plz help will mark brainliest ​

Plz Help Will Mark Brainliest

Answers

Answer 1

Explanation:

The rod can be in equilibrium only if the resultant force is 0 and the moment around any point of the rod must be equal to 0.

We have to take moments around the pivoted point.

Moment = Force × Perpendicular distance to the force

For the rod to be in equilibrium,

Clockwise moment - Anticlockwise moment = 0

Clockwise moment = Anticlockwise moment

The distance between pivoted point and the weight of rod = 50 cm - 30 cm = 20 cm

So 20 cm× 1.2 N produces a Clockwise moment

If Perpendicular distance between pivoted point and 2N load is x,

Anticlockwise moment = x × 2N

20 cm× 1.2N = 2N × x

x = 12 cm

So 2 N load is at 12 from the pivoted point.

From the left edge of the meter ruler, 2N load is at 30-12 cm distance

= 18 cm

Answer 2

Answer: 18 cm

Explanation:


Related Questions

Which object is moving faster?
A

Answers

Answer:

A

Explanation:

Answer:

A

Explanation:

Football players boots have spikes at their sole

Give reason​

Answers

Answer:

it prevents slipping on the grass while playing

Answer:

to keep their grip on the ground so they won't fall

someone throws a rubber ball vertically upward from the roof of a building 8.2m in height. the ball rises, then falls.it just misses the edge of the roof, and strikes the ground.if the ball is in the air for 6.2s, what was its initial velocity?(disregard air resistance. a=-g=-10m/s²

Answers

Answer:

H = V t - 1/2 g t^2         V and g are in different directions

-8.2 = V * 6.2 - 1/2 * 10 * 6.2*2 = 6.2 V - 192.2

V = 184 / 6.2 = 29.7 m/s

Check: find time for ball to return to zero height

0 = 29.7 T - 5 T^2

T = 29.7 / 5 = 5.94 sec

The ball must have fallen 8.2 m in (6.2 - 5.94) sec = .26 sec

S = 29.7 * .26 + 5 * .26^2 = 8.1

Historia de baloncesto internacional resumen

Answers

Answer:

?

Explanation:

Which is the force that results from use of a machine?
O a. input force
Oc. input work
Ob. output force
Od. output work

Answers

Answer:

D. Output force

Explanation:

The input force is the effort used to run the machine and this results in an output force.

In an exothermic reaction, energy is

the surroundings.


In an endothermic reaction, energy is

the surroundings.

Answers

In Exothermic reaction energy is Thrown/Relased to the surroundings.In endothermic reaction, energy is absorbed from the surroundings.

Trick to identify:-

Exothermic reaction has +∆H sign on product sideEndothermic reaction has -∆H sign on product side or +∆H sign on reactant side

Answer:

In an exothermic reaction, energy is

✔ released to

 the surroundings.

In an endothermic reaction, energy is

✔ absorbed from

 the surroundings.

Explanation:

Mxcbccbhf chucklingbdbfbfndbfnf

Answers

Answer:

4 seconds

Explanation:

On the Y axis - you go to 12. Go directly horizontally till you hit the line. Then go directly down. If you do this correctly, you should hit 4 seconds on the X axis.

definiciones de estrés

Answers

Answer:

dame la marca más inteligente, por favor

Explanation:

En el campo de la medicina, es la respuesta del cuerpo a una presión física, mental o emocional. El estrés produce cambios químicos que elevan la presión arterial, la frecuencia cardíaca y las concentraciones de azúcar en la sangre. También suele producir sentimientos de frustración, ansiedad, enojo o depresión.

Answer:

El estrés es la reacción del cuerpo al sentirse amenazado o bajo presión.

Explanation:

which statement about moist air moving over a mountain is correct?

Answers

Answer:

Explanation:

The orographic effect occurs when air masses are forced to flow over high topography. As air rises over mountains, it cools and water vapor condenses. As a result, it is common for rain to be concentrated on the windward side of mountains, and for rainfall to increase with elevation in the direction of storm tracks.

Help ! will give Brainliest to who Answer first.

Acceleration is a ______ quantity.

Answers

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

The Correct statement is ~

Acceleration is a vector quantity.

Answer:

Acceleration is a vector quantity.

if the magntidude of the sum and difference of two non zero vectors A and B is equal. what can we say about the two vectors ​

Answers

Answer:

A + B = B - A

The above equation must hold for the sum and difference to be zero.

How can one of the vectors not be zero?????

If larger-diameter tires are mounted on the car instead, how will that affect the speedometer reading? The speedometer

Answers

Answer:

A speedometer is related to the number of complete revolutions.

A larger diameter tire will travel farther in one revolution.

N D = S    where N is the number of revolutions and S the distance traveled

N = S / D     so the speedometer will record less revolutions and less distance traveled if the diameter is increased and the distance traveled will be too small as compared to the actual distance traveled.

What type of machine is used to measure the location of an earthquake epicenter.

