Tech A says that serviceable wheel bearings can be repacked by removing the dust cap, filling it with grease, and reinstalling it. Tech B says that the cotter pin must be replaced with a new one every time it is removed. Who is correct?

Answers

Answer 1

Serviceable wheel bearings can be repacked by removing the dust cap and the cotter pin must be replaced with a new one every time it is removed. Therefore, both Tech A and B are correct.

Sealed bearing assemblies are typically prefilled with lubricant. They also make a more reliable and consistent installation process due to the fact that every into comes preset at the proper clearance.

Furthermore, the serviceable wheel bearings can be repacked by removing the dust cap, filling it with grease, and reinstalling it. Also, cotter pin must be replaced with a new one every time it is removed.

Therefore, both tech A and B are correct.

Read related link on:

https://brainly.com/question/16612086


Related Questions

5. How is the hydrogen gas balloon different from the hot air balloon? explain this in terms of density

Answers

Answer:

either helium or hydrogen

Answer:

As air is heated, it becomes less dense than the surrounding cooler air. The less dense hot air has enough lifting power to cause the balloon to float and rise into the air.

Explanation:

Question 9 (1 point)
In the Standard Automotive Tire Designation P205/65R 15 94 T, the ________ is 94.

a)Load Index
b)Tread Height
c)Speed Rating
d)Wheel Height

Answers

Answer:

The Load Capacity is 94

Explanation:

I hope this helps!

Do a essay about engineering

Answers

Take a look around yourself. What do you see? Maybe books, chairs, a television, or even your clothes. All the day to day things that are man-made, you can be sure that an engineer helped make it. Engineers have shaped our world as we know it. There are many different kinds of engineers from chemical, mechanical, textile, civil, agricultural and structural engineers. Our civilization would be as advanced as the Stone Age without these people. This career demands a wide education of math and science. It is an ever-changing career with new advances in materials and the way products are produced. Engineering careers are very secure with respect to compensation. Regardless of this, it does have it’s disadvantages…show more content…

(Britannica 243) Another disadvantage of being an engineer is the actual status of being one. It is not looked upon as highly as other fields such as doctors and lawyers. Most of the time they are looked upon as nerds. In addition, most engineers are not promoted to high level positions such as presidents or top executives. They do not have the accounting or business education to do that particular job. This means that most engineers never get the opportunity to be their own boss. (Basta 22)

    The job of an engineer itself is a creative job. The actual definition of an engineer is “The profession in which a knowledge of the mathematical and natural sciences gained by study, experience and practice is applied with judgment to develop ways to utilize the materials and forces of nature economically for the benefit of mankind.” (Bastas 24) In having the basic skills and experiences in math and science, an engineer is basically an inventor. They are given a problem and are depended on to come up with a solution. Whether it be a new chemical, a mechanical part, or even a whole new system such as computer operating program, engineers are the problem solvers of our materialistic society.

There are four major types of essay and they are the Descriptive, Argumentative, Expository and the Narrative essay.

What is an essay?

An essay is generally are a piece of writing that gives an argument, educates or entertains a reader about a specific topic.

Writing an essay about engineering is to educate people about the field of study, and therefore, falls under the Expository essay.

Therefore, below are some tips that will guide you in writing an expository essay:

Start the essay structure with a good introduction.Write down a brief outline and craft out a summary of discussion topics to support your idea.Choose the point of view used in writing carefully.Use a clear concise language to write. Do NOT use figurative language.State your argument. Clarify your main point.Capture the reader's attention with your appealing introduction.Use your strong ideas and focus on them on each paragraph.Connect sentences with clear and logical main idea.Include your supporting information and cite your sources.Summarize your points/arguments with a concise and clear conclusion.

Read more about essay here:

https://brainly.com/question/25607827

What is the primary difference between the process of lost-wax casting as practiced in ancient times and that same process today

Answers

Answer:

Today, multiples can be created from the process. high-relief projects boldly from the background, and elements of high-relief may be in the round, unattached to the background.

Hey answer quick for 20 points

Answers

Answer:

Hey.....Thanks but FYI this is only 8 points....If u want to put 20....try putting 40...
Thank you!!!!!!!!!!!!!!!!

a solid yellow line on your side of the center stripe means

Answers

It means:

"Do Not Pass." When parking near a corner, you may park your vehicle no closer than 20 feet from a crosswalk.

