R2 = .526 R1
If one uses 93E6 miles as distance of sun from earth then
R2 = 49E6 miles
What happens to the sound an object makes when the speed of vibrations decreases (slow down)?.
During a test, a solution placed on a sheet
of metal creates bubbles. This solution is
most likely
A. Acidic
B. Neutral
C. Basic
Answer:
B. Acidic
Explanation:
Neutral an Basic solutions wouldn't create any reaction
If during a test, a solution placed on a sheet of metal creates bubbles, we can conclude that this solution is most likely Acidic.
Reaction of metals with acidAcid reacts vigorously with metal, displacing hydrogen gas in the process and this process creates bubbles of gases trying to escape from the solution.
Metals do not react basic and neutral solutions.
If during a test, a solution placed on a sheet of metal creates bubbles, we can conclude that this solution is most likely Acidic.
Learn more about reaction of metal with acid here: https://brainly.com/question/4015743
Where does the energy released in a nuclear decay reaction come from
A. Electrons
B. Chemical bonds
C. Positrons
D. The binding energy of the nucleus
A hummingbird flies 6 m along straight path upon spotting flower below it drops directly downward 8 m
What is the displacement and its direction?
Answer:
10m South East
PLEASE ANSWER NEED HELP!!!!!!!! PLEASE THE CORRECT ANSWER!!!!!!
While exercise generally benefits all of the glands, why is it particularly beneficial for the pancreas?
A.
Exercise increases the levels of the hormones that the pancreas produces.
B.
Physical activity positively impacts blood sugar, giving the pancreas less work.
C.
The pancreas can only properly regulate hormones when the body is in motion.
D.
The pancreas is structured more like a muscle than a gland, so it benefits from stretching.
PLEASE NO LINKS
Answer:
B
Explanation:
The pancreas is responsible for regulating blood sugar, exercise gives it less work to do
Excercise is particularly beneficial for the pancreas because physical activity positively impacts blood sugar, giving the pancreas less work. Correct option is B.
When you engage in physical activity, several things happen that benefit the pancreas:
Increased Insulin Sensitivity: Exercise helps improve the body's sensitivity to insulin. This means that cells become more responsive to the insulin signal, allowing glucose to enter the cells more effectively. This can help prevent insulin resistance, a condition where cells don't respond properly to insulin and blood sugar levels rise.
Improved Blood Sugar Regulation: Exercise can lower blood sugar levels by facilitating the uptake of glucose into cells for energy. This can reduce the burden on the pancreas to produce excess insulin to manage high blood sugar levels.
Reduced Risk of Type 2 Diabetes: Regular physical activity is associated with a reduced risk of developing type 2 diabetes, a condition characterized by impaired blood sugar regulation. By helping maintain healthy blood sugar levels, exercise supports the pancreas in its role of insulin production.
To know more about pancreas:
https://brainly.com/question/33716745
#SPJ3
What are the advantages and/or disadvantages of the radiation that technology has had for the human economy?
A block of mass m is initially at rest on a rough horizontal surface when a constant force F is exerted on it, as shown. The block accelerates to the right and is moving with speed v once it has moved a distance d. Which of the following equations can be used to solve for the force of friction exerted on the block by the surface?
The equations that can be used to solve for the force of friction exerted on the block by the surface is F- f = mv² / d
The constant force F is exerted on the block of mass and it accelerates with a speed, v and covering a distance of d in the direction of the force. The force of friction is an opposing force to the applied force.
Therefore,
using Newtons third law
F - f = ma
a = v/t
t = d/v
F - f = m × v / t
F- f = m × [tex]\frac{v}{\frac{d}{v} }[/tex]
F- f = m × v²/d
Therefore,
F- f = mv² / d
read more: https://brainly.com/question/18805877?referrer=searchResults
10C of charge flow through a resistor in 4 seconds. What is the current?
Answer:
Very simple. The charge Q= 20 C. the formula for Q= I* t. now I= Q/t = 20/1s = 20 Amps.
Explanation:
The current given that the charge is 10C and the time is 4 seconds is gotten as Current = 2.5 Amps
Given Data
Charge = 10 Columbs
Time = 4 seconds
Current = ?
Current, charge and time RelationshipElectrical current is defined by how much electric charge has been transferred per second, giving the following relationship:
Charge = Current*Time
Rearranging this we get:
Current = Charge/Time
The symbol for charge is Q , it is measured in coulombs (C).
The symbol for current is I , it is measured in amperes (A).
The symbol for time is T, it is measured in seconds (s).
Substituting our given Data into the expression we have
Current = 10/4
Current = 2.5 Amps
Learn more about Charge here:
https://brainly.com/question/2373424
What are the two factors that affect the gravitational pull between two objects?
Answer:
hen dealing with the force of gravity between two objects, there are only two things that are important – mass, and distance.
Explanation:
What is the scientific name for a push or a pull?
Answer:
thats a force
Explanation:
Answer:
force
Explanation:
the definition of a push or pull is force
25 n object requires a 5. 0 n to start moving over a horizontal surface. What is the coefficient of static friction?.
Answer:
μ=1/5=0.2
Explanation:
using the formula
Fs=Fn*μ
Where
Fs is the static force
Fn = Normal force
μ= coefficient
so if Fn=25n
and it requires 5 n to start moving, means the max Fs is 5n
5=25μ
μ=5/25
μ=1/5=0.2
If you eat cheese are you 1 percent cheese?
Answer:
No. Exactly what you eat doesn’t make up your internal structure.
:)
Answer:
Explanation:
Light cheeses are less than 20 %, low fat cheeses are 20 to 30%, fat cheeses are 50 to 60%, double-cream cheeses are at least 60% and triple-cream cheeses are at least 75 %.
when a viscous fluid flows in a tube, its velocity is __________.
1. A 3.5 kg object experiences an acceleration of 0.5 m/s2. What net force does the object experience
Answer:
1.75 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question we have
force = 3.5 × 0.5 = 1.75
We have the final answer as
1.75 NHope this helps you
weight of 1 kg becomes 1/6 on moon. If radius of moon is 1.76×10^6 m, then the mass of moon will be
Answer:
7.65 x 10^22kg
sorry if im wrong!
what are the slight fluctuations seen in maps of the cosmic background radiation?
The beginning of the formation of galaxies and clusters of galaxies are the slight fluctuations seen in maps of the cosmic background radiation. So, the correct option is C.
What is Cosmic background radiation?The cosmic background radiation is defined as the microwave radiation that fills all of space which is a remnant that provides an important source of data on the early universe. With a standard optical telescope, the background space between stars and galaxies is almost completely dark.
It is also called the Cosmic Microwave Background (CMB) or electromagnetic radiation filling the universe which is a residual effect of the Big Bang that happened 13.8 billion years ago. The beginning of the formation of galaxies and clusters of galaxies are the slight fluctuations seen in maps of the cosmic background radiation.
Therefore, the correct option is C.
Learn more about Cosmic Background radiation, here:
https://brainly.com/question/1310278
#SPJ6
Your question is incomplete, most probably the complete question is:
What are the slight fluctuations seen in maps of the cosmic background radiation?
a. uncertainties in the map
b. variations in the instrument's sensitivity
c. the beginning of the formation of galaxies and clusters of galaxies
d. dark matter
e. none of the above
How to find direction of magnetic field.
unlock your third eye and youll be able to see it
1. How much heat is released when a 25 g sample of water (c = 4.184) is cooled from 99 °C
to 75 °C?
A driver is moving forward and stepping on the gas pedal. Which
position-time graph best depicts this motion?
Answer:
D
Explanation:
Suppose the gravitational force between two spheres is 30 N. If the magnitude of both masses doubles, and the distance between them tripled. What is the force between the masses?
If both masses double in size and their separation between them triples. 13..33 N will be the force between the masses.
What is gravitational force?Newton's law of gravity states that each particle having mass in the universe attracts each other particle with a force known as the gravitational force.
Gravitational force is proportional to the product of the masses of the two bodies and inversely proportional to the square of their distance.
Given data:
The gravitational force = 30 N
Mass 1 =m₁
Mass 2=m₂
Distance between charges = R
Condition given:
Mass 1 = 2m₁
Mass 2= 2m₂
Distance between charges = 3R
[tex]\rm F = \frac{Gm_1m_2}{R^2}[/tex]
Case 2;
[tex]\rm F'=\frac{G(2m_1)(2m_2)}{(3R)^2} \\\\ F'=\frac{4}{9} \frac{Gm_1m_2}{R^2} \\\\ F'=\frac{4}{9} F \\\\ F'=\frac{4}{9} \times 30 \\\\ F'=13.33 \ N[/tex]
Hence, the forces between the masses will be 13..33 N.
To learn more about the gravitational force refer to the link;
https://brainly.com/question/24783651
#SPJ1
