What is Newton's 2nd law measured in?.

1 kg-wt is equal to 9.8 Newton. It is vector quantity which has magnitude as well as direction.

The weight of an object is nothing but the gravitational force exerted by the earth on the object. Since it is a force and it is defined as the product of mass and acceleration due to gravity. And we know that the value of acceleration due to gravity is 9.8 m/s². Although it slightly changes place to place, but we take its average value 9.8 m/s².

Force = Mass × Acceleration

Force = 1 kg × 9.81 m/s²

1 kg-wt = 9.81 N

The SI unit of force is Newton.

To know more about vector quantity, here

https://brainly.com/question/8473644

#SPJ4

The names of the alphabets in the Scientific Method Review include:

HOMER is an acronym that is meant to encompass the various steps that one should take when they are engaged in Scientific Method Review. This first is to come up with a hypothesis.

The second is to operationalize this hypothesis to test it for viability. Then there is a need to measure this research and then eveluate results. Finally, one should replicate the test, revise the results, and then report.

Find out more on the Scientific Method Review at https://brainly.com/question/14329481

#SPJ1

Gravity depends on mass, not on size or density.

Gravity is a force of attraction between two objects that have mass. The force of gravity is proportional to the product of the two masses and inversely proportional to the square of the distance between them. Therefore, the more massive an object is, the stronger the gravitational force it exerts.

Size and density are not directly related to gravity. Size is a measure of how big an object is, and density is a measure of how much mass is contained in a given volume. They do not affect the strength of the gravitational force. An object's size or density may affect the gravitational force acting on it, but only through their effect on the object's mass.

So, gravity depends on mass, but not on size or density. The gravitational force exerted by an object is proportional to its mass, regardless of its size or density.

Learn more about Gravity:

https://brainly.com/question/14874038

#SPJ4

Light will reflect at the same angle off a smooth surface as when it first touches it. The direction of reflected light beams for a flat surface is the same. Specular reflection is what is happening here.

When light reflects off of a surface, it happens. Light will reflect at the same angle it was incident upon if the surface is glossy and smooth.

A smooth polished surface is what is referred to as a reflection when a light ray strikes it and bounces back. Surface reflection occurs when a light beam hits it and then leaves it.

To know more about Specular reflection visit :-

https://brainly.com/question/29191211

#SPJ1

Answer: The part of color that's reflected is the red that bounces off the paper.

Hope this helps you!!!

(☞ﾟヮﾟ)☞      ☜(ﾟヮﾟ☜)

The mechanical advantage should be 0.4 ( less than 1).

                   MA = Output force / Input force

length:

                   MA = Length of input arm / Length of output arm

                    MA = ramp length / ramp height.

A ramp makes it possible to move a heavy load to a new height using less force (but over a longer distance).

So, In this case, MA = 0.4/1 = 0.4.

To know more about simple machines visit:

https://brainly.com/question/22185

#SPJ4

The wavelength of the light beam having a frequency of 6 × 1017 hz is 0.05 nm.

To calculate the wavelength of a light beam, we can use the formula:

λ = c/f

Where λ is the wavelength, c is the speed of light and f is the frequency of the light.

The speed of light is approximately 3 x 10^8 m/s, we can use this value to find the wavelength.

λ = c/f

λ = (3 x 10^8 m/s) / (6 x 10^17 Hz)

λ = 0.05 nm

So the wavelength of the light beam is 0.05 nm.

It's important to mention that the wavelength is inversely proportional to the frequency, meaning if the frequency is high the wavelength is short and if the frequency is low the wavelength is long.

For more questions like Wavelength click the link below:

https://brainly.com/question/28781717

#SPJ4

The object has mgh total energy. Its kinetic energy will be converted into potential energy as it descends. The kinetic energy is equal to 1/2*m*v^2, where v is the object's instantaneous velocity.

The potential energy would diminish as the object continued to fall, while the kinetic energy would rise. PE = KE with v = 4.6 m/sec Between the beginning point and the lowest point of the fall, the height is always the vertical distance (and not necessarily the entire distance the body may go).

Almost all mechanical processes involve the transfer of energy between its kinetic and potential forms as well as work. Potential energy is released into the environment as kinetic energy when elastic or other forces, among others, cause it to move.

