Technician B is correct who says that hands are very porous and can easily absorb solvents such as gasoline and kerosene so they should be avoid cleaning hands.
Solvents such as gasoline and kerosene may be used by workers to clean their skin or hands following contact with oily materials. However, this practice is not recommended, because it is well known that these solvents will defat the skin. So technician B is correct to state that hands are very porous and can easily absorb solvents so avoid using these solvents to clean hands.
In the contrast, technician A is not correct to say that kerosene and gasoline are typical cleaning agents to be used to clean hands of grease and other automotive chemicals.
To learn more about cleaning agents at
https://brainly.com/question/21104459
#SPJ4
roblem 2. what are possible boundaries for studying each of the following (include sketches): ans: n/a a) wind turbine. b) a pound (for cooling the air around) in the front of a large office building. c) heat loss through a building envelope during the winter. d) curing of concrete. e) a geothermal pile (with a ground heat exchanger) for a ground source heat pump. f) an electric car. g) wastewater treatment plant
AMR recognizes that the majority of transportation providers conduct their business with a high degree of integrity.
What is geothermal pile?Geothermal energy piles (GEPs) are an environmentally friendly energy source which utilise the low-grade heat energy present in the shallow earth surface to provide heating and/or cooling to the supported structures e.g. buildings.
Geothermal energy is heat energy from the earth—Geo (earth) + thermal (heat). Geothermal resources are reservoirs of hot water that exist or are human made at varying temperatures and depths below the Earth's surface.
The piles are connected to a ground source heat pump which simply moves heat energy from one place to another. Using the same technology as a refrigerator, the highly efficient system removes the existing heat energy stored in the earth or groundwater and transfers it into the building.
To learn more about pile refers to:
https://brainly.com/question/20516566
#SPJ4
The following query
SELECT cust.CustName, pri.FullName, AS PrimaryContact, alt.FullName AS AlternateContact
FROM Customers.cust
JOIN People pri ON cust.PrimaryContactPersonID = pri.PersonID
LEFT JOIN People alt on cust.AlternateContactPersonID = alt.PersonID
will return:
a) Customers with both primary and alternate contacts
b) Customers with a primary contact and with or without alternate contacts
c) Customers with a primary contact and without alternate contacts
d) No rows
Customers with a primary contact and with or without alternate contacts There are different types of joins available in SQL: INNER JOIN : returns rows .
What is primary contact?
A primary contact refers to a third party, typically a previous employer, that serves as a reliable source for gathering pertinent information surrounding the job title, start and end dates, and any forthcoming details connected with an applicant's job history.Primary address information is specific information like building number and street in an address.A point of contact (POC) or single point of contact (SPOC) is a person or a department serving as the coordinator or focal point of information concerning an activity or program. A POC is used in many cases where information is time-sensitive and accuracy is important.To learn more about customer refers to:
https://brainly.com/question/1286522
#SPJ4
Customers with or without alternate contacts and a primary contact There are various SQL join types: INSIDE JOIN: produces rows.
Option C is correct.
What exactly is primary contact?A third party, typically a former employer, is referred to as a primary contact when it comes to gathering pertinent information about an applicant's job title, start and end dates, and any forthcoming details regarding their employment history.
Specific information in an address, such as the building number and street, is called primary address information.
A person or department serving as the coordinator or focal point of information regarding an activity or program is known as a point of contact (POC) or single point of contact (SPOC). In many situations where accuracy is crucial and information is urgent, a POC is utilized.
Learn more about query:
brainly.com/question/25266787
#SPJ4
design a recursive algorithm that will display whether it is possible to choose two integers from a list of integers such that the difference of the two equals a given value
Start the algorithm from scratch. Verify to determine if the value(s) currently being processed are identical to the base case. Rephrase the solution in terms of one or more manageable or straightforward sub-problems.
Utilize the algorithm to solve the subproblem. When formulating the response, combine the findings. Designers can shift their perspectives and relate their thinking to various subsystems at various scales through the use of recursive design processes. • Incorporating this method of thinking into design education is explored in the article in many ways. Recursion is the process of formulating a problem (or an issue's solution) in terms of (a more simplified version of) itself. For instance, if you are trying to find your way home, you should stop moving if you are already there.