<3

13. Which stroke of the four-stroke cycle is shown in the above figure?
O A. Intake
B. Power
O C. Exhaust
O D. Compression
Mark for review (Will be highlighted on the review page)
<< Previous Question
Next Question >>

Answers

Answer:

the cycle is on the power just before the exhaust as both the valves are closed

Which of the following is critical when performing maintenance?

A) informing a customer of the vehicles tire pressure.

B) informing a customer of a vehicle concern.

C) informing a customer of the vehicle’s manufacturer date.

D) informing the customer of maintenance promotions.

Answers

I think the answer is C

How do you earn Brainliest?

Answers

But two people have to answer or one person after a while before it’ll pop up as an option

Write the formula for calculating mechanical advantage for Levers, pulleys and wheels and axles.

Answers

Answer:

TO BE HONEST I DONE KNOW :D

Both model building codes and NFPA __________ can be used to determine the type of construction used in a building.

Answers

Answer:

Both model building codes and NFPA 220 can be used to determine the type of construction used in a building.

Question 8 (1 point)
In the Standard Automotive Tire Designation P205/65R 15 94 T, the "T" designates the Tires _______.

a)Aspect Ratio
b)Load Index
c)Speed Rating
d)Tread Width

Answers

Answer:

I believe it is B : Load Index. Please tell me if I'm wrong.

Explanation:

I'm taking Tech/Engineering and my dad works on cars. I don't know too much about tires, but I know a little. If you need help with engineering, Tell me!

Question 2 (1 point)
Technician A says Radial ply Tires are used for carrying a heavy Load. Technician B says that Bias Ply Tires are made with the Plies laid diagnally.Which Technician is correct?

a)Technician A
b)Technician B
c)Both A & B
d)Neither

Answers

Answer:

c)

Explanation:

they are both correct because ply tires can carry and are made with the plies laid diagonally.

The _______ is an exhaust manifold made of mandrel-formed steel tubes that are equal in length and joined at a common collector.

Answers

Answer:

header

Explanation:

Answer:

header

Explanation:

The __________ is an exhaust manifold made of mandrel-formed steel tubes that are equal in length and joined at a common collector. because quizlet said so  

A change in what component of microscopy influences the apparent size of the objects being viewed?.

Answers

Magnification is known to often influence the size of an object under the microscope. A change in what component of microscopy influences the apparent size of the objects being viewed is called magnification.

An Increased magnification will lead to an increase the apparent size of the object. Magnification is simply known to be the process of making bigger the apparent size of something.

Magnifying glasses is also known to make objects looks bigger due to their convex lenses. The magnification can be said to be positive or negative in its work.

Learn more about magnification from

https://brainly.com/question/15744335

How much does it cost to fix a rail road

Answers

Answer:

money

Explanation:

Mark has a baking tray with 24 muffins the muffins are arranged in 4 rows how many muffins are in each row

Answers

Answer:

6

Explanation:

I know this because if you divide 24 by 4 you get 6

If too much amplification is applied to an audio signal, waveform distortion can occur causing a phenomenon called _____.

Answers

Answer: clipping

Explanation:

Which principle of the software engineering code of ethics has gilbert violated?.

Answers

Answer:

Judgement

Explanation:

Gilbert is required by the Judgement Principle to "disclose those conflicts of interest that cannot reasonably be avoided or escaped." Since Gilbert professionally believes that the software meets specifications, secures documents, and satisfies user requirements, it is not clear if he violated any principle. However, he could have informed his client of his interest in the software and also presented other software packages of different companies from which the client could make its independent choice.

Dislocations have a major effect on the plastic deformation of metals, but do not play a major role in the mechanical behaviour of ceramics. Why?.

Answers

Dislocation often plays a major role in plastic deformation of the material because material can be increased by plastic deformation. The number of dislocation often brings about motion depicts plastic deformation.

Dislocations are gotten and move when a stress is applied. The motion of dislocations allows slip and then plastic deformation takes place.

The dislocations often move along the densest planes of atoms in a material. This is due to the fact that the stress needed to shift the dislocation rises with the spacing between the planes.

Dislocations play an essential role in the plastic deformations of crystalline materials as they hinder the synchronized breakage of bonds between atoms in materials.

Learn more from

https://brainly.com/question/15261205

direction: fill in the blanks you can find your answer in the box provided below write your answer in blank provided.
1. Never wear open toed ______ while working with hot metal or welding apparatus.

2. The ______ must make a perfect seal around the ear to be effective

3. the ______ must be kept free of abrasions scrapes and nicks.

4. an apparatus worn over the mouth and nose to prevent inhalation of dust is ______.

5. when grinding and cutting _______ should be used.

