use least squares regression to fit a 0th degree polynomial to the following data: where . what is the 0th degree polynomial solution?

The distance traveled by car is exactly equal to the 11 km, so option B is correct, and the displacement traveled by car is less than 11 km, so option A is correct.

It is defined as the difference in position of an object from its initial position to its final position. The displacement vector points from the initial position to the final position, and its magnitude is equal to the distance between the two positions.

For example, if an object is moving in a straight line, its displacement can be described as the change in its position along that line. The unit of displacement is typically meters (m) or kilometers (km).

In addition, displacement is a scalar quantity in that it has only magnitude, it does not have a direction.

Given information:

The odometer's initial readout is [tex]d_i[/tex] = 27123 kilometres

The odometer's final readout is: [tex]d_f[/tex] = 27134 kilometers

Step (1)

An odometer is a device that is mounted to the dashboard of an automobile to track the miles driven.

The longest path the car has taken is the distance.

The following statement describes how far the car traveled on the winding road:

D = [tex]d_f -d_i[/tex]

Change the value in the equation above.

D= 27134km-27123km

D= 11km

As a result, the distance driven by car is exactly 11 kilometers.

Thus, choice (B) is the right one.

Step (2)

The distance between the final point and the starting point is measured as displacement. Displacement is never greater than the distance or equal to it. The displacement's expression is given as

SD

S(df-di)

Change the value in the equation above.

S<( 27134km-27123km)

S<11km

The displacement driven by car is therefore less than 11 kilometers.

Thus, choice (A) is the right one.

Learn more about displacement

brainly.com/question/10919017

#SPJ4

The complete question is:

When you drive to work on a winding road, the odometer of your car changes from 27123 km to 27134 km.

1) The distance your car traveled is ________.

 A. less than 11 km   B. exactly 11 km 

 C. greater than 11 km  

2) The magnitude of your car's displacement is ________.

 A. less than 11 km   B. exactly 11 km 

 C. greater than 11 km  

Hormones produced by the placenta manipulate the in-utero environment in ways that benefit the fetus at a cost to the mother is true.

What does physics theory mean?

A well-supported theory considers facts, rules, and hypotheses to explain a natural phenomenon. The gravitational field hypothesis, for example, explains both apples falling from bushes and astronauts floating in space.

Is an opinion a fact?

You can never demonstrate a theory. It provides an analysis of several different facts. Until it is disproven, a well-supported, fact-based hypothesis is accepted. It will never come to pass, and that is a fact.

To know more about offspring visit:

https://brainly.com/question/471576

#SPJ4

Which of the following statements regarding Haig’s theory of in-utero parent-offspring conflict is true?

a. Maternal genes should be selected to transfer as many nutrients to the fetus as requires

.b. Fetal-derived cells cannot invade the maternal endometrium during implantation.

c. Hormones produced by the placenta manipulate the in-utero environment in ways that benefit the fetus at a cost to the mother.

d. Selection will not favor maternal genes that code for resisting the invasion of the endometrium y fetal-derived tissues.

e. Fetal genes should he selected to respect the maternal optimum for nutrient transfer topreserve the mother’s future reproductive success.

The maximum velocity of the sphere when it will reach the ground will be [tex]\sqrt{\dfrac{10gh}{7} }[/tex]. Thus, option A is correct.

A minimum velocity is present at a position where acceleration is both negative to the left and positive to the right. A maximum velocity is at a location where acceleration is positive to the left and negative to the right.

The displacement diminishes as the mass comes closer to the equilibrium position, which also results in a decrease in the restoring force and acceleration. There is no restoring force when the mass reaches the equilibrium position. Since there is no acceleration, the mass is travelling at its fastest possible rate.

For the maximum velocity of the sphere when it reaches the ground, the loss in gravitational potential energy is equal to the gain in translational kinetic energy and rotational kinetic energy,

[tex]$ \Rightarrow \text{ mgh} = \frac{1}{2} mv^2 + \frac{1}{2} I \omega^2[/tex]

[tex]$ \Rightarrow \text{ mgh} = \frac{1}{2} mv^2 + \frac{1}{2} \left(\frac{2}{5}mR^2\right) \omega^2[/tex]

[tex]$ \Rightarrow \text{ mgh} = \frac{1}{2} mv^2 + \frac{1}{2} \times \frac{2}{5}m \times R \times R \times \omega \times \omega[/tex]

From the no-slip condition:

v = Rω

So, [tex]\mathrm{ R \times R \times \omega \times \omega = v \times v = v^2 }[/tex]

