Answer:
The key to understanding why ionic and covalent compounds have different properties from each other is understanding what's going on with the electrons in a compound. Ionic bonds form when atoms have different electronegativity values from each other. When the electronegativity values are comparable, covalent bonds form.
But, what does this mean? Electronegativity is a measure of how easily an atom attracts bonding electrons. If two atoms attract electrons more or less equally, they share the electrons. Sharing electrons results in less polarity or inequality of charge distribution. In contrast, if one atom attracts bonding electrons more strongly than the other, the bond is polar.
Ionic compounds dissolve in polar solvents (like water), stack neatly on each other to form crystals, and require a lot of energy for their chemical bonds to break. Covalent compounds can be either polar or nonpolar, but they contain weaker bonds than ionic compounds because they are sharing electrons. So, their melting and boiling points are lower and they are softer.
I hope this helps have a great day :)
Write the balanced molecular chemical equation for the reaction in aqueous solution for ammonium sulfate and iron(II) chloride. If no reaction occurs, simply write only NR. ☐⁴⁻ ☐³⁻ ☐²⁻ ☐⁻ ☐⁺ ☐²⁺ ☐³⁺ ☐⁴⁺ 1 2 3 4 5 6 7 8 9 0 ☐₁ ☐₂ ☐₃ ☐₄ ☐₅ ☐₆ ☐₇ ☐₈ ☐₉ ☐₀ + ( ) → ⇌ (s) (l) (g) (aq) Ir N Fe O Am Cl NR S H Ch Reset
The balanced molecular chemical equation for the reaction is (NH4)2SO4(aq) + FeCl2(aq) -------> FeSO4(aq) + 2NH4Cl(aq).
The rule for writing a balanced chemical reaction equation is that the number of atom of each element on the right hand side must be the same as the number of atoms of the same element on the left hand side of the reaction equation. This is achieved by performing an atom count.
The balanced molecular chemical equation for the reaction in aqueous solution for ammonium sulfate and iron(II) chloride is;
(NH4)2SO4(aq) + FeCl2(aq) -------> FeSO4(aq) + 2NH4Cl(aq)
Learn more: https://brainly.com/question/6505878
In experiment 9, in one operation, we heat up the alcohol with acid and do a concurrent distillation. What was the purpose of doing this
Answer:
we heat up because the component with lower boiling evaporates first,
leaving the other behind
Find five household items that contain ionic compounds. List the following information for each compound: a.name of the product
b. the chemical name of the ionic compound
d.the chemical formula of the ionic compound c. identify the ions present in each compound
Answer:
D . GOD BLESS .
Explanation:
How could you tell if a substance has undergone a physical change or a chemical one?
Answer: Chemical changes occur when a substance combines with another to form a new substance, called chemical synthesis or, alternatively, chemical decomposition into two or more different substances. These processes are called chemical reactions and, in general, are not reversible except by further chemical reactions.
A physical change is are changes affecting the form of a chemical substance, but not its chemical composition. Physical changes are used to separate mixtures into their component compounds, but can not usually be used to separate compounds into chemical elements or simpler compounds.
how many moles are there in 3.25x10^20 particles of lead oxide
Answer:
5.39 X 10-4
Explanation:
Try Checking It Out If It Right Or Not
GIVING BRAINLY AND 20 POINTS
A sound wave in air has the wavelength of 1.36 m. Calculate its frequency? Assume the speed is 340 m/s.
Explanation:
frequency= velocity/ wavelength
= 340/1.36
=250
4.What volume of hydrogen gas at STP is produced when 2.5 grams of zinc react with an
excess of hydrochloric acid?
Answer:
0.86
Explanation:
1mol of Zn has mass of 65.39g.The amount of Zn is 2.5g65.39g/mol=0.038mol.
The amount of H2 produced is the same as the amount of Zn consumed (0.038mol).
1mol of ideal gas will occupy 22.4L at STP.
The H2 will occupy 0.038mol×22.4L/mol=0.86L
.