6. the _______ makes you work with one hand only.

7. you should wear _______ to protect the feet from falling or rolling object.

8. the ______ prevent the entry of sparks between our clothes and body.

9. the ______ must be worn while inside the workshop.

10. the ______ is more convenient to use because it allows both hands to work freely.​

Answers

Answer:

1) footwear (100% sure)

2) earmuffs (100% sure)

3) welding helmet

4) respirator (100% sure)

5) safety glasses

6) hand held shield (100% sure)

7) safety shoes (100% sure)

8) leather jacket

9) hard hat (100% sure)

10) safety harness (100% sure)

You are working on a large plant floor when you hear an explosion, which is followed by billowing smoke, debris and the fire alarm going off. Should you shelter in place ?

Answers

No, evacuation would be the best choice

Working upward from the stove, the worker just installed K2654. What part should be installed next?

Answers

Answer: adapter J44493

Explanation: it’s above the previous

Bon
9. Not having enough food can contribute to
someone remaining in the
A business cycle
B cycle of poverty
inflationary cycle
D same school

Answers

the answer is B, cycle of poverty
The answer is “B” cycle of poverty

kdjdjfjfhfj jdjrjfbbfbf(xmpqitexsy.)​

Answers

It’s cool wow good game

If the actual work is 0.85 MJ for a compressor, and the isentropic compressor work is 0.8 MJ, what is the isentropic compressor efficiency

Answers

Answer:0.94

Explanation:

nc=(wc,isentropic)/(wc,act)

Many engines in FWD vehicles must be removed with the transmission still attached.
O a. True
O b. False

Answers

Answer:

True

Explanation:

How should you mark a component listed on the VCU form that
is not installed on the customer's vehicle?
A) Mark it N/A
B) Nothing
C) Mark it green
D) Mark it red

Answers

I’m not that shareholding about it but I think the answer is C mark it green I hope I don’t get it rong

The football team has a total of 20 jerseys. There are 6
​medium-sized jerseys. What percent of the jerseys are​ medium-sized jerseys?

Answers

20% of the jerseys are medium sized

Answer:

89

Explanation:

an HV battery radiator has intake air routed through the cooling fins of the ____ or heat exchanger before it circulates over the battery packs

Answers

Answer:

While inspecting the vehicle when it is hot, it is found to have excessive coolant in the coolant recovery container. After the engine cools the level returns to normal. Tech A says that this could be caused by a restriction in the radiator.

Explanation:

Other Questions
Can someone plz help me :( Jasmine wants to make more cleaning solution 5 A prokaryotic cell is 5.0 um in length. A virus particle is 300 nm in length. How many times larger is the prokaryotic cell compared to the virus particle? A 2 B 17 C 60 D 167 Multiply the binomials:(3x + 4)(5x 2) The frequency and energy ranges of photons in some parts of the electromagnetic spectrum are given in the table above. Which of the following could be the energy of a photon in the visible range?. Approximate 23 by following the steps below.V23 must lie between the whole numbersandYou must answer all questions above in order to submit. You get to write the script for your favorite TV shows Thanksgiving episode! Write a summary of the plot of the episode you would write. Help me please quickly This simply means a general agreement:a Consignmentb. Consensusc.Conscriptiond.Continuity Close Reading: Which amendment is Representative London alluding to when he says: "There isonly one way of facing an idea you fear or wish to combat, and that is the old and safe Americanrule of free and unrestricted discussion. Every attempt to use any other method has alwaysproven disastrous."? Which step(s) of SQR3 fall in the active reading phase? If subjects are awakened every time they enter REM sleep, then they will ______. Group of answer choices The points in the table lie on a line. Find the slope of the line The following formula gives the circumference C of a circle with radius r.C=2rFind the circumference of a circle with radius 20 A negative attitude and feeling toward an individual that is based on that person membership in a specific group is called Graph the equation. I need help with this ASAP It will give you 55 points!!!!!!! Anthony is building a cube-shaped box to store some of his smaller crafting supplies. The formula for the surface area of a cube is SA=6s2, where s is the side length of the cube. If he has a total of 200 in.2 of cardboard, can Anthony build a box where s=6 in.?No, he needs 16 in.2 more cardboard.No, he needs 232 in.2 more cardboard.Yes, he will have 56 in.2 of cardboard left over.Yes, he will have 128 in.2 of cardboard left over Which step of cellular respiration uses oxygen. A 16-year-old teenager has just been arrested for the third time for shoplifting. She will MOST likely be labeled by society with: