Why is 1 kg equal to 9. 8 Newtons?.

The distance of this point from the center of the earth will be 3.46* 10^8 m due to gravitational pull.

Gravity is the force that pulls objects toward the center of a planet or other object. During their orbits around the sun, all the planets are held in place by gravity. When the gravitational pull of the moon on the astronaut becomes stronger than the gravitational pull of the earth,

Force Ea< Force Ma

G [tex]\frac{MgMa}{x^{2} }[/tex]<= G [tex]\frac{MmMa}{(L-x)^{2} }[/tex]

[tex]\frac{1.98* 10^(24)}{x^{2} }[/tex]<= [tex]\frac{7.36* 10^(22)}{(3.84*10^8-x)^{2} }[/tex]

so solving,

x= 3.46*10^8 m.

So, The distance of this point from the center of the earth will be 3.46* 10^8 m due to gravitational pull.

Learn more about Gravitation

brainly.com/question/14874038

#SPJ4

Answer:

18.75 °C

Explanation:

Q = mcΔT

ΔT = Q / (mc)

convert g → kg

200 g = 0.20 kg

ΔT = (1500 J) / (0.20 kg)(400 J/kg·°C) = 18.75 °C

Taking into account the definition of calorimetry,  the increase in temperature is 18.75°C.

Calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.

In this way, between heat and temperature there is a direct proportional relationship, where the constant of proportionality depends on the substance that constitutes the body and its mass.

The equation that allows to calculate heat exchanges is:

Q = c× m× ΔT

where:

In this case:

Replacing in the definition of calorimetry:

1500 J= 400  J/(kg °C)× 0.200 g× ΔT

Solving:

1500 J÷ [400  J/(kg °C)× 0.200 g]= ΔT

18.75 °C= ΔT

In summary, the temperature variation is 18.75°C.

Learn more about calorimetry:

brainly.com/question/11586486

#SPJ1

Answer:

4.42 m/s EAST

Explanation:

Conservation of Momentum Law:  total momentum before the collision must equal the total momentum after the collision.

Momentum = P = mv

East is the positive direction.

(3000 kg)(15 m/s) - (2200 kg)(10 m/s) = (3000 kg + 2200 kg)v

45,000 kg·m/s - 22,000 kg·m/s = (5200 kg)v

23,000 kg·m/s = (5200 kg)v

v = (23,000 kg·m/s) / 5200 kg = 4.42 m/s EAST

The direction is east because the final velocity is (+)

The formula for acceleration down a slope is a = g * sinθ where g is gravity and sinθ is an angle of the slope with horizontal field.

The formula is come from comparing two force formula that are F = m * a and F = m*g cosθ where m is mass of the object and g is gravity. The creation of the formula are made like this :

F = m*g sinθ

m * a = m*g sinθ   delete the same variable

a =  g sinθ

Since sinθ is define as  cos(90 - θ), the formula can be written as

a = g cos(90 - θ)

Learn more about law of motions here

https://brainly.com/question/26083484

#SPJ4

A wired connection to the internet offers higher speed and lower latency.

An Ethernet cable provides much faster delivery of your web address requests to your internet service provider, resulting in lower latency and faster speeds for your Internet connection. Your internet connection speeds might impact your ping in addition to the different elements that determine how good your ISP is or latency. Your ping will decrease as a result of faster data transmission and reception.

Distance, propagation time, internet connection type, website content, Wi-Fi, and router all have an impact on latency. Some of these issues can be resolved, while others are inevitable in the online world for everyone.

To learn more about Latency :

https://brainly.com/question/17273267

#SPJ4

The energy  consumed for leaving 100 W light on 24/7 for 10 days is

8,64 X [tex]10^{7}[/tex] J (Joule)

Power for light (P) = 100 W = 100 J/S (Joule / Second)

Time consuming (T) = 24 hours for 10 days

                                 = 10 days x 24 hours x 3600 second

                                 = 864.000 S (second)

Based on the formula for Power

P = [tex]\frac{Energy}{Time}[/tex]

We can find the E (Energy) that was consumed by Dimmy Waistalott

Energy = P x T

            = 100 J/S x 864.000 S

            = 86.400.000

            = 864 x [tex]10^{5}[/tex] J

         E = 8,64 x [tex]10^{7}[/tex] J

Learn more about Energy Power here

https://brainly.com/question/27877700

#SPJ4

The force exerted on the woman by the seat belt is equal to 50 kg x 20 m/s2 = 1000 N.

