The given statement "sysinternals is a collection of commercial software utilities from several vendors that is bundled and sold as a suite in order to support specialists" is false because it incorrectly specifies that sysinternals is sold by multiple vendors.
Sysinternals is a free suite of cybersecurity tools for Windows users that help them manage, troubleshoot, and diagnose their Windows systems and applications. In other words, sysinternals is a suite consisting of more than 70 freeware that is used to monitor, manage and troubleshoot the Windows operating system, which is free and owned by Microsoft.
Therefore the given statement is false because it states sysinternals suit is not free and owned by multiple vendors.
You can learn more about Microsoft at
https://brainly.com/question/28167634
#SPJ4
A Virtual Private Network (VPN) uses a particular layer from the OSI reference model to carry an encrypted payload that actually contains an entire second set of packets. Which layer is used?
Transport layer is used when a Virtual Private Network (VPN) uses a particular layer from the OSI reference model to carry an encrypted payload that actually contains an entire second set of packets.
What is VPN?Virtual private network, or VPN, is the name of a service that creates a private and secure connection to the internet. In order to safeguard your private information and communications, conceal your IP address, and enable secure use of public Wi-Fi networks, a VPN creates an encrypted tunnel.
Your personal information and online privacy are protected by a VPN. Read our comprehensive VPN guide to learn what a VPN does, how it operates, and how it can protect you. By downloading a strong and lightning-fast VPN app, you can immediately increase your privacy and learn the practical meaning of a VPN.
Learn more about VPN
https://brainly.com/question/29432190
#SPJ4
which of the following best describes ways in which technology strategy is different from conventional competitive strategy? a) Initially, positioning may be impossible because there may be no suppliers, no customers, and no clearly identified competitors.b) Timing is a critical aspect of a technology strategy.c) All answers are correct.d) Technology strategy must deal with high degrees of risk and uncertainty.e) A technology strategy has to go beyond choosing a position in an industry to choosing an industry.
At their heart, businesses competing through international technology-based strategies rely on an organizational framework that makes use of a strong culture to bind human capital, senior leadership, and resources together in ways that foster and develop key competencies and capabilities.
What is technology-based competition?An international technology-based competitive strategy is subject to a wide range of influences at three levels: (1) the organization system (ORGSYS) and within-firm influences, (2) the competitive or task environment, which includes industry specific and globalization dynamics, and (3) the external domestic and international.The definition of a technology strategy is the development of a comprehensive business plan that includes guiding principles, goals, and strategies for leveraging technology to meet organizational goals.Using technology in your business plan has five benefits.Select specialized technological remedies.Increase the efficiency of the organization.Strengthen teamworkDecide on long-term targets and goals.Bolster safety.To Learn more About technology-based strategies refer TO:
https://brainly.com/question/29679199
#SPJ4
what is the best malware cleaner to use in addition to a security program for chrome
Best malware cleaner for chrome as security program is Nortan360 which is great antivirus.
Malware: Any intrusive program created by cybercriminals (often referred to as "hackers") to steal data and harm or destroy computers and computer systems is referred to as malware, which is short for "malicious software." Malware types that are frequently encountered include worms, Trojan horses, spyware, adware, and ransomware.
Nortan360:Gen Digital Inc. (formerly Symantec) created Norton 360, a "all-in-one" security solution for the consumer market. It was initially introduced in 2007, and it was withdrawn in 2014. Norton Security, its replacement, kept its functionality.
Know more about malware:
https://brainly.com/question/14276107
#SPJ4
Rizwan, a data analyst, is generating a report by pulling data from multiple databases and analyzing it. The data processing application is resource-intensive, so Rizwan wants to ensure that other applications do not consume resources that this application needs.How can Rizwan boost the performance of the data processing application?
Reduce the actual memory while increasing the virtual memory Rizwan boost the performance of the data processing application.
What is a data analyst?
To find the solution to a problem or provide an answer to a question, a data analyst gathers, purifies, and analyses data sets. They work in a variety of fields, including as government, business, finance, law enforcement, and science.
What types of clients ought a company to focus on in its upcoming advertising campaign? Which age range is most susceptible to a specific disease? What behavioural trends are associated with financial fraud?
