In this problem, you will apply kinematic equations to a jumping flea. Take the magnitude of free-fall acceleration to be 9.80 m/s^2 . Ignore air resistance. A flea jumps straight up to a maximum height of 0.380 m. What is its initial velocity v0 as it leaves the ground?
How long is the flea in the air from the time it jumps to the time it hits the ground?

Answer: The answer is (D) [tex]v_{f} = 0[/tex]

Explanation: Here is a guide to the symbols that are presented in the options:

In option (A), it is Δx = 0, it is read as "del of x equals zero." Δx represents the change in the position of a particular object.

In option (B), it is [tex]v_{i}[/tex] = 0, here [tex]v[/tex] denotes the velocity of the object, and 'i' denotes the initial. So,  [tex]v_{i}[/tex] denotes the initial velocity of the object.

In option (C), it is a = a, and 'a' denotes the acceleration of the object.

In option (B), it is [tex]v_{f}[/tex] = 0, here [tex]v[/tex] denotes the velocity of the object, and 'f' denotes the final. So,  [tex]v_{f}[/tex] denotes the final velocity of the object.

The question asked about the meaning of "comes to a stop." When an object comes to a stop it means it has no or 0 velocity, which means the final velocity becomes 0. hence, option (D) is the correct answer.

To learn more about velocity and acceleration:

https://brainly.com/question/13639113

https://brainly.com/question/28743430

Answer:Therefore, the speed of the object that has 9000 J of kinetic energy and a mass of 35 kg is 22.68 m/s.

Explanation:

An object has 9000 J of kinetic energy and a mass of 35 kg. What is the object's speed?

Data:

Ec = kinetic energy = 9000 J

m = mass = 35 kg

V = speed = ?

The formula of potential energy;

Where

We clear for speed, substitute data and solve:

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{Ec=\frac{m*v^2}{2} \iff \ V=\sqrt{\frac{2*E_c}{m} } } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{V=\sqrt{\frac{2*9000 \ J}{35 \ kg} } } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{V=\sqrt{\frac{18000 \ J}{35 \ kg} } } \end{gathered}$}}[/tex]

Before continuing to answer, we work with the units, which in this case is Joules.

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{V=\sqrt{\frac{18000 \ N*m}{35 \ kg} } } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{V=\sqrt{\frac{18000 \ \not{kg}*\dfrac{m}{s^2} *m}{35 \not{kg}} } \iff V=\sqrt{\frac{1800 \ \dfrac{m}{s^2} *m}{35} } } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{V=\sqrt{\frac{18000 \ \dfrac{m^2}{s^2} }{35 \ } } } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{V=\sqrt{514.2857142857142857 \ \frac{m^2}{s^2} } } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{V=\sqrt{514.286 \ \frac{m^2}{s^2} } } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{V=22.6778746799606422=22.6778 \ m/s } \end{gathered}$}}[/tex]

[tex]\boxed{\large\displaystyle\text{$\begin{gathered}\sf \bf{V \approx22.68 \ m/s } \end{gathered}$}}[/tex]

Therefore, the speed of the object that has 9000 J of kinetic energy and a mass of 35 kg is 22.68 m/s.

Uranium contains almost 16,000 times as much energy per unit weight as coal, hence the statement that only 0.7% of uranium can fission with a single, low-energy neutron is true.

Does uranium possess a lot of energy?

An plentiful metal with a lot of energy is uranium: One ton of coal, 149 gallons of oil, or 17,000 cubic feet of natural gas are all equivalent in terms of energy production to one uranium fuel pellet.

Other than uranium, what has higher energy?

In a liquid fluoride thorium reactor, it is thought that one ton of thorium may generate as much energy as 35 tons of uranium. A well-functioning reprocessing reactor can use 99% of its thorium fuel, compared to conventional reactors that use less than 1% uranium.

To know more about neutron visit:

brainly.com/question/17038358

#SPJ4

The velocity of the block at 3.40 m from the top of the slope is 2.687 m/s.

Acceleration is the rate of change of velocity. Acceleration usually implies a change in velocity, but not always. If an object is moving in a circular orbit with constant velocity, it is still accelerating because the direction of its velocity is changing.

