Two point charges are separated by 7.0 cm . The attractive force between them is 18 N . Suppose that the charges attracting each other have equal magnitude.
- Rearrange Coulomb's law and find the magnitude of each charge.

The balloon will bounce a highest when two balls of equal weight are placed from the same location as a result of its greatest elasticity. The rubber ball is squashed or squeezed when it strikes the ground.

Elasticity is the capacity of a material body to regain its original dimensions and shape after being deformed by external forces. This capability is referred to as elastic behavior (or response) in a body. Hoare's rule.

When anything is stretched or squeezed, it can regain its original shape thanks to its elastic properties. A rubber, for instance, can quickly restore its shape after being stretched out significantly.

To know more about elasticity visit :
https://brainly.com/question/29564308

#SPJ4

If a bicycle tire is spinning clockwise at 2.30 rad/s. the change in the tire’s angular velocity and the tire’s average angular acceleration is: 2.63 rad/s².

Change in angular velocity

Δw =  wf -wi

Δw = (2.30 rad/s) - (-2.30 rad/s)

= 4.60 rad/s

w_ is negative because it is in the clockwise direction.

Average angular acceleration:

Average angular acceleration = 4.60 rad/s/ 1.75s

Average angular acceleration = 2.63 rad/s²

Therefore the average angular acceleration is 2.63 rad/s².

Learn more about  average angular acceleration here:https://brainly.com/question/29138741

#SPJ1

The black mamba travels a distance of 2.0828 m, which is less than its length of 4.50 m.

The first equation of motion states:

vf = at + vi

A top speed is _f.

Initial or lowest speed is v i, and acceleration is a.

2.60 = 4.50 t

t +0 = 1.28571sec

The snake needs 1.28571 seconds to attain its peak speed.

Part B:

The second equation of motion states:

S=0.5(4.50) S=vit+at2 w i=0 (1.28571)

2 S = 2.0828m

In that period, the snake moves 2.0828 metres.

Part C:

The black mamba travels a distance of 2.0828 m, which is less than its length of 3.12 m.

2.0828 m<3.12 m

A potential exists for monkeys to capture a black mamba.

To learn more about black mamba refer to:

https://brainly.com/question/14748177

#SPJ1

A substance will switch between its solid, liquid, and gaseous forms when temperature, pressure circumstances encourage corresponding transitions. When a gas's temperature increases, pressure falls.

A state of matter that is gaseous has a distinct mass but no distinguishable shape or volume. Pressure, volume, temperature, material quantity, specific heat, and other quantifiable characteristics of gases include these. The most important characteristics are the four independent variables quantity, volume, pressure, and temperature, which describe the gas's state. When describing how hot or cold something is, the idea of temperature is used. One can measure temperature by using a thermometer. The calibration of thermometers involves the use of various temperature scales.

Learn more about specific heat here

https://brainly.com/question/29766819

#SPJ4

Regarding memory, conscious is to explicit memory as unconscious is to implicit memory.

a) 9.80 N  b) 0.0059 atm c) P = (9.80 N) / (total area of slices) d) P = (9.80 N) / (total area of applesauce)

To learn more abut pressure refer:

brainly.com/question/30148777

#SPJ4

The tire makes approximately 280.57 revolutions during this motion.

Generally, To find the number of revolutions the tire makes during this motion, we first need to find the distance traveled by the car.

Distance = Initial velocity x time + (1/2) x acceleration x time^2

Since the car starts at rest, the initial velocity is 0 m/s.

The acceleration is uniform, so we can use the formula:

Final velocity = Initial velocity + acceleration x time

In this case, the final velocity is 33.8 m/s, and the time is 4.7s.

So, acceleration = (33.8 m/s - 0 m/s) / 4.7s

= 7.19 m/s^2

Now we can use this value of acceleration to find the distance traveled:

Distance = 0 m/s x 4.7s + (1/2) x 7.19 m/s^2 x (4.7s)^2

= 570.98 m

To find the number of revolutions of the tire, we divide the distance traveled by the circumference of the tire.

The circumference of the tire is equal to the diameter x pi.

Circumference = 64.6 cm x 3.14

= 203.5 cm

Number of revolutions = Distance / Circumference

= 570.98m / (203.5 cm)

=280.57

Read more about revolutions

https://brainly.com/question/1291142

#SPJ1

(1) The force exerted by the hammer claws on the nail is 57.3 N.

(2) The force exerted by the surface on the point of contact with the hammer head is 81.83 N.

