Answer:
A theory is an opinion but in fancy format.
Explanation:
it is an explanation of observed regularities. The terms "established" and "observed regularities" are important here.
A theory is a way to explain a opinion on a certain topic.
a roller coaster of mass 2000kg is rolling down a track with an instantaneous speed of 10m/s
The given is:Mass – 2000 kg
The given is:Mass – 2000 kgInstantaneous speed – 10 meter per second
Step: 1Step: 1K.E= 1/2mv^2
Where, K.E – Kinetic energy in joules:
m – Mass in kg
v – Velocity or speed in meter per second
Step: 2From the give,
m = 2000 kg
v = 10 m/s
Equation (1) becomes,
K.E= 1/2 (2000) (10)^2
= (0.5)(2000)(100)
= 100000
K.E = 100,000 Joules
The kinetic energy is 100,000 Joules, if a roller coaster of mass 2000 kg is rolling down a track with an instantaneous speed 10 m/s.
The diagram shows the water levels inside the containers.
A)91 cm
B) 34 cm ( the water levels)
•) The density of water is 1000 kg/m²
ii) Calculate the pressure that the water causes at the base of container A.
Answer:
8927.1 Pa
Explanation:
pressure = height x density of liquid x g
= (91/100) x 1000 x 9.81
= 8927.1 Pa
The mechanical energy of the diver is the same at every height. What is the mechanical energy of the diver
The velocity as a function of time of a moving particle is given by v = α+ βt2 , where α and β are constants and t is time in s. What is the acceleration of the particle at 3 s?
The acceleration of the particle at 3s is [tex]a = 6 \beta [/tex]
[tex]v = \alpha + \beta {t}^{2} [/tex]
How to calculate acceleration[tex]a = \frac{dv}{dt} \\ v = \alpha + \beta {t}^{2} \\ \frac{dv}{dt} = 0 + 2 \beta t \\ [/tex]
if Time is given as 3s
therefore, Acceleration is
[tex]a = 2 \beta t \\ a = 2 \beta 3 \\ a = 2 \times \beta \times 3 \\ a = 6 \beta [/tex]
Acceleration is
[tex]a = 6 \beta [/tex]
What is acceleration and velocity?This is the change in velocity with respect to time.
Velocity is a vector quantity that denotes the rate of change of position with respect to time, or a speed with the directional component.
Read more about velocity:
https://brainly.com/question/19365526
A 1.2-kg mass is oscillating without friction on a spring whose spring constant is 3400 N/m. When the mass's displacement is 7.2 cm, what is its maximum acceleration
The maximum acceleration of the mass oscillating on the spring whose spring constant is 3400 N/m, is determined as 204 m/s².
Applied force on the springThe force applied on the spring to cause the mass to displace to the given distance is determined by applying Hooke's law;
F = kx
F = (3400 N/m) x (0.072 m)
F = 244.8 N
Maximum accelerationThe maximum acceleration of the mass is determined from Newton's second law of motion as shown below;
F = ma
a = F/m
a = 244.8 / 1.2
a = 204 m/s²
Learn more about acceleration here: https://brainly.com/question/14344386
The emf of a battery is E = 20 V . When the
battery delivers a current of 0.2 A to a load,
the potential difference between the terminals
of the battery is 18 V volts.
Find the internal resistance of the battery.
Answer in units of Ω.
Answer:
10 ohms
Explanation:
V = IR
2 v is the drop in the battery
2 = .2 R
R = 10 ohms
An inductor produces a back emf in a dc series rl circuit when a switch connecting the battery to the circuit is closed. We can explain this by.
Hi there!
Let's say that a series RL circuit is constructed, with the switch left open.
When the switch is closed, a current will start flowing in the circuit. The INCREASING current will go through the loops of the inductor, producing an INCREASING magnetic field and consequentially a magnetic flux through the inductor. (Use hand rules).
However, the inductor does NOT want to experience this increasing magnetic flux, so an emf in the OPPOSITE direction of the current will be produced to counteract the increasing flux. (The flux would also be in the opposite direction).
This is expressed with the equation:
[tex]\epsilon = -L \frac{di}{dt}[/tex]
ε = Back emf (V)
L = Inductance (H)
i = Current (A)
t = time (s)
With the negative sign, we can see that if the current of the circuit is INCREASING, the emf produced would be in the opposite direction.
If we say that a galaxy has a lookback time of 1 billion years, we mean that _________.
Answer:
its light traveled through space for 1 billion years to reach us
Explanation:
What do you mean by electromagnetic induction?
What do you mean by electromagnetic induction ?
Well Explained Answer : -Discovery : -
A British scientist Michael Faraday and an American scientist Joseph Henry discovered the phenomenon of electromagnetic induction in 1831 independently.