The acceleration of the block is m/s2

By the equation of motion,

With [tex]v^{2} -u^{2} =2as[/tex] and

3.82 = [tex]2*a*6.8[/tex]

=> 1a = 3.8²/6.8

Let v be the velocity 3.4 m from the vertex, then v2 = 2a3.4 = (3.8^2 /6.8)*3.4 = 3.8² /2

v = 3.8/√2 = 2.687

Velocity is 2.687 m/s. The velocity of the block at 3.40 m from the top of the slope is 2.687 m/s.

Learn more about Acceleration

brainly.com/question/28743430

#SPJ4

The initial energy was lost in collision of a 2350 kg shark moves upward toward a 195 kg fish that is at rest and swallows it whole = 95.33 Joules.

Perfectly inelastic collisions, in contrast to elastic collisions, conserve momentum but not energy. The kinetic energy carried by the moving objects is not always conserved, even though the system's overall energy is always constant. Energy lost to the environment and converted into other forms, such heat, during an inelastic collision.

To determine the energy lost in collision, use the equation:

E = ½ (m1m2) / (m1 + m2) x v²

Where:

m 1 = mass of the object 1

m 2 = mass of the object 2

v 1 = velocity /speed of the object 1

v 2 = velocity / speed of the object 2

v 1 = v2

Hence,

E = ½ (2350 x 195) / (2350 + 195)

= ½ (485250) / (2545)

= 95.33 Joules.

Learn more about kinetic energy here: https://brainly.com/question/30266486

#SPJ4

Newton's first law, also known as the law of inertia, states that an object at rest will remain at rest, and an object in motion will continue in motion with a constant velocity unless acted upon by an unbalanced force. In other words, it states that an object will remain in a state of constant velocity unless acted upon by a net external force.

Inertia, on the other hand, is the property of an object that resists a change in its state of motion. It is the tendency of an object to maintain its current state of motion (i.e. at rest or in motion) unless acted upon by an external force. Inertia is a fundamental concept in physics and is closely related to Newton's first law.

So in summary, Newton's first law is a statement about the behaviour of an object in motion and the relationship between force and motion, while inertia is a property of an object that describes its resistance to a change in motion.

Learn more about Laws of Inertia here: https://brainly.com/question/18128368

#SPJ4

Values of the Resistor Color, Code Calculation.

Values of the Resistor Color,  Code Calculation

As an example, a resistor has the corresponding colored marks; Yellow, violet, and red together equal 4 7 2 (4 7 x 102 = 4700 or 4k7 Ohm). The resistor's % tolerance is assessed using the fourth and fifth bands. Green, blue, red, and gold make up the 4 bands. Green represents the number five, and blue the number six, according to the color coding table.

first digit=green=5

Second digit=blue=6

3rd color=brown=multiplier=10

4th=gold=tolerance=5%

therefore,

R=56×10  with 5% tolerance

R=560Ω with 5% Tolerance

To learn more about Resistor Color  refer to:

https://brainly.com/question/28015426

#SPJ1

To calculate the magnitude of a two-dimensional vector from its coordinates, do the following: determine its constituents. Then find the sum of each of its components' squares. And take the square root of the resulting sum.

A vector's magnitude is equal to its length. The formula for determining the magnitude of a vector v = (x, y) in two dimensions is: |v| = √(x² + y²). The Pythagorean theorem is used to derive this formula.

The formula for determining the magnitude of a vector V = (x, y, z) in three dimensions is: |V| =√ (x² + y² + z²).

Learn more about vector here: https://brainly.com/question/30214996

#SPJ4

The object has mgh total energy. Its kinetic energy will be converted into potential energy as it descends. The kinetic energy is equal to 1/2*m*v^2, where v is the object's instantaneous velocity.

The potential energy would diminish as the object continued to fall, while the kinetic energy would rise. PE = KE with v = 4.6 m/sec Between the beginning point and the lowest point of the fall, the height is always the vertical distance (and not necessarily the entire distance the body may go).

Almost all mechanical processes involve the transfer of energy between its kinetic and potential forms as well as work. Potential energy is released into the environment as kinetic energy when elastic or other forces, among others, cause it to move.

Learn more about kinetic energy Visit: brainly.com/question/25959744

#SPJ4

Answer:

Reference Sound Intensity (Io) = 10^-12 W/m² the threshold of hearing at 1Khz and 0 dB when calculating sound intensity levels in decibels, resulting in the more practical range of 0 to 120 dB.

Explanation:

The student is producing an output power of 6.43 Watts over the 7 second duration.

Force is an influence that causes an object to change its motion, direction, shape, or other physical qualities. Forces can be caused by physical contact, or they can be created by fields like gravity and magnetism. Forces can also be internal, such as the forces of friction, tension, and compression.

