The condition anaphylaxis requires the reaction to be mediated through Ig E antibodies while an anaphylactoid reaction doesn’t need the presence of Ig E antibodies for a hypersensitive reaction to occur.
Anaphylactic and anaphylactoid reactions are both life-threatening events that result from a misdirected and overreactive immune response to a substance that is viewed by the body as a foreign substance. This foreign substance intervening the immune system is referred to as an antigen. The reactions are systemic, which involve multiple organ systems, and are direct results of the release of chemical mediators from basophils and mast cells.
An anaphylactic reaction occurs only after the patient/carrier has been previously exposed, for at least once, to the antigen and is then sensitized; while an anaphylactoid reaction can occur following a single, first-time exposure to a certain or some certain agents in non-sensitized patients.
Hence, for the reason that anaphylactic and anaphylactoid reactions produce the same clinical manifestations, they are treated exactly the same way and we use the term anaphylaxis to refer to both conditions.
Learn more about anaphylactoid reaction here:
https://brainly.com/question/14470162
#SPJ4
5. identify the most important types of intermolecular/particle forces present in the solids of each of the following substances. a. ar b. hcl c. hf d. cacl2 e. ch4 f. co g. nano3
It's important to note that the below are generalizations and that the nature of inter molecular forces can depend on many factors such as temperature, pressure, and the specific arrangement of the molecules.
What is most important type of inter molecular force that present in the solid?a. In solid argon (Ar), the most important type of intermolecular force is London Dispersion forces.b. In solid hydrochloric acid (HCl), the most important type of intermolecular force is dipole-dipole interactions.c. In solid hydrogen fluoride (HF), the most important type of intermolecular force is hydrogen bonding.d. In solid calcium chloride (CaCl2), the most important type of intermolecular force is ionic bonding.e. In solid methane (CH4), the most important type of intermolecular force is London Dispersion forces.f. In solid carbon monoxide (CO), the most important type of intermolecular force is London Dispersion forces.g. In solid nitric acid (HNO3) (Nano3), the most important type of inter molecular force is dipole-dipole interactions.To learn more about molecular particles refer:
brainly.com/question/14357742
#SPJ4
which of the following are considered bases? select all that apply. multiple select question. Ba(OH)2 HCl NH3 HNO3 NaOH
Ba(OH)2 and NaOH are considered bases
Acids and bases are types of chemical compounds that have certain characteristics. Acids are compounds that donate hydrogen ions (H+) when dissolved in water, and have a pH less than 7. Bases are compounds that accept hydrogen ions when dissolved in water, and have a pH greater than 7. They are opposite in nature and neutralize each other.The strongest acid is fluoroantimonic acid, HSbF6. It has a scale-topping Hammett acidity function (H0) value of -18.3. The strongest base is lithium diisopropylamide (LDA), which has a basicity of around -3.5. However, it's important to note that these substances are extremely reactive and dangerous to handle, and are mainly used in laboratory settings.
To learn more about NaOH here:
https://brainly.com/question/29854404
#SPJ4
In chronic respiratory acidosis, the kidneys compensate by doing which of the following? You may select more than one answer. Choose all that apply. A) Excretion of bicarbonate B) Increased production of ammonia C) Secretion of H+ into renal tubular fluid
In chronic respiratory acidosis, the kidneys compensate by doing excretion of bicarbonate and increased production of ammonia.
What is bicarbonate?
Bicarbonate is a salt compound composed of sodium and bicarbonate ions. It is also known as baking soda or sodium bicarbonate and is widely used in a variety of applications. In the kitchen, it is used as a leavening agent in baking, and it is also used as a gentle cleaning agent for surfaces and cookware. Bicarbonate is also used in the production of soaps, detergents, and various other products. In the medical field, bicarbonate is used as an antacid to treat acid reflux and other digestive problems. It is also an important electrolyte and acid-base buffer in the body, helping to regulate the pH of the blood.
To learn more about bicarbonate
https://brainly.com/question/30095333
#SPJ4
A student writes the chemical equation of the reaction between lead and copper chloride. Pb(s) + CuCl₂(aq) →PbCl₂(aq) + Cu(s) Which option explains the reason for the formation of lead chloride? copper is more reactive than lead lead is less reactive than copper lead and copper are equally reactive lead is more reactive than copper
As a result of the reaction between lead powder and chlorine gas, solid copper is removed from copper in this displacement process.
A displacement reaction takes place when lead powder is added to a copper chloride solution, resulting in the formation of solid copper.
Lead chloride is created when lead is chlorided.
The lead atom displaces the copper atom in copper chloride, resulting in the production of copper and lead chloride.
As a result, this reaction is also known as a displacement reaction.
Learn more about displacement reaction from here:
https://brainly.com/question/24372098
#SPJ4
The speed of light is 3.0 x 10^8 m/s. If the distance from Earth to the Sun is 1.5 x 10^8 km, how many minutes does it take for light from the Sun to reach the Earth?
minutes
Your calculations, which are rather precise, indicate that the sun is 500 light seconds away. Light travels thousands of miles roundtrip (not quite 17m). You receive 3.6 round trips each hour, or 74 daily.
Answer:
about 8.3 minutes to reach the Earth
Explanation:
How many significant figures are in each of the following measured quantities? Drag the appropriate items to their respective bins. Help B0 610 000 40C 5.0 x 10-L 15.70L 200686 One TWO Three Four Five So ws
4.0*10^(-3)L have 2SF, 3.004.0*10^(-3) L has two (SF), 3.00m has three, 50.100,000g has eight, 9018.17kg has six, 80.10 mL has four, and 60.4 degrees Celsius has three. Significant figures are used to construct the number that is provided as digits.
These digits carry a meaningful representation of the numerals. Figures are frequently replaced with meaningful numbers. We can find the number of significant digits by adding up all the values starting with the first non-zero digit on the left. For instance, 12.45 has four important digits. The significant figures of a number are the important or critical digits that correctly convey the meaning of that number. For instance, the number 6.658 has four significant digits. The statistics' precision comes from these enormous sums.
4.0*10^(-3)L have 2SF, 3.00m have 3SF, 50.100,000g have 8SF, 9018.17kg have 6SF, 80.10 mL have 4SF, 60.4degreeC have 3SF.
complete question:How many significant figures are in each of the following measured quantities?
Drag the appropriate items to their respective bins.
4.0*10^(-3)L, 3.00m, 50.100,000g, 9018.17kg ,80.10 mL ,60.4degreeC
1SF ,2SF ,3SF, 4SF, 5SF, 6SF, 8SF
learn more about significant figures refer:brainly.com/question/14359464
#SPJ4
A student calculates the time taken (in minutes) for the light from the sun to reach the Earth. e sun is 93 million miles away (1 mile 1.609 km) and the speed of light is 3.00 x 108 m/s. The calculation is set up as follows:8.3 min, since 9.3 x 10^7 has 2 significant figures 8.313, since 1.609 has 4 significant figures 8 min, since there is only 1 significant figure in 60 s 8.31 min, since 3.00 x 10° has 3 significant figurts
The 8.3 min, since 9.3*10^7 has two significant figures.
What is mass ?
A rough estimate of how much material is contained or makes up a physical body. The mass of an object affects its inertia and, subsequently, the force required to accelerate it according to classical mechanics, which is why Newton's equations of motion depend on mass.
What is speed ?
A change in position direction or speed for an object. How quickly anything moves depends on the distance traveled and the time required to cover that distance. Speed is a scalar quantity, having only a direction and no magnitude.
Therefore, 8.3 min, since 9.3*10^7 has two significant figures.
Learn more about mass from the given link.
https://brainly.in/question/790970#:~:text=Expert%2DVerified%20Answer,-45%20people%20found&text=Mass%20is%20the%20amount%20of,is%20(Mass%20*%20Acceleration)
#SPJ4
Draw the organic product of the two-step synthesis below. CH3CH2C=CH 1. NaNH2 2. PhCH2Br
The organic product of the two-step synthesis below is CH3CH2CH2CH2Br.
Step 1: NaNH2 reacts with CH3CH2C=CH to form CH3CH2CH2NH2
Step 2: PhCH2Br reacts with CH3CH2CH2NH2 to form CH3CH2CH2CH2Br.
What is synthesis?
synthesis is the process of combining two or more chemical elements or compounds to form a more complex product. Syntheses can involve a variety of techniques, such as combining two or more different molecules, or using chemical reactions to create new ones. It is an important process in the formation of many products, including drugs and other materials.
Therefore, The organic product of the two-step synthesis below is CH3CH2CH2CH2Br.
To learn more about synthesis
Here: https://brainly.com/question/16281119
#SPJ4
if the initial and re-test of total chlorine from the primary carbon tank sample testing port shows a result greater than 0.1ppm, then the teammate should understand:
Testing is performed after the secondary carbon filter.
What is carbon?
Carbon is the 15th most abundant element in the Earth's crust and the fourth most abundant element in the universe by mass, after hydrogen, helium and oxygen. Carbon's abundance, its unique diversity of organic compounds, and its unusual ability to form polymers at temperatures normally found on Earth allow this element to serve as a common element of all known life. It is the second most abundant element in the human body by weight (about 18.5%) after oxygenTo know more about carbon, click the link given below:
https://brainly.com/question/6836898
#SPJ4
FILL IN THE BLANK Using the following general equation for a nuclear reaction, complete the statements below.
The atomic number for Uranium is____ .
The mass of the reactant neutron is___ .
The atomic mass for Krypton is ___ .
There are ___ Barium neutrons.
The number of neutrons this reaction emits is ___ .
The atomic number for Uranium is 92. The mass of the reactant neutron is 1.00 amu. The atomic mass for Krypton is 36. There are naturally 81 Barium neutrons. The number of neutrons this reaction emits is 3.
Since uranium atoms all have 92 protons, they all have the same atomic number.
The neuron has one neuronic mass (the mass of one neutron - hence the subscript 0 because this generally describes the number of protons present).
The mass number of an atom is the sum of its protons and neutrons in its nucleus. This mass number is usually demonstrated as a superscript on the element symbol.
To get the number of neutrons in an isotope, we have to subtract the mass number from the atomic number.
The number of neutrons emitted is 3 because the number in front of an element symbol in a reaction indicates the amount of that element in that reaction (in moles) (either in the reactants or products side).
Learn more about Mass number here:
https://brainly.com/question/4408975
#SPJ4
?BaF2 + ?K3PO4→ ?Ba3(PO4)2 + ?KF
How many grams of KF could be produced using 0.25 moles of BaF2?
____________g of KF
1. The balanced equation for the reaction is:
3BaF₂ + 2K₃PO₄ -> Ba₃(PO₄)₂ + 6KF
2. The mass of KF produced using 0.25 mole of BaF₂ is 29 grams
1. How do I write the balanced equation?The balancing of chemical equation is simply done by doing a head count of the different species and ensuring they are balanced on either sides of the equation.
Thus the balanced equation for the reaction is given as shown below:
3BaF₂ + 2K₃PO₄ -> Ba₃(PO₄)₂ + 6KF
2. How do I determine the mass of KF produced?First, we shall obtain the moles of KF produced. This is shown below:
3BaF₂ + 2K₃PO₄ -> Ba₃(PO₄)₂ + 6KF
From the balanced equation above,
3 moles of BaF₂ reacted to produce 6 moles of KF
Therefore,
0.25 mole of BaF₂ will react to produce = (0.25 × 6) / 3 = 0.5 mole of KF
Finally, we shall determine the mass of KF produced. Details below:
Mole of KF = 0.5 moleMolar mass of KF = 39 + 19 = 58 g/moleMass of KF =?Mole = mass / molar mass
0.5 = Mass of KF / 58
Cross multiply
Mass of KF = 0.5 × 58
Mass of KF = 29 grams
Thus, the mass of KF produced is 29 grams
Learn more about mass produced:
https://brainly.com/question/9526265
#SPJ1
For each of the following unbalanced chemical equations, suppose 10.0 g of each reactant is taken. Show by calculation which reactant is the limiting reagent. Calculate the mass of each product that is expected.a. CO(g) + H2(g) CH3OH (l) b. Al(s) + I2(s) AlI3 (s) c. Ca(OH)2 (aq) + HBr(aq) d. CaBr2 (aq) + H2O
The following are equations in which the reactant is the limiting reagent.
What is a reactant?
A reactant is a substance that is consumed in a chemical reaction. In a balanced chemical equation, all reactants are listed on the left side of the equation and are consumed as the reaction proceeds. The reactant that is used up first in a reaction is called the limiting reactant or limiting reagent.
a. CO(g) + H2(g) -> CH3OH (l)
To find the limiting reagent, we need to compare the number of moles of each reactant. We can find the number of moles of each reactant by using the molar mass of each substance.
Molar mass of CO = 28.01 g/mol
Molar mass of H2 = 2.02 g/mol
Molar mass of CH3OH = 32.04 g/mol
10.0 g CO = 10.0 g / 28.01 g/mol = 0.357 mol CO
10.0 g H2 = 10.0 g / 2.02 g/mol = 4.95 mol H2
From the balanced equation, we know that for every one mole of CO, we need one mole of H2 to make one mole of CH3OH. Therefore, H2 is the limiting reagent.
The number of moles of CH3OH that can be produced is equal to the number of moles of H2, which is 4.95 mol.
To find the mass of CH3OH, we can use the molar mass:
4.95 mol CH3OH x 32.04 g/mol = 160 g CH3OH
b. Al(s) + I2(s) -> AlI3 (s)
Molar mass of Al = 26.98 g/mol
Molar mass of I2 = 253.8 g/mol
Molar mass of AlI3 = 380.2 g/mol
10.0 g Al = 10.0 g / 26.98 g/mol = 0.371 mol Al
10.0 g I2 = 10.0 g / 253.8 g/mol = 0.039 mol I2
From the balanced equation, we know that for every one mole of Al, we need three moles of I2 to make one mole of AlI3. So I2 is the limiting reagent.
The number of moles of AlI3 that can be produced is equal to the number of moles of I2, which is 0.039 mol.
To find the mass of AlI3, we can use the molar mass:
0.039 mol AlI3 x 380.2 g/mol = 1.495 g AlI3
To learn more about reactants from the given link:
https://brainly.com/question/6421464
#SPJ4
What is the structure of a rearranged carbocation that does not have a four-membered ring in the following acid-catalyzed dehydration of the following compound?
Carbocation formation is the result of acid-catalyzed dehydration. The stability of carbocations determines the reactivity of this reaction. The carbocation stability order would be as follows:
(Dual bond conjugation)>Tertiary>Secondary>Primary
Increasing the stability of carbocation intermediates is not the only factor that leads to molecular rearrangement. If angle strain , torsional strain or steric crowding in the reactant structure may is relieved by an alkyl or aryl shift to a carbocation site, such a rearrangement is commonly observed.
The following examples illustrate rearrangements induced by the strain in a small ring. Although a 3º-carbocation is initially formed, the angle and torsional strain of the four-membered ring is reduced by a methylene group shift resulting in ring expansion to a 2º-carbocation.
The given question is incomplete. The complete question is:
What is the structure of a rearranged carbocation that does not have a four-membered ring in the following acid-catalyzed dehydration of the following compound?
To know more about Carbocation
https://brainly.com/question/13164680
#SPJ4
At 25°C, KP. = 2.9 x 10-3 for the reaction NH4OCONH2(s) ⇌ 2NH3(g) + CO2(g) In an experiment carried out at 25•c, a certain amount of NH4OCONH2 is placed in an evacuated rigid container and allowed to come to equilibrium. Calculate the total pressure in the container at equilibrium.
The total pressure of for the reaction NH4OCONH2(s) ⇌ 2NH3(g) + CO2(g) In an experiment carried out at 25•c, a certain amount of NH4OCONH2 in the container at equilibrium is
as Kp = [PNH3]2 [Pco2]
PNH3--> is the partial pressure of NH3 = P* XNH3
Pco2--> i is the parital pressure of co2 = P*Xco2
where p--> total pressure
XNH3=2/3,Xco2=1/3 --> are mole fractions of NH3 , CO2 respectively
2.9 *10^(-3)=[2/3 P]2 [1/3P]
P= [(27*2.9*10^(-3))/4](1/3)
=0.2695 atm
All pressures present in a reference system are added together to get the total pressure, or ptot. Bernoulli (see Fluid mechanics) defined this pressure as the sum of the static pressure (p), dynamic pressure (pdyn), and geodetic component (g, z) that exist in a fluid along a stream line in a frictionless flow.
Learn more about total pressure from here:
https://brainly.com/question/30255561
#SPJ4
A closed sample of gas occupies 1.80 L at 212K. It is expanded to 2.70 L at constant pressure. What is it’s new temperature?
Using Charles's law, it’s new temperature is 318K.
According to Charles' law, with constant pressure, the volume of an ideal gas increases in direct proportion to the absolute temperature. The law also stipulates that when the pressure on a sample of a dry gas is held constant, the Kelvin temperature and the volume will be in direct proportion.
Charles' law states that, if the pressure is constant, the volume occupied by a fixed amount of gas is directly proportional to its absolute temperature.
According to Charles's law,
V1/T1 = V2/T2
Given,
V1 = 1.80L
V2 = 2.70L
T1 = 212k
T2 = ?
Putting above values in the formula,
⇒ 1.80 / 212 = 2.70 / T2
⇒ T2 = 318K
To learn more about Charles's law from given link
https://brainly.com/question/888898
#SPJ1
3.3L of a gas is collected at 40 degrees c. What will its volume be if it is heated up to 57 degrees C
Considering the Charles' law, the volume if it is heated up to 57 degrees C will be 3.48 L.
Charles' lawCharles' law establishes the relationship between the volume and the temperature of a gas sample at constant pressure: when the temperature is increased, the volume of the gas also increases and when the temperature is decreased, the volume decreases.
That is, the volume is directly proportional to the temperature of the gas and is expressed mathematically as:
V÷T= k
where
V is the volume.T is the temperature.k is a constant.Analyzing an initial state 1 and a final state 2, it is fulfilled:
V₁÷T₁= V₂÷T₂
Final volume in this caseIn this case, you know:
V₁= 3.3 LT₁= 40 °C= 313 K (being 0 °C= 273 K)V₂= ?T₂= 57 °C= 330 KReplacing in Charles' Law:
3.3 L÷ 313 K= V₂÷ 330 K
Solving:
(3.3 L÷ 313 K)× 330 K= V₂
3.48 L= V₂
Finally, the final volume will be 3.48 L.
Learn more about Charles' Law:
brainly.com/question/4147359
#SPJ1
What is the oxidation number of the manganese atom (Mn) in this compound?
MnO₂
+2
O +4
O4
The correct answer is B) +4. This is because the oxidation number of the manganese atom (Mn) in MnO₂ is +4.
What is oxidation number?The oxidation number of an atom is a number assigned to an element in a chemical compound that indicates the total number of electrons that an atom has lost or gained. Oxidation numbers are typically written with a plus or minus sign to indicate whether an atom has lost or gained electrons. Oxidation numbers can be used to determine the type of reaction taking place in a chemical reaction and the type of bonds formed. Oxidation numbers are also useful for recognizing the oxidation state of an element in a compound. The oxidation number of an atom in its elemental form is always zero.
This is because the oxidation number of oxygen (O) is always -2, and the oxidation number of the compound must add up to 0. Therefore, the oxidation number of Mn must be +4 in order for the compound to have an overall charge of 0.
To learn more about oxidation number
https://brainly.com/question/13182308
#SPJ1
name the following compound. group of answer choices 2,5-dibromobenzene 3,6-dibromobenzene 1,4-dibromobenzene 2,5-dibromocyclohexene 1,4-bromocyclohexene
Naming of the following compound is given below.
What is chemical compound?A chemical compound is a substance composed of two or more elements in a fixed ratio. Chemical compounds can be formed when atoms of two or more elements combine chemically. Examples of chemical compounds include water (H2O), table salt (NaCl), and carbon dioxide (CO2). Compounds are usually identified by their chemical formula, which describes the ratio of atoms present.
2,5-Dibromobenzene: A compound composed of six carbon atoms arranged in a ring structure, with two bromine atoms bonded to the two carbon atoms in the center of the ring.
3,6-Dibromobenzene: A compound composed of six carbon atoms arranged in a ring structure, with two bromine atoms bonded to the two carbon atoms at either end of the ring.
1,4-Dibromobenzene: A compound composed of six carbon atoms arranged in a ring structure, with two bromine atoms bonded to the two carbon atoms located adjacent to each other in the center of the ring.