Which choice is an element? Question 2 options: air (N2 mixed with O2 , and CO2 ) sodium chloride (NaCl) oxygen (O2 ) water (H2O )
Answer:
oxygen (O2 )
Explanation:
1 year = 365 days
1 day = 24 hours
How many years is 1,000,000 hours?
Has to be dimensional analysis
No one helps me please find an answer to my recent question in chemistry...please!!!
oh so sad for ur msg
if i were science student then absolutely i will help
but i am। computer science student in management faculty so so sry
Explanation:
your answer to the chemistry question is given !
hope that helps you.
why does a Costal area have less variation in temperature
Answer:
*The coastal areas experience less variation in temperature as compared to land. ... It means that water takes more time to get hot or cold then land. Therefore areas near sea or ocean have more moderate temperature in the day time and less cooler at night
Explanation:
4. Use the atomic model to answer the following questions
A. How many protons?
B. How many neutrons?
C. What is the name of this atom?
Answer:
´protons: 16
neutrons: 16
name: sulfur
Explanation:
What is the charge on ion X for Li2 X
an alloy composed of tin, lead, and cadmium is analyzed. the mole ratio of sn:pb is 2.73:1.00, and the mass ratio of pb:cd is 1.78:1.00. what is the mass percent composition of pb in the alloy
This problem is describe the mole-ratio composition of an allow composed by tin, lead and cadmium. Ratios are given as Sn:Pb 2.73:1.00 and Pb:Cd is 1.78:1.00, and we are asked to calculate the mass percent compositon of Pb in the allow.
In this case, according to the given information, it turns out possible realize that the following number of moles are present in the alloy, according to the aforementioned ratios:
[tex]2.73mol Sn\\\\1.00molPb\\\\\frac{1.00molPb*1.00molCd}{1.78molPb}= 0.562molCd[/tex]
Next, we calculate the masses by using each metal's atomic mass:
[tex]m_{Sn}=2.73mol*\frac{118.7g}{1mol}=324.05g\\\\ m_{Pb}=1.00mol*\frac{207.2g}{1mol}=207.2g\\\\m_{Cd}=0.562mol*\frac{112.4g}{1mol}=63.2g[/tex]
Thus, the mass percent composition of each metal is shown below:
[tex]\%Sn=\frac{324.05g}{324.05g+207.2g+63.2g} *100\%=54.5\%\\\\\%Pb=\frac{207.2g}{324.05g+207.2g+63.2g} *100\%=34.9\%\\\\\%Cd=\frac{63.2}{324.05g+207.2g+63.2g} *100\%=10.6\%[/tex]
So that of lead is 34.9 %.
https://brainly.com/question/19168996https://brainly.com/question/2578569Learn more:
Mechanical waves travel fastest through
A -Solid
B -Liquid
C -Gas
D -Vacuum
Answer:
A-Solid
Explanation:
Waves travel faster in solids & slowest in gases
Select the container from the figure (Figure 1) that represents the dilution of a 4 % (m/v) KCl solution to each of the following: Figure1 of 1 There is a diagram showing several containers. One container is filled with 4 percent of mass to volume solution of NaCl. Container 1 is filled with a solution in which volume is two times less than the volume of NaCl solution. Container 2 is filled with a solution of a volume two times larger compared to the NaCl solution. Container 3 is filled with a solution of a volume two times larger than the volume of the solution in container 2. Part A 2 % (m/v) KCl
From the dilution formula, we have that at constant value of the solute, the volume of the solution is inversely proportional to the concentration.
The correct responses are;
Part A: Container 2Part B: Container 3Reasons:
The given parameters are;
The concentration of the KCl solution = 4% m/v
Taking the solution as solution of KCl
The volume of the solution in container 1 = Two times less than the volume of KCl solution.
[tex]V_{container \, 1} = \displaystyle \mathbf{ \frac{1}{2} \cdot V_{4\% \, solution}}[/tex]
The volume of the solution in container 2 = Two times larger compared to the volume of KCl solution.
[tex]V_{container \, 2} = \mathbf{\displaystyle 2 \times V_{4\% \, solution}}[/tex]
The volume of the solution in container 3 = Two times larger than the container two solution volume.