The force exerted by the hammer claws on the nail is calculated as follows;

Fy = Fn sinθ

where;

Fy = 99.9 N  x  sin (35)

Fy = 57.3 N

The force exerted by the surface on the point of contact with the hammer head is calculated as follows;

Fx = Fn x cosθ

Fx = 99.9 N  x  cos (35)

Fx = 81.83 N

Learn more about parallel force here: https://brainly.com/question/14960101

#SPJ1

The object has a density less than 1000 kg/m³ because it floats in mineral oil which has a density of 1025 kg/m³.

The density of a substance is a measure of its mass per unit volume. In the table provided, the densities of four different liquids are given, along with whether an object floats or sinks in each liquid.

Since the object floats in mineral oil, which has a density of 1025 kg/m³, it means that the density of the object must be less than that of mineral oil, or less than 1025 kg/m³.

This is because objects with a density greater than the liquid they are placed in will sink, while those with a lower density will float. Therefore, the object has a density less than 1000 kg/m³.

Learn more about density:

https://brainly.com/question/29775886

#SPJ4

(a) The x coordinate of the center of the gravity is 1.48 a

(b) The y coordinate of the center of the gravity is 1.33 a.

The direction of the weights of the four square plates is calculated as follows;

θ = arc tan ( dy / dx )

where;

dy = 2a

dx = 2a

θ = arc tan ( dy / dx )

θ = arc tan ( 2a / 2a )

θ = arc tan ( 1 )

θ = 45⁰

The x coordinate of the center of the gravity is calculated as follows;

x = ( m₁x₁ + m₂x₂ ) / ( m₁ + m₂ )

x = ( (90 + 50)a  +  (40 + 90)2a ) / ( 90+50  + 40 + 90 )

x = (140a + 130(2a) ) / ( 140 + 130 )

x = (140a + 260a ) / (270)

x = 1.48 a

The y coordinate of the center of the gravity is calculated as follows;

y = ( m₁y₁ + m₂y₂ ) / ( m₁ + m₂ )

y = ((90 + 90)a + (50 + 40)2a ) / (90+90  +   50+40 )

y = (180a + 90(2a) ) / (180 + 90)

y = (180a + 180a) / (270)

y = (360a) / ( 270)

y = 1.33 a

Learn more about center of gravity here: https://brainly.com/question/874205

#SPJ1

Hardening parameter is assumed to be related to some measure of the plastic strains via the equation [tex]$\sigma_{y0} = K \varepsilon_p^m$[/tex].

Parameter is a special kind of variable used in a function or subroutine to refer to one of the pieces of data provided as input to the function. It is a value that controls the behaviour of a function. It can be used to provide a certain type of flexibility in the function, allowing it to act differently in different situations.

where [tex]$\sigma_{y0}$[/tex] is the hardening parameter, [tex]$K$[/tex] is a material constant, and [tex]$m$[/tex] is the hardening exponent. This equation is used to determine the relationship between the yield stress and the plastic strain, providing a useful tool for predicting the behavior of a material under cyclic loading.

The strain hardening increases the yield strength of the material.

and

Modulus of toughness = [tex]\dfrac{\text{Yieldstress}^2}{2(\text{{Youngs Modulus)}}}[/tex]

Hence, if the yield stress increases, the modulus of toughness increases too.

To know more about yield stress click-

https://brainly.com/question/16901053

#SPJ4

When anything, a process, or an event may ignite or transport energy into a medium to cause combustion, it is said to be a source of ignition. This standard permits the use of open flames as a source of ignition.

Friction, hot surfaces, sparks, and static electricity. bursts of lava and friction-based electricity warmers. Sun Everyone who lives on Earth gets most of their heat from the sun. For plants to prepare their food, they require energy from the sun. The warmth of the sun makes it possible for humans to survive. Fuel ignition results in the release of energy. Heat is the energy that is transmitted when two objects with different surface temperatures touch. system of the sun.

learn more about ignition here

https://brainly.com/question/1399289

#SPJ4

The truck and the tiny car both experience the same amount of momentum difference.

What is the definition of momentum in physics?

whenever a person is struck in the face by a ball that was thrown at him. It demonstrates how challenging it might be to change the course of events. A baseball is swooping in the air. A large truck is moving. This kind of firearm discharged a bullet.

In what situations does momentum actually matter?

Momentum is a property of almost all motion-related activities. It is a cornerstone of physics. In sports, the word "momentum" is frequently used. A side that has momentum is therefore moving and will require effort to stop.

To know more about Momentum visit:

brainly.com/question/1042017

#SPJ4

For full question refer the image.