As a data analyst, you might have to respond to inquiries like these. Learn more about what a data analyst does, what skills you'll need, and how to get started on your path to becoming one by reading on.
Read more about data analyst:
https://brainly.com/question/28375055
#SPJ4
Which of the following answers refer(s) to the characteristic feature(s) of Category 5 (Cat 5) cabling? (Select all that apply) :O Coaxial cabling100 Mbps Ethernet (100BaseT networks)F-type connector55-meter cable segment length1 Gbps Ethernet (1000BaseT networks)O BNC connector100-meter cable segment lengthO RJ-45 connector10 Gbps Ethernet (10GBaseT networks)O Twisted-pair copper cablingFiber-optic cabling
Cat 5 cabling is a type of twisted-pair copper cabling that uses an RJ-45 connector.
What is copper?Copper is a chemical element with the symbol Cu and atomic number 29. It is a soft, malleable, and ductile metal with very high thermal and electrical conductivity. A freshly exposed surface of pure copper has a pinkish-orange color. Copper is used as a conductor of heat and electricity, as a building material, and as a constituent of various metal alloys, such as sterling silver used in jewelry, cupronickel used to make marine hardware and coins, and constantan used in strain gauges and thermocouples for temperature measurement.
It is commonly used to support 10/100/1000 Mbps Ethernet (100BaseT, 1000BaseT, and 10GBaseT networks) and has a maximum length of 100 meters. Cat 5 cabling does not support fiber-optic cabling nor does it use F-type or BNC connectors.
To learn more about copper
https://brainly.com/question/29741976
#SPJ4
To get data from a text file, the Scanner and File class are used. a loop structure is used. Which of the following is used to control the loop?
A. a boolean variable
B. hasNext() method in Scanner class
C. end of file pointer
D. the loop stops automatically when all records are read.
The hasNext() method in the Scanner class is used to check if there is another line in the text file that can be read.
What is Scanner?A Scanner is a device that reads text or an image and converts it into a form that a computer can understand and process. It is often used to capture data from printed documents and forms, such as health records, financial documents, and business forms. Scanners are also used to create digital copies of artwork and other items. Scanners are available in different types and sizes, from small handheld models to large office machines. The most common types of scanners are flatbed, sheet-fed, and handheld. Flatbed scanners use a single flat surface to capture images, while sheet-fed scanners use rollers to draw documents through the scanner. Handheld scanners are designed for portability and are often used for data entry in small offices.
The loop will continue to run if there is another line to be read, and it will exit the loop if there are no more lines to be read.
To learn more about Scanner
https://brainly.com/question/24937533
#SPJ4
which of the following are human considerations in process technology? multiple select question. training safety job loss initial costs consultants
The Five Human Factors technique is all about researching the physical, mental, social, cultural, & emotional aspects of a comprehensive consumer experience. All Five Human Factors enhance field consumer observations once an innovation project is at the observation phase.
What exactly are human factors at work?
Human factors, then, is concerned with what people are asked to do (the task and its characteristics), who they are doing it with (the individual and their competence), and where they are working (the organisation and its attributes), all of which are influenced by the larger societal concern, both local and national.
What do human factor techniques entail?
The study of human factors (HF) examines how people use technology.
To know more about technology visit:-
brainly.com/question/9171028
#SPJ4
when stacking, interlocking rows should be used to minimize the risk of any becoming destabilized and falling.
The statement is True.
This is because when stacking items it is important to use interlocking rows to minimize the risk of any becoming destabilized and falling.
This can be achieved by placing the items in a way that the weight of each item is supported by the one below it, creating a stable structure.
For example, if you are stacking boxes, you would want to place the corners of one box into the crevices created by the corners of the box below it. This creates a stable structure that is less likely to tip or fall over.
Another way to minimize the risk of items becoming destabilized and falling is to use appropriate materials to secure the stack. Strapping or shrink-wrap can be used to hold the items together and prevent them from shifting or falling over.
Also, using pallets or other base materials to elevate the stack off the ground can also help to stabilize it and reduce the risk of it falling over.
It's also important to consider the weight and size of the items being stacked, stacking heavy items on top of lighter ones can be dangerous because the weight of the top items may cause the bottom items to collapse. It is also important to consider the height of the stack and make sure it is not too tall, as a tall stack can be more likely to topple over.