To know more about the algorithm from the given link
brainly.com/question/29289479
#SPJ4
the martian calendar is unusual. there are n months in the year, and each month has an arbitrary (and potentially different) number of days. martian days are even more unusual. the rh day of the month is exactly i hours long. each martian can take xconsecutive days of vacation. on which day during the year should a martian start their vacation in order to get as many hours of vacation as possible? note: vacation time can start at some point in the current year and span over to the next year. the vacation time itself will never be greater than a whole year.
Every month as a prime number of days,. Months must have about the same number of days,. Months must be at least 3 weeks long,
What is martian days?
Mars is a planet with a very similar daily cycle to the Earth. Its sidereal day is 24 hours, 37 minutes and 22 seconds, and its solar day 24 hours, 39 minutes and 35 seconds. A Martian day (referred to as “sol”) is therefore approximately 40 minutes longer than a day on Earth.The Earth zips around the Sun at about 67,000 miles per hour, making a full revolution in about 365 days - one year on Earth. Mars is a little slower, and farther from the sun, so a full circuit takes 687 Earth days - or one Mars year.Temperatures on Mars average about -81 degrees F. However, temperatures range from around -220 degrees F. in the wintertime at the poles, to +70 degrees F. over the lower latitudes in the summer.To learn more about vacation refers to:
https://brainly.com/question/24582649
#SPJ4
Every month with a maximum number of days. There must be roughly the same number of days in a month. The length of a month must be at least three weeks.
What are martian days?The daily cycle of Mars is very similar to that of Earth. The solar day lasts for 24 hours, 39 minutes, and 35 seconds, while the sidereal day lasts for 24 hours, 37 minutes, and 22 seconds. Therefore, a day on Mars, or "sol," lasts about 40 minutes longer than a day on Earth.
A full revolution around the Sun takes approximately 365 days, or one year on Earth. The Earth travels around the Sun at about 67,000 miles per hour. A full circuit on Mars takes 687 Earth days, or one Mars year, because Mars moves a little slower and is further from the sun.
Temperatures on Mars range from about -220 degrees Fahrenheit in the winter at the poles to +70 degrees Fahrenheit in the summer at the lower latitudes. The average temperature is about -81 degrees Fahrenheit.
Learn more about calender:
brainly.com/question/24127510
#SPJ4
all of the following can cause total bus failure of the j1850 vpwm bus system, except: (1pts) question 10 - all of the following can cause total bus failure of the j1850 vpwm bus system, except: open bus wire to the bcm. bus wire shorted to ground. bus wire shorted to battery voltage. internal short in a module.
Internal short in a module, bus wire shorted to battery voltage, and bus wire shorted to ground failure is reason of the j1850 vpwm bus system .
What are the different types of bus systems?Data bus, Address bus, and Control bus are the three different categories of bus lines. Each bus route works together to communicate with the others over it. The data bus is a signal line used to transfer data from the CPU to the memory.
How does the system bus function?A system bus functions by transferring data and other types of information among various hardware components of the computer. The system bus, for instance, will identify data when you attach a universal serial bus (USB) device or port into your computer and transfer it to the central processor unit.
To know more about vpwm bus system visit :-
https://brainly.com/question/13896970
#SPJ4
W hat are electronegative gases? Why is the breakdown strength h Marks CO igher in these gases compared to 2 . that in other gases What are anode and cathode streamers?
Electronegative gases are gases that have a higher electron affinity, which means they have a greater tendency to attract and hold onto electrons. Examples of electronegative gases include chlorine, fluoride, and oxygen.
The breakdown strength, or the electrical field strength required to cause electrical breakdown in a gas, is higher in electronegative gases compared to other gases because the electronegative atoms or molecules in these gases can more readily capture free electrons and form negative ions. This reduces the number of free electrons available for conduction, making it more difficult for an electrical breakdown to occur.
Anode streamers are luminous discharges that occur in electrical breakdown in gases and that originate from the anode, or the positively charged electrode. Cathode streamers are similar discharges that originate from the cathode, or the negatively charged electrode. They are caused by the ionization of the gas and the movement of electrons in the electric field. These streamers are responsible for the initiation of the electrical breakdown.
determine (a) the rectangular components of the three forces; and (b) the magnitude and direction of their resultant.
Either graphically, with the force represented as a vector, or algebraically, the rectangular components may be computed. One needs to be familiar with at least two of the triangle's six geometric characteristics .