The magnitude of the acceleration of the car when its velocity changes from 45km/h to 65km/h in 3 s is 1.9 m/s^2

Let u be the initial velocity of the car.

u=45 km/h (given)

By converting it into m/s , we get:

u=12.5 m/s

Let v be the final velocity of the car, then :

v=65 km/h

v=18.1 m/s ( By converting them into m/s)

Now, let the acceleration of the car while moving to be a, then :

Using the formula, we get:

⇒v = u + at

⇒ 18.1 = 12.5 + a×3 ( Putting all the values)

⇒3a = 18.1 - 12.5

⇒a = 5.6/3

⇒ a = 1.9 m/s^2

Therefore, The magnitude of the acceleration of the car when its velocity changes from 45km/h to 65km/h in 3 s is 1.9 m/s^2

Learn more about acceleration here:

https://brainly.com/question/460763

Net electric field produced by the four particles at the square's center is zero.

The physical field that surrounds electrically charged particles and exerts force on all other charged particles in the field, either attracting or repelling them is called an electric field.

Electric field produced by each particle at the center of the square can be calculated as:

E1 = k * q1 / (5/sqrt(2))^2 = 810^9 N/C * (1010^-9 C) / (5/sqrt(2))^2 = 410^9 N/C

E2 = k * q2 / (5/sqrt(2))^2 = 810^9 N/C * (-2010^-9 C) / (5/sqrt(2))^2 = -810^9 N/C

E3 = k * q3 / (5/sqrt(2))^2 = 810^9 N/C * (2010^-9 C) / (5/sqrt(2))^2 = 810^9 N/C

E4 = k * q4 / (5/sqrt(2))^2 = 810^9 N/C * (-1010^-9 C) / (5/sqrt(2))^2 = -410^9 N/C

So, E net = E1 + E2 + E3 + E4 = 410^9 N/C + (-810^9 N/C) + 810^9 N/C + (-410^9 N/C) = 0 N/C

Therefore,  net electric field produced by the four particles at the square's center is zero.

To know more about electric field, refer

https://brainly.com/question/14372859

#SPJ4

Since x(t) is a linear function of v(nt) which is jointly Gaussian, and the mean of x(t) is a linear function of t, x(t) is also a Gaussian process.

To learn more about Gaussian process refer:

brainly.com/question/13427232

#SPJ4

Let the distance of weight W from the bearing is x3,

Then as we can see weight W is trying to give a clockwise rotation around the bearing similarly the charge +q is also applying the same clockwise torque because of the repulsion from the charged sphere beneath it.

But +2q charge torque is in a counter-clockwise direction. thus to make the rod balanced torque from weight W and +q charge must be balanced by the torque by +2q charge.

Let F and F1 be the force on +q and +2q respectively because of the fixed +Q charge.

as, F= kq[tex]\frac{Q}{h^2}[/tex]   and F1= 2kq[tex]\frac{Q}{h^2}[/tex] =2F

as for the balance of the rod

FL/2+ Wx3 = 2FL/2

Wx3= FL/2

x3 = kqQ[tex]\frac{L}{2Wh^2}[/tex]

x= [tex]\frac{L}{3} +x3[/tex]

x= [tex]\frac{L}{2} * (kq\frac{Q}{Wh^2} +1)[/tex]

so put the weight above x to balance the rod.

Maximum such notions of distance, both physical and metaphorical, are formalized in arithmetic the use of the perception of a metric place.inside the social sciences, distance can test with a qualitative size of separation, along with social distance or psychological distance.

Distance is a numerical or every so often qualitative dimension of how a long way aside gadgets or points are. In physics or regular utilization, the space may seek advice from a physical period or an estimation primarily based on different criteria (e.g. " counties over"). due to the fact spatial cognition is a wealthy source of conceptual metaphors in human thought, the time period is also often used metaphorically to mean a measurement of the quantity of distinction between similar objects (which includes statistical distance between possibility distributions or edit distance among strings of text) or a degree of separation (as exemplified by using the gap between human beings in a social community).

To learn more about Distance visit here:

brainly.com/question/15172156

#SPJ4

It decreases happens to the energy level of particles when melting occurs. So, option (a) is correct.

What is energy level?

The fixed distances between the atom's nucleus and the location of electrons are known as energy levels, sometimes known as electron shells. A tiny, positively charged nucleus at the center of an atom is surrounded by electrons, which are tiny, negatively charged particles. A staircase's steps can be compared to energy levels.

What is melting?

Melting is the transformation of a solid into a liquid under the influence of heat. When a solid is impure, it often melts over a wide range of temperatures below the melting point of the main component. In a pure crystalline solid, this process takes place at a specific temperature known as the melting point.

Therefore, decreases happens to the energy level of particles when melting occurs. So, option (a) is correct.