To learn more about stacking, use the link:
brainly.com/question/24671121
#SPJ4
Consider the following class definitions. Assume Fullname and Personality are other user-defined classes. Which statement below is true? A) Fullname "is-a" Human and Human "has-a" name B) Baby "is-a" Human and Human "has-a" Baby C) Baby "is-a" Human and Human "has-a" Personality D) Human "has-a" Personality and Fullname, and Personality "is-a" Human E) Human "has-a" Baby
The following class definitions of Fullname and Personality are other user-defined classes are Baby "is-a" Human and Human "has-a" Personality.
What is class?
Class in computer programming is a special type of data type that holds the properties and methods of an object. It is a template or blueprint that describes the details of an object. A class can be divided into fields, properties, and methods. Fields are the variables that store data. Properties are properties of the object. Methods are functions that act on the object's data. Classes are used to create objects which are instances of the class. Objects can be used to store data, manipulate data, and even carry out tasks. Classes are an essential part of object-oriented programming (OOP). OOP is a programming paradigm based on objects, which are data structures that contain information and code. Classes are used to define and group related objects, making them easier to manage and use.
To learn more about class
https://brainly.com/question/21842233
#SPJ4
to move an inline picture, which of the following should be done? a. click and drag the picture to the desired location. b. ctrl shift click and drag the picture to the desired location. c. ctrl click and drag the picture to the desired location. d. alt click and drag the picture to the desired location.
Using control click we can move and drag inline picture at desired location.
Inline picture: Images enhance a webpage's value by completing the user's aesthetic and visual experience. Images add value, convey information, and serve as ornamentation. Additionally, there are many types of images in terms of development. Users mostly encounter two sorts of images on websites: inline images and background images. Both offer excellent chances to inform an audience, and each also poses its own special problems to ensuring that the highest standards of web development are met. users envision inline pictures when they see an image. When compared to backdrop pictures, they are full-image displays. The user can gain value and information from inline graphics. Inline pictures can be used with many different types of files, including jpg,
For move inline picture we can use control click and drag image easily.
Know more about inline picture:
https://brainly.com/question/15177582
#SPJ4
list [11, 35, 6, 0] display (mystery (list)) procedure mystery (list) { sum 0 for each item in list { sum sum item } return sum / length (list) }
The given procedure mystery(list) takes in a list as an argument and performs the following actions:
Initializes a variable sum to 0
Loops through each item in the list
Adds the current item to the sum variable
After the loop, it returns the value of sum divided by the length of the list.
When the list [11, 35, 6, 0] is passed to the procedure, the following steps occur:
The variable sum is initialized to 0
The first item in the list is 11, so 11 is added to sum
The second item in the list is 35, so 35 is added to sum
The third item in the list is 6, so 6 is added to sum
The fourth item in the list is 0, so 0 is added to sum
The procedure returns the value of sum (52) divided by the length of the list (4), which is 13
So the output of the procedure when passed the list [11, 35, 6, 0] is 13.
A software architect is designing the database for the Department of Motor Vehicles in their state. They need to carefully consider which information in each user account should be considered PII, so that they can better protect those fields in the database. Which of the following pieces of user information is least likely to be considered PII?
The type of vehicle owned by the user is not likely to be considered PII. This is because this information does not necessarily identify a user and it is not used to verify any information about them.
What is information?Information is a general term for everything with the capacity to inform. Information is most fundamentally concerned with the interpretation of what may be sensed. Any naturally occurring process that is not entirely random, as well as any discernible pattern in any medium, can be said to convey some level of information. Other occurrences and artefacts, such as analogue signals, poems, photographs, music and other sounds, and currents, convey information in a greater continuous form than digital signals and many other data do. Information is not knowledge in and of itself, but rather the interpretational meaning that can be drawn from a representation.
Additionally, this type of information could be easily obtained from other sources and is not considered as sensitive as other pieces of information such as a driver's license number or address.
To learn more about information
https://brainly.com/question/26986135
#SPJ4
You are working with the penguins dataset. You create a scatterplot with the following code: geom_point(mapping = aes(x = flipper_length_mm, y = body_mass_g)) You want to highlight the different penguin species on your plot. Add a code chunk to the second line of code to map the aesthetic shape to the variable species. Which penguin species does your visualization display?
In smaller datasets, adding a tiny degree of random variation to the location of each point is an effective technique to manage overplotting brought on by discreteness.
According to the documentation for geom jitter(), there are two arguments for jitter: height and width, which determine how much space is moved horizontally and vertically. With the help of the geom point() function, which is one of many geom functions included with ggplot2, you may add a layer of points to your plot to produce a scatterplot. The discrete variable color (for diamond colors) by the discrete variable cut will be plotted using the diamonds data set [in ggplot2] (for diamond cut types). The plot is produced using the geom jitter function ().
Learn more about variable here-
https://brainly.com/question/12296810
#SPJ4
What will be the result after the following code is executed, assume the code has been compiled?
int counter = 1;
final int MAX = 7;
while (counter <= MAX){System.out.print(counter + " ")counter = counter - 2;}
A. The program displays: 1 3 5 7
B. The program displays value: 7 5 3 1
C. The loop cannot run.
D. The loop is infinite.
Counter num. length is the instruction that should replace /* Missing Loop Header */ in order for the code section to function as intended ().
The software serves as an example of loops (the while loop). While statements are used in programs to carry out repeated actions. The while loop body must be run as long as the counter is lower than the length of the string num for the string to return 23456. Therefore, counter num.length is the loop header that is missing ().When a loop's code block is repeated until a condition is met and this condition is checked before the block is run, the loop is said to be pertest. To put it another way, a pertest loop tests the underlying condition first and then executes the loop's body if it is true. PS: The post-test loop is another sort of loop that performs the exact opposite of what the pertest loop does. The do-while loop is an illustration of this kind of loop.
Learn more about Loops here:
https://brainly.com/question/26171001
#SPJ4
a flowchart is a way to visually represent an algorithm. the flowchart below uses the following building blocks. a table is shown with two columns titled block and explanation. in the first row it reads oval then a picture of an oval in the left column, and the start or end of the algorithm in the right column. in the second row it reads rectangle then a picture of a rectangle in the left column, and one or more processing steps, such as a statement that assigns a value to a variable in the right column. in the third row it reads diamond then a picture of a diamond in the left column, and a conditional or decision step, where execution proceeds to the side labeled true if the condition is true and to the side labeled false otherwise in the right column. in the fourth row it reads parallelogram and a picture of a parallelogram in the left column, and displays a message in the right column. a flowchart of an algorithm is shown. at the top is an oval with the word start in it. an arrow points down from start to a rectangle in which it reads count left arrow 1. an arrow points down from this rectangle to the top of a diamond in which it reads count less than 5. an arrow points down from the count less than 5 diamond to a rectangle in which it reads count left arrow count plus 1, and the word true is written next to the arrow pointing down to this rectangle. an arrow points down from the bottom of this last rectangle, and the arrow turns to the left then up then right until it meets the left side of the count less than 5 diamond. an arrow points to the right from the right corner of the count less than 5 diamond to a parallelogram in which it reads display open parentheses count close parentheses, and the word false is written next to the arrow pointing to this parallelogram. another arrow points down from the bottom of this parallelogram to an oval in which it reads end. what is displayed as a result of executing the algorithm in the flowchart? responses 5 5 15 15 1 2 3 4 1 2 3 4 1 2 3 4 5
Displayed as a result of executing the algorithm in the flowchart will be the number 5.
The algorithm in the flowchart starts by initializing a variable "count" to 1. It then enters a loop where it checks if "count" is less than 5. If it is, the "count" variable is incremented by 1 and the loop continues. If "count" is not less than 5, the loop exits and the value of "count" is displayed in a parallelogram before the algorithm ends. So the final output will be the number 5.
A flowchart is a diagram that displays the individual steps of a process in the right sequence. It is an all-purpose tool that can be customised for a variety of tasks and used to specify a range of procedures, such as a project plan, an administrative or service process, or a manufacturing process.
Learn more about algorithm here:
https://brainly.com/question/17780739
#SPJ4
add code to make the following features of this photo album app work properly: the scroll buttons don't cause errors. the counter for the number of photos updates correctly. the random photo button displays a random photo from the list photolist
An artistic album-making tool is called Photo Album. Your favorite photos are stored in this cutting-edge digital album.