Definition / Meaning : -
The production of electricity from magnetism is called electromagnetic induction.
Or ,
Electromagnetic induction is the phenomenon of the production of an induced current in a coil placed in a region where the magnet field changes with time
For Example : -
(i) If a bar magnet is moved in and out of coil of wire , even then an electric current is produced. This is an example of electromagnetic induction.
(ii) Another example , when a straight wire is moved up and down rapidly between the two poles of a horseshoe magnet , then an electric current is produced in the wire. This is also an example of electromagnetic induction .
#[tex] \rm{ \bold{Keep \: Learning}}[/tex]Electromagnetic induction denotes to producing electricity using magnetic field or magnetism.
This is the process or phenomenon of production of induced induced current in a region where magnetism changes with respect to the time.
It was discovered by great scientist Michael Faraday.
1) anything that has mass and takes up space is called
A. Tissues
B. Mass
C. Matter
D. Atomic number
E. Weight
2) mechanical energy is
A. Found in machinery only
B. Usually measured at the atomic level
C. The sum of the chemical and thermal energy of an object
D. The sum of the kinetic and potential energy of an object
( please answer it guys i really bad at my physics TnT))
[tex]\qquad \qquad \huge \pink {\sf{☁Answer☁}} \\ \\ [/tex]
Anything that has mass and takes up space is :-[tex]\pink{\boxed{\sf{↪Option.c↩}}}[/tex]
→Matter✓
mechanical energy is[tex]\pink{\boxed{\sf{↪Option.d↩}}}[/tex]
→The sum of the kinetic and potential energy of an object✓
___________________☃️[tex]\sf{\:мѕнαcкεя\: ♪...}[/tex]
Fluorescence occurs when an object absorbs ____________________ and immediately releases the energy as visible light.
Answer:
The answer should be light or other electromagnetic radiation
Explanation:
Such as x-rays or other things like that.
-Hope This Helps!
-Justin:)
Which planet, other than earth, has visible water ice on it?.
The ratio of force and mass is known as
A. Velocity B. Momentum C. Acceleration D. Displacement
Answer:
Acceleration
Explanation:
We know that Force = Mass * Acceleration according to the formula.
Divide both sides by “Mass” which leaves us with Force/Mass = Acceleration, in word, it’s ratio of force and mass equals acceleration.
1. Dylan claims that the vase would achieve a higher height if it were launched at a 45-degree angle. Is
Dylan correct?
A. Dylan is correct because a 45-degree launch angle results in the largest vertical range.
B. Dylan is correct because larger launch angles result in a smaller vertical range.
C. Dylan is incorrect because a 90-degree and 45-degree larr
tin the same vertical
range.
D. Dylan is incorrect because a 90-degree launch angle resuh
vertical range
Which condition is necessary for a lunar eclipse to occur?.
For a lunar eclipse to occur, the Sun, Earth, and Moon must be roughly aligned in a line. Otherwise, the Earth cannot cast a shadow on the Moon's surface and an eclipse cannot take place. When the Sun, Earth, and Moon come together in a straight line, a total lunar eclipse takes
Copper (II) chloride reacts with magnesium nitride
Answer:
I don't know
Explanation:
because I'm not smart
What was the first car fitted with an alternator, rather than a direct current dynamo?.
Answer:
The first vehicles fitted with an alternator was vehicles during WWll.
Chrysler Corporation fitted an alternator on the Valiant 1960 as standard equipment
Explanation:
Answer:
The first car fitted with an alternator, rather than a direct current dynamo was the 1960 Plymouth Valiant.
Explain How can an endergonic reaction not be endothermic?
Answer:
Answer below in pic
I hope my answer helps you.
Answer:
I totally agree with what the person above me said.It is correct
PLEASE SOMEONE HELP!! what is the answer? WILL MARK BRAINLIEST!!
Answer:
A.
Explanation:
The answer should be A.
i apologize if it is incorrect-
I hope it helps! Have a great day!
Anygays-
How much required force is required to move a 100kg box to get it moving? Static friction is 0.5, kinetic friction is 0.3 and gravity is 9.5m/s^2
Answer:
47.5 N
Explanation:
Given
mass, m = 100 kgcoefficient of static friction, μ(s) = 0.5coefficient of kinetic friction, μ(k) = 0.3gravity due to acceleration, g = 9.5 m/s²Solving
It asks the required force to get it moving ⇒ static frictionForce required to move = μ(s) x m x gF = 0.5 x 100 x 9.5F = 95 x 0.5 = 47.5 NThe worker in the picture is
a.) letting the pulley do all the work
b.) not doing work because he is using a pulley
c.) doing work because he is moving the bale of cotton
d.) transforming mechanical energy to potential energy
Answer:
the worker is doing work because he is moving the bale of cotton
What holds the moon in place, orbiting around earth?