Learn more about kinetic energy Visit: brainly.com/question/25959744

#SPJ4

The speed v οf the ball when it leaves the track is 5.603 m/s.

The term "acceleration" refers tο gradual changes in direction and speed. A change in the speed οr direction of an object or point moving forward is referred to as acceleration.

Acceleration is the term used in physics tο describe the rate at which an object's velocity changes οver time. The acceleration of a body is the result of all the reaction forces acting οn it, according to Newton's second law of motion. The unit of acceleration derived from Si is the metre per square secοnd (m/s²).

Cοnservation of energy is

[tex]\mathrm{mg(\Delta h) = \dfrac{1}{2} mv^2 }[/tex]

[tex]\mathrm{ v = \sqrt{2g(\Delta h)} }[/tex]

[tex]\mathrm{ v = \sqrt{2 \times 9.81(4 - 2.4)} }[/tex]

v = 5.603 m/s

Thus, The speed v οf the ball when it leaves the track is 5.603 m/s.

To learn mοre about acceleration, visit

brainly.com/question/12550364

#SPJ4

Complete question:

The initial energy was lost in collision of a 2350 kg shark moves upward toward a 195 kg fish that is at rest and swallows it whole = 95.33 Joules.

Perfectly inelastic collisions, in contrast to elastic collisions, conserve momentum but not energy. The kinetic energy carried by the moving objects is not always conserved, even though the system's overall energy is always constant. Energy lost to the environment and converted into other forms, such heat, during an inelastic collision.

To determine the energy lost in collision, use the equation:

E = ½ (m1m2) / (m1 + m2) x v²

Where:

m 1 = mass of the object 1

m 2 = mass of the object 2

v 1 = velocity /speed of the object 1

v 2 = velocity / speed of the object 2

v 1 = v2

Hence,

E = ½ (2350 x 195) / (2350 + 195)

= ½ (485250) / (2545)

= 95.33 Joules.

Learn more about kinetic energy here: https://brainly.com/question/30266486

#SPJ4

The magnitude of the vector 6i-2j +3k is

A vector's length determines its magnitude. It is also known as the vector's absolute value or its absolute modulus. The Pythagorean theorem is used to determine a vector's magnitude.

The length of a given vector, let's say v, is determined using the magnitude of a vector formula, which is indicated as |v|. In essence, this amount represents the distance between the vector's beginning point and ending point. The vector's length is its magnitude, and its direction is the direction it is pointing.

With just a few straightforward steps, it is simple to calculate a vector's magnitude. Finding the cross product, the angle between two vectors, and adding and subtracting vectors are further crucial vector operations.

[tex]= \sqrt{a^{2}+b^{2}+c^{2} } \\\\= \sqrt{6^{2}+2^{2}+3^{2} } \\\\\\= \sqrt{36+4+9 } \\\\\\= \sqrt{49 }[/tex]

= 7

Learn more about magnitude Visit: brainly.com/question/3184914

#SPJ4

Correct Question:

What is the magnitude of the vector 6i-2j +3k?.

Answer: The answer is (D) [tex]v_{f} = 0[/tex]

Explanation: Here is a guide to the symbols that are presented in the options:

In option (A), it is Δx = 0, it is read as "del of x equals zero." Δx represents the change in the position of a particular object.

In option (B), it is [tex]v_{i}[/tex] = 0, here [tex]v[/tex] denotes the velocity of the object, and 'i' denotes the initial. So,  [tex]v_{i}[/tex] denotes the initial velocity of the object.

In option (C), it is a = a, and 'a' denotes the acceleration of the object.

In option (B), it is [tex]v_{f}[/tex] = 0, here [tex]v[/tex] denotes the velocity of the object, and 'f' denotes the final. So,  [tex]v_{f}[/tex] denotes the final velocity of the object.

The question asked about the meaning of "comes to a stop." When an object comes to a stop it means it has no or 0 velocity, which means the final velocity becomes 0. hence, option (D) is the correct answer.

To learn more about velocity and acceleration:

https://brainly.com/question/13639113

https://brainly.com/question/28743430

Answer:

The distance = 14.7 m ( approx 15m)

Explanation:

Hopefully everything is clear for you!

Explanation:

x=(80²-0²)/2×4

x=6400/8

x=800m

Answer:Therefore, the speed of the object that has 9000 J of kinetic energy and a mass of 35 kg is 22.68 m/s.