Answers

Answer:

Seismometer

Explanation:

Seismometer measures Earth quake epicenter while seismograph measures Earth quake size

when light enters water, it bends. what does the amount of bending depend on?

Answers

Answer:

the change of speed!

Explanation:

if light speeds up or slow down more it bend more

What is the anomalous expansivity of water

Answers

Answer:

The anomalous expansion of water is an abnormal property of water whereby it expands instead of contracting when the temperature goes from 4°C to 0°C, and it becomes less dense. The density becomes less and less as it freezes because molecules of water normally form open crystal structures when in solid form.

How does the diameter of a black hole (size of the event horizon) depend on the mass inside the black hole

Answers

Answer:

The greater the mass, the greater is the diameter

Explanation:

The greater the mass, the greater is the diameter. almost all galaxies contain supermassive black holes.

A ball is thrown from ground level at an angle of 0 and the initial velocity components are 7.5m/s and 13m/s. Ignoring air resistance, calculate each of:

1- The initial velocity is vi

2- The value of the angle at which the ball was thrown

3 - The horizontal range of the ball R​

Answers

I assume you mean an angle of θ, and not 0. I also assume the given components of the initial velocity are horizontal and vertical, respectively, so that

1. the initial velocity vector is

[tex]\boxed{\vec v_i = (7.5\,\vec\imath + 13\,\vec\jmath) \dfrac{\rm m}{\rm s}}[/tex]

which means the ball is thrown with an initial speed of

√((7.5 m/s)² + (13 m/s)²) ≈ 15 m/s,

and

2. the angle made by [tex]\vec v_i[/tex] with the positive horizontal axis is θ such that

[tex]\tan(\theta) = \dfrac{13}{7.5} \implies \theta \approx \arctan(1.7) \approx \boxed{60^\circ}[/tex]

3. At time t, the ball attains a height y and horizontal range x according to

y = (13 m/s) t - g/2 t²

x = (7.5 m/s) t

where g = 9.8 m/s². When the ball reaches the ground (y = 0) for t > 0, we have

(13 m/s) t - g/2 t² = 0

13 m/s - g/2 t = 0

t = 2 (13 m/s)/g = (26 m/s)/g

Plugging this time into the x equation gives a horizontal range of

x = (7.5 m/s) (26 m/s)/g ≈ 20. m

How can you cause a cart moving to the right at a constant speed to move to the left at a constant speed.

Answers

Answer:

The answer is below hoped it helped

Explanation:

Forces, when unbalanced, cause objects to accelerate. And the direction of the acceleration is the same as the direction of the extra force. Just because an object is moving to the right does not mean there is more right force than left force. Whether the right or the left force is bigger depends on whether the object is speeding up or slowing down. There must be more right force than left force if an object is moving to the right and speeding up. There must be more left force than right force if an object is moving to the right and slowing down.

150 J of work is done on a closed system, and 270 J of heat is added to the system. Does the internal energy of the system increase, decrease, or stay the same? If the internal energy changes, state the change in energy.

Answers

The change in the internal energy of the system will increase.

The given parameters;

work on the system, w = 150 Jheat added to the system, Q = 270 J

The change in the internal energy of the system is calculated by applying first law of thermodynamics as follows;

ΔU = Q + w

where;

ΔU is the change in the internal energy

ΔU = 150 J + 270 J

ΔU = 420 J

Thus, the change in the internal energy of the system increases.

Learn more here:https://brainly.com/question/16148588

What is the given formula for acceleration?.

Answers

Answer:

a=v/t (searched)

Explanation:

a=acceleration

v=change in velocity

t=time

(searched)

Global warming means that

Answers

Answer:

The earth is heating up.

Explanation:

This is due to human activities, primarily fossil fuel burning, which increases heat-trapping greenhouse gas levels in Earth's atmosphere.

How long would it take a 500 w electric motor to do 150,000 j of work

Answers

Explanation:

300 second = 5 minutes

details

500 watts = 500 joules per second

Time = (1.50 x 10^5 joules)/(5 x 10^2 joules per second) = .3 x 10^3 seconds =300 second

We know the power is equal to the work done over time (that is, P=W/t)

Plugging in the given values, 500=150000/t
=> t=300 s

What is thermal energy.

Answers

Explanation:

thermal energy refers to the energy contained within a system that is responsible for its temperature. Heat the flow of thermal energy

The term 'thermal energy' is used differently, and often loosely, in different contexts. It refers to several distinct physical concepts, such as the internal energy, or as the enthalpy, of a body of matter and radiation; or as heat, defined as a type of energy transfer (as is thermodynamic work); or as the characteristic energy of a degree of freedom,
k
B
T
{\displaystyle k_{\mathrm {B} }T}, in a system that is described in terms of its microscopic particulate constituents, where
T
T denotes temperature and
k
B
k_{\mathrm{B}} denotes the Boltzmann constant.

I learned this last week in my Sci-tech class!

A spring has a spring constant of 150N/m
Calculate:
The mass in grams which must be hung from the spring in order to extend it by 0.1 m

Answers

Answer:

15N

Explanation:

mass=w/g 150N/m×0.1m

Ans=15N

Answer:

Both springs have a constant of 25Nm and the block is motionless. If the bottom spring is compressed 0.4m past its equilibrium and the block has a mass of 3kg, how far is the top spring stretched past its equilibrium?

g=10ms2

Possible Answers:

1.0m

0.8m

0.2m

0.4m

0.6m

Correct answer:

0.8m

Explanation:

Since the block is motionless, we know that our forces will cancel out:

Fnet=0

There are three forces in play: one from each spring, as well as the force of gravity. If we assume that forces pointing up are positive, we can write:

Fspring,top+Fspring,bot−mg=0

Plugging in expressions for each spring force, we get:

kxtop+kxbot−mg=0

Rearring for the displacement of the top spring, we get:

xtop=mg−kxbotk=(3kg)(10ms2)−(25Nm)(0.4m)25Nm

xtop=30N−10N25Nm=0.8m

4. symbol for the gravitational force ?

Answers

Answer: G

Explanation:

One g is the force per unit mass due to gravity at the Earth's surface and is the standard gravity (symbol: gn), defined as 9.80665 metres per second squared, or equivalently 9.80665 newtons of force per kilogram of mass.

Explain why the 4th state of matter would and would NOT make an acceptable force field.

Answers

The 4th state of matter would make an acceptable force field.

The 4th state of matter which is plasma would make an acceptable force field because this fourth state of matter is present in ionized form which has two charges on it i.e. cation which is a positive charge and anion which is a negative charge.

We know that charges attract as well repel other objects if they are strong enough. Positive charge repel positive charge but attract negative charge so we can conclude that 4th state of matter would make an acceptable force field.

Learn more: https://brainly.com/question/25628398

What is the best reference point for the car that is not in motion

Answers

Answer:

A reference point is a place or object used for comparison to determine if something is in motion. An object is in motion if it changes position relative to a reference point.

Explanation:

How fast is an object going if it travels from San Diego to Anaheim in 1.25 hours (hr)? The distance from San Diego to Anaheim is 93 miles (mi).

a) 74.4 mi/hr

b) 116.25 mi/hr

c) 0.013 mi/hr

d) 84.25 mi/hr

e) None of the answers

Answers

Answer:

74.4 mph

Explanation:

Since we have the distance in miles and the time it took in hours, we can divide the two to get miles per hour.

speed = mi/hr

speed = 93/1.25

speed = 74.4 mph

Which wave has the highest frequency?

Answers

Answer:its E

Explanation:

helppppp T^T
......
plsssss​

Answers

The ruler's center of mass is located on the vertical line defined by the 50 cm mark.
Other Questions
you haven't found it( name the sentence of the verb underline to include time and aspect) Help help help help help help help English What is normal air pressure What is the halfway between 5.3 and 5.4 A forensic specialist is called to a murder scene where a woman was shot while taking a bath they have been asked to collect firearm evidence the gun suspected of being used has fallen into the bathtub with the victim why should they not dry the gun before transporting it?A. it could cause the gun to rustB. it could cause the gun to fireC. it could get rid of fingerprints on the gunD. it could remove gun powder from the gun 3. Humans belong to the class ofA.ArthropodaB.TetrapodaC. Mammalia Avani's parents both work full time and do not arrive home until 8 p.m. each evening. Most nights, one of her parents picks up takeout or fast food to bring home for dinner. This is what Avani has known for the past several years, and it is widely accepted by her family. How could this likely impact Avani's relationship with food? She will carry the practice of eating primarily store bought meals into adulthood as a habit. She will learn to cook by herself and start preparing all the family's meals on her own. She will start eating her meals with friends' families so she can make healthier choices. She will speak with her parents about their work schedules to cook meals at home. Order the numbers 0.5, 1.25, 0.75, and 1.08 from least to greatest. Answer these question If the actual work is 0.85 MJ for a compressor, and the isentropic compressor work is 0.8 MJ, what is the isentropic compressor efficiency How many types of music are there in the world today? *Name the most popular in America* which is the correct word form of 8.16a . eight and sixteen tenthsb. eight and sixteen hundredthsc. eight hundred sixteen hundredthsd. eight hundred sixteen thousandths If you don't know the answer or you can't answer correctly, please just ignore it.Is the blended learning implemented by DepEd this school year difficult or easy for students? what led people to move to Tulsa Oklahoma? Rewrite each equation in standard form. 4 and 5 only Please help me with these I dont understand Slove for x ST=13TU=6UV=2x-18SV=4x-29 Timmy is 6 feet tall and casts a 10-foot shadow. Nikki casts a 9-foot shadow. How tall is Nikki? Simplify the expression. Solve the following basic calculus problem:[tex]\frac{d}{dx} (e^{x} cosx[/tex])