[tex]V_{container \, 3} = \displaystyle \mathbf{ 2 \times V_{container \, 2}}[/tex]
Therefore;
[tex]V_{container \, 3} = \displaystyle 2 \times 2 \times V_{4\% \, solution} = \mathbf{4 \times V_{4\% \, solution }}[/tex]
Part A Required:
a. To select the container that represent the dilution of the 4% solution to 2%
Solution:
The dilution formula is; C₁·V₁ = C₂·V₂
Therefore;
[tex]\displaystyle V_1 = \mathbf{\frac{C_1 \cdot V_1}{C_2}}[/tex]
C₁ =4%, C₂ = 2%, we get;
[tex]\displaystyle V_1 = \frac{4 \cdot V_1}{2} = 2 \cdot V_1[/tex]
The volume of the container that represents a 2% dilution is container 2
which is filled with a solution of a volume two times larger compared to the
KCl solution.
Part B:
Required:
The container diluted to a 1% m/v KCl solution.
Solution;
Using the dilution formula, we have;
C₁ = 4%, C₂ = 1%
Therefore;
[tex]\displaystyle V_1 = \frac{C_1 \cdot V_1}{C_2}[/tex]
[tex]\displaystyle V_1 = \frac{4 \cdot V_1}{1} = \mathbf{4 \cdot V_1}[/tex]
The volume of the solution is four times the volume of the 4% KCl solution, which is equivalent to the volume in container 3.
Possible parts of the question are;
Select the container that represents the dilution of the 4% (m/v) KCl solution to obtain the solutions that follows;
Part A: a 2% (m/v) KCl solution
Part B: a solution that is a 1% (m/v) KCl solution
Please see attached drawings
Learn more here:
https://brainly.com/question/11493179
pls help 8th grade k12
Hot air balloons are open at their lower and end. A basket is suspended from the balloon and can take several passengers as well as the pilot. A propane burner fixed to the basket is used to heat up the air in the balloon A hot balloon has a volume of 1500 m3 and its volume does not change when the enclosed air is heated.
1) Use the ideal gas equation, pV=nRT. to calculate how many molecules of the balloon contains at a temperature of 10 °C and a pressure 10.1 KP.
2) Calculate the mass of air it contains, assuming an average M of 29.
(a) The number of molecules contained by the balloon at the given condition is 6,438.97 moles.
(b) The mass of air in the balloon is 186.73 kg.
The given parameters;
volume of the balloon, V = 1500 m³temperature, T = 10⁰C = 273 + 10 = 283 Kpressure, = P = 10.1 kPa = 10,100 PaThe number of molecules contained by the balloon at the given condition is calculated as follows;
[tex]PV = nRT[/tex]
where;
R is ideal gas constant = 8.314 J/mol.Kn is the number of moles air in the balloon;[tex]n = \frac{PV}{RT} \\\\n = \frac{10,100 \times 1500}{8.314 \times 283} \\\\n = 6,438.97 \ moles[/tex]
The mass of air in the balloon is calculated as;
[tex]n = \frac{m}{M} \\\\m = nM\\\\m = 6,438.97\ moles \ \times \ 29 \ g/mol\\\\m = 186.73 \ kg[/tex]
Learn more here:https://brainly.com/question/13248885
What would the empirical formula be for the molecular compound CoH904?
Did cellular respiration occur in trial 3 with the yeast and sugar?
PLEASE HELP ITS DO RIGHT NOWW
Answer:
In summary, yeast is a single-celled fungus that uses cellular respiration, which converts glucose and oxygen into carbon dioxide and ATP. ... Aerobic respiration makes the most ATP, between 36 and 38. Fermentation is anaerobic respiration and happens without oxygen.
Explain why caesium is more reactive than sodium.
You should answer in terms of electrons.
The table shows the order of the Sun and some of the planets in our solar system.
The letters represent the Earth, Neptune and the Sun, so match them up in your answer.
Explanation:
A=Sun
B=Earth
C=Neptune.
hope my answer will definitely help you out.