The power output by the student can be calculated using the equation Power = Force x Distance/Time. In this case, the power output is equal to 19 x 5 / 7 = 6.43 Watts. This means that the student is producing an output power of 6.43 Watts over the 7 second duration.

To know more about force click-
https://brainly.com/question/12785175
#SPJ4

One example of Newton's third law is when a person pushes against a wall.

The person exerts a force on the wall, and the wall exerts an equal and opposite force back on the person. Another example is when a baseball is hit with a bat.

The bat exerts a force on the baseball, causing it to move forward, and the baseball exerts an equal and opposite force back on the bat, causing it to move in the opposite direction.

The same applies to the action of a rocket taking off from the ground. The rocket exerts a force on the exhaust gases, pushing them out the back of the rocket and causing the rocket to move forward, and the exhaust gases exert an equal and opposite force back on the rocket, propelling it upward.

To learn more about Newton's 3rd law at

https://brainly.com/question/14967902?referrer=searchResults

#SPJ4

1 kg-wt is equal to 9.8 Newton. It is vector quantity which has magnitude as well as direction.

The weight of an object is nothing but the gravitational force exerted by the earth on the object. Since it is a force and it is defined as the product of mass and acceleration due to gravity. And we know that the value of acceleration due to gravity is 9.8 m/s². Although it slightly changes place to place, but we take its average value 9.8 m/s².

Force = Mass × Acceleration

Force = 1 kg × 9.81 m/s²

1 kg-wt = 9.81 N

The SI unit of force is Newton.

To know more about vector quantity, here

https://brainly.com/question/8473644

#SPJ4

The upper test of 0.0414 is the p-value obtained from this test statistic.

P1P1 = P2P2

The above is the null hypothesis

The two-sided alternative hypothesis is:

P1P1 [tex]\neq[/tex] P2P2

"\=/" stands for "not equal".

Use the Z-Table or Z-Calculator to derive the p-value (probability value) for a Z-score of 2.04.

In the upper test,

2 × [probability z>2.04] = 2[0.0207] = 0.0414

This is the p-value for the test statistic.

The focus is on the alternative hypothesis.

So, final answer is that the upper test of 0.0414 is the p-value obtained from this test statistic.

Learn more about hypothesis

brainly.com/question/896413

#SPJ4

The first law of Newton, sometimes referred to as the law of inertia, holds that unless an external force acts upon an item, it will continue to be at rest or move at a constant speed.

The first law of Newton, sometimes referred to as the law of inertia, holds that unless an external force acts upon an item, it will continue to be at rest or move at a constant speed.

This implies that an object will continue to move in its existing manner in the absence of any external pressures. In other words, unless a net acts on it, an item in motion will continue to travel in a straight path at a constant speed.

To learn more about newton's 1st law at

https://brainly.com/question/27573481?referrer=searchResults

#SPJ4

A counterclockwise spin in figure skating is known as a "backspin" or "backward spin."

It isn't always special whether the figure skater is capable of keep control for the duration of the spin. It'd depend upon the skater's skill stage and the precise conditions of the spin. Factors inclusive of the skater's balance, pace, and technique can all play a function in figuring out if they're able to keep manage. Moreover, the surface of the ice and any distractions within the environment might also affect the skater's ability to maintain manipulate. Average, the capacity to keep manipulate in the course of a spin can range significantly depending at the individual skater and the unique situations of the spin.

To know more about Unique Situations visit: https://brainly.com/question/28536415

#SPJ1

Acid rain is the result of pollutants being released into the air

Acid rain is defined as rain or any other type of precipitation that is unusually acidic, which means it contains a lot of hydrogen ions. Acid rain has a pH level that is lower than this and typically ranges from 4-5. Most water, including drinking water, has a neutral pH that exists between 6.5 and 8.5.

When gases like sulphur dioxide and nitrogen oxides are released into the atmosphere, a chemical reaction takes place that eventually results in acid rain. These substances have the capacity to ascend to extremely high altitudes in the atmosphere, where they combine and interact with oxygen, water, and other chemicals to create acid rain, a type of ozone-depleting haze.

Learn more about Acid rain here:

https://brainly.com/question/22143130

#SPJ4

The distance between the pivoting force and the resisting force is 1.2. Resistance is the capacity of a substance to block the movement of electrical current.