2,5-Dibromocyclohexene: A compound composed of six carbon atoms arranged in a ring structure, with two bromine atoms bonded to the two carbon atoms located across from each other in the middle of the ring.
1,4-Bromocyclohexene: A compound composed of six carbon atoms arranged in a ring structure, with one bromine atom bonded to the two carbon atoms located adjacent to each other in the center of the ring.
To know more about chemical compound click-
https://brainly.com/question/26487468
#SPJ4
Consider the reaction shown.
4HCl(g)+O2(g)⟶2Cl2(g)+2H2O(g)
Calculate the number of grams of Cl2 formed when 0.460 mol HCl reacts with an excess of O2 .
Answer:
16.4 g of Cl2
Explanation:
4HCl(g) + O2(g) ⟶ 2Cl2(g) + 2H2O(g)
From the balanced equation, we know that for every 4 moles of HCl that react, 2 moles of Cl2 are formed. If we have 0.460 mol HCl, we can use the stoichiometry of the reaction to find the number of moles of Cl2 that will be formed.
0.460 mol HCl x (2 mol Cl2/4 mol HCl) = 0.230 mol Cl2
To find the number of grams of Cl2, we can use the molar mass of Cl2 (70.906 g/mol) and multiply it by the number of moles we just calculated.
0.230 mol Cl2 x 70.906 g/mol = 16.4 g Cl2
So, 0.460 mol HCl reacts with an excess of O2 to form 16.4 g of Cl2.
To determine whether a chirality center is in the R or S configuration, start by mentally turning the molecule so that the lowest priority substituent usually a (Choose: Fluorine, Carbon, Hydrogen), is pointing (Choose: Forward, Backward, Down, Up). Then, rank the remaining substituents from highest priority, which corresponds to (choose: highest atomic number, longest chain, lowest atomic number, shortest chain), to lowest priority. If the substituents decrease priority in a (Choose: horizontal, counterclockwise, clockwish, vertical) order, the configuration is R. If the substituents decrease in priority in a (Choose: counterclockwise, Horizontal, Vertical, Clockwish) order, the configuration is S.
To determine whether a chirality center is in the R or S configuration, the spatial arrangement of each atom must be determined.
The structures are a non-superimposable mirror image stereochemical label that is used to indicate the relative spatial orientation of each atom in a molecule.
R indicates that a clockwise circular arrow going from higher priority to lower priority crosses over the lowest priority substituent, which is in the back. The R and S stereoisomers are non-superimposable mirror images, which means they do not become the same molecule when reflected on a mirror plane.
When you label a molecule as R or S, the chiral priorities of each substituents are considered.
Some general methods for determining priorities are:
The higher the atomic number of the directly attached atom, the higher the priority.If two substituents have the same first atom, the atomic number of the atom attached to the one is considered in step 1.If the overall substituents are too similar, a higher number of same-atom branches determines higher priority (e.g. isopropyl has higher priority than ethyl).Learn more about stereochemical label here:
https://brainly.com/question/13739466
#SPJ4
the synthesis above can be performed with some combination of the reagents listed below. give the necessary reagents in the correct order, as a string of letters (without spaces or punctuation). be sure to consider stereochemistry and regiochemistry. a. hbr b. br2, ccl4 c. nac2h d. h2, lindlar e. 9-bbn then h2o2, naoh f. hg(oac)2, h2o then nabh4 g. o3, then water h. xs nanh2, then water
The correct order of the reagents for synthesis of given product is B, H, G.
Chemical synthesis is a process that involves the construction of complex chemical compounds from simpler ones. It is also defined as the process by which many substances which are important to daily life are obtained effectively. Usually it is applied to all types of chemical compounds, but most syntheses that are carried out are organic molecules.
Reagent is defined as a substance that is used to carry out a laboratory test. It may be used in a chemical reaction to detect, measure, or make other substances. When the compound undergoes continuous conversions under the influence of different reagents a new product is formed. The synthesis is given in the image.
Learn more about chemical synthesis from the link given below.
https://brainly.com/question/16024601
#SPJ4
A fluorescent dye has a molar absorptivity of 62,300 cm-1M-1 , at what concentrations would you estimate that the fluorescence signal will deviate from linearity? Assume a 1 cm pathlength.