Explanation:

An object has 9000 J of kinetic energy and a mass of 35 kg. What is the object's speed?

Data:

Ec = kinetic energy = 9000 J

m = mass = 35 kg

V = speed = ?

The formula of potential energy;

Where

We clear for speed, substitute data and solve:

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{Ec=\frac{m*v^2}{2} \iff \ V=\sqrt{\frac{2*E_c}{m} } } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{V=\sqrt{\frac{2*9000 \ J}{35 \ kg} } } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{V=\sqrt{\frac{18000 \ J}{35 \ kg} } } \end{gathered}$}}[/tex]

Before continuing to answer, we work with the units, which in this case is Joules.

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{V=\sqrt{\frac{18000 \ N*m}{35 \ kg} } } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{V=\sqrt{\frac{18000 \ \not{kg}*\dfrac{m}{s^2} *m}{35 \not{kg}} } \iff V=\sqrt{\frac{1800 \ \dfrac{m}{s^2} *m}{35} } } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{V=\sqrt{\frac{18000 \ \dfrac{m^2}{s^2} }{35 \ } } } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{V=\sqrt{514.2857142857142857 \ \frac{m^2}{s^2} } } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{V=\sqrt{514.286 \ \frac{m^2}{s^2} } } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{V=22.6778746799606422=22.6778 \ m/s } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{V \approx22.68 \ m/s } \end{gathered}$}}[/tex]

Therefore, the speed of the object that has 9000 J of kinetic energy and a mass of 35 kg is 22.68 m/s.

A solenoid is the device that converts electrical energy into linear mechanical force.

Solenoid. a substantial length of electrically current-carrying insulation wire. Where solenoids are used Many devices require the production of a powerful magnetic field. Putting it another way, a solenoid turns electrical energy into mechanical work. Copper wire is tightly wound in numerous turns to create the coil. This wire produces a powerful magnetic field or flux when an electrical current runs through it.

Any object that produces a magnetic field is referred to as a magnet. This undetectable magnetic field, which also attracts or repels other magnets, is what makes a magnet stand out from other ferromagnetic materials such as iron, steel, nickel, cobalt, etc.

To know more about electrical energy visit:

https://brainly.com/question/6572753

#SPJ4

       Alternating current supplied to the loudspeaker creates sound waves in the following way:

         A current in the coil creates a magnetic field around it. The magnetic field interacts with the permanent magnet generating a force, which pushes the cone outwards. The current changes direction.

  A change in the magnetic field through a coil can induce a potential difference across it which drives a current. The voltage and current changes in a transformer can be calculated, as power transfer is constant.

The motor effect is used inside headphones, which contain small loudspeakers. In these devices, variations in an electric current cause variations in the magnetic field produced by an electromagnet. This causes a cone to move, which creates pressure variations in the air and forms sound waves.

The end of the speaker cone is surrounded by a permanent magnet. A coil of wire which carries electrical signals is wrapped around the end of the cone. The movement generated causes the cone to vibrate.

The alternating current supplied to the loudspeaker creates sound waves in the following way:

    6.    Repeatedly alternating the current direction makes the converts vibrate in and out.  

To learn more about loudspeakers at :   https://brainly.in/question/392187

A counterclockwise spin in figure skating is known as a "backspin" or "backward spin."

It isn't always special whether the figure skater is capable of keep control for the duration of the spin. It'd depend upon the skater's skill stage and the precise conditions of the spin. Factors inclusive of the skater's balance, pace, and technique can all play a function in figuring out if they're able to keep manage. Moreover, the surface of the ice and any distractions within the environment might also affect the skater's ability to maintain manipulate. Average, the capacity to keep manipulate in the course of a spin can range significantly depending at the individual skater and the unique situations of the spin.

To know more about Unique Situations visit: https://brainly.com/question/28536415

#SPJ1

Uranium contains almost 16,000 times as much energy per unit weight as coal, hence the statement that only 0.7% of uranium can fission with a single, low-energy neutron is true.

Does uranium possess a lot of energy?

An plentiful metal with a lot of energy is uranium: One ton of coal, 149 gallons of oil, or 17,000 cubic feet of natural gas are all equivalent in terms of energy production to one uranium fuel pellet.

Other than uranium, what has higher energy?