Find the mass of 1.220 moles of PH5.
Answer:
43.93642
Explanation:
Phosphorus P 30.973762 1 86.0061
Hydrogen H 1.00794 5 13.9939
I don't know physics, but I hope this helps :)
(I'm a seventh grader so don't judge if this is wrong please)
7. What's the structure of methane, CH,? Is it polar or non-polar?
O A. Trigonal planar, polar
O B. Tetrahedral, polar
O C. Trigonal planar, non-polar
O D. Tetrahedral, non-polar
Answer:
The answer is D.
Explanation:
Methane (CH4) is a non-polar hydrocarbon molecule made of a single carbon atom and four hydrogen atoms. It is found in nature in the form of natural gas. It is non-polar because the difference in electronegativities between carbon and hydrogen is not sufficient to produce a polarized chemical connection between these two elements.
The methane molecule has a tetrahedral structure in terms of molecular geometry. Because the molecule is not planar, the angles between the H-C-H bonds are 109.5°, which is more than the 90° that they would be if the molecule were planar.
Explanation:
tetrahedral, non polar
how is atom and molecules related to our sense of smell?
Answer:
Atoms themselves do not have a smell. Molecules do.
Explanation:
What happens is that particular molecules bind to receptors in our nose, activating nerves, that then send signals to our brain, which we then interpret and perceive as “smells”. Different molecules bind to different receptors, which is why we can perceive a number of different smells
22. Which of the following molecules or ions contain polar bonds?
(a) O3
(b) S8
(c) 02 2-
(d) NO3
(e) CO2
(f) H2S
(g) BH4-
Answer:
D NO3 Nitrate is a nitrogen oxoanion formed by loss of a proton from nitric acid.
Which of the following types of models is generally used to predict long-term events? a. idea model b. physical model c. computer model d. none of the above Please select the best answer from the choices provided A B C D Mark this and return
Answer:
C
Computer model is generally used to predict long-term events
I hope it helps.
A mixture of methanol and water was distilled using both simple distillation and fractional distillation. Which statement is NOT true
With regard to distilling the mixture of methanol and water using simple
distillation and fractional distillation, a statement that can be made that is
not true is that; Methanol and water form an azeotrope.
Reasons:
Azeotrope are liquid mixtures that have the property of a constant boiling
point due to the contents of the vapor are the same as the mixture.
Water when mixed with methanol form network structures. However,
methanol does not form a binary azeotrope with water.
Therefore, a statement that is not true is that methanol and water form an
azeotrope a mixture that has a constant boiling temperature.
Learn more about azeotropes here:
https://brainly.com/question/13095223
A metal (FW 341.1 g/mol) crystallizes into a body-centered cubic unit cell and has a radius of 1.74 Angstrom. What is the density of this metal in g/cm3
This problem provides the molar mass and radius of a metal that has an BCC unit cell and the density is required.
Firstly, we consider the formula that relates molar mass and also includes the Avogadro's number and the volume of the unit cell:
[tex]\rho =\frac{Z*M}{V*N_A}[/tex]
Whereas Z stands for the number of atoms in the unit cell, M the molar mass, V the volume and NA the Avogadro's number. Next, since BCC is able to hold 2 atoms and M and NA are given, we calculate the volume of the atom in the unit cell given the radius in meters:
[tex]V=a^3=(\frac{4R}{\sqrt{3} } )^3=(\frac{4*1.74x10^{-10}m}{\sqrt{3} } )^3=6.49x10^{-29}m^3[/tex]
And finally the required density in g/cm³:
[tex]\rho =\frac{2*341.1g/mol}{6.49x10^{-29}m^3\frac{m^3}{atom} *6.022x10^{23}\frac{atom}{mol} } =17455257.8g/m^3\\\\\rho=17.5g/cm^3[/tex]
Learn more:
brainly.com/question/12977980 brainly.com/question/13110055
Hello, is there anyone here a pharmacy technician?
Explanation:
It can take up to two years to become a pharmacy technician, depending on the education program you choose. In fact, most pharmacy certification programs can be in a year, or less than eight months.