1.6×10⁻⁵M is the concentrations at which the fluorescence signal will deviate from linearity when a fluorescent dye has a molar absorptivity of 62,300 cm⁻¹M⁻¹.
What is fluorescence?When a substance generates electromagnetic waves inside the longer wavelength range and makes them visible to the human eye, it is a fascinating occurrence. Let's first define fluorescence in order to comprehend this. This allows the substance to gently transition from the partly excited state to the ground state. Fluorescence is the term for this phenomena.
A= e×c×l
A= 1
e= 62,300 cm⁻¹M⁻¹
l= 1 cm
substituting all the given values in the above equation, we get
1= 62,300 cm⁻¹M⁻¹×c×1 cm
c=1.6×10⁻⁵M
Therefore, 1.6×10⁻⁵M is the concentrations at which the fluorescence signal will deviate from linearity.
To learn more about fluorescence, here:
https://brainly.com/question/14742655
#SPJ1
Which of the following actions are likely to increase the rate of a chemical reaction? Check all that apply. A. Decreasing reactant concentration B. Decreasing reaction temperature C. Decreasing surface area of reactants D. Increasing reaction temperature E. Increasing reactant concentration F. Adding a catalyst
The following actions are likely to increase the rate of a chemical reaction,A. Decreasing reactant concentration, D. Increasing reaction temperature, E. Increasing reactant concentration, F. Adding a catalyst.
What is the temperature?
The temperature is a measure of the amount of heat energy present in a given environment. Temperature is measured in degrees, typically on the Celsius (°C) or Fahrenheit (°F) scales. Temperatures can vary greatly from one place to another and from one time of day to another.The temperature can vary greatly depending on your location and the time of day. Generally speaking, the average temperature of Earth is around 59 degrees Fahrenheit (15 degrees Celsius). However, temperatures can range from -129 degrees Fahrenheit (-89 degrees Celsius) in the coldest areas of the planet to 136 degrees Fahrenheit (58 degrees Celsius) in the hottest spots.
To learn more about temperature
https://brainly.com/question/4735135
#SPJ4
for example, in europe, a ban on single-use plastic items such as cutlery, plates, straws, and stir sticks took effect in 2021. this directive is expected to reduce the consumption of these items by around 6.8 billion per year and prevent the release of around 3.4 million tons of co2.
The European Union's ban on single-use plastic items is a major step forward in the fight against plastic pollution . It is estimated that this directive will reduce plastic consumption by 6.8 billion items annually and prevent the emission of 3.4 million tons of CO2.
What is the plastic ?
Plastic is a synthetic or semi-synthetic material made from a wide range of organic polymers compounds. It is typically a lightweight, durable, and malleable material used in a variety of items, such as packaging, consumer goods, industrial products, and construction materials. The versatility of plastic materials has allowed them to become a ubiquitous part of daily life, while also contributing to environmental concerns due to the production and disposal of plastic waste. Plastic materials can be divided into two main categories based on their properties: thermoplastics and thermosets. Thermoplastics are soft and can be melted and reshaped when heated, while thermosets remain rigid after curing, forming a permanent shape.
To learn more about plastic
https://brainly.com/question/25834689
#SPJ4
(04.03 hc) what is cellular respiration? use complete sentences to explain how the mass of carbon is conserved during cellular respiration.
The cellular respiration is the process where the chemical reactions takes place to break down the glucose to produce the ATP.
The reaction of cellular respiration is given as :
C₆H₁₂O₆ + 6 O₂ ---> 6CO₂ + 6 H₂O
The mass of carbon is conserved during cellular respiration. The law of conservation of mass states that the mass is conserved throughout the reaction.
reactant products
C 6 6
O 12 12
H 18 18
The mass of the carbon conserver during the reaction. The reaction is balanced as the number of atoms in the reactant side equals to the product side.
To learn more about cellular respiration here
https://brainly.com/question/12311315
#SPJ4
A number 4 in the blue quadrant of the NFPA 704 system indicate that there is _______________________ risk in this category from the chemical involved.
A number 4 in the blue quadrant of the NFPA 704 system indicate that there is cause death or major injury risk in this category from the chemical involved.