[tex]$ \Rightarrow \text{ mgh} = \frac{1}{2} mv^2 + \frac{2}{10} mv^2[/tex]

[tex]$\mathrm{ \Rightarrow \text{ mgh} = \frac{5}{10} mv^2 + \frac{2}{10} mv^2}[/tex]

[tex]$\mathrm{ \Rightarrow \text{ mgh} = mv^2\left(\frac{5 + 2 }{10} \right)}[/tex]

[tex]$\mathrm{ \Rightarrow \text{ mgh} = mv^2\left(\frac{7 }{10} \right)}[/tex]

[tex]$\mathrm{ \Rightarrow \frac{ mgh}{mv^2} = \left(\frac{7 }{10} \right)}[/tex]

[tex]$\mathrm{ \Rightarrow 7{v^2} ={10} gh }[/tex]

[tex]$\mathrm{ \Rightarrow {v^2} = \frac {10 gh} {7}}}[/tex]

[tex]$ \Rightarrow \text v = \sqrt{\frac{10gh}{7} }[/tex]

Thus, the maximum velocity of the sphere when it will reach the ground will be [tex]\sqrt{\dfrac{10gh}{7} }[/tex]. Thus, option A is correct.

Learn more about minimum velocity

brainly.com/question/13104567

#SPJ4

The circle's center is where the acceleration is pointed radially.

To learn more about acceleration refer to:

https://brainly.com/question/30257873

#SPJ4

A digital component defines an output voltage between 0 and 0.8V as a logic-0 and an output voltage between 2V and 5V as logic. These voltages are its  Logic Level.

For a signal to exist or to be considered a signal it should be at a certain logic level. Mostly used states are ON or OFF. An 'on' refers to a binary 1, and an 'off' refers to a binary 0 when expressed in binary. These signals are referred to as "high" or "low", respectively

Binary logic is used by digital devices to store, analyse, and transmit data and information. In binary logic, a condition is either "on" or "off".

The manufacturers mentions the logic level voltage of each device in the manual provided with it.

To learn more about Voltage

brainly.com/question/2364325

#SPJ4

A person exerts a horizontal force on a banana at rest on a counter top. The banana remains at rest is zero.

When two surfaces come into contact with one another, frictional force acts to move them either in the same direction or in the opposite way. Since friction is a force that opposes or resists an object's ability to glide against another when they come into contact. As a result, the force of friction is a contact force. A force called friction always works against motion. The texture of the surfaces of the items that made contact with each other and the amount of force applied to them both have a significant impact on the frictional forces. Rolling, sliding, static, and kinetic friction are the four main categories under which frictional forces are categorised. Fluid friction is yet another significant type of friction.

Frictional forces exist between the banana and the countertop. These forces resist the motion of the banana, and it remains at rest because the force applied to it is not enough to overcome the force of friction. In this scenario, the frictional force does zero work on the banana because the banana does not move, and work is defined as force applied over a distance.

The force exerted by the person is equal and opposite to the force of friction, so the net force on the banana is zero, and no work is done on the banana.

To know more about force visit:

https://brainly.com/question/28875770

#SPJ4

Transducer element converts a sensor's minute actions into a usable indication or signal.

A transducer which is known as thermocouple, is able to sense changes in temperature and it produce the output voltages representative of those changes. A lot of the sensors which is used in HVACR are also transducers since they generate the electrical signal while monitoring another signal as input.

The circuit which is to be measured and the ammeters must be linked in series and it measures the current. The entire circuit where current can pass through an ammeter at relatively low currents (up to a few amperes).

Power readings are taken with a power meter. The potential difference between two locations in a circuit is measured using a voltmeter.

Learn more about transducers:

brainly.com/question/13103015

#SPJ4

Answer:

A Salt deposits that were formed thousands of years ago by the evaporation of ocean water have the same composition as salt deposits formed today would provide the most support for the proposition that the composition of ocean water has remained constant for thousands of years. This statement directly supports the idea that the composition of ocean water has not changed over time, as the salt deposits that were formed in the past have the same composition as those formed today. The other statements provide supporting evidence but not as strong as statement A.

The answers include the following:

A. This method observes subjects with little interference in their "natural habitat" - Naturalistic observation.

B. This method is an intensive study of a person or a group - Case study.

C.  This method uses questionnaires and interviews to collect information about people's attitudes, beliefs, feelings, behaviors, and lifestyles - Survey.

Thus us referred to as the active acquisition of information from a primary source and involves the use of our senses.