In a liquid fluoride thorium reactor, it is thought that one ton of thorium may generate as much energy as 35 tons of uranium. A well-functioning reprocessing reactor can use 99% of its thorium fuel, compared to conventional reactors that use less than 1% uranium.

To know more about neutron visit:

brainly.com/question/17038358

#SPJ4

To calculate the water pressure that acts on the hull of the boat, we can use the equation:

Pressure = Force / Area

The force acting on the hull is the buoyant force, which is equal to the weight of the water displaced by the boat. Since the boat is floating, the weight of the water displaced is equal to the weight of the boat. Therefore:

Force = Weight of boat = 20,000 N

The area of the hull that is in contact with the water is 4 m2

Therefore, the water pressure acting on the hull of the boat is:

Pressure = Force / Area = 20,000 N / 4 m2 = 5000 N/m^2

The pressure unit is Newtons per square meter (N/m^2) also known as Pascals (Pa).

It's important to note that the weight of the boat and the water displaced are in Newtons and the area of the hull is in square meter, that's why the pressure is in N/m^2.

The first law of Newton, sometimes referred to as the law of inertia, holds that unless an external force acts upon an item, it will continue to be at rest or move at a constant speed.

The first law of Newton, sometimes referred to as the law of inertia, holds that unless an external force acts upon an item, it will continue to be at rest or move at a constant speed.

This implies that an object will continue to move in its existing manner in the absence of any external pressures. In other words, unless a net acts on it, an item in motion will continue to travel in a straight path at a constant speed.

To learn more about newton's 1st law at

https://brainly.com/question/27573481?referrer=searchResults

#SPJ4

Values of the Resistor Color, Code Calculation.

Values of the Resistor Color,  Code Calculation

As an example, a resistor has the corresponding colored marks; Yellow, violet, and red together equal 4 7 2 (4 7 x 102 = 4700 or 4k7 Ohm). The resistor's % tolerance is assessed using the fourth and fifth bands. Green, blue, red, and gold make up the 4 bands. Green represents the number five, and blue the number six, according to the color coding table.

first digit=green=5

Second digit=blue=6

3rd color=brown=multiplier=10

4th=gold=tolerance=5%

therefore,

R=56×10  with 5% tolerance

R=560Ω with 5% Tolerance

To learn more about Resistor Color  refer to:

https://brainly.com/question/28015426

#SPJ1

The velocity of the block at 3.40 m from the top of the slope is 2.687 m/s.

Acceleration is the rate of change of velocity. Acceleration usually implies a change in velocity, but not always. If an object is moving in a circular orbit with constant velocity, it is still accelerating because the direction of its velocity is changing.

The acceleration of the block is m/s2

By the equation of motion,

With [tex]v^{2} -u^{2} =2as[/tex] and

3.82 = [tex]2*a*6.8[/tex]

=> 1a = 3.8²/6.8

Let v be the velocity 3.4 m from the vertex, then v2 = 2a3.4 = (3.8^2 /6.8)*3.4 = 3.8² /2

v = 3.8/√2 = 2.687

Velocity is 2.687 m/s. The velocity of the block at 3.40 m from the top of the slope is 2.687 m/s.

Learn more about Acceleration

brainly.com/question/28743430

#SPJ4

To calculate the magnitude of a two-dimensional vector from its coordinates, do the following: determine its constituents. Then find the sum of each of its components' squares. And take the square root of the resulting sum.

A vector's magnitude is equal to its length. The formula for determining the magnitude of a vector v = (x, y) in two dimensions is: |v| = √(x² + y²). The Pythagorean theorem is used to derive this formula.

The formula for determining the magnitude of a vector V = (x, y, z) in three dimensions is: |V| =√ (x² + y² + z²).

Learn more about vector here: https://brainly.com/question/30214996

#SPJ4

How to Calculate a Vector's Magnitude and Direction from its Components.

Step 1: Use the equation A=√A2x+A2y A = A x 2 + A y 2 to calculate the magnitude of the vector.

Step 2: Use the equation Θ=tan−1(AyAx) Θ = tan − 1 ⁡ ( A y A x ) to calculate the direction of the vector.

As we know, the vector is an object which has both the magnitude as well as direction. To find the magnitude of a vector, we need to calculate the length of the vector. Quantities such as velocity, displacement, force, momentum, etc. are vector quantities. But speed, mass, distance, volume, temperature, etc. are scalar quantities. The scalar has the only magnitude, whereas the vectors have both magnitude and direction.