What is the use of photo album?An artistic album-making tool is called Photo Album. Your favorite photos are stored in this cutting-edge digital album. Create stunning albums with the help of sophisticated selections and creative tools to save those special memories. A personalized greeting is a nice way to wish your pals a happy birthday or anniversary.
You can make a PowerPoint presentation to show off your private or professional photos. Use the search bar labeled "Search for online templates and themes" to find pre-made templates if you want to start your photo album from one. Then, pick the one you like most. Even if they are still a common item for storing printed photos, photo albums are a great method to make your images come to life.
To learn more about Album refer to :
https://brainly.com/question/24035610
#SPJ4
which of the following is the correct way to write a method that changes the name of a shoppingitem object's name variable? (select all correct answer(s))
The code that changes the name of a shoppingitem object's name is
}
public void changeName(String newName)
this.name = newName;
}
public void setName(String newName) {
this.name = newName;
}
What is Void?The void keyword designates that a function doesn't return a value when it is used as a function return type. Void indicates that there are no parameters for the function when it is used for the parameter list. Void designates that a pointer is "universal" when it is used in the declaration of a pointer.
If the type of a pointer is void*, it can point to any variable that isn't declared with the const or volatile keywords. No other type can be cast onto a void* pointer, so it cannot be dereferenced. Any other data pointer type may be created from a void* pointer.
To know more about Void
https://brainly.com/question/13439673
#SPJ4
A relational database query normally returns many rows of data. But anapplication program usually deals with one row at a time. Which of thefollowing is used to bridge this gap allowing the program to deal with onrow at a time?Select one:a. Cursorb. Triggerc. PL/SQLd. Sub select join
A cursor is a special type of loop that allows an application program to retrieve one row at a time from a query result set and process it before retrieving the next row.
What is cursor?A cursor is a small symbol or graphical image on a computer screen that indicates the position at which the next action, such as typing or clicking, will take place. Depending on the operating system and type of user interface, the cursor may appear as a blinking line, a solid block, or an image representing the action that will take place if the user presses a mouse button. It is used to help the user navigate and manipulate text, images, and other objects on the screen. Cursors are used in many software applications, such as document editors, spreadsheets, and image manipulation programs, and they provide important visual cues that help users interact with the computer more efficiently.
It allows the program to process the data one row at a time without having to store the entire result set in memory.
To learn more about cursor
https://brainly.com/question/30260912
#SPJ4
help me please......
1. powepoint
2. Presentations
3. Students
4. software
5. image
6. Multimedia
7. animations
8. colors
9. images
10. transitions
11. notes
12. particular
T/F : cyberbullying is a person within the organization who is trusted to monitor, contribute, filter, and guide the social media presence of a company, individual, product, or brand.
Sending, uploading, or disseminating unfavorable, hurtful, or nasty content about someone else is considered cyberbullying.
What does about cyberbullying provide as an example?Constantly sending a classmate unpleasant messages via instant message is one example of "cyberbullying." uploading embarrassing photos of classmates without their consent, utilizing email to spread rumors about pupils at school.Sending, uploading, or disseminating unfavorable, hurtful, or nasty content about someone else is considered cyberbullying. It can involve disclosing sensitive or private information about another individual in a way that causes embarrassment or humiliation. Some forms of cyberbullying go too far and become illegal or criminal.Sending, uploading, or disseminating unfavorable, hurtful, or nasty content about someone else is considered cyberbullying. It can involve disclosing sensitive or private information about another individual in a way that causes embarrassment or humiliation.To learn more about cyberbullying refer to:
https://brainly.com/question/1460915
#SPJ1
You have an Azure subscription that includes a virtual network named VNet1.
You plan to create a web app named WebApp1 and deploy it to VNet1.
You need to prepare the environment for the planned web app. The solution must minimize costs.
Which app service plan size should you use?
Select only one answer.
Dev / Test F1
Dev / Test B1
Production P1V2
Production P3V3
Isolated I1V2
The app service plan size that should be used is option A: Dev / Test F1.