Resistance measures how easily energy will flow throughout a circuit by using the ohm () as the unit. Current increases when resistance decreases, and decreases when resistance increases. Resistance is important to ensure that water flows through circuits at the correct rate.

As resistance rises, the amount of current that flows diminishes. One of the causes, if abnormally high, could be conductivity damage from corrosion burning. Since all semiconductors emit some heat, temperature rise is a frequent issue connected to resistance.

15*4 = 50x

60 = 50x

1.2 = x

To know more about resistance visit:

https://brainly.com/question/11431009

#SPJ4

The magnitude of the vector 6i-2j +3k is

A vector's length determines its magnitude. It is also known as the vector's absolute value or its absolute modulus. The Pythagorean theorem is used to determine a vector's magnitude.

The length of a given vector, let's say v, is determined using the magnitude of a vector formula, which is indicated as |v|. In essence, this amount represents the distance between the vector's beginning point and ending point. The vector's length is its magnitude, and its direction is the direction it is pointing.

With just a few straightforward steps, it is simple to calculate a vector's magnitude. Finding the cross product, the angle between two vectors, and adding and subtracting vectors are further crucial vector operations.

[tex]= \sqrt{a^{2}+b^{2}+c^{2} } \\\\= \sqrt{6^{2}+2^{2}+3^{2} } \\\\\\= \sqrt{36+4+9 } \\\\\\= \sqrt{49 }[/tex]

= 7

Learn more about magnitude Visit: brainly.com/question/3184914

#SPJ4

Correct Question:

What is the magnitude of the vector 6i-2j +3k?.

Cosmic microwave background radiation (CMB) was discovered by American physicists Arno Penzias and Robert Wilson in 1964.

To lean more about radiation refer:

brainly.com/question/893656

#SPJ4

No, mass and speed are two different physical quantities that do not have any direct relationship.

Mass is a scalar quantity that measures the amount of matter in an object, it is independent of its location or motion and it is constant. It is the same whether an object is at rest or in motion.

Speed, on the other hand, is a measure of how fast an object is moving. It is the distance an object travels in a certain amount of time and it can change. For example, an object can be moving at a high speed or at a low speed.

In the theory of special relativity, mass and energy are closely related and, as a result, the mass of an object increases as it approaches the speed of light. But this is only for objects that are moving at a velocity close to the speed of light, but for everyday objects, mass does not depend on speed.

So, the mass of an object does not change with its speed, but the energy of an object does increase as its speed increases.

Learn more about mass:

https://brainly.com/question/19694949

#SPJ4

The names of the alphabets in the Scientific Method Review include:

HOMER is an acronym that is meant to encompass the various steps that one should take when they are engaged in Scientific Method Review. This first is to come up with a hypothesis.

The second is to operationalize this hypothesis to test it for viability. Then there is a need to measure this research and then eveluate results. Finally, one should replicate the test, revise the results, and then report.

Find out more on the Scientific Method Review at https://brainly.com/question/14329481

#SPJ1

To calculate the water pressure that acts on the hull of the boat, we can use the equation:

Pressure = Force / Area

The force acting on the hull is the buoyant force, which is equal to the weight of the water displaced by the boat. Since the boat is floating, the weight of the water displaced is equal to the weight of the boat. Therefore:

Force = Weight of boat = 20,000 N

The area of the hull that is in contact with the water is 4 m2

Therefore, the water pressure acting on the hull of the boat is:

Pressure = Force / Area = 20,000 N / 4 m2 = 5000 N/m^2

The pressure unit is Newtons per square meter (N/m^2) also known as Pascals (Pa).

It's important to note that the weight of the boat and the water displaced are in Newtons and the area of the hull is in square meter, that's why the pressure is in N/m^2.

By transferring compute tasks to local devices, such as smartphones and laptops, rather than the cloud, edge computing minimises latency for end users.

With edge computing, customers may leverage their devices as a reliable computational resource at scale in addition to increasing agility and cost-effectiveness. Here are some ways that edge computing has made it such that consumers experience less latency.

There are several brand-new difficulties facing organisations in the era of big data. One significant obstacle is latency. Companies must analyse data more quickly as they gather more of it and store it in their systems. They must thus keep more data nearby their users. You may act more quickly the closer the data is. Making data more accessible to people through computers is one way businesses may reduce latency.

Learn more about Latency here:

https://brainly.com/question/14264521

#SPJ4

Gravity depends on mass, not on size or density.