Learn more about energy level from the given link.

https://brainly.com/question/14287666

#SPJ1

The mass of a bullet moving at 45m/s and has kinetic energy of 51 j is 0.050 gram.

The term kinetic energy is defined as  the energy of motion, observable as the movement of an object or subatomic particle.

There are five different types of kinetic energy: radiant, thermal, sound, electrical, and mechanical.

It is represented by formula

K.E = 1/2 mv²

Kinetic energy = 51 j

Mass = ?

Velocity = 45m/s

Then,

Mass = 2 K.E / v²

= 2 × 51 / 45²

= 102 / 2025

= 0.050 gram

Thus, The mass of a bullet moving at 45m/s and has kinetic energy of 51 j is 0.050 gram.

To learn more about the kinetic energy, follow the link;

https://brainly.com/question/26472013

#SPJ1

When the block's radius and tangential speed are known, the centripetal acceleration of the block may be determined because ac=v2rac=v2r.

What exactly is a force in science?

Physics appears to have a clear definition for the word "force." A force of this magnitude can be described as either a push or a pull. A force does not "be in it" or "be inside it." A force from another object can affect something else.

What do the terms force and motion mean?

Basically, a push or pull that impacts anything or energy as a property of physical motion or movement is referred to as force. It happens when two things come together. A body is also considered to be in motion when it is moving.

To know more about acceleration visit:

brainly.com/question/13191643

#SPJ4

The figure below displays various horizontal spaceship travel speed, with y being the farthest away from zero. Y is the solution

A spacecraft has never traveled faster than 163 km/s (586,800 km/h; 364,660 mph), which was accomplished by the Parker Solar Probe on November 20, 2021, at 21:25:24 UTC. The probe received a gravity boost from a fly-by of Venus on October 16 that tightened its orbit, allowing it to achieve this speed at perihelion (the closest point in its elliptical orbit around the Sun). It came within 5,307,594 miles (8,541,744 km) of the surface of the Sun. Until the Parker Solar Probe's 17th perihelion on September 27, 2023, this record will hold.

For instance, a spacecraft leaving the surface of the Earth has to be traveling at a speed of about 40,000 kilometers per hour (25,000 miles per hour), or approximately 11 kilometers per second (7 miles per second), in order to enter orbit.

The correct question is:

The chart shows different speeds at which theoretical spacecraft are traveling horizontally. The speeds are represented as percentages of the speed of light the spacecraft are traveling, where 0.20c = 6 × 107 m/s.

Which spacecraft appears the longest to an outside observer?

Learn more about Speed here:

https://brainly.com/question/28224010

#SPJ4

Friction force works in the opposite direction of the applied force. So, the correct option is (C).

Friction is defined as the force opposing the relative motion of solid surfaces, fluid layers, and material elements sliding against each other. There are many types of friction such as dry friction which is a force that opposes the relative lateral motion of two solid surfaces in contact.

The force of friction is described as the resistance to motion that arises when two objects rub against each other, so this force always acts in the opposite direction to the motion of an object.

Thus, Friction force works in the opposite direction of the applied force. So, the correct option is (C).

Learn more about Friction force, here:

https://brainly.com/question/30280752

#SPJ1

The negatively charged rod attracts positive charges and repels negative charges when it is located closer to the electroscope.

The pith balls' charges polarize when ever an electrified rod is introduced in close proximity to them. They may pick up this very same sign charge if they come into contact the with charged rod. The pith balls act like siblings and avoid touching one another because like charges repel one another.

We can infer from all of these statistics that charge induction, underlying atomic and molecular structure of something like the metal components, and the idea that an electroscope operates.

To know more about electrified visit :

https://brainly.com/question/14471372

#SPJ4

The acceleration of the train is 5 [tex]m/[/tex] [tex]s^{2}[/tex] .

We can clearly see that the ball will follow a parabolic path so we break it into vertical and horizontal axis

The boy throws the ball and gives it a vertical velocity on which constant acceleration 'g' acts

For the vertical movement

[tex]S = ut - \frac{1}{2} g t^{2}[/tex]

[tex]0 = 10 sin 60[/tex]°   -    [tex]\frac{1}{2} 10 t^{2}[/tex]

[tex]t = \sqrt{3} s[/tex]

We know that the ball already has a horizontal velocity equal to the moving train's velocity.

For the vertical movement

[tex]S = ut + \frac{1}{2} a t^{2}[/tex]

[tex]1.15 = 10 cos 60[/tex]°  [tex]\sqrt{3} \ \frac{1}{2} \ a \ 3[/tex]

[tex]a = 5 m/ s^{2}[/tex]

To learn more about acceleration

brainly.com/question/28743430

#SPJ4

The level of magnification that produces the best images using an electron microscope is 250,000 times.