The magnitude of a vector formula is used to calculate the length for a given vector (say v) and is denoted as |v|. So basically, this quantity is the length between the initial point and endpoint of the vector. To calculate the magnitude of the vector, we use the distance formula.

Learn more about magnitude at https://brainly.com/question/14452091.

#SPJ4

Finding the lever arms to the point of application of the force and multiplying it yields the amount of the a torque about just a fixed axis.

Finding the moment arm and multiplying it by the applied force is a useful approach to ascertain the torque's magnitude. The distance that separates the rotational axis from the force's direction of action is known as the lever arm. and the torque has a magnitude of N m.

Each force will then result in a torque. The total of the various torques is the net torque. Translational equilibrium, in which the sum of the forces is equal to zero, is equivalent to rotational equilibrium. The total torques are equal to zero in rotational equilibrium.

to know more about torque visit:

brainly.com/question/29024338

#SPJ4

Answer:

Reference Sound Intensity (Io) = 10^-12 W/m² the threshold of hearing at 1Khz and 0 dB when calculating sound intensity levels in decibels, resulting in the more practical range of 0 to 120 dB.

Explanation:

Recreational vessels approaching a U.S. naval vessel must slow to a minimum speed at a distance of 500 yards or more from the U.S. naval vessel.

This requirement is outlined in the U.S. Code of Federal Regulations (CFR) 33 § 81.15, which states that all vessels must "proceed at a safe speed" and "maintain a proper lookout" when approaching or passing a naval vessel.

In addition to slowing to minimum speed, recreational vessels must also follow other safety measures when approaching a U.S. naval vessel.

These include staying clear of the vessel's intended course and not impeding its progress, as well as following any signaling or other instructions given by the naval vessel.

Failure to comply with these regulations can result in fines or other penalties.

In conclusion, recreational vessels approaching a U.S. naval vessel must slow to a minimum speed at a distance of 500 yards or more, and follow other safety measures as outlined in the U.S. Code of Federal Regulations to ensure the safety of all vessels involved.

Learn more about naval vessels at

https://brainly.com/question/15657849

#SPJ4

Shear force times the parallel distance equals the bending moment. Since the distance has always been zero at support, the BM of a just supported beam will also be zero.

The metre is the SI unit of length (m). Centimeters (cm) can be used to measure short distances, whereas kilometres can be used to measure great distances (km). For instance, you might calculate the kilometres between your home and school and the centimetres between the bottom and top of a piece of paper as examples.

In the International Measurement system, a metre is the unit of distance. It's interesting to note that by utilising this as the basic unit and a few calculations, a variety of different derived units or quantities, including volume, area,

To know more about distance visit:

https://brainly.com/question/13034462

#SPJ4

No, mass and speed are two different physical quantities that do not have any direct relationship.

Mass is a scalar quantity that measures the amount of matter in an object, it is independent of its location or motion and it is constant. It is the same whether an object is at rest or in motion.

Speed, on the other hand, is a measure of how fast an object is moving. It is the distance an object travels in a certain amount of time and it can change. For example, an object can be moving at a high speed or at a low speed.

In the theory of special relativity, mass and energy are closely related and, as a result, the mass of an object increases as it approaches the speed of light. But this is only for objects that are moving at a velocity close to the speed of light, but for everyday objects, mass does not depend on speed.

So, the mass of an object does not change with its speed, but the energy of an object does increase as its speed increases.

Learn more about mass:

https://brainly.com/question/19694949

#SPJ4

The distance between the pivoting force and the resisting force is 1.2. Resistance is the capacity of a substance to block the movement of electrical current.

Resistance measures how easily energy will flow throughout a circuit by using the ohm () as the unit. Current increases when resistance decreases, and decreases when resistance increases. Resistance is important to ensure that water flows through circuits at the correct rate.

As resistance rises, the amount of current that flows diminishes. One of the causes, if abnormally high, could be conductivity damage from corrosion burning. Since all semiconductors emit some heat, temperature rise is a frequent issue connected to resistance.

15*4 = 50x

60 = 50x

1.2 = x

To know more about resistance visit:

https://brainly.com/question/11431009

#SPJ4