What is the virtual network about?Azure App Service plans determine the resources and features available to your web apps, such as the number of CPU cores, memory, and automatic scaling. You can choose from several different app service plan sizes, each with different pricing and capabilities.
The Dev / Test F1 app service plan is the least expensive option and it's suitable for development and testing environments.
Therefore, Dev / Test B1, Production P1V2, Production P3V3, and Isolated I1V2 are all more expensive options that are intended for production environments. They offer more resources and higher availability, but they also come at a higher cost. Since the goal is to minimize costs, the least expensive option would be the best choice for this scenario.
Learn more about virtual network from
https://brainly.com/question/30206213
#SPJ1
______ software is an application that enables users to enter typed text, handwritten comments, drawings, sketches, and links anywhere on a page and then save the page as part of a notebook.
Using note-taking software, users can add typed text, handwritten notes, doodles, links, drawings, and other content to any part of a page, and the page is then saved as a section of a notebook.
What is software application short note software?A computer's operating system and various activities are carried out by software, which is a collection of instructions, data, or programmes. In contrast, hardware refers to the components that make up a computer's physical structure. An application, script, or programme that runs on a device is referred to as "software" in general usage. Utilizing a computer to draught, edit, save, and print documents is referred to as word processing.
Word processors are specialised pieces of software that are required to do word processing. Although Microsoft Word is one popular example of a word processor, there are many other options available. Engineering Information systems Theory in Computer Science (MindTap Course List) The term "personal application software" refers to software that helps users to increase their productivity and quality of work while also boosting their personal effectiveness.
To learn more about note refer to :
https://brainly.com/question/28224061
#SPJ4
fill in the blank. the___element, a hypertext markup language (html) metadata element, contains a collection of metadata elements that describe the document or provide instructions to the browser. list head body html
The head element, a hypertext markup language (html) metadata element, contains a collection of metadata elements that describe the document or provide instructions to the browser.
HTML is a markup language that is used to create web pages., a markup language. It specifies how a web page should look and how to present content using elements. It therefore creates or specifies the structure of our web page. Please save your file with the.html extension, as always. In this HTML tutorial, we'll go over all the fundamental ideas you need to know to get started with HTML.
Between the html and body tags, the <head> element serves as a container for metadata (info about data). Data about the HTML document is known as metadata. There is no display of metadata. Metadata is frequently used to define the document title, character set, styles, scripts, and other meta data.
Know more about HTML:
https://brainly.com/question/24065854
#SPJ4
_______ are created within ________, similar to how you create individual files within a broader file folder.
A) Streams, Tabs
B) Tabs, Streams
C) Engagements, Publisher
D) Libraries, Engagement
E) Arrows, Columns
The correct answer is B) Tabs, Streams similar to how you create individual files within a broader file folder.
A tab is a clickable section at the top of a window in computer software (such as an Internet browser) that displays another page or region. Any open tabs are hidden and the contents of the selected tab are shown. You may switch between settings in a software, different documents, or web sites using tabs. Text alignment is done using tabs, a paragraph formatting feature. Word inserts a tab character and shifts the insertion point to the tab setting, also known as the tab stop, when you hit the Tab key. Both custom tabs and Word's default tab settings are options.
To learn more about Tabs click the link below:
brainly.com/question/17643845
#SPJ4
The ________ report describes the current information system, the requirements for a new system, and a possible development schedule.A) Top-Down AnalysisB) Data FlowC) Systems AnalysisD) Components"
Answer: systems analysis
Explanation: The systems analysis stage is documented in a report for higher management. The report describes the current information system, the requirements for a new system, and a possible development schedule. Management studies the report and decides whether to continue with the project.
FILL IN THE BLANK your worksheet contains confidential information in column c; to prevent others who use your worksheet from seeing the data, you can_______column c.
Answer: your worksheet contains confidential information in column c; to prevent others who use your worksheet from seeing the data, you can HIDE column c.
Explanation:
John needs to install a web server that can offer SSL-based encryption. Which of the following ports is required for SSL transactions? For clients to connect to the server via SSL, the server must have inbound port 443 open.
Inbound port 443 must be open on the server for clients to connect to it using SSL.