In order to "image" the specimen and learn more about its structure and composition, electron microscopes (EMs) work similarly to their optical equivalents but employ a focussed beam of electrons rather than photons. There are several kinds of electron microscopes, such as the scanning electron microscope (SEM), the transmission electron microscope (TEM), and the reflection electron microscope (REM.)

Universities, research facilities, and institutes for nanotechnology frequently employ electronic microscopes. These facilities allow for a close examination of the specimen's structure, which can reveal details about its intended use.

correct option: C

To know more about electron microscope refer to:

https://brainly.com/question/2845212

#SPJ4

The scalar product of the vectors A = 3i + 4j - 5k and B = -I + j - 2k is -9.

The scalar product (also known as the dot product) of two vectors is a scalar quantity that can be calculated by multiplying the magnitudes of the two vectors and the cosine of the angle between them. The formula to calculate the scalar product of two vectors A and B is:

A.B = |A| |B| cos(theta)

To find the scalar product of two vectors we can also use the following formula:

A.B = (A.i) (B.i) + (A.j) (B.j) + (A.k) (B.k)

where A.i, A.j, A.k, B.i, B.j, B.k are the projections of vectors A and B on the i, j, and k axis respectively.

So, in this case, we have:

following A = 3i + 4j - 5k and B = -i + j - 2k

A.B = (3)(-1) + (4)(1) + (-5)(-2) = -3 + 4 - 10 = -9

Therefore, the scalar product of the vectors A = 3i + 4j - 5k and B = -I + j - 2k is -9.

To learn more about Scalar products visit the link:

https://brainly.com/question/28007613

Refer to the image attached.

In a cartesian coordinate system with three axes along three edges of room, fly changes its position from point (4.00 m, 1.50 m, 2.50 m) to (1.57 m, 2.7 m, 0.55 m), then Displacement vector = -2.43 i + 1.2 j - 1.95 m

A geometric object which encodes both displacement and direction is called displacement vector. Displacement vector from one point to another is an arrow with its tail at first point and its tip at second.

Given (4.00 m, 1.50 m, 2.50 m) to (1.57 m, 2.7 m, 0.55 m).

Displacement vector along x axes is 1.57 - 4.00= -2.43 m

Displacement vector along y axes is 2.7 - 1.50 = 1.2 m

Displacement vector along z axis is 0.55- 2.50 = - 1.95 m

Displacement vector is -2.43 i + 1.2 j - 1.95 m.

To know more about displacement vector, refer

https://brainly.com/question/12006588

#SPJ4

Note: The given question on the portal is not incomplete. Here is the complete question.

Question: a fly enters through an open window and zooms around the room. in a cartesian coordinate system with three axes along three edges of the room, the fly changes its position from point (4.00 m, 1.50 m, 2.50 m) to (1.57 m, 2.7 m, 0.55 m). Find the scalar components of the flies displacement vector (in m).

The magnitude of the work done on the electron by the electric field is given by W = qV, hence  the speed of the electron at x = 20m is v = 42 m/s.

The electric potential energy at x = 0 is V(0) = 15V and the electric potential energy at x = 20 m is V(20) = 715V. Therefore, the magnitude of the work done on the electron is [tex]W = q(715-15) = q700 V.[/tex]

The speed of the electron at x = 20 m can be calculated using the equation[tex]v = √2(V(20) - V(0))/m[/tex], where m is the mass of the electron. Substituting in the values, we get[tex]v = √2(715-15)/m = √1400/m[/tex]. Therefore, the speed of the electron at [tex]x = 20 m is v = √1400/m.[/tex]

The work done on the electron by the electric field during the process is equal to the change in electric potential energy. The electric potential energy at the starting point is equal to V(0) = -15V and the electric potential energy at x = 20 m is equal to V(20) = 215V. The magnitude of the work done can then be calculated as

[tex]W = 215V - (-15V) = 230V[/tex]

The speed of the electron at x = 20 m can be calculated using the equation of motion:

[tex]v^2 = 2a(x-x_0)[/tex]

where a is the acceleration. This can be calculated from the equation of electric potential as:

[tex]a = dV/dx = 2αx + β[/tex]

Plugging in the values for x and the constants, we get a = 44V/m. Substituting this in the equation of motion, we get

[tex]v^2 = 2(44V/m)(20m-0m) = 1760V[/tex]

Therefore, the speed of the electron at[tex]x = 20m is v = 42 m/s.[/tex]

To learn more about electric potential energy refer to:

brainly.com/question/12645463

#SPJ4