Gravity is a force of attraction between two objects that have mass. The force of gravity is proportional to the product of the two masses and inversely proportional to the square of the distance between them. Therefore, the more massive an object is, the stronger the gravitational force it exerts.

Size and density are not directly related to gravity. Size is a measure of how big an object is, and density is a measure of how much mass is contained in a given volume. They do not affect the strength of the gravitational force. An object's size or density may affect the gravitational force acting on it, but only through their effect on the object's mass.

So, gravity depends on mass, but not on size or density. The gravitational force exerted by an object is proportional to its mass, regardless of its size or density.

Learn more about Gravity:

https://brainly.com/question/14874038

#SPJ4

miles per minute, or the speed at which light Light moves at a fixed, constant pace of 186,000 miles per second.

The conversion factor carries no uncertainty, hence the significant number of numbers in our response is unaffected. The amount of significant figures will, however, affect our calculation when using actual measurements.

A Metric Conversion Chart  The metric transformation chart is a table that shows all the basic units and how they are converted. The primary bases for these basic metric units are length, volume, space, weight, temperature, and area.

To know more about speed visit :

https://brainly.com/question/28224010

#SPJ4

Answer: 1.118x10 7

Explanation: To find the speed of light in units of miles per minute, we must use the fact that 60min=1hr.

6.706×108mihr×1hr60min=1.118×107mimin

Therefore, we find that the speed of light is approximately 1.118×107 miles per minute.

The speed v οf the ball when it leaves the track is 5.603 m/s.

The term "acceleration" refers tο gradual changes in direction and speed. A change in the speed οr direction of an object or point moving forward is referred to as acceleration.

Acceleration is the term used in physics tο describe the rate at which an object's velocity changes οver time. The acceleration of a body is the result of all the reaction forces acting οn it, according to Newton's second law of motion. The unit of acceleration derived from Si is the metre per square secοnd (m/s²).

Cοnservation of energy is

[tex]\mathrm{mg(\Delta h) = \dfrac{1}{2} mv^2 }[/tex]

[tex]\mathrm{ v = \sqrt{2g(\Delta h)} }[/tex]

[tex]\mathrm{ v = \sqrt{2 \times 9.81(4 - 2.4)} }[/tex]

v = 5.603 m/s

Thus, The speed v οf the ball when it leaves the track is 5.603 m/s.

To learn mοre about acceleration, visit

brainly.com/question/12550364

#SPJ4

Complete question:

It will take 5x105 seconds to get to this pace.

Speed refers to the rate at which a length varies over time. It has a time-distance dimension. The outcome is the High silica element of speed, which combines the fundamental time units and the fundamental measure of length. As a result, the SI unit for velocity is the metre per second, or m per s.

Velocity is the term for the rate of movement. The measurement of a velocity shift called acceleration. Given that it includes both magnitude and direction, it is a vector quantity. Due to the fact that it determines how quickly velocity changes, acceleration is just a vector quantity.

To know more about Speed visit:

https://brainly.com/question/28224010

#SPJ1

If a ball i thrown horizontally from the roof of a building 55 m tall with a speed of 3. 8 m/ so the ball will land 55 m away from the building.

Speed is the rate at which something moves or occurs. It is usually measured in terms of distance over time. Speed can be expressed in many different forms, including miles per hour (mph), kilometers per hour (kph), meters per second (m/s) and even in terms of the speed of light. Speed is a measure of how quickly something moves in a specific direction.

The ball will land 55 m away from the building. This is because the horizontal velocity of the ball is 3.8 m/s, and the time it takes to travel 55 m is 55/3.8 = 14.47 seconds. Since the ball was thrown horizontally, it will travel a horizontal distance equal to the time it took multiplied by the velocity, which is 14.47 * 3.8 = 55 m.

To learn more about speed

https://brainly.com/question/13943409

Using the CDN, the latency can be reduced as much as possible.

Using CDNs, the distance between the client making the request and the server responding to that request plays an important role. A CDN (Content Delivery Network) allows you to bring your resources closer to your users by caching them in multiple locations around the world. Network administrators have many tools to choose from for this, including Ping, Traceroute, and My Traceroute (MTR) which will cause the latency to reduce. Another thing this movie has in common with the quest for zero-latency monitoring is that both are myths. "Zero Latency" is just a marketing slogan someone came up with to get you to buy an audio interface.

Learn more about the latency in

https://brainly.com/question/29497697

#SPJ4