Force is a push or pull that acts upon an object, causing it to accelerate or change direction. It is an influence that can cause an object to change its motion, direction, shape, or even energy. Force can be generated through direct physical contact, or it can be generated from a distance, such as when a magnet pulls on a piece of metal. Forces are measured in newtons, and the SI unit for force is the Newton (N).

The force exerted on the woman by the seat belt is equal to her mass times the acceleration experienced by the car. The acceleration of the car is equal to the change in velocity (10 m/s) divided by the time it took for the car to stop (0.50 s), which is equal to 20 m/s2. Therefore, the force exerted on the woman by the seat belt is equal to 50 kg x 20 m/s2 = 1000 N.

To learn more about force

https://brainly.com/question/12785175

#SPJ4

Yes, the latency may increase with increase in distance because latency is directly proportional to the distance and inversely proportional to the propagation speed.

Latency refers to the delay in time which takes place when a unit of data commonly referred to as packets are transferred from one place to another. It is because of the interruptions by other digital networks or low internet speed. It is given by the formula that latency is the ratio of propagation distance to propagation speed. Thus greater the distance, greater will be the latency. Latency must be low to provide most closer real time approach while communicating online, such as in video conferences, meetings or online chatting.

Learn more about latency at:

brainly.com/question/30227967

#SPJ4

Answer:

10s A horse with an average speed of 15 m/s run.

Hope it helps! :)

The number of laws of physics can vary depending on how they are defined and categorized. In general, there are four fundamental forces of nature that govern the behaviour of matter and energy: gravity, electromagnetism, the strong nuclear force, and the weak nuclear force.

These forces are described by a set of mathematical equations, known as laws of physics, that predict how objects will behave under different conditions. Additionally, there are many other physical principles and laws that have been discovered and developed over time to explain a wide range of phenomena, such as the laws of thermodynamics, the laws of motion, quantum mechanics, and special and general relativity.

Overall, the number of laws of physics is considered to be vast and diverse.

Learn more about Laws of Physics here: https://brainly.com/question/12253978

#SPJ4

The S.I value of Newton's gravitational constant G  will be 6.674×10⁻¹¹ (Newton.meter².kg⁻²) .

The gravitational constant, denoted by the capital letter G and also known as the universal gravitational constant, Newtonian constant of gravitation, or Cavendish gravitational constant, is an empirical physical constant that is used to calculate the gravitational effects in both Albert Einstein's theory of general relativity and Sir Isaac Newton's law of universal gravitation.

It is the proportionality constant in Newton's law that links the gravitational force between two bodies to the sum of their respective masses and the square root of their distance. It quantifies the relationship between the energy-momentum tensor and the spacetime geometry in the Einstein field equations (also referred to as the stress–energy tensor).

We can reasonably say that we know the measured value of the constant to four significant digits. SI units is 6.674 ×10⁻¹¹(Newton.meter².kg⁻²) .

To know more about gravitational constant

https://brainly.com/question/30145931

#SPJ4

Optimizing network infrastructure, reducing network hops, caching frequently requested data and using protocols designed for low latency such as UDP.

Optimizing network infrastructure, reducing network hops, caching frequently requested data and using protocols designed for low latency such as UDP can help improve low latency.

Additionally, using a Content Delivery Network (CDN) can help reduce the physical distance data needs to travel, and implementing Quality of Service (QoS) can help prioritize and manage network traffic.

Minimizing the amount of data that needs to be sent, such as by compressing files, can also help reduce latency. Furthermore, reducing the number of devices or intermediaries between the source and destination can also decrease latency.

Finally, using edge computing, where data is processed closer to the source, can also help reduce latency.