What does 4 mean on NFPA?OSHA's Classification System and NFPA Rating 0-4 0-least dangerous 4th most dangerous 1-most serious hazard 4-least serious hazard • Hazard category numbers are not required on labels but must be included on SDSs in Section 2.
The blue, red, and yellow fields (health, flammability, and reactivity) all use a 0 to 4 scale. A value of zero indicates that the material poses virtually no risk; a value of four indicates extreme danger.
Thus, A number 4 in the blue quadrant of the NFPA 704 system indicate that there is cause death or major injury risk.
To learn more about NFPA, follow the link;
https://brainly.com/question/26300100
#SPJ1
modify isoleucine to show its structure at ph 1 and ph 13. modify each amino acid by adding or removing atoms or bonds and by adding charges where appropriate.
Isoleucine is an amino acid that has the following structure at a pH of 1:
What is isoleucine?
Isoleucine is an essential amino acid, which means that the human body cannot produce it and it must be obtained through diet. Isoleucine is one of the 20 standard amino acids that are commonly found in proteins. It has a specific chemical structure of H3N-C(CH3)3-COOH. Isoleucine has an aliphatic side chain with a branched carbon skeleton.
H3N-C(CH3)3-COOH
At a pH of 1, isoleucine is in its acidic form, with a carboxyl group (-COOH) that is ionized and carries a negative charge. This ionization occurs when a hydrogen ion (H+) is removed from the carboxyl group, making it -COO-.
At a pH of 13, isoleucine is in its basic form, with a carboxyl group (-COOH) that is fully ionized and carries a negative charge. This ionization occurs when a hydrogen ion (H+) is removed from the carboxyl group, making it -COO-.
To show the structure of isoleucine at a pH of 1:
H3N-C(CH3)3-COO-
To show the structure of isoleucine at a pH of 13:
H3N-C(CH3)3-COO-
To learn more about isoleucine from the given link:
https://brainly.com/question/4518186
#SPJ4
Consider the reaction.
PCl5(g)↽−−⇀PCl3(g)+Cl2(g)=0.042
The concentrations of the products at equilibrium are [PCl3]=0.28 M and [Cl2]=0.10 M .
What is the concentration of the reactant, PCl5 , at equilibrium?
Answer:
0.067 M
Explanation:
The given equilibrium concentrations of the products are [PCl3]=0.28 M and [Cl2]=0.10 M.
Substitute these values into the expression for Kc to find the equilibrium concentration of the reactant, PCl5:
Kc = (0.28 M)(0.10 M) / [PCl5] = 0.042
Solving for [PCl5], you get:
[PCl5] = (0.28 M)(0.10 M) / 0.042 = 0.067 M
Therefore, the concentration of the reactant, PCl5, at equilibrium is 0.067 M.
Select the equation that has the following mole ratio:
2:6:2:3
a
Li3PO4 + 3KCl → 3LiCl + K3PO4
b
NaOH + HCl → NaCl + H2O
c
Na2O + CaCl2 → 2NaCl + CaO
d
2Al + 6HCl → 2AlCl3 + 3H2
The chemical equation which has the given mole ratio is 2 Al + 6 HCl → 2 AlCl₃ + 3 H₂.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ1
Which of the following chemical exposure factors relates to how a seemingly small exposure can be extremely toxic, even deadly?1. Route of exposure2. Toxicity, or lvel of harm posed by a chemical3. Hazard class4. How many pictograms are present on the label
(2) Toxicity, or level of harm posed by a chemical shows how a seemingly small exposure can be extremely toxic or even deadly.
Toxicity is a chemical property that describes a substance's ability to negatively disintegrate another chemical or biological environment. Any oxidizing agent that causes corrosion on a metallic surface acts as a toxin in relation to the substrate and environment.
Organic or inorganic substances called corrosion inhibitors are used to prevent corrosion on metallic surfaces by establishing a protective coating on the surface. These inhibitors or other chemicals (such coatings or solvents) used to cure or prevent corrosion may occasionally be released into the environment as waste products. They then cause pollution and have chemically unstable characteristics, which make them toxic to living things. These chemical compounds break down into various forms in water, air, and oil. When possible, less harmful corrosion inhibitors ought to be utilized.
Learn more about corrosion here:
https://brainly.com/question/30057568
#SPJ4