Answer:
Gravity
Explanation:
How much work can a 1000-watt motor do in 5.0 seconds?
A. 4.0 × 101 J
B. 2.0 × 102 J
C. 5.0 × 103 J
D. 2.5 × 104 J
Answer:
C
Explanation:
watt = j/sec and work = j
so multiply watt * sec to get work
1000 j/sec * 5 sec = 5000 j = 5 x 10^3
Find the ( mass m ) when system is equilibrium help me pleasee this choice is
1. 4 kg
2. 6.25 kg
3. 10 kg
4. 12.5 kg
5. 25 kg
please show solution
Answer:
5. 25 [kg].
Explanation:
1) the final ratio is:
m_20kg *g=m*g/cos37°; ⇒ m= m_20kg / cos37°;
2) answer is:
m=20/0.8=25 [kg].
Adaptations are unique traits developed by organisms to help them survive, thrive, and reproduce in their particular environment. Adaptations may be structural or behavioral. Which of the following is an example of a behavioral adaptation?
A) shallow roots of cacti
B) long neck of a giraffe
C) migration of birds
D) webbed feet of ducks
Answer:
its c - the migration of birds
Explanation:
i did it on study island
elastic materials maintain their nature in all circumstance. true or flase
Answer:
False
Explanation:
If an elastic material is stretched with enough force it will go beyond its 'Elastic Limit' otherwise known as its 'Limit of Proportionality'.
When this happens permentant deformation wiil occur.
Think of a spring... if it is stretched with enough force it won't return back to its original shape. Therefore it has NOT maintained its nature.
Please Help Physics!
1. Sound travels through a guitar string at 600 m/s, making a sound wave in the air with a speed of 333 m/s. In 1–2 sentences, explain how the wavelength and frequency of the wave in the string compare to the wavelength and frequency of the wave in the air.
The wavelength and frequency of the sound in the string is greater than the wavelength and frequency of the sound in the air.
Wavelength and freqeuncy of the soundThe wavelength and frequency of the sound is determined using the following formulas.
v = fλ
f = v/λ
λ = v/f
where;
f is the frequency of the soundλ is the wavelengthWavelength and frequency of the sound in the stringf = 600/λ
λ = 600/f
Wavelength and frequency of the sound in airf = 333/λ
λ = 333/f
Thus, the wavelength and frequency of the sound in the string is greater than the wavelength and frequency of the sound in the air.
Learn more about wavelength and frequency here: https://brainly.com/question/10728818
Please help me with the blanks
Answer:
wavelength and frequency
Explanation:
wavelength is the distance between waves while frequency is the number of times in which the wave occurs.
How many Watts of power does a model rocket engine have if it does 66 J of work on a model rocket in 0.9 seconds?
Power developed by a model rocket engine will be 73.3 watts. Power is the ratio of the work done or the enrgy to the time period.
What is the power output?The rate of the work done is called the power output. It is denoted by P.Its unit of a watt.
The given data in the problem is;
E is the energy = 66 J
P is the power output =?
t is the time period = 0.9 sec
The power output is given as;
[tex]\rm P = \frac{E}{t} \\\\ \rm P = \frac{66}{0.9} \\\\ \rm P = 73.3 \ watt[/tex]
Hence power developed by a model rocket engine will be 73.3 watts.
To learn more about the power output refer to the link;
https://brainly.com/question/22285866
#SPJ1
Matter can undergo chemical reactions and nuclear reactions. Which
property is conserved in chemical reactions but NOT in nuclear reactions?
O A. Type of energy
O B. Kinds of compounds
O c. Number of atoms
O D. State of matter
State of matter is conserved in chemical reactions but not in nuclear reactions.
What is not conserved in a nuclear reaction?
In a nuclear reaction, mass is not conserved because of the release of radiation. The difference in masses of reactants and product nuclei, occurs due to release of energy.
So we can conclude that State of matter is conserved in chemical reactions but not in nuclear reactions.
Learn more about reaction here: https://brainly.com/question/26018275
#SPJ1
Nuclear and chemical processes are both possible in the matter. In chemical processes, the property of no atoms is conserved, but not in nuclear reactions. Option C is correct.
What is nuclear fusion?The process by which two or more tiny nuclei unite to generate a bigger nucleus is known as a nuclear fusion reaction.
The more energy it takes to liberate an electron from a smaller atom. This is referred to as binding energy.
In the nuclear reaction, one atom gets disassociated with the other atom. The process is known as nuclear fission.
Nuclear and chemical processes are both possible in the matter. In chemical processes, the property of no atoms is conserved, but not in nuclear reactions.
Hence, option C is correct.
To learn more about nuclear fusion refer to the link;
https://brainly.com/question/14019172
#SPJ1