Learn more about latency:

https://brainly.com/question/28234702

#SPJ4

The magnitude of vector AxB = |AxB| = A B sinθ, like the dot product, is the angle formed by the vectors A and B when drawn tail-to-tail.

AxB represents the cross product (or vector product) of two vectors A and B. A cross-product produces a new vector. We must determine its magnitude and direction.

Direction: AxB is perpendicular to the plane defined by A and B.

To determine whether it is pointing into or out of the plane, use the right-hand rule (RHR).

RHR (right-hand rule): This is how it works. Consider an axis perpendicular to the plane that runs through the tails of A and B. With your fingers, grasp the axis.

Learn more about vector here: https://brainly.com/question/30214996

#SPJ4

Momentum describes the relationship between an object's mass, velocity, and direction. Any change in momentum generates force. As a result, a change in momentum is used to calculate the force acting on the object.

It is measured by "mass velocity," because momentum is affected by velocity and the direction of the body's motion. Because velocity is a vector and mass is a scalar quantity, momentum is a vector quantity. Momentum is defined as mass multiplied by velocity. The definition of momentum is "mass moving." Because all objects have mass, when they move, they have momentum - their mass is in motion. Momentum is a moving body's amount of motion, calculated as the product of its mass and velocity. It has the formula mass velocity.

Here,

The relationship between an object's mass, velocity, and direction is described by momentum. Any change in momentum results in the generation of force. As a result, the force acting on the object is calculated using a change in momentum.

To know more about momentum,

brainly.com/question/22418297

#SPJ4

When two different molecules travel in opposite directions through the same carrier or transport protein—one into the cell and the other out of the cell—the protein is said to be an antiport.

Proteins called symports allow two molecules to go across membranes in the same direction (also called symporters, synports, or symporters). The movement of two molecules across the bilayer in opposite directions is accomplished by an antiport protein. Ions can move more easily when proteins called ionophores are present. To move molecules like glucose, transport proteins employ a passive strategy. Transport proteins, however, actively allow sodium and potassium ions to cross the neuronal membrane in spite of the concentration gradient.

Learn more about molecules here

https://brainly.com/question/19922822

#SPJ4

A student wants to design an experiment to study the transformation of mechanical energy, a slide can be used to investigate how gravitational potential energy transforms into kinetic energy.

The energy of motion, or kinetic energy, may be seen in the movement of an item or subatomic particle. Kinetic energy can be discovered in every moving object and particle. Kinetic energy is generated when anything moving, such as a person walking, a baseball rising through the air, a piece of food dropping from a table, or a charged particle in an electric field. The object's squared velocity determines the kinetic energy. As a result, an object's kinetic energy quadruples when its velocity doubles. Kinetic energy is divided into five kinds radiative, thermal, sound, electrically, and mechanic.

Kinetic energy of an object can be expressed in terms of its mass m and velocity v as:

K.E = 1/2 × m × v²

To know more about gravitational potential energy refer to:

https://brainly.com/question/15896499

#SPJ4

The complete question is as follows:

A student wants to design an experiment to study the transformation of mechanical energy. Which object can be used to investigate how gravitational potential energy transforms into kinetic energy?(1 point)

a spring

a flat race car track

a slide

a rug

The total travelled distance is • Speed, time and distance is one of the most common and important topics in the Mathematics or Quant section.

Velocity is the pace and direction of an object's movement, whereas speed is the time rate at which an object is travelling along a path. In other words, velocity is a vector, whereas speed is a scalar value.

For instance, 50 km/hr west denotes the velocity of a car whereas 50 km/hr (31 mph) denotes the speed at which it is moving down a route.

The average speed of an object is determined by dividing the distance traveled by the amount of time it takes the object to reach the distance.

Therefore, The total travelled distance is • Speed, time and distance is one of the most common and important topics in the Mathematics or Quant section.

To learn more about Speed, refer to the link:

https://brainly.com/question/28224010

#SPJ1

Torque is maximum in an induction motor when rotor resistance is equal to the rotor reactance.

Let us mathematically represent the equation of Torque of a three-phase induction motor:

T = [180/(2piNs)] [sV^2R2/(R2^2 + s^2X2^2)]

where Ns: Synchronous speed

V: Voltage of supply

R2: Rotor resistance

X2: Rotor reactance

From above formula, it can be concluded that induction motor torque varies with Slip and rotor resistance.

To get maximum torque, we apply the condition:

sm = Rm/Xm = 1

Therefore, Rm = Xm

where Rm: Motor Resistance/Phase

Xm: Motor Reactance/Phase

At the beginning of a three-phase slip ring induction motor where Nr = 0

Slip = 1

sm = Rm/Xm = 1

Xm = Rm

Therefore, maximum torque is when resistance and reactance of rotor are equal.

Learn more about Torque here:

https://brainly.com/question/1233416

#SPJ4

Increased exposure to diversity and job opportunities for people in developing countries. Through ethnographic fieldwork, anthropologists change not only the lives of those they are studying, but their own lives

Studying what makes humans human is called anthropology. In order to understand how early human populations lived and what was significant to them, archaeologists look back hundreds or even thousands of years in the past.

The history, evolution, and behavior of people are all topics that anthropologists and archaeologists research. In different parts of the world, they look at the cultures, languages, artifacts from archeological digs, and physical traits of the local population.

To know more about anthropologist visit:

https://brainly.com/question/18724362

#SPJ4

If 400 joules of work is done, 100 newtons force much have been applied

In order to calculate the force required to lift an object weighing 220 newtons to a height of 4 meters with a lever having an effort arm of 10 meters and a load arm of 2 meters, we must first determine the amount of work done.

Since 400 joules of work was done, we can use the formula Work = Force x Distance to calculate the force required.

In this case, the distance is 4 meters, so the equation becomes

400 = Force x 4.

By dividing 400 by 4 we can determine that the force required is 100 newtons.

Therefore, in order to lift the object weighing 220 newtons to a height of 4 meters with a lever having an effort arm of 10 meters and a load arm of 2 meters, 100 newtons of force must have been applied.

To learn more about force, click here:

https://brainly.com/question/13191643

#SPJ4

No, mass and size are two different physical quantities that do not have any direct relationship.

Mass is a scalar quantity that measures the amount of matter in an object and is independent of its location or motion. It is the total amount of matter in an object, and it doesn't change when the object is compressed or expanded.

Size, on the other hand, is a measure of how big an object is. It can be defined in terms of length, width, and height, and it can change if the object is compressed or expanded.

So, mass does not depend on size, and size does not depend on mass. They are independent physical quantities that are used to describe different aspects of an object. For example, the mass of an object determines its inertia and gravitational attraction, while the size of an object determines the amount of space it occupies.

Learn more about size:

https://brainly.com/question/19694949

#SPJ4

No, mass and acceleration are two different physical quantities that do not have any direct relationship.

Mass is a scalar quantity that measures the amount of matter in an object, and it is independent of its location or motion. It is the total amount of matter in an object, and it doesn't change when the object is accelerated or decelerated.

Acceleration, on the other hand, is a measure of how much the velocity of an object is changing over time. It can be defined as the rate of change of velocity. The acceleration of an object can change if the object is accelerating or decelerating, but it doesn't change the mass of the object.

So, mass does not depend on acceleration and acceleration does not depend on mass. They are independent physical quantities that are used to describe different aspects of an object. For example, the mass of an object determines its inertia, while acceleration determines how fast an object is changing its velocity.

Learn more about mass:

https://brainly.com/question/19694949

#SPJ4

ABC Co. should record a $30.000 foreign currency gain under IFRS for the fiscal year ended December 31, year 1.

Under IFRS, ABC Co. should record the foreign currency transaction at the exchange rate on the date of the transaction, and any subsequent changes in the exchange rate should be reflected in the profit or loss in the period in which they occur.

For the year ended December 31, year 1, ABC recorded a liability of $300,000 (€200,000 x 1.5) on November 1, year 1.

However, the liability decreased to $270,000 (€200,000 x 1.35) on December 31, year 1, resulting in a foreign currency gain of $30,000 for ABC Co.