Naturalistic observation is a type which involves observing subjects with little or no interference in their "natural habitat" which was why it was chosen as the correct choice,

Read more about Observation here https://brainly.com/question/13303856

#SPJ1

3.8×1012kWh represents the total electricity production in the United States from all energy sources, in billions of kilowatt-hours, in 2017.

What is meant by electricity?

To learn more about electricity refer to

https://brainly.com/question/776932

#SPJ4

a)The gravitational potential energy has changed by 1536.92 joules.

b) The skateboarder's vertical height fluctuated by 2.919 meters.

Energy to a skateboarder (a) - 1620.8J

The skateboarder's initial kinetic energy is given by K i = 1/2 * mu 2 = 1/2 * (56.5kg) * (2.44m/s) 2 = 165.5J, whereas his final kinetic energy is given by K f = 1/2 * m * v 2 = 1/2 * (56.5kg) * (7.24m/s) 2 = 1457.2J, where v is his final speed.

The kinetic energy shift is therefore Delta*K = K f - K i = 1457.2J - 166.5.J = 1290.6J.

The change in the skateboarder's mechanical energy (kinetic plus potential) is equal to the work done on

it: W = 80.0J is the effort the skateboarder did on himself, therefore Delta*K + Delta*E p = W + W f

The amount of work done by friction is W f = 265J.

The shift in gravitational potential energy is represented by the formula Delta*E p =E pf -E pi.

Delta*K = 80.0J - 265J - 1457.2J = - 1620.8J, where Delta*E p = W + W f - Delta*K.

(b) 2.97 m

The skateboarder's shift in potential energy may be expressed mathematically as Delta*E p = mg*Delta*h.

where g = 9.8m / (s 2) is the acceleration of gravity and m = 56.5 kg is the mass.

The skateboarder's change in vertical height is measured by delta*h.

Delta*h is calculated as (Delta*E p)/(mg) = (- 1620.8J)/((56.5kg)(9.8m / (s 2))) = - 2.99m.

Where the skateboarder has descended as indicated by the negative symbol. Because we are only concerned with the absolute value, the solution is h = 2.99m.

To learn more about gravitational potential energy refer to:

https://brainly.com/question/12902132

#SPJ4

Both of us would be attracted towards each other due to the force of gravity with a specific magnitude of 2.4 x 10^-13 N-that number is calculated using the formula for gravitational force and inputting 1KM for r^2.

To learn more about gravitational force refer to:

https://brainly.com/question/27943482

#SPJ1

An exercise that makes your body use a large amount of oxygen over a long period of time is an aerobic exercise.

The word "aerobic" literally means "with oxygen," meaning that the amount of oxygen that can reach the muscles to support their ability to burn fuel and move depends on how much air is breathed in. The cardiovascular system is strengthened by aerobic exercise.  A great way to lose weight is through aerobic activity. Along with helping you lose weight, these exercises also improve your muscles' stamina.

Furthermore, aerobic exercise is the most effective strategy to shed extra fat since it increases the amount of oxygen that your body receives. A warm-up and cool-down should be done before and after every aerobic activity session. Individual exercise tolerance should be the foundation for advancing to higher intensities of exercise. The intensity should also be increased very gradually.

To learn more about aerobic exercise, visit:

https://brainly.com/question/28513883

#SPJ1

It has been said that ethics is characterized by consistency, or the absence of contradictions.

We wouldn't know what to do if someone stated, "Open the window yet don't open the window," as the instruction is contradictory and hence illogical.

Similar to this, if our ethical beliefs and actions are inconsistent, logical individuals like ourselves will be perplexed about what to do and split about how to live.

Consistency in ethics refers to the idea that our moral principles, deeds, and ideals shouldn't be at odds with one another.

Therefore, It has been said that ethics is characterized by consistency, or the absence of contradictions.

To learn more about Ethics, refer to the link:

https://brainly.com/question/11992384

#SPJ1

Total stopping distance is more complicated than how quickly your car stops after you press the brakes.You have a minimum 268 foot total stopping distance at 50 mph.

To learn more about stopping distance refer

https://brainly.com/question/24020960

#SPJ4

Velocity is a vector quantity that describes an object's change in position over time. The general definition of velocity is the derivative of the position vector ~r with respect to time, denoted as v = dr/dt. This means that velocity is the rate of change of position with respect to time. It is also a measure of how fast an object is moving in a particular direction.

Acceleration is another vector quantity that describes an object's change in velocity over time. The general definition of acceleration is the derivative of the velocity vector ~v with respect to time,

denoted as a = dv/dt. This means that acceleration is the rate of change of velocity with respect to time. It is also a measure of how quickly an object's velocity is changing.

In summary, velocity is a measure of how fast an object is moving in a particular direction, while the acceleration is a measure of how quickly an object's velocity is changing. Both are vector quantities and can be described in terms of position vector ~r.

Read more about Kinematics:

https://brainly.com/question/26407594

#SPJ4

An electron is placed between two charged parallel plates asshown. The statements III and IV are True.

What are electrostatic forces?

To sum up, statement I and II are false and statement III and IV are true.

To learn more about electrostatic force refer:

brainly.com/question/20797960

#SPJ4

This law can be expressed as follows: force (F) equals mass (m) times acceleration (a); F = m * a.

It is a frame of reference problem that requires us to exert a pseudo-force on the item.

If an object is accelerating, such as a car, the pendulum's motion must be measured in relation to the accelerating car.

On the pendulum, a pseudoforce equal to ma will be applied in the direction that the automobile is accelerating against.

Here, the pendulum's mass is m, and the car's acceleration is a.If T is the string's tension and it forms an angle of with the vertical,

T sin = mg

Ma = tsin

tanθ = a/g

θ = tan⁻¹ (a/g)

To learn more about acceleration refer

https://brainly.com/question/16269581

#SPJ4

The SI unit for length is the meter, The correct abbreviation for kelvins is K.

To learn more about SI unit refer to:

https://brainly.com/question/24119811

#SPJ4

Without accelerating, it is feasible to ascertain a car's speed before the brakes are used. The magnitude of the shift in location depends on an object's speed in kinematics and daily use.

Given that it calculates how much its position has changed in respect to time, it is a scalar quantity. The average speed of an object during a time interval is calculated as the distance travelled in that time interval divided by the interval's duration. The maximum size and direction of an object are referred to as magnitude in physics. Magnitude is a factor that is shared by both vector and scalar values. We are aware that scalar quantities are those that only have a single property—magnitude.

Learn more about speed here

https://brainly.com/question/28224010

#SPJ4

The NEE directional component is quite consistent throughout the year, with the exception of the summer months.

The wind direction from NEE is more frequent in the winter and spring, when cold air masses dominate the region.

The other predominant direction from which the wind blows is the Southwest (SW). The percentage of time that the wind blows from the SW is approximately 31%. The SW directional component is quite consistent throughout the year, and tends to be more frequent in the summer and fall months. This direction of wind is usually associated with warm air masses, which can bring rainfall and storms.

The remaining wind directions, from the North (N), South (S), East (E), and West (W), make up the remaining 32-33% of the time. These directions are usually associated with different weather patterns and are more variable throughout the year. For example, during the summer months, the N and S directional components will be higher than the E and W directional components.

The variability in wind direction throughout the year is caused by a combination of large-scale weather patterns and local terrain. The large-scale weather patterns that affect wind direction are the prevailing winds and global circulation patterns. Local terrain also plays a role, as some areas may have more of a particular direction of wind due to their location.

Overall, the NEE and SW directions are the most predominant wind directions in the region. Although the other four directions make up the remaining portion of the wind patterns, they are usually associated with different weather patterns and are more variable throughout the year.

To know more about weather patterns click-

https://brainly.com/question/28789144

#SPJ4

The fox spends 0.91 seconds in the air after leaving the snow at a speed of 3.84 m/s.

h = 91 cm = 0.91 m is provided.

Locate: vi, t

We may apply the formulae v = vi - 9.81 t and y = vi t - 4.905 t2.

There is a further fact that we are aware of. The fox has zero velocity at height h, the highest point of the jump:

0.91 = vi tp - 4.905 tp2 where 0 = vi - 9.81 tp

There are now two equations and two unknowns remaining. The starting velocity, vi, may be solved for.

vi = 9.81 tp - 4.905 tp2 - 9.81 tp2 - 4.905 tp2 tp = 0.391 seconds

vi=9.81 tp=3.84 m/s.

That is one response. Applying the second equation once more:

t = 3.84 t - 4.905 t2 0 = t = y = vi t - 4.905 t2 0 (3.84 - 4.905 t)

t = 0, 0.91 s

The fox spends 0.91 seconds in the air after leaving the snow at a speed of 3.84 m/s.

To learn more about speed refer to:

https://brainly.com/question/5176575

#SPJ1

The resultant internal loadings acting on the cross section of the boom at point E is -2.54kN·m, force equilibrium equations.

The notion of equilibrium or balance is a very fundamental concept when dealing with forces. An object can typically be affected by multiple forces at once. A force is a vector quantity, meaning it has both a magnitude (size) and a direction.

There is no net force acting on an object and it is said to be in equilibrium if the size and direction of the forces acting on it are exactly balanced. The first law of motion states that an object at rest will remain at rest and an object in motion will remain in motion because there is no net force acting on an object in equilibrium.

We will consider segment AE of the boom, so we must first determine the pin reactions at A. Notice that member CD is a two-force member. The free-body diagram of the boom is shown in Fig. 1–5 b . Applying the equations of equilibrium,

[tex]$$\begin{gathered}\circlearrowleft+\Sigma M_A=0 ; \quad F_{C D}\left(\frac{3}{5}\right)(2 \mathrm{~m})-[500(9.81) \mathrm{N}](3 \mathrm{~m})=0 \\F_{C D}=12262.5 \mathrm{~N} \\+\Sigma F_x=0 ; \quad A_x-(12262.5 \mathrm{~N})\left(\frac{4}{5}\right)=0 \\A_x=9810 \mathrm{~N} \\+\uparrow \Sigma F_y=0 ; \quad-A_y+(12262.5 \mathrm{~N})\left(\frac{3}{5}\right)-500(9.81) \mathrm{N}=0 \\A_y=2452.5 \mathrm{~N}\end{gathered}[/tex]

The free-body diagram of segment A E is shown in Fig. 1-5 c.

Equations of Equilibrium

[tex]$$\begin{array}{ll}\rightarrow \Sigma F_x=0 ; & N_E+9810 \mathrm{~N}=0 \\& N_E=-9810 \mathrm{~N}=-9.81 \mathrm{kN} \\+\uparrow \Sigma F_y=0 ; & -V_E-2452.5 \mathrm{~N}=0 \\& V_E=-2452.5 \mathrm{~N}=-2.45 \mathrm{kN}\end{array}$$$$\begin{aligned}\circlearrowleft+\Sigma M_E=0 ; & M_E+(2452.5 \mathrm{~N})(1 \mathrm{~m})=0 \\& M_E=-2452.5 \mathrm{~N} \cdot \mathrm{m}=-2.45 \mathrm{kN} \cdot \mathrm{m}\end{aligned}$$[/tex]

Thus, The resultant internal loadings acting on the cross section of the boom at point E is -2.54kN·m.

To know more about equilibrium click-

brainly.com/question/517289

#SPJ4

Full question:

The 500-kg engine is suspended from the crane boom in Fig. 1–5 a . Determine the resultant internal loadings acting on the cross section of the boom at point E .

A procedure the students could use to determine the charge-to-mass ratio of the particles includes the following steps:

1.Obtain a sample of the particles of interest.

2.Set up a parallel plate electrostatic apparatus with a known voltage difference across the plates.

3.Measure the distance between the plates and the electric field strength between the plates.

4.Introduce the sample of particles between the plates, and use a detector to measure the current that flows between the plates.

5.Vary the voltage difference across the plates and record the corresponding current for each voltage.

6.Plot a graph of current versus voltage. The slope of this graph represents the charge-to-mass ratio of the particles.

7.To reduce experimental uncertainty, the students should use a high-precision voltmeter to measure the voltage and a high-precision ammeter to measure the current. They should also take multiple measurements at each voltage and take the average. They should also use a large number of particles to get a more accurate result.

8.Also, the students should ensure that the electrodes are clean, and the electric field is uniform across the gap, as any non-uniformity would affect the results.

9.They should also try to minimize the environmental effects such as temperature and humidity, which could affect the results.

10.Finally, repeat the experiment multiple times and take the average of the results to get the most accurate value of charge-to-mass ratio of the particles.

Learn more about charge-to-mass ratio at : https://brainly.com/question/11927241

#SPJ4

To achieve the same final speed with a force half as big, the force would need to push for 2 seconds.

The importance of forces and motion cannot be overstated. Movement and inertia are caused by lives, forces, and motion. Motion is merely movement; it requires an external force to be applied. Forces that can speed up or slow down motion include pushing and pulling.

We know that Newton's Second law of motion states that

[tex]$F = ma = m\frac{v_f-v_o}{t}[/tex]

As here it starts from rest so,

[tex]$F = ma = m\frac{v_f}{t}[/tex]

So for both cases:

[tex]$F_1 = m\frac{v_f}{t_1}[/tex]

[tex]$F_2 = m\frac{v_f}{t_2}[/tex]

This gives us

[tex]$\frac{F_2}{F_1}=\frac{t_1}{t_2}[/tex]

Given that

F₂ = F₁/2

Therefore,

t₂ = 2t₁ = 2s

Thus, To achieve the same final speed with a force half as big, the force would need to push for 2 seconds.