What do you mean by web server ?A web server is a machine that houses web server software and the files that make up a website (for example, HTML documents, images, CSS stylesheets, and JavaScript files). A web server establishes a connection to the Internet and facilitates the physical data exchange with other web-connected devices. A web server is software and hardware that responds to client requests sent over the World Wide Web using the HTTP (Hypertext Transfer Protocol) and other protocols. A web server's primary responsibility is to show website content by storing, processing, and sending webpages to users.
To know more about web server , visit
https://brainly.com/question/26281028
#SPJ4
david is performing the following construction. an angle is created from points c, a, and b with vertex a. an arc is drawn from point a and intersects rays ac and ab. the intersection of the arc and ray ac creates point d. the intersection of the arc and ray ab creates point e. an arc is drawn from point b. the compass is kept the same width and an additional arc is drawn from point e that intersects the arc drawn from point d. based on the markings that are present, what construction is he performing? a. bisecting an angle b. bisecting a line segment c. copying an angle d. copying a line segment
David is performing the construction of bisecting an angle. When we bisect an angle, we draw an arc from the vertex of the angle and it intersects both rays that form the angle. This is done by using a compass to draw the arc.
In David's case, he is drawing an arc from point A and intersecting rays AC and AB, he is bisecting angle A. He then draws another arc from point B with the same compass width and it should intersect the first arc at its midpoint. This point of intersection is where the angle bisector is constructed. With this construction, David is able to divide the angle into two congruent angles, each measuring half the measure of the original angle. This is a useful technique in geometry and is applied in various fields like engineering and architecture.
Find out more about Construction
brainly.com/question/18403020
#SPJ4
When writing WHERE clauses with columns containing text data, SQL does not support any operators to do things like case-insensitive string comparison and wildcard pattern matching.FalseIf data is managed in multiple unlinked worksheets in excel, then if I change the email of a person in one worksheet:
False, the changes will not be reflected in the other worksheets unless they are linked through some sort of formula or macro.
SQL does support operators for case-insensitive string comparison and wildcard pattern matching when working with text data in WHERE clauses. For example, the SQL function "UPPER()" can be used to convert a string to uppercase for case-insensitive comparison and the operator "LIKE" can be used for wildcard pattern matching.
If data is managed in multiple unlinked worksheets in excel and you change the email of a person in one worksheet, the changes will not be reflected in the other worksheets unless they are linked through some sort of formula or macro.
A WHERE clause in SQL is used to filter the results of a SELECT, UPDATE, or DELETE statement based on a certain condition. The condition specified in the WHERE clause is used to evaluate each row of the table and only the rows that satisfy the condition will be included in the final result set. A WHERE clause is formatted as follows:
SELECT column1, column2, ...
FROM table_name
WHERE condition;
The condition can be any expression that evaluates to a Boolean value (true or false). The condition can include comparison operators (such as =, <>, >, <, >=, <=), logical operators (such as AND, OR, NOT), and any other valid SQL expressions.
Learn more about SQL here:
https://brainly.com/question/20264930
#SPJ4
Your colleague has just completed the following steps to setup your Qualys account for patching: 1. Installed Qualys Cloud Agent on target hosts. 2. Assigned all Agent hosts to a Configuration Profile with PM configuration enabled. 3. Activated the PM application module for all Agent hosts. 4. Assigned all hosts to an enabled Assessment Profile. Although Deployment Jobs have been created and enabled, patches are not getting installed. What step did your colleague miss? Choose an answer: Targeted assets must be configured to consume a patching license Targeted assets must be labeled with the ""Patchable"" Asset Tag Targeted assets must be added to the ""Patch Management"" Asset Group Targeted assets must be added to the Patch Catalog
The step that your colleague miss is option C: Targeted assets must be added to the "Patch Management" Asset Group.
What is Patch Management?The other steps your colleague completed are necessary to set up the Qualys account for patching, but it's not enough to ensure that patches are getting installed
It's also worth to check if the targeted assets have a patching license assigned. Targeted assets must be configured to consume a patching license to have access to patching functionality.
And finally, it's important to ensure that targeted assets are added to the Patch Catalog, so that Qualys can access the necessary patch information and download the patches to be installed on the assets.
Learn more about Patch Management from
https://brainly.com/question/15190878
#SPJ1