Learn more about foreign exchange rate here: brainly.com/question/6675565

#SPJ4

When the student adds electrons through conduction to one of the objects, the magnitude of the electrical force between the two negatively charged objects will increase.

This is because the force between two charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. As the charge on one of the objects increases, the electrical force between the two objects will increase.

The magnitude of the gravitational force, however, will not be affected. The gravitational force is a force of attraction between two objects due to their masses. As electrons have a negligibly small mass, adding or removing electrons from an object will not affect the gravitational force between the two objects.

You can learn more about gravitational force at

https://brainly.com/question/13010127

#SPJ4

You drop an marker from your landing module's door after touching down on Mars and make note of it. The acceleration of the object on Mars  but on average is 3.72076 ms2, which is 38% of the acceleration on Earth.

Alternatively said, acceleration is really a vector. The vector's magnitude equals its length. The vector's direction determines its direction. As a result, the amplitude of the speed is the same as the acceleration vector's magnitude, and vice versa for the acceleration's direction.

Answer and justification The measure of acceleration is measured in meters / second squared. Acceleration involves both velocity and time, hence it's critical that the Both factors are reflected in units. Since velocity is indeed a vector, it possesses both a magnitude and a direction.

To know more about acceleration visit :

https://brainly.com/question/12550364

#SPJ4

One way organisms with similar niches reduce competition when they are found in the same ecosystem is by resource partitioning.

One example of resource partitioning is when two species of birds foraging together feed on different resources; one eats insects on tree trunks while the other eats insects in the outer branches.

Resource partitioning, which helps prevent rivalry in an ecological niche, is the division of scarce resources among species.

Two similar species employ mostly non-overlapping resources as a result of this type of evolution, and as a result, they occupy different niches. Because there is less direct rivalry between the species as a result of this resource partitioning, the species can coexist.

Learn more about resource partitioning at: https://brainly.com/question/23736575

#SPJ1

Phyla in increaing order of evolution is Platyhelminthes, Annelidia, Arthopoda and Echinidermata.

What is meant by Annelidia?

To learn more about  Annelidia refer to

https://brainly.com/question/15901162

#SPJ4

The accompanying figure makes it evident that wave (a) has the shortest wavelength, or the shortest distance between two crests or troughs. A will therefore have the highest frequency of all waves.

To learn more about frequency refer to:

https://brainly.com/question/254161

#SPJ4

The load of the pickup truck spills due to an unbalanced force acting on it caused by the collision from the car.

Newton's first law states that an object at rest will remain at rest unless acted upon by an unbalanced force. In this scenario, the load of the pickup truck is at rest in the back of the truck, but when the car rear-ends the pickup truck, it applies an unbalanced force on the load, causing it to spill out of the truck.

Newton's second law states that the force applied on an object is equal to the mass of the object multiplied by its acceleration. In this scenario, the car applies a force on the load of the pickup truck, which is equal to the mass of the load multiplied by the acceleration of the car at the time of the collision. The force causes the load to spill out of the truck.

Newton's third law states that for every action, there is an equal and opposite reaction. In this scenario, when the car rear-ends the pickup truck, the car experiences an equal and opposite force, which is the reaction to the force it applies to the load of the pickup truck.

In summary, the load of the pickup truck spills due to an unbalanced force acting on it caused by the collision from the car. The force applied on the load of the pickup truck is equal to the mass of the load multiplied by the acceleration of the car at the time of the collision. And the car experiences an equal and opposite force, which is the reaction to the force it applies to the load of the pickup truck.

Learn More About Newton's Law,

https://brainly.com/question/14222453

The force that is acting on the block is 19.l6 N

We have to know that the weight of the object is a force that is acting along the rope that is pulling the object. We must be able to note that the tension is the force that is acting along the rope that is pulling the object.

Now the weight of the steel block is going to act as a force of tension on the rope that is pulling the block.

We now have to know that the force is obtained from;

Force = mg

m = mass

g = acceleration due to gravity

F = 2 Kg * 9.8 m/s^2

= 19.6 N

Learn more about force:https://brainly.com/question/13191643

#SPJ1