Learn more about force

https://brainly.com/question/13191643

#SPJ4

The average velocity over a given time [3,4] is  27.19 m/sec, the average velocity over a given time [3,3.5] is 27.605 m/sec, the average velocity over a given time [3,3.1] is 27.937 m/sec and this can be determined by using the given data.

Average velocity is calculated as the displacement or change in position divided by the displacement's time intervals. In order to calculate average velocity, divide the change in position or displacement (x) by the time intervals (t) during which the displacement takes place. Based on the direction of the displacement, the average velocity might either be positive or negative. The SI unit for average speed is meters per second (m/s or ms⁻¹).

Given that:

Suppose an arrow is shot upward on the moon with a velocity of 33 m/s, then its height in meters after t seconds is given by: h(t) = 33t - 0.83t²

a) [3,4]

At time t = 3 and 4, the value of h(t) is given below:

h(3) = 33×(3) - 0.83(3)² = 91.53

h(4) = 33×(4) - 0.83(4)² = 118.72

The average velocity is given by: (118.72 - 91.53) / (4 - 3)

v = 27.19

b) [3,3.5]

At time t = 3 and 3.5, the value of h(t) is given below:

h(3) = 33×(3) - 0.83(3)² = 91.53

h(3.5) = 33×(3.5) - 0.83(3.5)² = 105.3325

The average velocity is given by: ( 105.3325 - 91.53) / (3.5 - 3)

v = 27.605

c) [3,3.1]

At time t = 3 and 3.1, the value of h(t) is given below:

h(3) = 33×(3) - 0.83(3)² = 91.53

h(3.1) = 33×(3.1) - 0.83(3.1)² = 94.3237

The average velocity is given by: (94.3237- 91.53) / (3.1 - 3)

v = 27.937

d) [3,3.01]

At time t = 3 and 3.01, the value of h(t) is given below:

h(3) = 33×(3) - 0.83(3)² = 91.53

h(3.01) = 33×(3.01) - 0.83(3.01)² = 91.8101

The average velocity is given by: (91.8101 - 91.53) / (3.01 - 3)

v = 28.01

e) [3,3.001]

At time t = 3 and 3.001, the value of h(t) is given below:

h(3) = 33×(3) - 0.83(3)² = 91.53

h(3.001) = 33×(3.001) - 0.83(3.001)² = 91.5580

The average velocity is given by: (91.5580 - 91.53) / (3.001 - 3)

v = 28

To know more about average velocity refer to:

https://brainly.com/question/24824545

#SPJ4

The complete question is as follows:

G = -9.81 m/s2 is the gravitational acceleration close to the earth. Simply multiply the acceleration of gravity by the length of time since anything was released to determine its speed (or velocity) after that period of time. Velocity is calculated as follows: V = gt = -9.81 m/s2 * time.

To Learn more About gravitational acceleration refer to:

https://brainly.com/question/14374981

#SPJ4

620V current I3, Electric circuits can be simple or sophisticated, but they all consist of the same three fundamental parts:

V = I * R = 31.00 * 20.00 = 620V.

To learn more about Ohm's Law refer to:

https://brainly.com/question/14296509

#SPJ1

The physics professor should be 3.60m far from the physics building for the egg to successfully fall on professor's head, assuming freefall motion of the egg and acceleration to be 9.80 m/s^2.

The height of the building = 46 m

The height of the professor = 1.80 m

The effective height for freefall of the egg = 46.00 - 1.80 = 44.2 m

As S = ug + 1/2a[tex]t^{2}[/tex]

44.2 = 0 + 1/2 × [tex]t^{2}[/tex] × 9.8

[tex]t^{2}[/tex] = (2 × 44.2) / 9.8

[tex]t^{2}[/tex] = [tex]\sqrt{9.02}[/tex]

[tex]t[/tex] = 3.003 s

Let the distance travelled by the professor be x

The time taken by the egg to fall is equal to the time taken by the professor to reach the building through distance x

Speed with which the professor is walking = 1.20 m/s

Now as Distance = Speed × Time,

x = 1.20 × 3.003

x = 3.6036 meters.

Learn more about freefall here:

https://brainly.com/question/17067422

#SPJ4