Components or sections of a vector that are in any two axes that are perpendicular to one another are referred to as rectangular components. An example, like the one below, can help you understand this. Informational Bonus. The magnitude of the resulting R=A2+B2+2ABcos for any two general vectors is known. The Pythagorean Theorem, F = SQRT (Fx2 + Fy2), on the other hand, can be used to get the consequent if the magnitude of the rectangular components is known.
To know more about magnitude from the given link
https://brainly.com/question/30055515
#SPJ4
Aftermarket service information is available in what format?
O CDs or DVDs
O Manuals
O Internet
O All of these are possible source formats.
Owner's manuals typically contain three primary topics: a description of the position and use of all controls; a timetable and descriptions of maintenance needed, both by the owner and by a mechanic; and specifications like oil and fuel capacity and the component numbers of any utilized light bulbs.
What type of information is commonly included in the owner's manual?An owner's manual, also known as an instruction manual or a user guide, is an instructional book or booklet that comes with practically all consumer devices that use modern technology, such as cars, household appliances, and computer accessories. The owner's manual usually contains the following information:Safety instructions, which may be lengthy for liability reasons and frequently include cautions against carrying out procedures that are unwise for the longevity of the device or the general safety of the user, are provided.For items that ship in pieces for easier assembly, see the assembly instructions.Product installation instructions; for products that must be installed in a house or place of business.For devices that track time or maintain a user-accessible state, setup instructions.Instructions for performing processes as anticipated or normally.For items with microprocessors, such as programmable calculators, synthesizers, and VCRs, programming instructions are used.Procedures for maintenance.In case the product does not function as planned, troubleshooting guidelines are provided.In case the product has to be repaired by a technician approved by the manufacturer, service facilities are available.Information regarding conformity with applicable regulatory codes, such as those relating to safety or electromagnetic interference.Technical data about the product.In rare cases, a second document is provided with warranty information.To Learn more About Owner's manuals refer To:
https://brainly.com/question/20805588
#SPJ1
It's okay to lift a short-wheelbase vehicle by the leaf springs or spring hangers.
Answer:
Not a good idea.
Explanation:
You don't want the vehicle moving while it's on a lift, so do not lift it up on a moving part.
A rectangular solid steel bar has depth d = 72 mm and height h = 75 mm. The bar is subjected to an axial load F = 335 kN. Determine the normal stress acting on the plane b-b. Input your answer in MPa to one decimal place and ignore +/- sign.
Aluminum bar carrying a higher load than steel bar
Given data;
steel abr
diameter = 5 mm
stress = 500 MPa
aluminium bar
diameter = 10 mm
stress = 150 MPa
we know
stress = laod/area
for steel bar
solving for P
P = 9817.47 N
for Aluminium bar
solving for P
P = 11790 N
aluminum bar carrying a higher load than steel bar.
What is Stress?
Stress is a force stress is the deformation caused by a force stress is the earthquake itself stress is the strain a rock undergoes when it is pulled.
The physical quantity of stress is used in continuum mechanics. It is a measurement of the strength of the forces that lead to deformation. The definition of stress is "force per unit area."
Therefore, stress = laod/area
for steel bar
solving for P
P = 9817.47 N
for Aluminium bar
solving for P
P = 11790 N
aluminum bar carrying a higher load than steel bar.
Learn more about steel bar on:
https://brainly.com/question/20166246
#SPJ1
when there is a positive pressure gradient in the horizontal x direction in a fluid, i.e. , and there are no shearing stresses, then how will the fluid move?
When the pipe is completely developed, the pressure gradient Dp/L (the pressure differential between two stations separated by L) is constant and the pressure declines linearly with distance. The pressure gradient likewise rises linearly with flow rate in this area.
Bernoulli's principle may be theoretically understood as the idea that a fluid moving from a high pressure to a low pressure area would accelerate as a result of the net force acting in the direction of motion. To keep the top plate moving at a constant speed U, the system has to be subjected to a shear stress, t = (F/A). This stress has the formula t = m (U/h), where m is the fluid's viscosity and U/h is its strain rate.
To learn more about pressure click the link below:
brainly.com/question/12971272
#SPJ4
Exercise 4. 4. 7: Make a Tree
5 points
Let's Go!
In this program, you need to make an upright tree that contains stars *. Your output should look like:
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
using a method, the asterisks are printed level-wise. We must count the number of asterisks on the level in order to accomplish this.
Define stars?A star is any large, gaseous, self-luminous celestial body that emits light as a result of its own internal energy sources.
Celestial objects like stars have the ability to generate their own light. They are enormous and extremely hot. With a little helium, they are primarily composed of hydrogen gas.
A star is a burning ball of explosions that is kept together by gravity. As a star, our sun is! It generates a significant amount of energy in the form of heat and light, which creates the ideal conditions for life on Earth.
A star is a sizable ball of glowing, hot matter in outer space. Plasma is the name of that substance. Stars are kept in place by gravity. Smallest stars are called reddwarfs because they are red and small.
To learn more about asterisks refers to:
https://brainly.com/question/13402931
#SPJ4
for the following unit operations, (a) identify the governing mass balance equations, (b) determine the number of independent variables, (c) determine the number of control variables, and (d) design at least one combined feed forward/feedback control loop for each unit operation.
We need to understand, in particular, how the controlled variable reacts to changes in the disturbance and manipulated variables.
Describe unit operations.Unit operations involve a physical change or chemical transformation, such as isomerization, crystallisation, evaporation, filtration, polymerization, and separation.
When compared to unit processes, unit operations involve physical changes. Unit process is only a secondary activity, while unit operation is just the primary activity.
The unit operation of distillation separates two constituents by their respective boiling points. The end result will be similar to flashing, with more of the lower-boiling compound(s) leaving at the top of the column and more of the higher-boiling compound(s) falling to the bottoms.
To learn more about controlled variable refers to:
https://brainly.com/question/15575272
#SPJ4
Etimate the hourly production of a hovel with bucket capacity of 0. 96 m³ & cycle time of 30 ec. Shovel i ued to excavate hard oil in an open area. The excavated earth ha to be loaded in waiting dump truck, poitioned at 60°. Equipment i utilized for 50 minute in 1 hour
Divide the overall operation's time by the quantity of buckets or cycles to determine the excavator cycle time.
How big a bucket can it hold?A bucket can carry as much material as it contains plus additional material piled on top of it. The Heaped or Rated Capacity is used to describe this. The angle at which the material being handled is resting determines how much material will be piled on top of the bucket (heap).
Use the S3 console and select the bucket you want to view to find out how big a specific S3 bucket is. The total number of bytes stored over time is depicted in a graph found under Metrics.
To learn more about capacity refers to:
https://brainly.com/question/15158174
#SPJ4
from a psychodynamic perspective, the lifespan development of a couple or family is substantially impacted by the early development of the individuals within the system. as such, which one of the following statements is true?
The psychological forces and impulses that people possess that explain why people behave and how they become who they are are the subject of psychodynamic theories.
The concepts come from Sigmund Freud's psychoanalysis, which placed a strong emphasis on the unconscious mind as the root of psychological suffering and dysfunction. A childhood trauma that has since caused this tendency, obsessive hand washing, may be connected. An anxious experience from infancy may be the root of nail biting. A childhood occurrence that made a youngster afraid of being alone in a public place could lead to adult agoraphobia. explanation or interpretation of behavior or mental states in terms of mental or emotional forces or processes. The psychology of mental or emotional forces or processes that develop, particularly in early life, and their consequences on behavior and mental states.
To learn more about childhood, refer to the link:
https://brainly.com/question/18644919
#SPJ4
Simple geometry can compute the height of an object from the object's shadow length and shadow angle using the formula: tan(angleElevation) = treeHeight / shadowLength.
1. Using simple algebra, rearrange that equation to solve for treeHeight.
2. Write a statement to assign treeHeight with the height calculated from an expression using angleElevation and shadowLength.
code:
import java.util.Scanner;
import java.lang.Math;
public class TreeHeight {
public static void main(String [] args) {
double treeHeight = 0.0;
double shadowLength = 0.0;
double angleElevation = 0.0;
angleElevation = 0.11693706; // 0.11693706 radians = 6.7 degrees
shadowLength = 17.5;
/* Your solution goes here */
System.out.print("Tree height: ");
System.out.println(treeHeight);
return;
}
}
Use these steps to calculate the object's height:
Add your height to the shadow length of the object.
Subtract your shadow length from that response.
The equation h(t) = -16t2+256t, where t is time in seconds, yields the height of an object, h(t). Determine the object's highest point and the moment it touches the ground. 2) Paige intends to launch a summertime lawn-mowing business. Height is defined in mathematics as the vertical distance separating an object's top from its base. On occasion, it is referred to as "height". In coordinate geometry, an object's height is calculated along the y-axis and is referred to as height.
Learn more about geometry, at:
https://brainly.com/question/19241268
#SPJ4
A series RLC circuit with R = 10 Ω, C = 80 μF, and L = 10 mH is connected across a 200 Hz, 15 V ac source. The total impedance, expressed in polar form
The total impedance, expressed in polar form will be 10.337 * e^(j 14.676°).
How to calculate the impedance?R = 10 Ω,
C = 80 μF = 80 x 10⁻⁶ F
L = 10 mH = 10 x10⁻³ F
XL = 2πfL
= 2π (200)10 * 10⁻³
= 4π
= 12.566
Xc = 1 /2πfC
= Xc = 1/2π(200)80 x 10⁻⁶
= Xc = 9.947
The total impedance = R + jXL - jXc
= 10 + j(12.566 - 9.947)
= 10 + j 2.619
The total impedance is 10 + j 2.619
| Z | = 10.337
Ф = tan⁻¹ ( 2.619 /10) = 14.676°
Polar Form = 10.337 * e^(j 14.676°)
Learn more about circuit on:
https://brainly.com/question/26064065
#SPJ1
A series RLC circuit with R = 10 Ω, C = 80 μF, and L = 10 mH is connected across a 200 Hz, 15 V ac source. The total impedance, expressed in polar form, is?
when not air cooled, the heat generated by the motor in a hermetic motor compressor assembly is removed by what?
When not air-cooled, the heat produced by the motor in a hermetic motor compressor assembly is eliminated by refrigerant gas.
A compressor in the refrigerant is said to be a hermetically sealed compressor when both the compressor and motor operate on the same shaft and both are enclosed in a common casing. These kinds of compressors eliminate the use of a crankshaft seal, which is vital in open-type compressors to prevent leakage of refrigerant.
Typical refrigerants include gases such as fluorocarbons, which are chemical compounds of fluorine and carbon. They were formed mainly as refrigerant gases to be used for air conditioners and refrigerators.
You can learn more about refrigerant gases at
https://brainly.com/question/10812146
#SPJ4
in the following amplifier circuit, the input signal is v. this is a 1khz sinusoidal signal with a peak amplitude of 1.5 v. which one of the options could be the output signal, v o (t)? assume an ideal op-amp. dc power supplies are used to power up the op-amp.
Signals will get distorted if an op amp is used over its slew rate limit.
How do you figure out an op-output amp's voltage?This is amplifier circuit a 1.5 v peak-to-peak 1 kHz sinusoidal waveform.might represent the output signal, v o (t)
Equations. AV input Equals V out
Op-amp inversion: A = - R2/R1
A = 1 + R2/R1 for non-inverting op-amps.
The input resistance of a perfect op amp is infinite.
Signals will get distorted if an op amp is used over its slew rate limit. The sine wave example provides the clearest illustration of this. At the zero crossing point, voltage changes at their fastest pace.
1/(40pi) * cos(2000pi*t - 1)
To learn more about amplifier circuit refer to:
https://brainly.com/question/29645942
#SPJ4
If an op amp is used at a rate higher than its slew rate limit, signals will become distorted assuming an ideal op-amp. dc power supplies are used to power up the op-amp.
What is an enhancer circuit?A circuit known as an electrical or electronic amplifier generates an output signal that is a larger replica of its input by utilizing an external power supply. A speaker's voice is amplified with an audio amplifier, an easily recognizable application, to make it easier for them to be heard in large spaces.
What purpose does the amplifier circuit serve?In marine automation, control, and other electronic circuits, amplifiers or operational amplifiers (op-amps) are frequently utilized. Typically, a voltage or a current signal serves as the applied input signal. An amplifier's goal is to produce a signal that is larger than the input signal.
To learn more about amplifier circuit:
brainly.com/question/29645942
#SPJ4
in the following code segment, assume that the string str has been properly declared and initialized. the code segment is intended to print the number of strings in the array animals that have str as a substring. String[] animals = {"horse", "cow", "goat", "dog", "cat", "mouse" }; int count = 0; for (int i = 0; i <= animals.length; i++) { if (animals[i].indexOf(str) >= 0) { count++; } > System.out.println(count); The code segment does not work as intended. Which of the following changes should be made so the code segment works as intended? The Boolean expression in the for loop header should be changed to i < animals.length. The Boolean expression in the for loop header should be changed to i < animals.length - 1. The Boolean expression in the for loop header should be changed to i The code segment does not work as intended. Which of the fo ving changes should be made so the code segment works as intended? The Boolean expression in the for loop header should be changed to i < animals.length The Boolean expression in the for loop header should be changed to i< animals.length - 1. O The Boolean expression in the for loop header should be changed to i < animals[i].length O The condition in the if statement should be changed to animals().equals(str). O The condition in the if statement should be changed to animals[i].substring(str).
The for loop header's Boolean expression ought to be changed to i animals.length.
Which of the following describes how the arrayMethod() method manipulates the nums array?The method call's attempt to access a character at index 7 in a string whose last element is at index 6 will now result in a run-time error. The method call worked correctly before the change. An array is a type of data structure in which elements are stored linearly. It is stated that the data type-specific elements of the array exist.
What are the program's outcomes?# Does Stdio H belong to it?Stdio contains the printf function's definition. h file's header. Everything will be printed in double quotes on the screen. Therefore, Hello World will be published in this circumstance.
To know more about Boolean expression visit :-
https://brainly.com/question/13265286
#SPJ4
Consider a relation S with the following schema: S(a int, b float, c char(1)). Consider the following small instance of S:Table SA B C1 57.0 F2 12.0 S3 4.0 TAssume that S is stored in a heap file on disk. Assume also a page size of 8KB (8192 bytes), 4-byte integers, and 8-byte floats.1. Draw a schematic representation of the Heap file page on disk storing the S instance. 2. The size of each S tuple in bytes is 4+8+20 or 32 bytes. How many S tuples fit on one page? Assume a page header is 20 bytes. How many pages are necessary to hold an instance of S with 1000 tuples (remember the space necessary for the page header)?3. Perform the following sequence of operations drawing schematic representations at each step.Insert(4,14.8, F);Delete(2);Update(1) to (1,59.0, F)
By converting the data to a file format that most programs can use, the best way to ensure long-term data storage is to be sure that the data is safe.
This typically refers to open, or non-commercial, file formats. However, when doing the analysis step, researchers must employ the file types and software applications that are most appropriate for their work. All raw data must typically be retained for a minimum of three years after a study is finished per regulatory requirements. If the study plan calls for the long-term storage of PII (in paper or electronic form), all data files must be kept safely in a safe or lockable filing cabinet in a secure location. The setItem() method, which requires a key and a value as inputs, must be used to store data. 'name', 'Jonh Doe'); localStorage. To keep an array, follow these steps.
To know more about software from the given link
https://brainly.com/question/28224061
#SPJ4
Write a static method that accepts an int size as a parameter and outputs the following pattern using for loops: When size is 5, it will output: 25 15 941 25 16 9.4 25 169 25 16 25 When size is 3, it will output: 941 9
The class name and a dot (.) followed by the name of a method are used to access them. When defining a method, they are stated using the word "static."
Without creating a new object, static methods can be accessed. A Java static method can accept many arguments, and as a result, it can have several parameter variables, just like a mathematical function. A static method (or static function) is a method that is defined as a member of an object but can only be accessed from the constructor of an API object, not from an instance of the object generated using the constructor. If a variable is static, memory is only allotted to it once, and all objects of the class can access it. You can create a static variable by doing.
To know more about variables from the given link
https://brainly.com/question/25342371
#SPJ4
In a SQL statement, the _____ is the name of the segment that executes first
The primary query is never run before the sub-query; it always comes first. First, subqueries are resolved. The outer query uses the subquery's output as its input.
In what sequence are the SQL statements executed?
The inner query is referred to as a subquery, while the outer query is referred to as the main query. The outcomes of each subquery are sent on to the main query after completion. SQL queries evaluate clauses in a certain order, much as how mathematical operations adhere to the PEMDAS or BIDMAS rules. When executing clauses in queries, the following steps are taken:
1. Using FROM/JOIN, the correct data are originally located.
2. WHERE: used to remove records that don't meet the criteria.
3. GROUP BY: This function divides the data into several groups according to the content of one or more columns.
Learn more about Query here:
https://brainly.com/question/30273762
#SPJ4
Identify the use of the inset keyword used in the box-shadow property.
A. It is used to mention the shadow color.
B. It is used to create an interior shadow.
C. It is used to measure the distances of the shadow from the text in horizontal and vertical directions.
D. It is used to define the amount by which the shadow is stretched
Determine where the box-shadow property makes use of the inset keyword. It is used to cast a shadow inside.
The radial gradient function's default shape value is which of the following?Ellipse is the shape's default value. size: The gradient's size is determined by this parameter. The potential values include: closest side, closest corner, and farthest side (the default).
How can I use CSS to change the color of a PNG image?The following CSS styles can be used to change the color of a PNG image: filter: none, blur, brightness, contrast, drop-shadow, grayscale, hue-rotate, invert, opacity, saturation, sepia, url, initial, and inherit functions; The image's visual effect is set by using the aforementioned property.
To know more about box-shadow visit :-
https://brainly.com/question/15021258
#SPJ4
1. The results shown in Table were obtained at failure in a series of triaxial tests on speci mens of a saturated clay initially 38 mm in diameter by 76 mm long. Determine the valu es of the shear strength parameters with respect to (a) total stress and (b) effective stres S The initial values of length, area and volume for each specimen are: lo 76 mm; Ao=1135 mm²; Vo = 86 x 103 mm³ (a) (b) Type of test Undrained Drained All-round pressure (kN/m²) 200 400 600 200 400 600 Axial load (N) 222 215 226 403 848 1265 Axial deformation (mm) 9.83 10.06 10.28 10.81 12.26 14.17 Volume change (ml) I coo 6.6 8.2 9.5 625
The values of the shear strength parameters with respect to (a) total stress and (b) effective stress should be determined. Table 1 of test categories (kN/m) pressure everywhere
What's the synonym for effective?
Effective can also be referred to as effectual, efficacious, and efficient. Effective emphasizes the actual creation of or the ability to produce an effect, even though all of these words indicate "creating or capable of producing a result."
successful in getting the desired outcomes: The usage of shadow in the lighting for the production was quite effective. She is a fantastic educator.
Know more about respect Visit:
https://brainly.com/question/19711470
#SPJ1
The great treasures of King Tut are on display in the Giza Museum in Cairo. The layout of the museum is shown in Figure 9.7, with the different rooms joined by open doors. A guard standing at a door can watch two adjoining rooms. The museum’s security policy requires guard presence in every room. Formulate the problem as an ILP to determine the smallest number of guards.
The smallest number of guards that are required will be 4.
How to calculate the number of guards?Let Xj be the binary integer such that Xj=1 when a guard is deployed at the j-th door and Xj=0 otherwise for j = 1,2,..,8.
Minimize Z = total number of guards = X1 + X2 + X3 + X4 + X5 + X6 + X7 + X8
Subject to,
Each room will be seen by at least one guard. So,
X1 + X2 >= 1 (Room A)
X1 + X3 >= 1 (Room B)
X2 + X4 >= 1 (Room C)
X4 + X5 >= 1 (Room D)
X3 + X5 + X8 >= 1 (Room E)
X6 = 1 (Room F)
X6 + X7 >= 1 (Room G)
X7 + X8 >= 1 (Room H)
Xj = {0,1}
--------------------------
LINDO Code
Min X1 + X2 + X3 + X4 + X5 + X6 + X7 + X8
s.t.
Room_A) X1 + X2 > 1
Room_B) X1 + X3 > 1
Room_C) X2 + X4 > 1
Room_D) X4 + X5 > 1
Room_E) X3 + X5 + X8 > 1
Room_F) X6 = 1
Room_G) X6 + X7 > 1
Room_H) X7 + X8 > 1
Learn more about linear Programming on:
https://brainly.com/question/14309521
#SPJ1
The great treasures of King Tut are on display in the Giza Museum in Cairo. The layout of the museum is shown in figure below, with the different rooms joined by open doors. A guard standing at a door can watch two adjoining rooms. The museum’s security policy requires guard presence in every room. Formulate the problem as an ILP in PYTHON to determine the smallest number of guards.
Donna makes a website feature that will recommend books to users by asking questions about their likes and dislikes. There's a bug in the program, so she decides to ask her friend Martha to look over her code. Before Martha looks at the code, she asks Donna to describe it. Which of the following parts of Donna's description is an abstraction? Select TWO answers. A "The ask method prints out a multiple choice question to the user and then records the user's answer in a list." B "After all the questions have been asked, the match method retrieves three book recommendations for each answer selected and puts them in a new list." С "From there, the match method uses the selection sort algorithm to sort the list of recommendations D "Finally, the match method uses a loop to compare each item in the list to the previous item. If there are two items that are the same, that item is printed out for the user to see."
The "ask method" prints a multiple-choice question to the user, who subsequently enters a response, which is then listed.The match approach "retrieves three reading material for each response picked and adds them to a new list after all questions have been answered."
Explanation: Without going into great depth on how the code works, each of these descriptions provide Martha a general understanding of what the code accomplishes.
Which one of the following procedural abstraction qualities is desired?Code that is more understandable and reusable is one of procedural abstraction's desirable qualities.Choice "A" suggests that the software is more reusable because it is only confined to the extent that the users' needs dictate.
To know more about reading material visit:
https://brainly.com/question/6594426
#SPJ4
Given the tapered bar/axial element below, determine the exact displacement interpolation function and the associated exact shape functions. Show all intermediate steps.
In FEM, nodal displacement is calculated using the matrix equation shown below: [K] is the global stiffness matrix, [u] is the displacement (solution) vector, and [F] is the vector of forces.
Then, they are interpolated using shape functions—basically, polynomials of various orders—over complete elements. Although linear shape functions, such as a straight line used to approximate a distance between two places, are the most fundamental, quadratic shape functions, such as a quadratic curve, are becoming far more prevalent. There are even even higher order shape functions (such as cubic), but they are uncommon in real-world applications. Gauss Points, not nodes, are used to compute an element's stress. You can search up the locations of the GPs for any specific type of element, but let's talk about singles here.
Learn more about specific here-
https://brainly.com/question/19819958
#SPJ4
An example of a right explicitly protected by the Constitution as drafted at the Constitutional Convention is the ______. a.right to free speech
The right to a writ of habeas corpus is a right that is explicitly protected by the Constitution as it was written at the Constitutional Convention.
What was the original purpose of the Constitution's Bill of Rights?The civil liberties of US citizens are listed in the Bill of Rights, which was drafted alongside the Constitution. The right to a fair trial, freedom of speech, and freedom of religion are among these liberties. Citizens were granted more civil liberties through subsequent Constitutional amendments.
What is the constitutional justification for the right to privacy?The following is the constitutional basis for the right to privacy: a particular guarantee provided by the Fifth Amendment. The conclusion of the Supreme Court that, despite not being explicitly stated, a number of Amendments contain the right to privacy.
To know more about Constitutional Convention visit :-
https://brainly.com/question/11662939
#SPJ4
1.4-8 a car weighing 130 kn when fully loaded is pulled slowly up a steep inclined track by a steel cable (see figure). the cable has an effective cross-sectional area of 490 mm2, and the angle a of the incline is 308. (a) calculate the tensile stress st in the cable. (b) if the allowable stress in the cable is 150 mpa, what is the maximum acceptable angle of the incline for a fully loaded car?
A steel cable is slowly pulled up a steeply inclining track by a car that weighs 130kN when fully loaded; (b) the maximum allowable incline angle is 30°.
What is a proper angle?The maximum angle of incidence where the medium (typically air) meets the core (n1) is known as the acceptance angle () for an optical fibre. This angle determines how light enters and travels along the optical fibre. The optical fiber's numerical aperture is the sine of the acceptance angle.
The acceptance angle, which is calculated as the acceptance cone's half-angle, serves as a gauge of a fiber's capacity to gather light (the maximum cone of light that can enter or exit the fiber.) Be aware of what follows: The acceptance cone is triangular in shape.
The NA is related to the cutoff angle, which is the maximum acceptance angle (max) (Figure 1). At the intersection of the fiber's core and cladding, rays with an angle of incidence of maximum are totally internally reflected (TIR). These rays continue to be trapped in the core as they travel down the fibre.
To learn more about angle refers to:
https://brainly.com/question/28451077
#SPJ4
